Regression 2.6.34->2.6.35-rc4: radeaon KMS an RS690 broken

[Torsten Kaiser]

On Tue, Jul 13, 2010 at 9:10 PM, Alex Deucher <alexdeucher at gmail.com> wrote:
> On Tue, Jul 13, 2010 at 2:29 PM, Torsten Kaiser
> <just.for.lkml at googlemail.com> wrote:
>> But the CP is still broken:
>
> Is this a regression?  If so, can you bisect it?
>
> Alex

I bisected it to this commit:

d594e46ace22afa1621254f6f669e65430048153 is the first bad commit
commit d594e46ace22afa1621254f6f669e65430048153
Author: Jerome Glisse <jglisse at redhat.com>
Date:   Wed Feb 17 21:54:29 2010 +0000

    drm/radeon/kms: simplify memory controller setup V2

    Get rid of _location and use _start/_end also simplify the
    computation of vram_start|end & gtt_start|end. For R1XX-R2XX
    we place VRAM at the same address of PCI aperture, those GPU
    shouldn't have much memory and seems to behave better when
    setup that way. For R3XX and newer we place VRAM at 0. For
    R6XX-R7XX AGP we place VRAM before or after AGP aperture this
    might limit to limit the VRAM size but it's very unlikely.
    For IGP we don't change the VRAM placement.

    Tested on (compiz,quake3,suspend/resume):
    PCI/PCIE:RV280,R420,RV515,RV570,RV610,RV710
    AGP:RV100,RV280,R420,RV350,RV620(RPB*),RV730
    IGP:RS480(RPB*),RS690,RS780(RPB*),RS880

    RPB: resume previously broken

    V2 correct commit message to reflect more accurately the bug
    and move VRAM placement to 0 for most of the GPU to avoid
    limiting VRAM.

    Signed-off-by: Jerome Glisse <jglisse at redhat.com>
    Signed-off-by: Dave Airlie <airlied at redhat.com>

:040000 040000 05c1e456fcf6565aa8711e4933807956d0055cca
792c6be2bd161a52500c5e8d685ee651cd5af07e M     drivers

HTH, Torsten

>> [    0.426931] Linux agpgart interface v0.103
>> [    0.427092] [drm] Initialized drm 1.1.0 20060810
>> [    0.427196] [drm] radeon defaulting to kernel modesetting.
>> [    0.427255] [drm] radeon kernel modesetting enabled.
>> [    0.427372] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>> [    0.429659] [drm] initializing kernel modesetting (RS690 0x1002:0x791E).
>> [    0.429817] [drm] register mmio base: 0xFE9F0000
>> [    0.429876] [drm] register mmio size: 65536
>> [    0.430457] ATOM BIOS: ATI
>> [    0.430532] radeon 0000:01:05.0: VRAM: 32M 0xDE000000 - 0xDFFFFFFF (32M used)
>> [    0.430592] radeon 0000:01:05.0: GTT: 512M 0xBE000000 - 0xDDFFFFFF
>> [    0.430675] [drm] radeon: irq initialized.
>> [    0.430737] mtrr: type mismatch for fc000000,2000000 old:
>> write-back new: write-comb
>> ining
>> [    0.430811] [drm] Detected VRAM RAM=32M, BAR=32M
>> [    0.430868] [drm] RAM width 128bits DDR
>> [    0.431011] [TTM] Zone  kernel: Available graphics memory: 2010234 kiB.
>> [    0.431070] [TTM] Initializing pool allocator.
>> [    0.431147] [drm] radeon: 32M of VRAM memory ready
>> [    0.431205] [drm] radeon: 512M of GTT memory ready.
>> [    0.431266] [drm] GART: num cpu pages 131072, num gpu pages 131072
>> [    0.434654] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
>> [    0.441719] [drm] Loading RS690/RS740 Microcode
>> [    0.441926] [drm] radeon: ring at 0x00000000BE000000
>> [    0.577118] [drm:r100_ring_test] *ERROR* radeon: ring test failed
>> (sracth(0x15E4)=0x
>> CAFEDEAD)
>> [    0.577192] [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
>> [    0.577252] radeon 0000:01:05.0: failled initializing CP (-22).
>> [    0.577310] radeon 0000:01:05.0: Disabling GPU acceleration
>> [    0.577440] [drm] radeon: cp finalized
>> [    0.578078] [drm] Default TV standard: NTSC
>> [    0.578314] [drm] Default TV standard: NTSC
>> [    0.578590] [drm] Radeon Display Connectors
>> [    0.578648] [drm] Connector 0:
>> [    0.578706] [drm]   VGA
>> [    0.578764] [drm]   DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48
>> 0x7e5c 0x7e4c
>> [    0.578837] [drm]   Encoders:
>> [    0.578894] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
>> [    0.578952] [drm] Connector 1:
>> [    0.579010] [drm]   S-video
>> [    0.579067] [drm]   Encoders:
>> [    0.579124] [drm]     TV1: INTERNAL_KLDSCP_DAC1
>> [    0.579182] [drm] Connector 2:
>> [    0.579239] [drm]   HDMI-A
>> [    0.579297] [drm]   DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58
>> 0x7e4c 0x7e5c
>> [    0.579369] [drm]   Encoders:
>> [    0.579427] [drm]     DFP3: INTERNAL_LVTM1
>> [    0.773375] [drm] fb mappable at 0xFC040000
>> [    0.773434] [drm] vram apper at 0xFC000000
>> [    0.773491] [drm] size 786432
>> [    0.773549] [drm] fb depth is 8
>> [    0.773606] [drm]    pitch is 1024
>> [    0.773737] fbcon: radeondrmfb (fb0) is primary device
>> [    0.793240] Console: switching to colour frame buffer device 128x48
>> [    0.794833] fb0: radeondrmfb frame buffer device
>> [    0.794852] drm: registered panic notifier
>> [    0.794871] Slow work thread pool: Starting up
>> [    0.794932] Slow work thread pool: Ready
>> [    0.794953] [drm] Initialized radeon 2.5.0 20080528 for
>> 0000:01:05.0 on minor 0
>>
>>
>> Torsten
>>
>