[PATCH] RFCv2: omapdrm DRM/KMS driver for TI OMAP platforms

Inki Dae inki.dae at samsung.com
Mon Sep 19 00:44:54 PDT 2011


Hello Rob.

Is there some reason that you don't head your driver gpu/drm, just staging?
and below is my short comments. thank you.

> -----Original Message-----
> From: Rob Clark [mailto:robdclark at gmail.com] On Behalf Of Rob Clark
> Sent: Sunday, September 18, 2011 6:32 AM
> To: dri-devel at lists.freedesktop.org
> Cc: patches at linaro.org; Inki Dae; Rob Clark
> Subject: [PATCH] RFCv2: omapdrm DRM/KMS driver for TI OMAP platforms
> 
> From: Rob Clark <rob at ti.com>
> 
> A DRM display driver for TI OMAP platform.  Similar to omapfb (fbdev)
> and omap_vout (v4l2 display) drivers in the past, this driver uses the
> DSS2 driver to access the display hardware, including support for
> HDMI, DVI, and various types of LCD panels.  And it implements GEM
> support for buffer allocation (for KMS as well as offscreen buffers
> used by the xf86-video-omap userspace xorg driver).
> 
> The driver maps CRTCs to overlays, encoders to overlay-managers, and
> connectors to dssdev's.  Note that this arrangement might change slightly
> when support for drm_plane overlays is added.
> 
> For GEM support, non-scanout buffers are using the shmem backed pages
> provided by GEM core (In drm_gem_object_init()).  In the case of scanout
> buffers, which need to be physically contiguous, those are allocated
> with CMA and use drm_gem_private_object_init().
> 
> See userspace xorg driver:
> git://github.com/robclark/xf86-video-omap.git
> 
> Refer to this link for CMA (Continuous Memory Allocator):
> http://lkml.org/lkml/2011/8/19/302
> 
> Links to previous versions of the patch:
> v1: http://lwn.net/Articles/458137/
> 
> History:
> 
> v2: replace omap_vram with CMA for scanout buffer allocation, remove
>     unneeded functions, use dma_addr_t for physical addresses, error
>     handling cleanup, refactor attach/detach pages into common drm
>     functions, split non-userspace-facing API into omap_priv.h, remove
>     plugin API
> 
> v1: original
> ---
>  drivers/staging/Kconfig                  |    2 +
>  drivers/staging/Makefile                 |    1 +
>  drivers/staging/omapdrm/Kconfig          |   24 +
>  drivers/staging/omapdrm/Makefile         |    9 +
>  drivers/staging/omapdrm/TODO.txt         |   14 +
>  drivers/staging/omapdrm/omap_connector.c |  357 ++++++++++++++
>  drivers/staging/omapdrm/omap_crtc.c      |  332 +++++++++++++
>  drivers/staging/omapdrm/omap_drv.c       |  766
> ++++++++++++++++++++++++++++++
>  drivers/staging/omapdrm/omap_drv.h       |  126 +++++
>  drivers/staging/omapdrm/omap_encoder.c   |  188 ++++++++
>  drivers/staging/omapdrm/omap_fb.c        |  259 ++++++++++
>  drivers/staging/omapdrm/omap_fbdev.c     |  309 ++++++++++++
>  drivers/staging/omapdrm/omap_gem.c       |  720
> ++++++++++++++++++++++++++++
>  drivers/video/omap2/omapfb/Kconfig       |    2 +-
>  include/drm/Kbuild                       |    1 +
>  include/drm/omap_drm.h                   |  111 +++++
>  include/drm/omap_priv.h                  |   42 ++
>  17 files changed, 3262 insertions(+), 1 deletions(-)
>  create mode 100644 drivers/staging/omapdrm/Kconfig
>  create mode 100644 drivers/staging/omapdrm/Makefile
>  create mode 100644 drivers/staging/omapdrm/TODO.txt
>  create mode 100644 drivers/staging/omapdrm/omap_connector.c
>  create mode 100644 drivers/staging/omapdrm/omap_crtc.c
>  create mode 100644 drivers/staging/omapdrm/omap_drv.c
>  create mode 100644 drivers/staging/omapdrm/omap_drv.h
>  create mode 100644 drivers/staging/omapdrm/omap_encoder.c
>  create mode 100644 drivers/staging/omapdrm/omap_fb.c
>  create mode 100644 drivers/staging/omapdrm/omap_fbdev.c
>  create mode 100644 drivers/staging/omapdrm/omap_gem.c
>  create mode 100644 include/drm/omap_drm.h
>  create mode 100644 include/drm/omap_priv.h
> 
> diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
> index 06c9081..09d20a3 100644
> --- a/drivers/staging/Kconfig
> +++ b/drivers/staging/Kconfig
> @@ -150,4 +150,6 @@ source "drivers/staging/mei/Kconfig"
> 
>  source "drivers/staging/nvec/Kconfig"
> 
> +source "drivers/staging/omapdrm/Kconfig"
> +
>  endif # STAGING
> diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
> index f3c5e33..9a24050 100644
> --- a/drivers/staging/Makefile
> +++ b/drivers/staging/Makefile
> @@ -66,3 +66,4 @@ obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)	+=
> ste_rmi4/
>  obj-$(CONFIG_DRM_PSB)		+= gma500/
>  obj-$(CONFIG_INTEL_MEI)		+= mei/
>  obj-$(CONFIG_MFD_NVEC)		+= nvec/
> +obj-$(CONFIG_DRM_OMAP)		+= omapdrm/
> diff --git a/drivers/staging/omapdrm/Kconfig
> b/drivers/staging/omapdrm/Kconfig
> new file mode 100644
> index 0000000..bd0d1bd
> --- /dev/null
> +++ b/drivers/staging/omapdrm/Kconfig
> @@ -0,0 +1,24 @@
> +
> +config DRM_OMAP
> +	tristate "OMAP DRM (EXPERIMENTAL)"
> +	depends on DRM && !CONFIG_FB_OMAP2
> +	select DRM_KMS_HELPER
> +	select OMAP2_DSS
> +	select FB_SYS_FILLRECT
> +	select FB_SYS_COPYAREA
> +	select FB_SYS_IMAGEBLIT
> +	select FB_SYS_FOPS
> +	default n
> +	help
> +	  DRM display driver for OMAP2/3/4 based boards.
> +
> +config DRM_OMAP_NUM_CRTCS
> +	int "Number of CRTCs"
> +	range 1 10
> +	default 1  if ARCH_OMAP2 || ARCH_OMAP3
> +	default 2  if ARCH_OMAP4
> +	depends on DRM_OMAP
> +	help
> +	  Select the number of video overlays which can be used as
> framebuffers.
> +	  The remaining overlays are reserved for video.
> +
> diff --git a/drivers/staging/omapdrm/Makefile
> b/drivers/staging/omapdrm/Makefile
> new file mode 100644
> index 0000000..d0d6c20
> --- /dev/null
> +++ b/drivers/staging/omapdrm/Makefile
> @@ -0,0 +1,9 @@
> +#
> +# Makefile for the drm device driver.  This driver provides support for
> the
> +# Direct Rendering Infrastructure (DRI)
> +#
> +
> +ccflags-y := -Iinclude/drm -Werror
> +omapdrm-y := omap_drv.o omap_crtc.o omap_encoder.o omap_connector.o
> omap_fb.o omap_fbdev.o omap_gem.o
> +
> +obj-$(CONFIG_DRM_OMAP)	+= omapdrm.o
> diff --git a/drivers/staging/omapdrm/TODO.txt
> b/drivers/staging/omapdrm/TODO.txt
> new file mode 100644
> index 0000000..af81989
> --- /dev/null
> +++ b/drivers/staging/omapdrm/TODO.txt
> @@ -0,0 +1,14 @@
> +TODO
> +. check error handling/cleanup paths
> +. add drm_plane / overlay support
> +. add video decode/encode support (via syslink3 + codec-engine)
> +. still some rough edges with flipping.. event back to userspace should
> +  really come after VSYNC interrupt
> +
> +Userspace:
> +. git://github.com/robclark/xf86-video-omap.git
> +
> +Currently tested on
> +. OMAP3530 beagleboard
> +. OMAP4430 pandaboard
> +. OMAP4460 pandaboard
> diff --git a/drivers/staging/omapdrm/omap_connector.c
> b/drivers/staging/omapdrm/omap_connector.c
> new file mode 100644
> index 0000000..c41d84f
> --- /dev/null
> +++ b/drivers/staging/omapdrm/omap_connector.c
> @@ -0,0 +1,357 @@
> +/*
> + * linux/drivers/staging/omapdrm/omap_connector.c
> + *
> + * Copyright (C) 2011 Texas Instruments
> + * Author: Rob Clark <rob at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "omap_drv.h"
> +
> +#include "drm_crtc.h"
> +#include "drm_crtc_helper.h"
> +
> +/*
> + * connector funcs
> + */
> +
> +#define to_omap_connector(x) container_of(x, struct omap_connector, base)
> +
> +struct omap_connector {
> +	struct drm_connector base;
> +	struct omap_dss_device *dssdev;
> +};
> +
> +static inline void copy_timings_omap_to_drm(struct drm_display_mode
*mode,
> +		struct omap_video_timings *timings)
> +{
> +	mode->clock = timings->pixel_clock;
> +
> +	mode->hdisplay = timings->x_res;
> +	mode->hsync_start = mode->hdisplay + timings->hfp;
> +	mode->hsync_end = mode->hsync_start + timings->hsw;
> +	mode->htotal = mode->hsync_end + timings->hbp;
> +
> +	mode->vdisplay = timings->y_res;
> +	mode->vsync_start = mode->vdisplay + timings->vfp;
> +	mode->vsync_end = mode->vsync_start + timings->vsw;
> +	mode->vtotal = mode->vsync_end + timings->vbp;
> +
> +	/* note: whether or not it is interlaced, +/- h/vsync, etc,
> +	 * which should be set in the mode flags, is not exposed in
> +	 * the omap_video_timings struct.. but hdmi driver tracks
> +	 * those separately so all we have to have to set the mode
> +	 * is the way to recover these timings values, and the
> +	 * omap_dss_driver would do the rest.
> +	 */
> +}
> +
> +static inline void copy_timings_drm_to_omap(struct omap_video_timings
> *timings,
> +		struct drm_display_mode *mode)
> +{
> +	timings->pixel_clock = mode->clock;
> +
> +	timings->x_res = mode->hdisplay;
> +	timings->hfp = mode->hsync_start - mode->hdisplay;
> +	timings->hsw = mode->hsync_end - mode->hsync_start;
> +	timings->hbp = mode->htotal - mode->hsync_end;
> +
> +	timings->y_res = mode->vdisplay;
> +	timings->vfp = mode->vsync_start - mode->vdisplay;
> +	timings->vsw = mode->vsync_end - mode->vsync_start;
> +	timings->vbp = mode->vtotal - mode->vsync_end;
> +}
> +
> +void omap_connector_dpms(struct drm_connector *connector, int mode)
> +{
> +	struct omap_connector *omap_connector =
> to_omap_connector(connector);
> +	struct omap_dss_device *dssdev = omap_connector->dssdev;
> +	int ret;
> +
> +	DBG("%s: %d", dssdev->name, mode);
> +
> +	if (mode == DRM_MODE_DPMS_ON) {
> +		/* store resume info for suspended displays */
> +		switch (dssdev->state) {
> +		case OMAP_DSS_DISPLAY_SUSPENDED:
> +			dssdev->activate_after_resume = true;
> +			break;
> +		case OMAP_DSS_DISPLAY_DISABLED:
> +			ret = dssdev->driver->enable(dssdev);
> +			if (ret) {
> +				DBG("%s: failed to enable: %d",
dssdev->name,
> ret);
> +				dssdev->driver->disable(dssdev);
> +			}
> +			break;
> +		default:
> +			break;
> +		}
> +	} else {
> +		/* TODO */
> +	}
> +}
> +
> +enum drm_connector_status omap_connector_detect(
> +		struct drm_connector *connector, bool force)
> +{
> +	struct omap_connector *omap_connector =
> to_omap_connector(connector);
> +	struct omap_dss_device *dssdev = omap_connector->dssdev;
> +	struct omap_dss_driver *dssdrv = dssdev->driver;
> +	enum drm_connector_status ret;
> +
> +	if (dssdrv->detect) {
> +		if (dssdrv->detect(dssdev)) {
> +			ret = connector_status_connected;
> +		} else {
> +			ret = connector_status_disconnected;
> +		}
> +	} else {
> +		ret = connector_status_unknown;
> +	}
> +
> +	VERB("%s: %d (force=%d)", omap_connector->dssdev->name, ret, force);
> +
> +	return ret;
> +}
> +
> +static void omap_connector_destroy(struct drm_connector *connector)
> +{
> +	struct omap_connector *omap_connector =
> to_omap_connector(connector);
> +	struct omap_dss_device *dssdev = omap_connector->dssdev;
> +
> +	dssdev->driver->disable(dssdev);
> +
> +	DBG("%s", omap_connector->dssdev->name);
> +	drm_sysfs_connector_remove(connector);
> +	drm_connector_cleanup(connector);
> +	kfree(omap_connector);
> +
> +	omap_dss_put_device(dssdev);
> +}
> +
> +#define MAX_EDID  512
> +
> +static int omap_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct omap_connector *omap_connector =
> to_omap_connector(connector);
> +	struct omap_dss_device *dssdev = omap_connector->dssdev;
> +	struct omap_dss_driver *dssdrv = dssdev->driver;
> +	struct drm_device *dev = connector->dev;
> +	int n = 0;
> +
> +	DBG("%s", omap_connector->dssdev->name);
> +
> +	/* if display exposes EDID, then we parse that in the normal way to
> +	 * build table of supported modes.. otherwise (ie. fixed resolution
> +	 * LCD panels) we just return a single mode corresponding to the
> +	 * currently configured timings:
> +	 */
> +	if (dssdrv->read_edid) {
> +		void *edid = kzalloc(MAX_EDID, GFP_KERNEL);
> +
> +		if ((dssdrv->read_edid(dssdev, edid, MAX_EDID) > 0) &&
> +				drm_edid_is_valid(edid)) {
> +			drm_mode_connector_update_edid_property(connector,
> edid);
> +			n = drm_add_edid_modes(connector, edid);
> +			kfree(connector->display_info.raw_edid);
> +			connector->display_info.raw_edid = edid;
> +		} else {
> +			drm_mode_connector_update_edid_property(connector,
> NULL);
> +			connector->display_info.raw_edid = NULL;
> +			kfree(edid);
> +		}
> +	} else {
> +		struct drm_display_mode *mode = drm_mode_create(dev);
> +		struct omap_video_timings timings;
> +
> +		dssdrv->get_timings(dssdev, &timings);
> +
> +		copy_timings_omap_to_drm(mode, &timings);
> +
> +		mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +		drm_mode_set_name(mode);
> +		drm_mode_probed_add(connector, mode);
> +
> +		n = 1;
> +	}
> +
> +	return n;
> +}
> +
> +static int omap_connector_mode_valid(struct drm_connector *connector,
> +				 struct drm_display_mode *mode)
> +{
> +	struct omap_connector *omap_connector =
> to_omap_connector(connector);
> +	struct omap_dss_device *dssdev = omap_connector->dssdev;
> +	struct omap_dss_driver *dssdrv = dssdev->driver;
> +	struct omap_video_timings timings = {0};
> +	struct drm_device *dev = connector->dev;
> +	struct drm_display_mode *new_mode;
> +	int ret = MODE_BAD;
> +
> +	copy_timings_drm_to_omap(&timings, mode);
> +	mode->vrefresh = drm_mode_vrefresh(mode);
> +
> +	if (!dssdrv->check_timings(dssdev, &timings)) {
> +		/* check if vrefresh is still valid */
> +		new_mode = drm_mode_duplicate(dev, mode);
> +		new_mode->clock = timings.pixel_clock;
> +		new_mode->vrefresh = 0;
> +		if (mode->vrefresh == drm_mode_vrefresh(new_mode))
> +			ret = MODE_OK;
> +		drm_mode_destroy(dev, new_mode);
> +	}
> +
> +	DBG("connector: mode %s: "
> +			"%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
> +			(ret == MODE_OK) ? "valid" : "invalid",
> +			mode->base.id, mode->name, mode->vrefresh,
mode->clock,
> +			mode->hdisplay, mode->hsync_start,
> +			mode->hsync_end, mode->htotal,
> +			mode->vdisplay, mode->vsync_start,
> +			mode->vsync_end, mode->vtotal, mode->type, mode-
> >flags);
> +
> +	return ret;
> +}
> +
> +struct drm_encoder * omap_connector_attached_encoder(
> +		struct drm_connector *connector)
> +{
> +	int i;
> +	struct omap_connector *omap_connector =
> to_omap_connector(connector);
> +
> +	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
> +		struct drm_mode_object *obj;
> +
> +		if (connector->encoder_ids[i] == 0)
> +			break;
> +
> +		obj = drm_mode_object_find(connector->dev,
> +				connector->encoder_ids[i],
> +				DRM_MODE_OBJECT_ENCODER);
> +
> +		if (obj) {
> +			struct drm_encoder *encoder = obj_to_encoder(obj);
> +			struct omap_overlay_manager *mgr =
> +					omap_encoder_get_manager(encoder);
> +			DBG("%s: found %s", omap_connector->dssdev->name,
> +					mgr->name);
> +			return encoder;
> +		}
> +	}
> +
> +	DBG("%s: no encoder", omap_connector->dssdev->name);
> +
> +	return NULL;
> +}
> +
> +static const struct drm_connector_funcs omap_connector_funcs = {
> +	.dpms = drm_helper_connector_dpms,
> +	.detect = omap_connector_detect,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = omap_connector_destroy,
> +};
> +
> +static const struct drm_connector_helper_funcs
> omap_connector_helper_funcs = {
> +	.get_modes = omap_connector_get_modes,
> +	.mode_valid = omap_connector_mode_valid,
> +	.best_encoder = omap_connector_attached_encoder,
> +};
> +
> +/* called from encoder when mode is set, to propagate settings to the
> dssdev */
> +void omap_connector_mode_set(struct drm_connector *connector,
> +		struct drm_display_mode *mode)
> +{
> +	struct drm_device *dev = connector->dev;
> +	struct omap_connector *omap_connector =
> to_omap_connector(connector);
> +	struct omap_dss_device *dssdev = omap_connector->dssdev;
> +	struct omap_dss_driver *dssdrv = dssdev->driver;
> +	struct omap_video_timings timings;
> +
> +	copy_timings_drm_to_omap(&timings, mode);
> +
> +	DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x
> 0x%x",
> +			omap_connector->dssdev->name,
> +			mode->base.id, mode->name, mode->vrefresh,
mode->clock,
> +			mode->hdisplay, mode->hsync_start,
> +			mode->hsync_end, mode->htotal,
> +			mode->vdisplay, mode->vsync_start,
> +			mode->vsync_end, mode->vtotal, mode->type, mode-
> >flags);
> +
> +	if (dssdrv->check_timings(dssdev, &timings)) {
> +		dev_err(dev->dev, "could not set timings\n");
> +		return;
> +	}
> +
> +	dssdrv->set_timings(dssdev, &timings);
> +}
> +
> +/* flush an area of the framebuffer (in case of manual update display
> that
> + * is not automatically flushed)
> + */
> +void omap_connector_flush(struct drm_connector *connector,
> +		int x, int y, int w, int h)
> +{
> +	struct omap_connector *omap_connector =
> to_omap_connector(connector);
> +
> +	/* TODO: enable when supported in dss */
> +	VERB("%s: %d,%d, %dx%d", omap_connector->dssdev->name, x, y, w, h);
> +}
> +
> +/* initialize connector */
> +struct drm_connector * omap_connector_init(struct drm_device *dev,
> +		int connector_type, struct omap_dss_device *dssdev)
> +{
> +	struct drm_connector *connector = NULL;
> +	struct omap_connector *omap_connector;
> +
> +	DBG("%s", dssdev->name);
> +
> +	omap_dss_get_device(dssdev);
> +
> +	omap_connector = kzalloc(sizeof(struct omap_connector), GFP_KERNEL);
> +	if (!omap_connector) {
> +		dev_err(dev->dev, "could not allocate connector\n");
> +		goto fail;
> +	}
> +
> +	omap_connector->dssdev = dssdev;
> +	connector = &omap_connector->base;
> +
> +	drm_connector_init(dev, connector, &omap_connector_funcs,
> +				connector_type);
> +	drm_connector_helper_add(connector, &omap_connector_helper_funcs);
> +
> +#if 0 /* enable when dss2 supports hotplug */
> +	if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_HPD)
> +		connector->polled = 0;
> +	else
> +#endif

How about removing the codes above until dss2 supports hotplug?


> +		connector->polled = DRM_CONNECTOR_POLL_CONNECT |
> +				DRM_CONNECTOR_POLL_DISCONNECT;
> +
> +	connector->interlace_allowed = 1;
> +	connector->doublescan_allowed = 0;
> +
> +	drm_sysfs_connector_add(connector);
> +
> +	return connector;
> +
> +fail:
> +	if (connector) {
> +		omap_connector_destroy(connector);
> +	}
> +
> +	return NULL;
> +}
> diff --git a/drivers/staging/omapdrm/omap_crtc.c
> b/drivers/staging/omapdrm/omap_crtc.c
> new file mode 100644
> index 0000000..7da36ba
> --- /dev/null
> +++ b/drivers/staging/omapdrm/omap_crtc.c
> @@ -0,0 +1,332 @@
> +/*
> + * linux/drivers/staging/omapdrm/omap_crtc.c
> + *
> + * Copyright (C) 2011 Texas Instruments
> + * Author: Rob Clark <rob at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "omap_drv.h"
> +
> +#include "drm_mode.h"
> +#include "drm_crtc.h"
> +#include "drm_crtc_helper.h"
> +
> +#define to_omap_crtc(x) container_of(x, struct omap_crtc, base)
> +
> +struct omap_crtc {
> +	struct drm_crtc base;
> +	struct omap_overlay *ovl;
> +	struct omap_overlay_info info;
> +	int id;
> +
> +	/* if there is a pending flip, this will be non-null: */
> +	struct drm_pending_vblank_event *event;
> +};
> +
> +/* push changes down to dss2 */
> +static int commit(struct drm_crtc *crtc)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +	struct omap_overlay *ovl = omap_crtc->ovl;
> +	struct omap_overlay_info *info = &omap_crtc->info;
> +	int ret;
> +
> +	DBG("%s", omap_crtc->ovl->name);
> +	DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info-
> >out_width,
> +			info->out_height, info->screen_width);
> +	DBG("%d,%d %p %08x", info->pos_x, info->pos_y, info->vaddr,
> +			info->paddr);
> +
> +	/* NOTE: do we want to do this at all here, or just wait
> +	 * for dpms(ON) since other CRTC's may not have their mode
> +	 * set yet, so fb dimensions may still change..
> +	 */
> +	ret = ovl->set_overlay_info(ovl, info);
> +	if (ret) {
> +		dev_err(dev->dev, "could not set overlay info\n");
> +		return ret;
> +	}
> +
> +	/* our encoder doesn't necessarily get a commit() after this, in
> +	 * particular in the dpms() and mode_set_base() cases, so force the
> +	 * manager to update:
> +	 *
> +	 * could this be in the encoder somehow?
> +	 */
> +	if (ovl->manager) {
> +		ret = ovl->manager->apply(ovl->manager);
> +		if (ret) {
> +			dev_err(dev->dev, "could not apply\n");
> +			return ret;
> +		}
> +	}
> +
> +	if (info->enabled) {
> +		omap_framebuffer_flush(crtc->fb, crtc->x, crtc->y,
> +				crtc->fb->width, crtc->fb->height);
> +	}
> +
> +	return 0;
> +}
> +
> +/* update parameters that are dependent on the framebuffer dimensions and
> + * position within the fb that this crtc scans out from. This is called
> + * when framebuffer dimensions or x,y base may have changed, either due
> + * to our mode, or a change in another crtc that is scanning out of the
> + * same fb.
> + */
> +static void update_scanout(struct drm_crtc *crtc)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +	dma_addr_t paddr;
> +	void __iomem *vaddr;
> +	int screen_width;
> +
> +	omap_framebuffer_get_buffer(crtc->fb, crtc->x, crtc->y,
> +			&vaddr, &paddr, &screen_width);
> +
> +	DBG("%s: %d,%d: %p %08x (%d)", omap_crtc->ovl->name,
> +			crtc->x, crtc->y, vaddr, (u32)paddr, screen_width);
> +
> +	omap_crtc->info.paddr = paddr;
> +	omap_crtc->info.vaddr = vaddr;
> +	omap_crtc->info.screen_width = screen_width;
> +}
> +
> +static void omap_crtc_gamma_set(struct drm_crtc *crtc,
> +		u16 *red, u16 *green, u16 *blue, uint32_t start, uint32_t
> size)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +	DBG("%s", omap_crtc->ovl->name);
> +}
> +
> +static void omap_crtc_destroy(struct drm_crtc *crtc)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +	DBG("%s", omap_crtc->ovl->name);
> +	drm_crtc_cleanup(crtc);
> +	kfree(omap_crtc);
> +}
> +
> +static void omap_crtc_dpms(struct drm_crtc *crtc, int mode)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +
> +	DBG("%s: %d", omap_crtc->ovl->name, mode);
> +
> +	if (mode == DRM_MODE_DPMS_ON) {
> +		update_scanout(crtc);

Is there any reason that update_scanout function should be called here to
update buffer address.? I think it's enough to call this function at
mode_set callback.

> +		omap_crtc->info.enabled = true;
> +	} else {
> +		omap_crtc->info.enabled = false;
> +	}
> +
> +	commit(crtc);

and commit callback to apply those data on hw.

> +}
> +
> +static bool omap_crtc_mode_fixup(struct drm_crtc *crtc,
> +				  struct drm_display_mode *mode,
> +				  struct drm_display_mode *adjusted_mode)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +	DBG("%s", omap_crtc->ovl->name);
> +	return true;
> +}
> +
> +static int omap_crtc_mode_set(struct drm_crtc *crtc,
> +			       struct drm_display_mode *mode,
> +			       struct drm_display_mode *adjusted_mode,
> +			       int x, int y,
> +			       struct drm_framebuffer *old_fb)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +
> +	DBG("%s: %d,%d: %dx%d",omap_crtc->ovl->name, x, y,
> +			mode->hdisplay, mode->vdisplay);
> +
> +	/* just use adjusted mode */
> +	mode = adjusted_mode;
> +
> +	omap_crtc->info.width = mode->hdisplay;
> +	omap_crtc->info.height = mode->vdisplay;
> +	omap_crtc->info.out_width = mode->hdisplay;
> +	omap_crtc->info.out_height = mode->vdisplay;
> +	omap_crtc->info.color_mode = OMAP_DSS_COLOR_RGB24U;
> +	omap_crtc->info.rotation_type = OMAP_DSS_ROT_DMA;
> +	omap_crtc->info.rotation = OMAP_DSS_ROT_0;
> +	omap_crtc->info.global_alpha = 0xff;
> +	omap_crtc->info.mirror = 0;
> +	omap_crtc->info.mirror = 0;
> +	omap_crtc->info.pos_x = 0;
> +	omap_crtc->info.pos_y = 0;
> +#if 0 /* re-enable when these are available in DSS2 driver */
> +	omap_crtc->info.zorder = 3;        /* GUI in the front, video behind
> */
> +	omap_crtc->info.min_x_decim = 1;
> +	omap_crtc->info.max_x_decim = 1;
> +	omap_crtc->info.min_y_decim = 1;
> +	omap_crtc->info.max_y_decim = 1;
> +#endif
> +
> +	update_scanout(crtc);
> +
> +	return 0;
> +}
> +
> +static void omap_crtc_prepare(struct drm_crtc *crtc)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +	struct omap_overlay *ovl = omap_crtc->ovl;
> +
> +	DBG("%s", omap_crtc->ovl->name);
> +
> +	ovl->get_overlay_info(ovl, &omap_crtc->info);
> +
> +	omap_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
> +}
> +
> +static void omap_crtc_commit(struct drm_crtc *crtc)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +	DBG("%s", omap_crtc->ovl->name);
> +	omap_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
> +}
> +
> +static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> +		    struct drm_framebuffer *old_fb)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +
> +	DBG("%s %d,%d: fb=%p", omap_crtc->ovl->name, x, y, old_fb);
> +
> +	update_scanout(crtc);
> +
> +	return commit(crtc);
> +}
> +
> +static void omap_crtc_load_lut(struct drm_crtc *crtc)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +	DBG("%s", omap_crtc->ovl->name);
> +}
> +
> +static void page_flip_cb(void *arg)
> +{
> +	struct drm_crtc *crtc = arg;
> +	struct drm_device *dev = crtc->dev;
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +	struct drm_pending_vblank_event *event = omap_crtc->event;
> +	struct timeval now;
> +	unsigned long flags;
> +
> +	WARN_ON(!event);
> +
> +	omap_crtc->event = NULL;
> +
> +	update_scanout(crtc);
> +	commit(crtc);
> +
> +	/* wakeup userspace */
> +	// TODO: this should happen *after* flip.. somehow..
> +	if (event) {
> +		spin_lock_irqsave(&dev->event_lock, flags);
> +		event->event.sequence =
> +				drm_vblank_count_and_time(dev,
omap_crtc->id,
> &now);
> +		event->event.tv_sec = now.tv_sec;
> +		event->event.tv_usec = now.tv_usec;
> +		list_add_tail(&event->base.link,
> +				&event->base.file_priv->event_list);
> +		wake_up_interruptible(&event->base.file_priv->event_wait);
> +		spin_unlock_irqrestore(&dev->event_lock, flags);
> +	}
> +}
> +
> +static int omap_crtc_page_flip_locked(struct drm_crtc *crtc,
> +		 struct drm_framebuffer *fb,
> +		 struct drm_pending_vblank_event *event)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +
> +	DBG("%d -> %d", crtc->fb ? crtc->fb->base.id : -1, fb->base.id);
> +
> +	if (omap_crtc->event) {
> +		dev_err(dev->dev, "already a pending flip\n");
> +		return -EINVAL;
> +	}
> +
> +	crtc->fb = fb;
> +	omap_crtc->event = event;
> +
> +	omap_gem_op_async(omap_framebuffer_bo(fb), OMAP_GEM_READ,
> +			page_flip_cb, crtc);
> +
> +	return 0;
> +}
> +
> +static const struct drm_crtc_funcs omap_crtc_funcs = {
> +	.gamma_set = omap_crtc_gamma_set,
> +	.set_config = drm_crtc_helper_set_config,
> +	.destroy = omap_crtc_destroy,
> +	.page_flip = omap_crtc_page_flip_locked,
> +};
> +
> +static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = {
> +	.dpms = omap_crtc_dpms,
> +	.mode_fixup = omap_crtc_mode_fixup,
> +	.mode_set = omap_crtc_mode_set,
> +	.prepare = omap_crtc_prepare,
> +	.commit = omap_crtc_commit,
> +	.mode_set_base = omap_crtc_mode_set_base,
> +	.load_lut = omap_crtc_load_lut,
> +};
> +
> +struct omap_overlay * omap_crtc_get_overlay(struct drm_crtc *crtc)
> +{
> +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +	return omap_crtc->ovl;
> +}
> +
> +/* initialize crtc */
> +struct drm_crtc * omap_crtc_init(struct drm_device *dev,
> +		struct omap_overlay *ovl, int id)
> +{
> +	struct drm_crtc *crtc = NULL;
> +	struct omap_crtc *omap_crtc = kzalloc(sizeof(*omap_crtc),
> GFP_KERNEL);
> +
> +	DBG("%s", ovl->name);
> +
> +	if (!omap_crtc) {
> +		dev_err(dev->dev, "could not allocate CRTC\n");
> +		goto fail;
> +	}
> +
> +	omap_crtc->ovl = ovl;
> +	omap_crtc->id = id;
> +	crtc = &omap_crtc->base;
> +	drm_crtc_init(dev, crtc, &omap_crtc_funcs);
> +	drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs);
> +
> +	return crtc;
> +
> +fail:
> +	if (crtc) {
> +		drm_crtc_cleanup(crtc);
> +		kfree(omap_crtc);
> +	}
> +	return NULL;
> +}
> diff --git a/drivers/staging/omapdrm/omap_drv.c
> b/drivers/staging/omapdrm/omap_drv.c
> new file mode 100644
> index 0000000..88209f4
> --- /dev/null
> +++ b/drivers/staging/omapdrm/omap_drv.c
> @@ -0,0 +1,766 @@
> +/*
> + * linux/drivers/staging/omapdrm/omap_drv.c
> + *
> + * Copyright (C) 2011 Texas Instruments
> + * Author: Rob Clark <rob at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "omap_drv.h"
> +
> +#include "drm_crtc_helper.h"
> +#include "drm_fb_helper.h"
> +
> +#define DRIVER_NAME		MODULE_NAME
> +#define DRIVER_DESC		"OMAP DRM"
> +#define DRIVER_DATE		"20110917"
> +#define DRIVER_MAJOR		1
> +#define DRIVER_MINOR		0
> +#define DRIVER_PATCHLEVEL	0
> +
> +struct drm_device *drm_device;
> +
> +/* keep track of whether we are already loaded.. we may need to call
> + * plugin's load() if they register after we are already loaded
> + */
> +static bool loaded = false;
> +
> +/*
> + * mode config funcs
> + */
> +
> +/* Notes about mapping DSS and DRM entities:
> + *    CRTC:        overlay
> + *    encoder:     manager.. with some extension to allow one primary
CRTC
> + *                 and zero or more video CRTC's to be mapped to one
encoder?
> + *    connector:   dssdev.. manager can be attached/detached from
> different
> + *                 devices
> + */
> +
> +static void omap_fb_output_poll_changed(struct drm_device *dev)
> +{
> +	struct omap_drm_private *priv = dev->dev_private;
> +	DBG("dev=%p", dev);
> +	if (priv->fbdev) {
> +		drm_fb_helper_hotplug_event(priv->fbdev);
> +	}
> +}
> +
> +static struct drm_mode_config_funcs omap_mode_config_funcs = {
> +	.fb_create = omap_framebuffer_create,
> +	.output_poll_changed = omap_fb_output_poll_changed,
> +};
> +
> +static int get_connector_type(struct omap_dss_device *dssdev)
> +{
> +	switch (dssdev->type) {
> +	case OMAP_DISPLAY_TYPE_HDMI:
> +		return DRM_MODE_CONNECTOR_HDMIA;
> +	case OMAP_DISPLAY_TYPE_DPI:
> +		if (!strcmp(dssdev->name, "dvi"))
> +			return DRM_MODE_CONNECTOR_DVID;
> +	default:
> +		return DRM_MODE_CONNECTOR_Unknown;
> +	}
> +}
> +
> +#if 0 /* enable when dss2 supports hotplug */
> +static int omap_drm_notifier(struct notifier_block *nb,
> +		unsigned long evt, void *arg)
> +{
> +	switch (evt) {
> +	case OMAP_DSS_SIZE_CHANGE:
> +	case OMAP_DSS_HOTPLUG_CONNECT:
> +	case OMAP_DSS_HOTPLUG_DISCONNECT: {
> +		struct drm_device *dev = drm_device;
> +		DBG("hotplug event: evt=%d, dev=%p", evt, dev);
> +		if (dev) {
> +			drm_sysfs_hotplug_event(dev);
> +		}
> +		return NOTIFY_OK;
> +	}
> +	default:  /* don't care about other events for now */
> +		return NOTIFY_DONE;
> +	}
> +}
> +#endif
> +
> +static void dump_video_chains(void)
> +{
> +	int i;
> +
> +	DBG("dumping video chains: ");
> +	for (i = 0; i < omap_dss_get_num_overlays(); i++) {
> +		struct omap_overlay *ovl = omap_dss_get_overlay(i);
> +		struct omap_overlay_manager *mgr = ovl->manager;
> +		struct omap_dss_device *dssdev = mgr ? mgr->device : NULL;
> +		if (dssdev) {
> +			DBG("%d: %s -> %s -> %s", i, ovl->name, mgr->name,
> +						dssdev->name);
> +		} else if (mgr) {
> +			DBG("%d: %s -> %s", i, ovl->name, mgr->name);
> +		} else {
> +			DBG("%d: %s", i, ovl->name);
> +		}
> +	}
> +}
> +
> +static int omap_modeset_init(struct drm_device *dev)
> +{
> +	const struct omap_drm_platform_data *pdata = dev->dev-
> >platform_data;
> +	struct omap_drm_private *priv = dev->dev_private;
> +	struct omap_dss_device *dssdev = NULL;
> +	int i, j;
> +	unsigned int connected_connectors = 0;
> +
> +	/* create encoders for each manager */
> +	int create_encoder(int i) {
> +		struct omap_overlay_manager *mgr =
> +				omap_dss_get_overlay_manager(i);
> +		struct drm_encoder *encoder = omap_encoder_init(dev, mgr);
> +
> +		if (!encoder) {
> +			dev_err(dev->dev, "could not create encoder\n");
> +			return -ENOMEM;
> +		}
> +
> +		priv->encoders[priv->num_encoders++] = encoder;
> +
> +		return 0;
> +	}
> +
> +	/* create connectors for each display device */
> +	int create_connector(struct omap_dss_device *dssdev) {
> +		static struct notifier_block *notifier;
> +		struct drm_connector *connector;
> +
> +		if (!dssdev->driver) {
> +			dev_warn(dev->dev, "%s has no driver.. skipping
it\n",
> +					dssdev->name);
> +			return 0;
> +		}
> +
> +		if (!(dssdev->driver->get_timings ||
> +					dssdev->driver->read_edid)) {
> +			dev_warn(dev->dev, "%s driver does not support "
> +				"get_timings or read_edid.. skipping it!\n",
> +				dssdev->name);
> +			return 0;
> +		}
> +
> +		connector = omap_connector_init(dev,
> +				get_connector_type(dssdev), dssdev);
> +
> +		if (!connector) {
> +			dev_err(dev->dev, "could not create connector\n");
> +			return -ENOMEM;
> +		}
> +
> +		/* track what is already connected.. rather than looping
> thru
> +		 * all connectors twice later, first for connected then for
> +		 * remainder (which could be a race condition if connected
> +		 * status changes)
> +		 */
> +		if (omap_connector_detect(connector, true) ==
> +				connector_status_connected) {
> +			connected_connectors |= (1 << priv->num_connectors);
> +		}
> +
> +		priv->connectors[priv->num_connectors++] = connector;
> +
> +#if 0 /* enable when dss2 supports hotplug */
> +		notifier = kzalloc(sizeof(struct notifier_block),
> GFP_KERNEL);
> +		notifier->notifier_call = omap_drm_notifier;
> +		omap_dss_add_notify(dssdev, notifier);
> +#else
> +		notifier = NULL;
> +#endif
> +
> +		for (j = 0; j < priv->num_encoders; j++) {
> +			struct omap_overlay_manager *mgr =
> +				omap_encoder_get_manager(priv->encoders[j]);
> +			if (mgr->device == dssdev) {
> +				drm_mode_connector_attach_encoder(connector,
> +						priv->encoders[j]);
> +			}
> +		}
> +
> +		return 0;
> +	}
> +
> +	/* create up to max_overlays CRTCs mapping to overlays.. by default,
> +	 * connect the overlays to different managers/encoders, giving
> priority
> +	 * to encoders connected to connectors with a detected connection
> +	 */
> +	int create_crtc(int i) {
> +		struct omap_overlay *ovl = omap_dss_get_overlay(i);
> +		struct omap_overlay_manager *mgr = NULL;
> +		struct drm_crtc *crtc;
> +
> +		if (ovl->manager) {
> +			DBG("disconnecting %s from %s", ovl->name,
> +						ovl->manager->name);
> +			ovl->unset_manager(ovl);
> +		}
> +
> +		/* find next best connector, ones with detected connection
> first
> +		 */
> +		while (j < priv->num_connectors && !mgr) {
> +			if (connected_connectors & (1 << j)) {
> +				struct drm_encoder * encoder =
> +					omap_connector_attached_encoder(
> +
priv->connectors[j]);
> +				if (encoder) {
> +					mgr =
omap_encoder_get_manager(encoder);
> +				}
> +			}
> +			j++;
> +		}
> +
> +		/* if we couldn't find another connected connector, lets
> start
> +		 * looking at the unconnected connectors:
> +		 */
> +		while (j < 2 * priv->num_connectors && !mgr) {
> +			int idx = j - priv->num_connectors;
> +			if (!(connected_connectors & (1 << idx))) {
> +				struct drm_encoder * encoder =
> +					omap_connector_attached_encoder(
> +
priv->connectors[idx]);
> +				if (encoder) {
> +					mgr =
omap_encoder_get_manager(encoder);
> +				}
> +			}
> +			j++;
> +		}
> +
> +		if (mgr) {
> +			DBG("connecting %s to %s", ovl->name, mgr->name);
> +			ovl->set_manager(ovl, mgr);
> +		}
> +
> +		crtc = omap_crtc_init(dev, ovl, priv->num_crtcs);
> +
> +		if (!crtc) {
> +			dev_err(dev->dev, "could not create CRTC\n");
> +			return -ENOMEM;
> +		}
> +
> +		priv->crtcs[priv->num_crtcs++] = crtc;
> +
> +		return 0;
> +	}
> +
> +	drm_mode_config_init(dev);
> +
> +	if (pdata) {
> +		/* if platform data is provided by the board file, use it to
> +		 * control which overlays, managers, and devices we own.
> +		 */
> +		for (i = 0; i < pdata->mgr_cnt; i++) {
> +			create_encoder(pdata->mgr_ids[i]);
> +		}
> +
> +		for (i = 0; i < pdata->dev_cnt; i++) {
> +			int m(struct omap_dss_device *dssdev, void *data) {
> +				return ! strcmp(dssdev->name, data);
> +			}
> +			struct omap_dss_device *dssdev =
> +				omap_dss_find_device(
> +					(void *)pdata->dev_names[i], m);
> +			if (!dssdev) {
> +				dev_warn(dev->dev, "no such dssdev: %s\n",
> +						pdata->dev_names[i]);
> +				continue;
> +			}
> +			create_connector(dssdev);
> +		}
> +
> +		j = 0;
> +		for (i = 0; i < pdata->ovl_cnt; i++) {
> +			create_crtc(pdata->ovl_ids[i]);
> +		}
> +	} else {
> +		/* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and
> try
> +		 * to make educated guesses about everything else
> +		 */
> +		int max_overlays = min(omap_dss_get_num_overlays(),
> +					CONFIG_DRM_OMAP_NUM_CRTCS);
> +
> +		for (i = 0; i < omap_dss_get_num_overlay_managers(); i++) {
> +			create_encoder(i);
> +		}
> +
> +		for_each_dss_dev(dssdev) {
> +			create_connector(dssdev);
> +		}
> +
> +		j = 0;
> +		for (i = 0; i < max_overlays; i++) {
> +			create_crtc(i);
> +		}
> +	}
> +
> +	/* for now keep the mapping of CRTCs and encoders static.. */
> +	for (i = 0; i < priv->num_encoders; i++) {
> +		struct drm_encoder *encoder = priv->encoders[i];
> +		struct omap_overlay_manager *mgr =
> +				omap_encoder_get_manager(encoder);
> +
> +		encoder->possible_crtcs = 0;
> +
> +		for (j = 0; j < priv->num_crtcs; j++) {
> +			struct omap_overlay *ovl =
> +
omap_crtc_get_overlay(priv->crtcs[j]);
> +			if (ovl->manager == mgr) {
> +				encoder->possible_crtcs |= (1 << j);
> +			}
> +		}
> +
> +		DBG("%s: possible_crtcs=%08x", mgr->name,
> +					encoder->possible_crtcs);
> +	}
> +
> +	dump_video_chains();
> +
> +	dev->mode_config.min_width = 256;
> +	dev->mode_config.min_height = 256;
> +
> +	/* note: pvr can't currently handle dst surfaces larger than 2k by
> 2k */
> +	dev->mode_config.max_width = 2048;
> +	dev->mode_config.max_height = 2048;
> +
> +	dev->mode_config.funcs = &omap_mode_config_funcs;
> +
> +	return 0;
> +}
> +
> +static void omap_modeset_free(struct drm_device *dev)
> +{
> +	drm_mode_config_cleanup(dev);
> +}
> +
> +/*
> + * drm ioctl funcs
> + */
> +
> +
> +static int ioctl_get_param(struct drm_device *dev, void *data,
> +		struct drm_file *file_priv)
> +{
> +	struct drm_omap_param *args = data;
> +
> +	DBG("%p: param=%llu", dev, args->param);
> +
> +	switch (args->param) {
> +	case OMAP_PARAM_CHIPSET_ID:
> +		args->value = GET_OMAP_TYPE;
> +		break;
> +	default:
> +		DBG("unknown parameter %lld", args->param);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ioctl_set_param(struct drm_device *dev, void *data,
> +		struct drm_file *file_priv)
> +{
> +	struct drm_omap_param *args = data;
> +
> +	switch (args->param) {
> +	default:
> +		DBG("unknown parameter %lld", args->param);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ioctl_gem_new(struct drm_device *dev, void *data,
> +		struct drm_file *file_priv)
> +{
> +	struct drm_omap_gem_new *args = data;
> +	DBG("%p:%p: size=%d, flags=%08x", dev, file_priv,
> +			args->size.bytes, args->flags);
> +	return omap_gem_new_handle(dev, file_priv, args->size.bytes,
> +			args->flags, &args->handle);
> +}
> +
> +static int ioctl_gem_cpu_prep(struct drm_device *dev, void *data,
> +		struct drm_file *file_priv)
> +{
> +	struct drm_omap_gem_cpu_prep *args = data;
> +	struct drm_gem_object *obj;
> +	int ret;
> +
> +	VERB("%p:%p: handle=%d, op=%x", dev, file_priv, args->handle, args-
> >op);
> +
> +	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
> +	if (!obj) {
> +		return -ENOENT;
> +	}
> +
> +	ret = omap_gem_op_sync(obj, args->op);
> +
> +	if (!ret) {
> +		ret = omap_gem_op_start(obj, args->op);
> +	}
> +
> +	drm_gem_object_unreference_unlocked(obj);
> +
> +	return ret;
> +}
> +
> +static int ioctl_gem_cpu_fini(struct drm_device *dev, void *data,
> +		struct drm_file *file_priv)
> +{
> +	struct drm_omap_gem_cpu_fini *args = data;
> +	struct drm_gem_object *obj;
> +	int ret;
> +
> +	VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
> +
> +	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
> +	if (!obj) {
> +		return -ENOENT;
> +	}
> +
> +	/* XXX flushy, flushy */
> +	ret = 0;
> +
> +	if (!ret) {
> +		ret = omap_gem_op_finish(obj, args->op);
> +	}
> +
> +	drm_gem_object_unreference_unlocked(obj);
> +
> +	return ret;
> +}
> +
> +static int ioctl_gem_info(struct drm_device *dev, void *data,
> +		struct drm_file *file_priv)
> +{
> +	struct drm_omap_gem_info *args = data;
> +	struct drm_gem_object *obj;
> +	int ret = 0;
> +
> +	DBG("%p:%p: handle=%d", dev, file_priv, args->handle);
> +
> +	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
> +	if (!obj) {
> +		return -ENOENT;
> +	}
> +
> +	args->offset = omap_gem_mmap_offset(obj);
> +
> +	drm_gem_object_unreference_unlocked(obj);
> +
> +	return ret;
> +}
> +
> +struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = {
> +	DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param,
> DRM_UNLOCKED|DRM_AUTH),
> +	DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param,
> DRM_UNLOCKED|DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
> +	DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new,
> DRM_UNLOCKED|DRM_AUTH),
> +	DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, ioctl_gem_cpu_prep,
> DRM_UNLOCKED|DRM_AUTH),
> +	DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, ioctl_gem_cpu_fini,
> DRM_UNLOCKED|DRM_AUTH),
> +	DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info,
> DRM_UNLOCKED|DRM_AUTH),
> +};
> +
> +/*
> + * drm driver funcs
> + */
> +
> +/**
> + * load - setup chip and create an initial config
> + * @dev: DRM device
> + * @flags: startup flags
> + *
> + * The driver load routine has to do several things:
> + *   - initialize the memory manager
> + *   - allocate initial config memory
> + *   - setup the DRM framebuffer with the allocated memory
> + */
> +static int dev_load(struct drm_device *dev, unsigned long flags)
> +{
> +	struct omap_drm_private *priv;
> +	int ret;
> +
> +	DBG("load: dev=%p", dev);
> +
> +	drm_device = dev;
> +
> +	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> +	if (!priv) {
> +		dev_err(dev->dev, "could not allocate priv\n");
> +		return -1;
> +	}
> +
> +	dev->dev_private = priv;
> +
> +	ret = omap_modeset_init(dev);
> +	if (ret) {
> +		dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n",
ret);
> +		// hmm
> +		//return ret;

Doesn't it need return? you output error message using dev_err().

> +	}
> +
> +	priv->fbdev = omap_fbdev_init(dev);
> +	if (!priv->fbdev) {
> +		dev_err(dev->dev, "omap_fbdev_init failed\n");
> +		ret = -ENOMEM;
> +		// hmm
> +		//return ret;

Ditto. and also you would have to release some resources. with
omap_modeset_init call, connector, encoder, crtc and so on would be created.

> +	}
> +
> +	drm_kms_helper_poll_init(dev);
> +
> +	ret = drm_vblank_init(dev, priv->num_crtcs);
> +	if (ret) {
> +		dev_err(dev->dev, "could not init vblank\n");
> +	}
> +
> +	loaded = true;
> +
> +	return 0;
> +}
> +
> +static int dev_unload(struct drm_device *dev)
> +{
> +	DBG("unload: dev=%p", dev);
> +
> +	drm_vblank_cleanup(dev);
> +	drm_kms_helper_poll_fini(dev);
> +
> +	omap_fbdev_free(dev);
> +
> +	omap_modeset_free(dev);
> +
> +	kfree(dev->dev_private);
> +	dev->dev_private = NULL;
> +
> +	loaded = false;
> +
> +	return 0;
> +}
> +
> +static int dev_open(struct drm_device *dev, struct drm_file *file)
> +{
> +	file->driver_priv = NULL;
> +
> +	DBG("open: dev=%p, file=%p", dev, file);
> +
> +	return 0;
> +}
> +
> +static int dev_firstopen(struct drm_device *dev)
> +{
> +	DBG("firstopen: dev=%p", dev);
> +	return 0;
> +}
> +
> +/**
> + * lastclose - clean up after all DRM clients have exited
> + * @dev: DRM device
> + *
> + * Take care of cleaning up after all DRM clients have exited.  In the
> + * mode setting case, we want to restore the kernel's initial mode (just
> + * in case the last client left us in a bad state).
> + *
> + * Additionally, in the non-mode setting case, we'll tear down the AGP
> + * and DMA structures, since the kernel won't be using them, and clean
> + * up any GEM state.
> + */
> +static void dev_lastclose(struct drm_device * dev)
> +{
> +	DBG("lastclose: dev=%p", dev);
> +}
> +
> +static void dev_preclose(struct drm_device * dev, struct drm_file *file)
> +{
> +	DBG("preclose: dev=%p", dev);
> +}
> +
> +static void dev_postclose(struct drm_device *dev, struct drm_file *file)
> +{
> +	DBG("postclose: dev=%p, file=%p", dev, file);
> +}
> +
> +/**
> + * enable_vblank - enable vblank interrupt events
> + * @dev: DRM device
> + * @crtc: which irq to enable
> + *
> + * Enable vblank interrupts for @crtc.  If the device doesn't have
> + * a hardware vblank counter, this routine should be a no-op, since
> + * interrupts will have to stay on to keep the count accurate.
> + *
> + * RETURNS
> + * Zero on success, appropriate errno if the given @crtc's vblank
> + * interrupt cannot be enabled.
> + */
> +static int dev_enable_vblank(struct drm_device *dev, int crtc)
> +{
> +	DBG("enable_vblank: dev=%p, crtc=%d", dev, crtc);
> +	return 0;
> +}
> +
> +/**
> + * disable_vblank - disable vblank interrupt events
> + * @dev: DRM device
> + * @crtc: which irq to enable
> + *
> + * Disable vblank interrupts for @crtc.  If the device doesn't have
> + * a hardware vblank counter, this routine should be a no-op, since
> + * interrupts will have to stay on to keep the count accurate.
> + */
> +static void dev_disable_vblank(struct drm_device *dev, int crtc)
> +{
> +	DBG("disable_vblank: dev=%p, crtc=%d", dev, crtc);
> +}
> +
> +static irqreturn_t dev_irq_handler(DRM_IRQ_ARGS)
> +{
> +	return IRQ_HANDLED;
> +}
> +
> +static void dev_irq_preinstall(struct drm_device *dev)
> +{
> +	DBG("irq_preinstall: dev=%p", dev);
> +}
> +
> +static int dev_irq_postinstall(struct drm_device *dev)
> +{
> +	DBG("irq_postinstall: dev=%p", dev);
> +	return 0;
> +}
> +
> +static void dev_irq_uninstall(struct drm_device *dev)
> +{
> +	DBG("irq_uninstall: dev=%p", dev);
> +}
> +
> +static struct vm_operations_struct omap_gem_vm_ops = {
> +	.fault = omap_gem_fault,
> +	.open = drm_gem_vm_open,
> +	.close = drm_gem_vm_close,
> +};
> +
> +static struct drm_driver omap_drm_driver = {
> +		.driver_features = DRIVER_HAVE_IRQ | DRIVER_MODESET |
> DRIVER_GEM,
> +		.load = dev_load,
> +		.unload = dev_unload,
> +		.open = dev_open,
> +		.firstopen = dev_firstopen,
> +		.lastclose = dev_lastclose,
> +		.preclose = dev_preclose,
> +		.postclose = dev_postclose,
> +		.get_vblank_counter = drm_vblank_count,
> +		.enable_vblank = dev_enable_vblank,
> +		.disable_vblank = dev_disable_vblank,
> +		.irq_preinstall = dev_irq_preinstall,
> +		.irq_postinstall = dev_irq_postinstall,
> +		.irq_uninstall = dev_irq_uninstall,
> +		.irq_handler = dev_irq_handler,
> +		.reclaim_buffers = drm_core_reclaim_buffers,
> +		.gem_init_object = omap_gem_init_object,
> +		.gem_free_object = omap_gem_free_object,
> +		.gem_vm_ops = &omap_gem_vm_ops,
> +		.dumb_create = omap_gem_dumb_create,
> +		.dumb_map_offset = omap_gem_dumb_map_offset,
> +		.dumb_destroy = omap_gem_dumb_destroy,
> +		.ioctls = ioctls,
> +		.num_ioctls = DRM_OMAP_NUM_IOCTLS,
> +		.fops = {
> +				.owner = THIS_MODULE,
> +				.open = drm_open,
> +				.unlocked_ioctl = drm_ioctl,
> +				.release = drm_release,
> +				.mmap = omap_gem_mmap,
> +				.poll = drm_poll,
> +				.fasync = drm_fasync,
> +				.read = drm_read,
> +				.llseek = noop_llseek,
> +		},
> +		.name = DRIVER_NAME,
> +		.desc = DRIVER_DESC,
> +		.date = DRIVER_DATE,
> +		.major = DRIVER_MAJOR,
> +		.minor = DRIVER_MINOR,
> +		.patchlevel = DRIVER_PATCHLEVEL,
> +};
> +
> +static int pdev_suspend(struct platform_device *pDevice, pm_message_t
> state)
> +{
> +	DBG("");
> +	return 0;
> +}
> +
> +static int pdev_resume(struct platform_device *device)
> +{
> +	DBG("");
> +	return 0;
> +}
> +
> +static void pdev_shutdown(struct platform_device *device)
> +{
> +	DBG("");
> +}
> +
> +static int pdev_probe(struct platform_device *device)
> +{
> +	DBG("%s", device->name);
> +	return drm_platform_init(&omap_drm_driver, device);
> +}
> +
> +static int pdev_remove(struct platform_device *device)
> +{
> +	DBG("");
> +	drm_platform_exit(&omap_drm_driver, device);
> +	return 0;
> +}
> +
> +struct platform_driver pdev = {
> +		.driver = {
> +			.name = DRIVER_NAME,
> +			.owner = THIS_MODULE,
> +		},
> +		.probe = pdev_probe,
> +		.remove = pdev_remove,
> +		.suspend = pdev_suspend,
> +		.resume = pdev_resume,
> +		.shutdown = pdev_shutdown,
> +};
> +
> +static int __init omap_drm_init(void)
> +{
> +	DBG("init");
> +	return platform_driver_register(&pdev);
> +}
> +
> +static void __exit omap_drm_fini(void)
> +{
> +	DBG("fini");
> +	platform_driver_unregister(&pdev);
> +}
> +
> +/* need late_initcall() so we load after dss_driver's are loaded */
> +late_initcall(omap_drm_init);
> +module_exit(omap_drm_fini);
> +
> +MODULE_AUTHOR("Rob Clark <rob at ti.com>");
> +MODULE_DESCRIPTION("OMAP DRM Display Driver");
> +MODULE_ALIAS("platform:" DRIVER_NAME);
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/omapdrm/omap_drv.h
> b/drivers/staging/omapdrm/omap_drv.h
> new file mode 100644
> index 0000000..acd567d
> --- /dev/null
> +++ b/drivers/staging/omapdrm/omap_drv.h
> @@ -0,0 +1,126 @@
> +/*
> + * linux/drivers/staging/omapdrm/omap_drv.h
> + *
> + * Copyright (C) 2011 Texas Instruments
> + * Author: Rob Clark <rob at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __OMAP_DRV_H__
> +#define __OMAP_DRV_H__
> +
> +#include <video/omapdss.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <drm/drmP.h>
> +#include <drm/omap_drm.h>
> +#include <drm/omap_priv.h>
> +
> +#define DBG(fmt,...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
> +#define VERB(fmt,...) if (0) DRM_DEBUG(fmt, ##__VA_ARGS__) /* verbose
> debug */
> +
> +#define MODULE_NAME     "omapdrm"
> +
> +/* max # of mapper-id's that can be assigned.. todo, come up with a
> better
> + * (but still inexpensive) way to store/access per-buffer mapper private
> + * data..
> + */
> +#define MAX_MAPPERS 2
> +
> +struct omap_drm_private {
> +	int num_crtcs;
> +	struct drm_crtc *crtcs[8];
> +	int num_encoders;
> +	struct drm_encoder *encoders[8];
> +	int num_connectors;
> +	struct drm_connector *connectors[8];
> +
> +	struct drm_fb_helper *fbdev;
> +};
> +
> +struct drm_fb_helper * omap_fbdev_init(struct drm_device *dev);
> +void omap_fbdev_free(struct drm_device *dev);
> +
> +struct drm_crtc * omap_crtc_init(struct drm_device *dev,
> +		struct omap_overlay *ovl, int id);
> +struct omap_overlay * omap_crtc_get_overlay(struct drm_crtc *crtc);
> +
> +struct drm_encoder * omap_encoder_init(struct drm_device *dev,
> +		struct omap_overlay_manager *mgr);
> +struct omap_overlay_manager * omap_encoder_get_manager(
> +		struct drm_encoder *encoder);
> +struct drm_encoder * omap_connector_attached_encoder (
> +		struct drm_connector *connector);
> +enum drm_connector_status omap_connector_detect(
> +		struct drm_connector *connector, bool force);
> +
> +struct drm_connector * omap_connector_init(struct drm_device *dev,
> +		int connector_type, struct omap_dss_device *dssdev);
> +void omap_connector_mode_set(struct drm_connector *connector,
> +		struct drm_display_mode *mode);
> +void omap_connector_flush(struct drm_connector *connector,
> +		int x, int y, int w, int h);
> +void omap_connector_dpms(struct drm_connector *connector, int mode);
> +
> +struct drm_framebuffer * omap_framebuffer_create(struct drm_device *dev,
> +		struct drm_file *file, struct drm_mode_fb_cmd *mode_cmd);
> +struct drm_framebuffer * omap_framebuffer_init(struct drm_device *dev,
> +		struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object
*bo);
> +struct drm_gem_object * omap_framebuffer_bo(struct drm_framebuffer *fb);
> +int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y,
> +		void **vaddr, dma_addr_t *paddr, int *screen_width);
> +struct drm_connector * omap_framebuffer_get_next_connector(
> +		struct drm_framebuffer *fb, struct drm_connector *from);
> +void omap_framebuffer_flush(struct drm_framebuffer *fb,
> +		int x, int y, int w, int h);
> +
> +
> +struct drm_gem_object *omap_gem_new(struct drm_device *dev,
> +						  size_t size, uint32_t
flags);
> +int omap_gem_new_handle(struct drm_device *dev, struct drm_file *file,
> +		size_t size, uint32_t flags, uint32_t *handle);
> +void omap_gem_free_object(struct drm_gem_object *obj);
> +int omap_gem_init_object(struct drm_gem_object *obj);
> +int omap_gem_dumb_map_offset(struct drm_file *file, struct drm_device
> *dev,
> +			 uint32_t handle, uint64_t *offset);
> +int omap_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
> +			uint32_t handle);
> +int omap_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
> +			struct drm_mode_create_dumb *args);
> +int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma);
> +int omap_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
> +int omap_gem_op_start(struct drm_gem_object *obj, enum omap_gem_op op);
> +int omap_gem_op_finish(struct drm_gem_object *obj, enum omap_gem_op op);
> +int omap_gem_op_sync(struct drm_gem_object *obj, enum omap_gem_op op);
> +int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op,
> +		void (*fxn)(void *arg), void *arg);
> +int omap_gem_get_paddr(struct drm_gem_object *obj,
> +		dma_addr_t *paddr, bool remap);
> +int omap_gem_put_paddr(struct drm_gem_object *obj);
> +int omap_gem_get_vaddr(struct drm_gem_object *obj, void **vaddr);
> +int omap_gem_put_vaddr(struct drm_gem_object *obj);
> +uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj);
> +
> +static inline int align_pitch(int pitch, int width, int bpp)
> +{
> +	int bytespp = (bpp + 7) / 8;
> +	/* in case someone tries to feed us a completely bogus stride: */
> +	pitch = max(pitch, width * bytespp);
> +	/* PVR needs alignment to 8 pixels.. right now that is the most
> +	 * restrictive stride requirement..
> +	 */
> +	return ALIGN(pitch, 8 * bytespp);
> +}
> +
> +#endif /* __OMAP_DRV_H__ */
> diff --git a/drivers/staging/omapdrm/omap_encoder.c
> b/drivers/staging/omapdrm/omap_encoder.c
> new file mode 100644
> index 0000000..5f0a01e
> --- /dev/null
> +++ b/drivers/staging/omapdrm/omap_encoder.c
> @@ -0,0 +1,188 @@
> +/*
> + * linux/drivers/staging/omapdrm/omap_encoder.c
> + *
> + * Copyright (C) 2011 Texas Instruments
> + * Author: Rob Clark <rob at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "omap_drv.h"
> +
> +#include "drm_crtc.h"
> +#include "drm_crtc_helper.h"
> +
> +/*
> + * encoder funcs
> + */
> +
> +#define to_omap_encoder(x) container_of(x, struct omap_encoder, base)
> +
> +struct omap_encoder {
> +	struct drm_encoder base;
> +	struct omap_overlay_manager *mgr;
> +};
> +
> +static void omap_encoder_destroy(struct drm_encoder *encoder)
> +{
> +	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
> +	DBG("%s", omap_encoder->mgr->name);
> +	drm_encoder_cleanup(encoder);
> +	kfree(omap_encoder);
> +}
> +
> +static void omap_encoder_dpms(struct drm_encoder *encoder, int mode)
> +{
> +	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
> +	struct drm_device *dev = encoder->dev;
> +	struct omap_drm_private *priv = dev->dev_private;
> +	int i;
> +
> +	DBG("%s: %d", omap_encoder->mgr->name, mode);
> +
> +	/* managers don't need to do anything for DPMS.. but we do
> +	 * need to propagate to the connector, who is actually going
> +	 * to enable/disable as needed:
> +	 */
> +	for (i = 0; i < priv->num_connectors; i++) {
> +		struct drm_connector *connector = priv->connectors[i];
> +		if (connector->encoder == encoder) {
> +			omap_connector_dpms(connector, mode);
> +		}
> +	}
> +}
> +
> +static bool omap_encoder_mode_fixup(struct drm_encoder *encoder,
> +				  struct drm_display_mode *mode,
> +				  struct drm_display_mode *adjusted_mode)
> +{
> +	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
> +	DBG("%s", omap_encoder->mgr->name);
> +	return true;
> +}
> +
> +static void omap_encoder_mode_set(struct drm_encoder *encoder,
> +				struct drm_display_mode *mode,
> +				struct drm_display_mode *adjusted_mode)
> +{
> +	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
> +	struct drm_device *dev = encoder->dev;
> +	struct omap_drm_private *priv = dev->dev_private;
> +	int i;
> +
> +	mode = adjusted_mode;
> +
> +	DBG("%s: set mode: %dx%d", omap_encoder->mgr->name,
> +			mode->hdisplay, mode->vdisplay);
> +
> +	for (i = 0; i < priv->num_connectors; i++) {
> +		struct drm_connector *connector = priv->connectors[i];
> +		if (connector->encoder == encoder) {
> +			omap_connector_mode_set(connector, mode);
> +		}
> +	}
> +}
> +
> +static void omap_encoder_prepare(struct drm_encoder *encoder)
> +{
> +	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
> +	struct drm_encoder_helper_funcs *encoder_funcs =
> +				encoder->helper_private;
> +	DBG("%s", omap_encoder->mgr->name);
> +	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
> +}
> +
> +static void omap_encoder_commit(struct drm_encoder *encoder)
> +{
> +	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
> +	struct drm_encoder_helper_funcs *encoder_funcs =
> +				encoder->helper_private;
> +	DBG("%s", omap_encoder->mgr->name);
> +	omap_encoder->mgr->apply(omap_encoder->mgr);
> +	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
> +}
> +
> +static const struct drm_encoder_funcs omap_encoder_funcs = {
> +	.destroy = omap_encoder_destroy,
> +};
> +
> +static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs =
> {
> +	.dpms = omap_encoder_dpms,
> +	.mode_fixup = omap_encoder_mode_fixup,
> +	.mode_set = omap_encoder_mode_set,
> +	.prepare = omap_encoder_prepare,
> +	.commit = omap_encoder_commit,
> +};
> +
> +struct omap_overlay_manager * omap_encoder_get_manager(
> +		struct drm_encoder *encoder)
> +{
> +	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
> +	return omap_encoder->mgr;
> +}
> +
> +/* initialize encoder */
> +struct drm_encoder * omap_encoder_init(struct drm_device *dev,
> +		struct omap_overlay_manager *mgr)
> +{
> +	struct drm_encoder *encoder = NULL;
> +	struct omap_encoder *omap_encoder;
> +	struct omap_overlay_manager_info info;
> +	int ret;
> +
> +	DBG("%s", mgr->name);
> +
> +	omap_encoder = kzalloc(sizeof(*omap_encoder), GFP_KERNEL);
> +	if (!omap_encoder) {
> +		dev_err(dev->dev, "could not allocate encoder\n");
> +		goto fail;
> +	}
> +
> +	omap_encoder->mgr = mgr;
> +	encoder = &omap_encoder->base;
> +
> +	drm_encoder_init(dev, encoder, &omap_encoder_funcs,
> +			 DRM_MODE_ENCODER_TMDS);
> +	drm_encoder_helper_add(encoder, &omap_encoder_helper_funcs);
> +
> +	mgr->get_manager_info(mgr, &info);
> +
> +	/* TODO: fix hard-coded setup.. */
> +	info.default_color = 0x00000000;
> +	info.trans_key = 0x00000000;
> +	info.trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
> +	info.trans_enabled = false;
> +	info.alpha_enabled = true;
> +
> +	ret = mgr->set_manager_info(mgr, &info);
> +	if (ret) {
> +		dev_err(dev->dev, "could not set manager info\n");
> +		goto fail;
> +	}
> +
> +	ret = mgr->apply(mgr);
> +	if (ret) {
> +		dev_err(dev->dev, "could not apply\n");
> +		goto fail;
> +	}
> +
> +	return encoder;
> +
> +fail:
> +	if (encoder) {
> +		drm_encoder_cleanup(encoder);
> +		kfree(omap_encoder);
> +	}
> +
> +	return NULL;
> +}
> diff --git a/drivers/staging/omapdrm/omap_fb.c
> b/drivers/staging/omapdrm/omap_fb.c
> new file mode 100644
> index 0000000..8532466
> --- /dev/null
> +++ b/drivers/staging/omapdrm/omap_fb.c
> @@ -0,0 +1,259 @@
> +/*
> + * linux/drivers/staging/omapdrm/omap_fb.c
> + *
> + * Copyright (C) 2011 Texas Instruments
> + * Author: Rob Clark <rob at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "omap_drv.h"
> +
> +#include "drm_crtc.h"
> +#include "drm_crtc_helper.h"
> +
> +
> +/*
> + * framebuffer funcs
> + */
> +
> +#define to_omap_framebuffer(x) container_of(x, struct omap_framebuffer,
> base)
> +
> +struct omap_framebuffer {
> +	struct drm_framebuffer base;
> +	struct drm_gem_object *bo;
> +	int size;
> +	void *vaddr;
> +	dma_addr_t paddr;
> +};
> +
> +static int omap_framebuffer_create_handle(struct drm_framebuffer *fb,
> +		struct drm_file *file_priv,
> +		unsigned int *handle)
> +{
> +	struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
> +    return drm_gem_handle_create(file_priv, omap_fb->bo, handle);
> +}
> +
> +static void omap_framebuffer_destroy(struct drm_framebuffer *fb)
> +{
> +	struct drm_device *dev = fb->dev;
> +	struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
> +
> +	DBG("destroy: FB ID: %d (%p)", fb->base.id, fb);
> +
> +	drm_framebuffer_cleanup(fb);
> +
> +	if (omap_fb->vaddr) {
> +		omap_gem_put_vaddr(omap_fb->bo);
> +	}
> +
> +	if (omap_gem_put_paddr(omap_fb->bo)) {
> +		dev_err(dev->dev, "could not unmap!\n");
> +	}
> +
> +	if (omap_fb->bo) {
> +		drm_gem_object_unreference_unlocked(omap_fb->bo);
> +	}
> +
> +	kfree(omap_fb);
> +}
> +
> +static int omap_framebuffer_dirty(struct drm_framebuffer *fb,
> +		struct drm_file *file_priv, unsigned flags, unsigned color,
> +		struct drm_clip_rect *clips, unsigned num_clips)
> +{
> +	int i;
> +
> +	for (i = 0; i < num_clips; i++) {
> +		omap_framebuffer_flush(fb, clips[i].x1, clips[i].y1,
> +					clips[i].x2 - clips[i].x1,
> +					clips[i].y2 - clips[i].y1);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct drm_framebuffer_funcs omap_framebuffer_funcs = {
> +	.create_handle = omap_framebuffer_create_handle,
> +	.destroy = omap_framebuffer_destroy,
> +	.dirty = omap_framebuffer_dirty,
> +};
> +
> +int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y,
> +		void **vaddr, dma_addr_t *paddr, int *screen_width)
> +{
> +	struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
> +	int bpp = fb->bits_per_pixel / 8;
> +	unsigned long offset;
> +
> +	offset = (x * bpp) + (y * fb->pitch);
> +
> +	if (vaddr) {
> +		*vaddr = omap_fb->vaddr + offset;
> +	}
> +
> +	*paddr = omap_fb->paddr + offset;
> +	*screen_width = fb->pitch / bpp;
> +
> +	return omap_fb->size - offset;
> +}
> +
> +struct drm_gem_object * omap_framebuffer_bo(struct drm_framebuffer *fb)
> +{
> +	struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
> +	return omap_fb->bo;
> +}
> +
> +/* iterate thru all the connectors, returning ones that are attached
> + * to the same fb..
> + */
> +struct drm_connector * omap_framebuffer_get_next_connector(
> +		struct drm_framebuffer *fb, struct drm_connector *from)
> +{
> +	struct drm_device *dev = fb->dev;
> +	struct list_head *connector_list = &dev->mode_config.connector_list;
> +	struct drm_connector *connector = from;
> +
> +	if (!from) {
> +		return list_first_entry(connector_list, typeof(*from),
head);
> +	}
> +
> +	list_for_each_entry_from(connector, connector_list, head) {
> +		if (connector != from) {
> +			struct drm_encoder *encoder = connector->encoder;
> +			struct drm_crtc *crtc = encoder ? encoder->crtc :
NULL;
> +			if (crtc && crtc->fb == fb) {
> +				return connector;
> +			}
> +		}
> +	}
> +
> +	return NULL;
> +}
> +
> +/* flush an area of the framebuffer (in case of manual update display
> that
> + * is not automatically flushed)
> + */
> +void omap_framebuffer_flush(struct drm_framebuffer *fb,
> +		int x, int y, int w, int h)
> +{
> +	struct drm_connector *connector = NULL;
> +
> +	VERB("flush: %d,%d %dx%d, fb=%p", x, y, w, h, fb);
> +
> +	while ((connector = omap_framebuffer_get_next_connector(fb,
> connector))) {
> +		/* only consider connectors that are part of a chain */
> +		if (connector->encoder && connector->encoder->crtc) {
> +			/* TODO: maybe this should propagate thru the crtc
who
> +			 * could do the coordinate translation..
> +			 */
> +			struct drm_crtc *crtc = connector->encoder->crtc;
> +			int cx = max(0, x - crtc->x);
> +			int cy = max(0, y - crtc->y);
> +			int cw = w + (x - crtc->x) - cx;
> +			int ch = h + (y - crtc->y) - cy;
> +
> +			omap_connector_flush(connector, cx, cy, cw, ch);
> +		}
> +	}
> +}
> +
> +struct drm_framebuffer * omap_framebuffer_create(struct drm_device *dev,
> +        struct drm_file *file, struct drm_mode_fb_cmd *mode_cmd)
> +{
> +	struct drm_gem_object *bo;
> +	struct drm_framebuffer *fb;
> +	bo = drm_gem_object_lookup(dev, file, mode_cmd->handle);
> +	if (!bo) {
> +		return ERR_PTR(-ENOENT);
> +	}
> +	fb = omap_framebuffer_init(dev, mode_cmd, bo);
> +	if (!fb) {
> +		return ERR_PTR(-ENOMEM);
> +	}
> +	return fb;
> +}
> +
> +struct drm_framebuffer * omap_framebuffer_init(struct drm_device *dev,
> +		struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object *bo)
> +{
> +	struct omap_framebuffer *omap_fb;
> +	struct drm_framebuffer *fb = NULL;
> +	int size, ret;
> +
> +	DBG("create framebuffer: dev=%p, mode_cmd=%p (%dx%d@%d)", dev,
> +			mode_cmd, mode_cmd->width, mode_cmd->height,
mode_cmd-
> >bpp);
> +
> +	/* in case someone tries to feed us a completely bogus stride: */
> +	mode_cmd->pitch = align_pitch(mode_cmd->pitch,
> +			mode_cmd->width, mode_cmd->bpp);
> +
> +	omap_fb = kzalloc(sizeof(*omap_fb), GFP_KERNEL);
> +	if (!omap_fb) {
> +		dev_err(dev->dev, "could not allocate fb\n");
> +		goto fail;
> +	}
> +
> +	fb = &omap_fb->base;
> +	ret = drm_framebuffer_init(dev, fb, &omap_framebuffer_funcs);
> +	if (ret) {
> +		dev_err(dev->dev, "framebuffer init failed: %d\n", ret);
> +		goto fail;
> +	}
> +
> +	DBG("create: FB ID: %d (%p)", fb->base.id, fb);
> +
> +	size = PAGE_ALIGN(mode_cmd->pitch * mode_cmd->height);
> +
> +	if (bo) {
> +		DBG("using existing %d byte buffer (needed %d)", bo->size,
> size);
> +		if (size > bo->size) {
> +			dev_err(dev->dev, "provided buffer object is too
> small!\n");
> +			goto fail;
> +		}
> +	} else {
> +		/* for convenience of all the various callers who don't want
> +		 * to be bothered to allocate their own buffer..
> +		 */
> +		DBG("allocating %d bytes for fb %d", size, dev->primary-
> >index);
> +		bo = omap_gem_new(dev, size, OMAP_BO_SCANOUT | OMAP_BO_WC);
> +		if (!bo) {
> +			dev_err(dev->dev, "failed to allocate buffer
> object\n");
> +			goto fail;
> +		}
> +	}
> +
> +	omap_fb->bo = bo;
> +	omap_fb->size = size;
> +
> +	if (omap_gem_get_paddr(bo, &omap_fb->paddr, true)) {
> +		dev_err(dev->dev, "could not map (paddr)!\n");
> +		goto fail;
> +	}
> +
> +	if (omap_gem_get_vaddr(bo, &omap_fb->vaddr)) {
> +		dev_err(dev->dev, "could not map (vaddr)!\n");
> +		goto fail;
> +	}
> +
> +	drm_helper_mode_fill_fb_struct(fb, mode_cmd);
> +
> +	return fb;
> +
> +fail:
> +	if (fb) {
> +		omap_framebuffer_destroy(fb);
> +	}
> +	return NULL;
> +}
> diff --git a/drivers/staging/omapdrm/omap_fbdev.c
> b/drivers/staging/omapdrm/omap_fbdev.c
> new file mode 100644
> index 0000000..24ab4d9
> --- /dev/null
> +++ b/drivers/staging/omapdrm/omap_fbdev.c
> @@ -0,0 +1,309 @@
> +/*
> + * linux/drivers/staging/omapdrm/omap_fbdev.c
> + *
> + * Copyright (C) 2011 Texas Instruments
> + * Author: Rob Clark <rob at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "omap_drv.h"
> +
> +#include "drm_crtc.h"
> +#include "drm_fb_helper.h"
> +
> +/*
> + * fbdev funcs, to implement legacy fbdev interface on top of drm driver
> + */
> +
> +#define to_omap_fbdev(x) container_of(x, struct omap_fbdev, base)
> +
> +struct omap_fbdev {
> +	struct drm_fb_helper base;
> +	struct drm_framebuffer *fb;
> +};
> +
> +static void omap_fbdev_flush(struct fb_info *fbi, int x, int y, int w,
> int h);
> +
> +static ssize_t omap_fbdev_write(struct fb_info *fbi, const char __user
> *buf,
> +		size_t count, loff_t *ppos)
> +{
> +	ssize_t res;
> +
> +	res = fb_sys_write(fbi, buf, count, ppos);
> +	omap_fbdev_flush(fbi, 0, 0, fbi->var.xres, fbi->var.yres);
> +
> +	return res;
> +}
> +
> +static void omap_fbdev_fillrect(struct fb_info *fbi,
> +		const struct fb_fillrect *rect)
> +{
> +	sys_fillrect(fbi, rect);
> +	omap_fbdev_flush(fbi, rect->dx, rect->dy, rect->width, rect-
> >height);
> +}
> +
> +static void omap_fbdev_copyarea(struct fb_info *fbi,
> +		const struct fb_copyarea *area)
> +{
> +	sys_copyarea(fbi, area);
> +	omap_fbdev_flush(fbi, area->dx, area->dy, area->width, area-
> >height);
> +}
> +
> +static void omap_fbdev_imageblit(struct fb_info *fbi,
> +		const struct fb_image *image)
> +{
> +	sys_imageblit(fbi, image);
> +	omap_fbdev_flush(fbi, image->dx, image->dy,
> +				image->width, image->height);
> +}
> +
> +static struct fb_ops omap_fb_ops = {
> +	.owner = THIS_MODULE,
> +
> +	/* Note: to properly handle manual update displays, we wrap the
> +	 * basic fbdev ops which write to the framebuffer
> +	 */
> +	.fb_read = fb_sys_read,
> +	.fb_write = omap_fbdev_write,
> +	.fb_fillrect = omap_fbdev_fillrect,
> +	.fb_copyarea = omap_fbdev_copyarea,
> +	.fb_imageblit = omap_fbdev_imageblit,
> +
> +	.fb_check_var = drm_fb_helper_check_var,
> +	.fb_set_par = drm_fb_helper_set_par,
> +	.fb_pan_display = drm_fb_helper_pan_display,
> +	.fb_blank = drm_fb_helper_blank,
> +	.fb_setcmap = drm_fb_helper_setcmap,
> +
> +	.fb_debug_enter = drm_fb_helper_debug_enter,
> +	.fb_debug_leave = drm_fb_helper_debug_leave,
> +};
> +
> +static int omap_fbdev_create(struct drm_fb_helper *helper,
> +		struct drm_fb_helper_surface_size *sizes)
> +{
> +	struct omap_fbdev *fbdev = to_omap_fbdev(helper);
> +	struct drm_device *dev = helper->dev;
> +	struct drm_framebuffer *fb = NULL;
> +	struct fb_info *fbi = NULL;
> +	struct drm_mode_fb_cmd mode_cmd = {0};
> +	dma_addr_t paddr;
> +	void __iomem *vaddr;
> +	int size, screen_width;
> +	int ret;
> +
> +	/* only doing ARGB32 since this is what is needed to alpha-blend
> +	 * with video overlays:
> +	 */
> +	sizes->surface_bpp = 32;
> +	sizes->surface_depth = 32;
> +
> +	DBG("create fbdev: %dx%d@%d", sizes->surface_width,
> +			sizes->surface_height, sizes->surface_bpp);
> +
> +	mode_cmd.width = sizes->surface_width;
> +	mode_cmd.height = sizes->surface_height;
> +
> +	mode_cmd.bpp = sizes->surface_bpp;
> +	mode_cmd.depth = sizes->surface_depth;
> +
> +	fb = omap_framebuffer_init(dev, &mode_cmd, NULL);
> +	if (!fb) {
> +		dev_err(dev->dev, "failed to allocate fb\n");
> +		ret = -ENOMEM;
> +		goto fail;
> +	}
> +
> +	mutex_lock(&dev->struct_mutex);
> +
> +	fbi = framebuffer_alloc(0, dev->dev);
> +	if (!fbi) {
> +		dev_err(dev->dev, "failed to allocate fb info\n");
> +		ret = -ENOMEM;
> +		goto fail_unlock;
> +	}
> +
> +	DBG("fbi=%p, dev=%p", fbi, dev);
> +
> +	fbdev->fb = fb;
> +	helper->fb = fb;
> +	helper->fbdev = fbi;
> +
> +	fbi->par = helper;
> +	fbi->flags = FBINFO_DEFAULT;
> +	fbi->fbops = &omap_fb_ops;
> +
> +	strcpy(fbi->fix.id, MODULE_NAME);
> +
> +	ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
> +	if (ret) {
> +		ret = -ENOMEM;
> +		goto fail_unlock;
> +	}
> +
> +	drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth);
> +	drm_fb_helper_fill_var(fbi, helper, fb->width, fb->height);
> +
> +	size = omap_framebuffer_get_buffer(fb, 0, 0,
> +			&vaddr, &paddr, &screen_width);
> +
> +	dev->mode_config.fb_base = paddr;
> +
> +	fbi->screen_base = vaddr;
> +	fbi->screen_size = size;
> +	fbi->fix.smem_start = paddr;
> +	fbi->fix.smem_len = size;
> +
> +	DBG("par=%p, %dx%d", fbi->par, fbi->var.xres, fbi->var.yres);
> +	DBG("allocated %dx%d fb", fbdev->fb->width, fbdev->fb->height);
> +
> +	mutex_unlock(&dev->struct_mutex);
> +
> +	return 0;
> +
> +fail_unlock:
> +	mutex_unlock(&dev->struct_mutex);
> +fail:
> +
> +	if (ret) {
> +		if (fbi)
> +			framebuffer_release(fbi);
> +		if (fb)
> +			fb->funcs->destroy(fb);
> +	}
> +
> +	return ret;
> +}
> +
> +static void omap_crtc_fb_gamma_set(struct drm_crtc *crtc,
> +		u16 red, u16 green, u16 blue, int regno)
> +{
> +	DBG("fbdev: set gamma");
> +}
> +
> +static void omap_crtc_fb_gamma_get(struct drm_crtc *crtc,
> +		u16 *red, u16 *green, u16 *blue, int regno)
> +{
> +	DBG("fbdev: get gamma");
> +}
> +
> +static int omap_fbdev_probe(struct drm_fb_helper *helper,
> +		struct drm_fb_helper_surface_size *sizes)
> +{
> +	int new_fb = 0;
> +	int ret;
> +
> +	if (!helper->fb) {
> +		ret = omap_fbdev_create(helper, sizes);
> +		if (ret)
> +			return ret;
> +		new_fb = 1;
> +	}
> +	return new_fb;
> +}
> +
> +static struct drm_fb_helper_funcs omap_fb_helper_funcs = {
> +	.gamma_set = omap_crtc_fb_gamma_set,
> +	.gamma_get = omap_crtc_fb_gamma_get,
> +	.fb_probe = omap_fbdev_probe,
> +};
> +
> +static struct drm_fb_helper * get_fb(struct fb_info *fbi)
> +{
> +	if (!fbi || strcmp(fbi->fix.id, MODULE_NAME)) {
> +		/* these are not the fb's you're looking for */
> +		return NULL;
> +	}
> +	return fbi->par;
> +}
> +
> +/* flush an area of the framebuffer (in case of manual update display
> that
> + * is not automatically flushed)
> + */
> +static void omap_fbdev_flush(struct fb_info *fbi, int x, int y, int w,
> int h)
> +{
> +	struct drm_fb_helper *helper = get_fb(fbi);
> +
> +	if (!helper)
> +		return;
> +
> +	VERB("flush fbdev: %d,%d %dx%d, fbi=%p", x, y, w, h, fbi);
> +
> +	omap_framebuffer_flush(helper->fb, x, y, w, h);
> +}
> +
> +/* initialize fbdev helper */
> +struct drm_fb_helper * omap_fbdev_init(struct drm_device *dev)
> +{
> +	struct omap_drm_private *priv = dev->dev_private;
> +	struct omap_fbdev *fbdev = NULL;
> +	struct drm_fb_helper *helper;
> +	int ret = 0;
> +
> +	fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
> +	if (!fbdev) {
> +		dev_err(dev->dev, "could not allocate fbdev\n");
> +		goto fail;
> +	}
> +
> +	helper = &fbdev->base;
> +
> +	helper->funcs = &omap_fb_helper_funcs;
> +
> +	ret = drm_fb_helper_init(dev, helper,
> +			priv->num_crtcs, priv->num_connectors);
> +	if (ret) {
> +		dev_err(dev->dev, "could not init fbdev: ret=%d\n", ret);
> +		goto fail;
> +	}
> +
> +	drm_fb_helper_single_add_all_connectors(helper);
> +	drm_fb_helper_initial_config(helper, 32);
> +
> +	priv->fbdev = helper;
> +
> +	return helper;
> +
> +fail:
> +	if (fbdev) {
> +		kfree(fbdev);
> +	}
> +	return NULL;
> +}
> +
> +void omap_fbdev_free(struct drm_device *dev)
> +{
> +	struct omap_drm_private *priv = dev->dev_private;
> +	struct drm_fb_helper *helper = priv->fbdev;
> +	struct omap_fbdev *fbdev;
> +	struct fb_info *fbi;
> +
> +	DBG();
> +
> +	fbi = helper->fbdev;
> +
> +	unregister_framebuffer(fbi);
> +	framebuffer_release(fbi);
> +
> +	drm_fb_helper_fini(helper);
> +
> +	fbdev = to_omap_fbdev(priv->fbdev);
> +
> +	kfree(fbdev);
> +
> +	priv->fbdev = NULL;
> +}
> +
> diff --git a/drivers/staging/omapdrm/omap_gem.c
> b/drivers/staging/omapdrm/omap_gem.c
> new file mode 100644
> index 0000000..890df83
> --- /dev/null
> +++ b/drivers/staging/omapdrm/omap_gem.c
> @@ -0,0 +1,720 @@
> +/*
> + * linux/drivers/staging/omapdrm/omap_gem.c
> + *
> + * Copyright (C) 2011 Texas Instruments
> + * Author: Rob Clark <rob.clark at linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +
> +#include <linux/spinlock.h>
> +#include <linux/shmem_fs.h>
> +
> +#include "omap_drv.h"
> +
> +/*
> + * GEM buffer object implementation.
> + */
> +
> +#define to_omap_bo(x) container_of(x, struct omap_gem_object, base)
> +
> +/* note: we use upper 8 bits of flags for driver-internal flags: */
> +#define OMAP_BO_DMA			0x01000000	/* actually is
> physically contiguous */
> +#define OMAP_BO_EXT_SYNC	0x02000000	/* externally allocated sync
> object */
> +#define OMAP_BO_EXT_MEM		0x04000000	/* externally
allocated
> memory */
> +
> +
> +struct omap_gem_object {
> +	struct drm_gem_object base;
> +
> +	uint32_t flags;
> +
> +	/**
> +	 * If buffer is physically contiguous or remapped in TILER, the
> +	 * OMAP_BO_DMA flag is set and the paddr is valid.
> +	 *
> +	 * Note that OMAP_BO_SCANOUT is a hint from userspace that DMA
> capable
> +	 * buffer is requested, but doesn't mean that it is.  Use the
> +	 * OMAP_BO_DMA flag to determine if the buffer has a DMA capable
> +	 * physical address.
> +	 */
> +	dma_addr_t paddr;
> +
> +	/**
> +	 * Array of backing pages, if allocated.  Note that pages are never
> +	 * allocated for buffers originally allocated from contiguous
> memory
> +	 */
> +	struct page **pages;
> +
> +	/**
> +	 * Virtual address, if mapped.
> +	 */
> +	void *vaddr;
> +
> +	/**
> +	 * sync-object allocated on demand (if needed)
> +	 *
> +	 * Per-buffer sync-object for tracking pending and completed hw/dma
> +	 * read and write operations.  The layout in memory is dictated by
> +	 * the SGX firmware, which uses this information to stall the
> command
> +	 * stream if a surface is not ready yet.
> +	 *
> +	 * Note that when buffer is used by SGX, the sync-object needs to
> be
> +	 * allocated from a special heap of sync-objects.  This way many
> sync
> +	 * objects can be packed in a page, and not waste GPU virtual
> address
> +	 * space.  Because of this we have to have a
> omap_gem_set_sync_object()
> +	 * API to allow replacement of the syncobj after it has
> (potentially)
> +	 * already been allocated.  A bit ugly but I haven't thought of a
> +	 * better alternative.
> +	 */
> +	struct {
> +		uint32_t write_pending;
> +		uint32_t write_complete;
> +		uint32_t read_pending;
> +		uint32_t read_complete;
> +	} *sync;
> +};
> +
> +
> +/* GEM objects can either be allocated from contiguous memory (in which
> + * case obj->filp==NULL), or w/ shmem backing (obj->filp!=NULL).  But non
> + * contiguous buffers can be remapped in TILER/DMM if they need to be
> + * contiguous... but we don't do this all the time to reduce pressure
> + * on TILER/DMM space when we know at allocation time that the buffer
> + * will need to be scanned out.
> + */
> +static inline bool is_shmem(struct drm_gem_object *obj)
> +{
> +	return obj->filp != NULL;
> +}
> +
> +
> +DEFINE_SPINLOCK(sync_lock);
> +
> +/** ensure backing pages are allocated */
> +static int omap_gem_attach_pages(struct drm_gem_object *obj)
> +{
> +	struct omap_gem_object *omap_obj = to_omap_bo(obj);
> +	struct page **pages;
> +
> +	WARN_ON(omap_obj->pages);
> +
> +	/* TODO: __GFP_DMA32 .. but somehow GFP_HIGHMEM is coming from the
> +	 * mapping_gfp_mask(mapping) which conflicts w/ GFP_DMA32..
> probably
> +	 * we actually want CMA memory for it all anyways..
> +	 */
> +	pages = drm_gem_get_pages(obj, GFP_KERNEL);
> +	if (IS_ERR(pages)) {
> +		dev_err(obj->dev->dev, "could not get pages: %ld\n",
> PTR_ERR(pages));
> +		return PTR_ERR(pages);
> +	}
> +
> +	omap_obj->pages = pages;
> +	return 0;
> +}
> +
> +/** release backing pages */
> +static void omap_gem_detach_pages(struct drm_gem_object *obj)
> +{
> +	struct omap_gem_object *omap_obj = to_omap_bo(obj);
> +	drm_gem_put_pages(obj, omap_obj->pages, true, false);
> +	omap_obj->pages = NULL;
> +}
> +
> +/** get mmap offset */
> +uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj)
> +{
> +	if (!obj->map_list.map) {
> +		/* Make it mmapable */
> +		int ret = drm_gem_create_mmap_offset(obj);
> +		if (ret) {
> +			dev_err(obj->dev->dev, "could not allocate mmap
> offset");
> +			return 0;
> +		}
> +	}
> +
> +	return (uint64_t)obj->map_list.hash.key << PAGE_SHIFT;
> +}
> +
> +/**
> + * omap_gem_fault		-	pagefault handler for GEM objects
> + * @vma: the VMA of the GEM object
> + * @vmf: fault detail
> + *
> + * Invoked when a fault occurs on an mmap of a GEM managed area. GEM
> + * does most of the work for us including the actual map/unmap calls
> + * but we need to do the actual page work.
> + *
> + * The VMA was set up by GEM. In doing so it also ensured that the
> + * vma->vm_private_data points to the GEM object that is backing this
> + * mapping.
> + */
> +int omap_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
> +{
> +	struct drm_gem_object *obj = vma->vm_private_data;
> +	struct omap_gem_object *omap_obj = to_omap_bo(obj);
> +	struct drm_device *dev = obj->dev;
> +	unsigned long pfn;
> +	pgoff_t page_offset;
> +	int ret;
> +
> +	/* We don't use vmf->pgoff since that has the fake offset */
> +	page_offset = ((unsigned long)vmf->virtual_address -
> +			vma->vm_start) >> PAGE_SHIFT;
> +
> +	/* Make sure we don't parallel update on a fault, nor move or
> remove
> +	 * something from beneath our feet
> +	 */
> +	mutex_lock(&dev->struct_mutex);
> +
> +	/* if a shmem backed object, make sure we have pages attached now
> */
> +	if (is_shmem(obj) && !omap_obj->pages) {
> +		ret = omap_gem_attach_pages(obj);
> +		if (ret) {
> +			dev_err(dev->dev, "could not attach pages\n");
> +			goto fail;
> +		}
> +	}
> +
> +	if (omap_obj->pages) {
> +		pfn = page_to_pfn(omap_obj->pages[page_offset]);
> +	} else {
> +		BUG_ON(!(omap_obj->flags & OMAP_BO_DMA));
> +		pfn = (omap_obj->paddr >> PAGE_SHIFT) + page_offset;
> +	}
> +
> +	VERB("Inserting %p pfn %lx, pa %lx", vmf->virtual_address,
> +			pfn, pfn << PAGE_SHIFT);
> +
> +	ret = vm_insert_mixed(vma, (unsigned long)vmf->virtual_address,
> pfn);
> +
> +fail:
> +	mutex_unlock(&dev->struct_mutex);
> +	switch (ret) {
> +	case 0:
> +	case -ERESTARTSYS:
> +	case -EINTR:
> +		return VM_FAULT_NOPAGE;
> +	case -ENOMEM:
> +		return VM_FAULT_OOM;
> +	default:
> +		return VM_FAULT_SIGBUS;
> +	}
> +}
> +
> +/** We override mainly to fix up some of the vm mapping flags.. */
> +int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma)
> +{
> +	struct omap_gem_object *omap_obj;
> +	int ret;
> +
> +	ret = drm_gem_mmap(filp, vma);
> +	if (ret) {
> +		DBG("mmap failed: %d", ret);
> +		return ret;
> +	}
> +
> +	/* after drm_gem_mmap(), it is safe to access the obj */
> +	omap_obj = to_omap_bo(vma->vm_private_data);
> +
> +	vma->vm_flags &= ~VM_PFNMAP;
> +	vma->vm_flags |= VM_MIXEDMAP;
> +
> +	if (omap_obj->flags & OMAP_BO_WC) {
> +		vma->vm_page_prot =
> pgprot_writecombine(vm_get_page_prot(vma->vm_flags));
> +	} else if (omap_obj->flags & OMAP_BO_UNCACHED) {
> +		vma->vm_page_prot = pgprot_noncached(vm_get_page_prot(vma-
> >vm_flags));
> +	} else {
> +		vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
> +	}
> +
> +	return ret;
> +}
> +
> +/**
> + * omap_gem_dumb_create	-	create a dumb buffer
> + * @drm_file: our client file
> + * @dev: our device
> + * @args: the requested arguments copied from userspace
> + *
> + * Allocate a buffer suitable for use for a frame buffer of the
> + * form described by user space. Give userspace a handle by which
> + * to reference it.
> + */
> +int omap_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
> +		struct drm_mode_create_dumb *args)
> +{
> +	/* in case someone tries to feed us a completely bogus stride: */
> +	args->pitch = align_pitch(args->pitch, args->width, args->bpp);
> +	args->size = PAGE_ALIGN(args->pitch * args->height);
> +
> +	return omap_gem_new_handle(dev, file, args->size,
> +			OMAP_BO_SCANOUT | OMAP_BO_WC, &args->handle);
> +}
> +
> +/**
> + * omap_gem_dumb_destroy	-	destroy a dumb buffer
> + * @file: client file
> + * @dev: our DRM device
> + * @handle: the object handle
> + *
> + * Destroy a handle that was created via omap_gem_dumb_create.
> + */
> +int omap_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
> +		uint32_t handle)
> +{
> +	/* No special work needed, drop the reference and see what falls
> out */
> +	return drm_gem_handle_delete(file, handle);
> +}
> +
> +/**
> + * omap_gem_dumb_map	-	buffer mapping for dumb interface
> + * @file: our drm client file
> + * @dev: drm device
> + * @handle: GEM handle to the object (from dumb_create)
> + *
> + * Do the necessary setup to allow the mapping of the frame buffer
> + * into user memory. We don't have to do much here at the moment.
> + */
> +int omap_gem_dumb_map_offset(struct drm_file *file, struct drm_device
> *dev,
> +		uint32_t handle, uint64_t *offset)
> +{
> +	int ret = 0;
> +	struct drm_gem_object *obj;
> +
> +	mutex_lock(&dev->struct_mutex);
> +
> +	/* GEM does all our handle to object mapping */
> +	obj = drm_gem_object_lookup(dev, file, handle);
> +	if (obj == NULL) {
> +		ret = -ENOENT;
> +		goto fail;
> +	}
> +
> +	/* GEM should really work out the hash offsets for us */
> +	*offset = omap_gem_mmap_offset(obj);
> +
> +	drm_gem_object_unreference_unlocked(obj);
> +
> +fail:
> +	mutex_unlock(&dev->struct_mutex);
> +	return ret;
> +}
> +
> +/* Get physical address for DMA.. if 'remap' is true, and the buffer is
> not
> + * already contiguous, remap it to pin in physically contiguous memory..
> (ie.
> + * map in TILER)
> + */
> +int omap_gem_get_paddr(struct drm_gem_object *obj,
> +		dma_addr_t *paddr, bool remap)
> +{
> +	struct omap_gem_object *omap_obj = to_omap_bo(obj);
> +
> +	if (!(omap_obj->flags & OMAP_BO_DMA)) {
> +		/* TODO: remap to TILER */
> +		return -ENOMEM;
> +	}
> +
> +	*paddr = omap_obj->paddr;
> +
> +	return 0;
> +}
> +
> +/* Release physical address, when DMA is no longer being performed.. this
> + * could potentially unpin and unmap buffers from TILER
> + */
> +int omap_gem_put_paddr(struct drm_gem_object *obj)
> +{
> +	/* do something here when remap to TILER is used.. */
> +	return 0;
> +}
> +
> +/* Get kernel virtual address for CPU access */
> +int omap_gem_get_vaddr(struct drm_gem_object *obj, void **vaddr)
> +{
> +	struct omap_gem_object *omap_obj = to_omap_bo(obj);
> +
> +	if (!omap_obj->vaddr) {
> +		/* TODO */
> +		return -ENOMEM;
> +	}
> +
> +	*vaddr = omap_obj->vaddr;
> +	return 0;
> +}
> +
> +/* Release kernel virtual address */
> +int omap_gem_put_vaddr(struct drm_gem_object *obj)
> +{
> +	/* do something when remap to kernel virtual space is used.. */
> +	return 0;
> +}
> +
> +/* Buffer Synchronization:
> + */
> +
> +struct omap_gem_sync_waiter {
> +	struct list_head list;
> +	struct omap_gem_object *omap_obj;
> +	enum omap_gem_op op;
> +	uint32_t read_target, write_target;
> +	/* notify called w/ sync_lock held */
> +	void (*notify)(void *arg);
> +	void *arg;
> +};
> +
> +/* list of omap_gem_sync_waiter.. the notify fxn gets called back when
> + * the read and/or write target count is achieved which can call a user
> + * callback (ex. to kick 3d and/or 2d), wakeup blocked task (prep for
> + * cpu access), etc.
> + */
> +static LIST_HEAD(waiters);
> +
> +static inline bool is_waiting(struct omap_gem_sync_waiter *waiter)
> +{
> +	struct omap_gem_object *omap_obj = waiter->omap_obj;
> +	if ((waiter->op & OMAP_GEM_READ) &&
> +			(omap_obj->sync->read_complete <
waiter->read_target))
> +		return true;
> +	if ((waiter->op & OMAP_GEM_WRITE) &&
> +			(omap_obj->sync->write_complete < waiter-
> >write_target))
> +		return true;
> +	return false;
> +}
> +
> +/* macro for sync debug.. */
> +#define SYNCDBG 0
> +#define SYNC(fmt,...) do { if(SYNCDBG) \
> +		printk(KERN_ERR "%s:%d: "fmt"\n", __func__, __LINE__,
> ##__VA_ARGS__); \
> +	} while (0)
> +
> +
> +static void sync_op_update(void)
> +{
> +	struct omap_gem_sync_waiter *waiter, *n;
> +	list_for_each_entry_safe(waiter, n, &waiters, list) {
> +		if (!is_waiting(waiter)) {
> +			list_del(&waiter->list);
> +			SYNC("notify: %p", waiter);
> +			waiter->notify(waiter->arg);
> +			kfree(waiter);
> +		}
> +	}
> +}
> +
> +static inline int sync_op(struct drm_gem_object *obj,
> +		enum omap_gem_op op, bool start)
> +{
> +	struct omap_gem_object *omap_obj = to_omap_bo(obj);
> +	int ret = 0;
> +
> +	spin_lock(&sync_lock);
> +
> +	if (!omap_obj->sync) {
> +		omap_obj->sync = kzalloc(sizeof(*omap_obj->sync),
> GFP_ATOMIC);
> +		if (!omap_obj->sync) {
> +			ret = -ENOMEM;
> +			goto unlock;
> +		}
> +	}
> +
> +	if (start) {
> +		if (op & OMAP_GEM_READ)  omap_obj->sync->read_pending++;
> +		if (op & OMAP_GEM_WRITE) omap_obj->sync->write_pending++;
> +	} else {
> +		if (op & OMAP_GEM_READ)  omap_obj->sync->read_complete++;
> +		if (op & OMAP_GEM_WRITE) omap_obj->sync->write_complete++;
> +		sync_op_update();
> +	}
> +
> +unlock:
> +	spin_unlock(&sync_lock);
> +
> +	return ret;
> +}
> +
> +/* it is a bit lame to handle updates in this sort of polling way, but
> + * in case of PVR, the GPU can directly update read/write complete
> + * values, and not really tell us which ones it updated.. this also
> + * means that sync_lock is not quite sufficient.  So we'll need to
> + * do something a bit better when it comes time to add support for
> + * separate 2d hw..
> + */
> +void omap_gem_op_update(void)
> +{
> +	spin_lock(&sync_lock);
> +	sync_op_update();
> +	spin_unlock(&sync_lock);
> +}
> +
> +/* mark the start of read and/or write operation */
> +int omap_gem_op_start(struct drm_gem_object *obj, enum omap_gem_op op)
> +{
> +	return sync_op(obj, op, true);
> +}
> +
> +int omap_gem_op_finish(struct drm_gem_object *obj, enum omap_gem_op op)
> +{
> +	return sync_op(obj, op, false);
> +}
> +
> +static DECLARE_WAIT_QUEUE_HEAD(sync_event);
> +
> +static void sync_notify(void *arg)
> +{
> +	struct task_struct **waiter_task = arg;
> +	*waiter_task = NULL;
> +	wake_up_all(&sync_event);
> +}
> +
> +int omap_gem_op_sync(struct drm_gem_object *obj, enum omap_gem_op op)
> +{
> +	struct omap_gem_object *omap_obj = to_omap_bo(obj);
> +	int ret = 0;
> +	if (omap_obj->sync)
> +	{
> +		volatile struct task_struct *waiter_task = current;
> +		struct omap_gem_sync_waiter *waiter =
> +				kzalloc(sizeof(*waiter), GFP_KERNEL);
> +
> +		if (!waiter) {
> +			return -ENOMEM;
> +		}
> +
> +		waiter->omap_obj = omap_obj;
> +		waiter->op = op;
> +		waiter->read_target = omap_obj->sync->read_pending;
> +		waiter->write_target = omap_obj->sync->write_pending;
> +		waiter->notify = sync_notify;
> +		waiter->arg = &waiter_task;
> +
> +		spin_lock(&sync_lock);
> +		if (is_waiting(waiter)) {
> +			SYNC("waited: %p", waiter);
> +			list_add_tail(&waiter->list, &waiters);
> +			spin_unlock(&sync_lock);
> +			ret = wait_event_interruptible(sync_event,
> +					(waiter_task == NULL));
> +			spin_lock(&sync_lock);
> +			if (waiter_task) {
> +				SYNC("interrupted: %p", waiter);
> +				/* we were interrupted */
> +				list_del(&waiter->list);
> +				waiter_task = NULL;
> +			} else {
> +				/* freed in sync_op_update() */
> +				waiter = NULL;
> +			}
> +		}
> +		spin_unlock(&sync_lock);
> +
> +		if (waiter) {
> +			kfree(waiter);
> +		}
> +	}
> +	return ret;
> +}
> +
> +/* call fxn(arg), either synchronously or asynchronously if the op
> + * is currently blocked..  fxn() can be called from any context
> + *
> + * (TODO for now fxn is called back from whichever context calls
> + * omap_gem_op_update().. but this could be better defined later
> + * if needed)
> + *
> + * TODO more code in common w/ _sync()..
> + */
> +int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op,
> +		void (*fxn)(void *arg), void *arg)
> +{
> +	struct omap_gem_object *omap_obj = to_omap_bo(obj);
> +	if (omap_obj->sync) {
> +		struct omap_gem_sync_waiter *waiter =
> +				kzalloc(sizeof(*waiter), GFP_ATOMIC);
> +
> +		if (!waiter) {
> +			return -ENOMEM;
> +		}
> +
> +		waiter->omap_obj = omap_obj;
> +		waiter->op = op;
> +		waiter->read_target = omap_obj->sync->read_pending;
> +		waiter->write_target = omap_obj->sync->write_pending;
> +		waiter->notify = fxn;
> +		waiter->arg = arg;
> +
> +		spin_lock(&sync_lock);
> +		if (is_waiting(waiter)) {
> +			SYNC("waited: %p", waiter);
> +			list_add_tail(&waiter->list, &waiters);
> +			spin_unlock(&sync_lock);
> +			return 0;
> +		}
> +
> +		spin_unlock(&sync_lock);
> +	}
> +
> +	/* no waiting.. */
> +	fxn(arg);
> +
> +	return 0;
> +}
> +
> +/* special API so PVR can update the buffer to use a sync-object
> allocated
> + * from it's sync-obj heap.  Only used for a newly allocated (from PVR's
> + * perspective) sync-object, so we overwrite the new syncobj w/ values
> + * from the already allocated syncobj (if there is one)
> + */
> +int omap_gem_set_sync_object(struct drm_gem_object *obj, void *syncobj)
> +{
> +	struct omap_gem_object *omap_obj = to_omap_bo(obj);
> +	int ret = 0;
> +
> +	spin_lock(&sync_lock);
> +
> +	if ((omap_obj->flags & OMAP_BO_EXT_SYNC) && !syncobj) {
> +		/* clearing a previously set syncobj */
> +		syncobj = kzalloc(sizeof(*omap_obj->sync), GFP_ATOMIC);
> +		if (!syncobj) {
> +			ret = -ENOMEM;
> +			goto unlock;
> +		}
> +		memcpy(syncobj, omap_obj->sync, sizeof(*omap_obj->sync));
> +		omap_obj->flags &= ~OMAP_BO_EXT_SYNC;
> +		omap_obj->sync = syncobj;
> +	} else if (syncobj && !(omap_obj->flags & OMAP_BO_EXT_SYNC)) {
> +		/* replacing an existing syncobj */
> +		if (omap_obj->sync) {
> +			memcpy(syncobj, omap_obj->sync, sizeof(*omap_obj-
> >sync));
> +			kfree(omap_obj->sync);
> +		}
> +		omap_obj->flags |= OMAP_BO_EXT_SYNC;
> +		omap_obj->sync = syncobj;
> +	}
> +
> +unlock:
> +	spin_unlock(&sync_lock);
> +	return ret;
> +}
> +
> +
> +int omap_gem_init_object(struct drm_gem_object *obj)
> +{
> +	return -EINVAL;          /* unused */
> +}
> +
> +/* don't call directly.. called from GEM core when it is time to actually
> + * free the object..
> + */
> +void omap_gem_free_object(struct drm_gem_object *obj)
> +{
> +	struct drm_device *dev = obj->dev;
> +	struct omap_gem_object *omap_obj = to_omap_bo(obj);
> +
> +	if (obj->map_list.map) {
> +		drm_gem_free_mmap_offset(obj);
> +	}
> +
> +	/* don't free externally allocated backing memory */
> +	if (!(omap_obj->flags & OMAP_BO_EXT_MEM)) {
> +		if (omap_obj->pages) {
> +			omap_gem_detach_pages(obj);
> +		}
> +		if (!is_shmem(obj)) {
> +			dma_free_writecombine(dev->dev, obj->size,
> +					omap_obj->vaddr, omap_obj->paddr);
> +		}
> +	}
> +
> +	/* don't free externally allocated syncobj */
> +	if (!(omap_obj->flags & OMAP_BO_EXT_SYNC)) {
> +		kfree(omap_obj->sync);
> +	}
> +
> +	drm_gem_object_release(obj);
> +
> +	kfree(obj);
> +}
> +
> +/* convenience method to construct a GEM buffer object, and userspace
> handle */
> +int omap_gem_new_handle(struct drm_device *dev, struct drm_file *file,
> +		size_t size, uint32_t flags, uint32_t *handle)
> +{
> +	struct drm_gem_object *obj;
> +	int ret;
> +
> +	obj = omap_gem_new(dev, size, flags);
> +	if (!obj)
> +		return -ENOMEM;
> +
> +	ret = drm_gem_handle_create(file, obj, handle);
> +	if (ret) {
> +		drm_gem_object_release(obj);
> +		kfree(obj); /* TODO isn't there a dtor to call? just copying
> i915 */
> +		return ret;
> +	}
> +
> +	/* drop reference from allocate - handle holds it now */
> +	drm_gem_object_unreference_unlocked(obj);
> +
> +	return 0;
> +}
> +
> +/* GEM buffer object constructor */
> +struct drm_gem_object * omap_gem_new(struct drm_device *dev,
> +		size_t size, uint32_t flags)
> +{
> +	struct omap_gem_object *omap_obj;
> +	struct drm_gem_object *obj = NULL;
> +	int ret;
> +
> +	size = PAGE_ALIGN(size);
> +
> +	omap_obj = kzalloc(sizeof(*omap_obj), GFP_KERNEL);
> +	if (!omap_obj) {
> +		dev_err(dev->dev, "could not allocate GEM object\n");
> +		goto fail;
> +	}
> +
> +	obj = &omap_obj->base;
> +
> +	if (flags & OMAP_BO_SCANOUT) {
> +		/* attempt to allocate contiguous memory */
> +		omap_obj->vaddr =  dma_alloc_writecombine(dev->dev, size,
> +				&omap_obj->paddr, GFP_KERNEL);
> +		if (omap_obj->vaddr) {
> +			flags |= OMAP_BO_DMA;
> +		}
> +	}
> +
> +	omap_obj->flags = flags;
> +
> +	if (flags & (OMAP_BO_DMA|OMAP_BO_EXT_MEM)) {
> +		ret = drm_gem_private_object_init(dev, obj, size);
> +	} else {
> +		ret = drm_gem_object_init(dev, obj, size);
> +	}
> +
> +	if (ret) {
> +		goto fail;
> +	}
> +
> +	return obj;
> +
> +fail:
> +	if (obj) {
> +		omap_gem_free_object(obj);
> +	}
> +	return NULL;
> +}
> diff --git a/drivers/video/omap2/omapfb/Kconfig
> b/drivers/video/omap2/omapfb/Kconfig
> index 83d3fe7..4ea17dc 100644
> --- a/drivers/video/omap2/omapfb/Kconfig
> +++ b/drivers/video/omap2/omapfb/Kconfig
> @@ -1,6 +1,6 @@
>  menuconfig FB_OMAP2
>          tristate "OMAP2+ frame buffer support"
> -        depends on FB && OMAP2_DSS
> +        depends on FB && OMAP2_DSS && !DRM_OMAP
> 
>  	select OMAP2_VRAM
>  	select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
> diff --git a/include/drm/Kbuild b/include/drm/Kbuild
> index 3a60ac8..78d451c 100644
> --- a/include/drm/Kbuild
> +++ b/include/drm/Kbuild
> @@ -11,3 +11,4 @@ header-y += savage_drm.h
>  header-y += sis_drm.h
>  header-y += via_drm.h
>  header-y += vmwgfx_drm.h
> +header-y += omap_drm.h
> diff --git a/include/drm/omap_drm.h b/include/drm/omap_drm.h
> new file mode 100644
> index 0000000..ea0ae8e
> --- /dev/null
> +++ b/include/drm/omap_drm.h
> @@ -0,0 +1,111 @@
> +/*
> + * linux/include/drm/omap_drm.h
> + *
> + * Copyright (C) 2011 Texas Instruments
> + * Author: Rob Clark <rob at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __OMAP_DRM_H__
> +#define __OMAP_DRM_H__
> +
> +#include "drm.h"
> +
> +/* Please note that modifications to all structs defined here are
> + * subject to backwards-compatibility constraints.
> + */
> +
> +#define OMAP_PARAM_CHIPSET_ID	1	/* ie. 0x3430, 0x4430, etc
*/
> +
> +struct drm_omap_param {
> +	uint64_t param;			/* in */
> +	uint64_t value;			/* in (set_param), out (get_param)
> */
> +};
> +
> +struct drm_omap_get_base {
> +	char plugin_name[64];		/* in */
> +	uint32_t ioctl_base;		/* out */
> +};
> +
> +#define OMAP_BO_SCANOUT		0x00000001	/* scanout capable
(phys
> contiguous) */
> +#define OMAP_BO_CACHE_MASK	0x00000006	/* cache type mask, see
> cache modes */
> +#define OMAP_BO_TILED_MASK	0x00000f00	/* tiled mapping mask, see
> tiled modes */
> +
> +/* cache modes */
> +#define OMAP_BO_CACHED		0x00000000	/* default */
> +#define OMAP_BO_WC		0x00000002	/* write-combine */
> +#define OMAP_BO_UNCACHED	0x00000004	/* strongly-ordered
(uncached) */
> +
> +/* tiled modes */
> +#define OMAP_BO_TILED_8		0x00000100
> +#define OMAP_BO_TILED_16	0x00000200
> +#define OMAP_BO_TILED_32	0x00000300
> +
> +struct drm_omap_gem_new {
> +	union {				/* in */
> +		uint32_t bytes;		/* (for non-tiled formats) */
> +		struct {
> +			uint16_t width;
> +			uint16_t height;
> +		} tiled;		/* (for tiled formats) */
> +	} size;
> +	uint32_t flags;			/* in */
> +	uint32_t handle;		/* out */
> +};
> +
> +/* mask of operations: */
> +enum omap_gem_op {
> +	OMAP_GEM_READ = 0x01,
> +	OMAP_GEM_WRITE = 0x02,
> +};
> +
> +struct drm_omap_gem_cpu_prep {
> +	uint32_t handle;		/* buffer handle (in) */
> +	uint32_t op;			/* mask of omap_gem_op (in) */
> +};
> +
> +struct drm_omap_gem_cpu_fini {
> +	uint32_t handle;		/* buffer handle (in) */
> +	uint32_t op;			/* mask of omap_gem_op (in) */
> +	/* TODO maybe here we pass down info about what regions are touched
> +	 * by sw so we can be clever about cache ops?  For now a
placeholder,
> +	 * set to zero and we just do full buffer flush..
> +	 */
> +	uint32_t nregions;
> +};
> +
> +struct drm_omap_gem_info {
> +	uint32_t handle;		/* buffer handle (in) */
> +	uint32_t pad;
> +	uint64_t offset;		/* out */
> +};
> +
> +#define DRM_OMAP_GET_PARAM		0x00
> +#define DRM_OMAP_SET_PARAM		0x01
> +#define DRM_OMAP_GET_BASE		0x02
> +#define DRM_OMAP_GEM_NEW		0x03
> +#define DRM_OMAP_GEM_CPU_PREP	0x04
> +#define DRM_OMAP_GEM_CPU_FINI	0x05
> +#define DRM_OMAP_GEM_INFO	0x06
> +#define DRM_OMAP_NUM_IOCTLS		0x07
> +
> +#define DRM_IOCTL_OMAP_GET_PARAM	DRM_IOWR(DRM_COMMAND_BASE +
> DRM_OMAP_GET_PARAM, struct drm_omap_param)
> +#define DRM_IOCTL_OMAP_SET_PARAM	DRM_IOW (DRM_COMMAND_BASE +
> DRM_OMAP_SET_PARAM, struct drm_omap_param)
> +#define DRM_IOCTL_OMAP_GET_BASE		DRM_IOWR(DRM_COMMAND_BASE +
> DRM_OMAP_GET_BASE, struct drm_omap_get_base)
> +#define DRM_IOCTL_OMAP_GEM_NEW		DRM_IOWR(DRM_COMMAND_BASE +
> DRM_OMAP_GEM_NEW, struct drm_omap_gem_new)
> +#define DRM_IOCTL_OMAP_GEM_CPU_PREP	DRM_IOW (DRM_COMMAND_BASE +
> DRM_OMAP_GEM_CPU_PREP, struct drm_omap_gem_cpu_prep)
> +#define DRM_IOCTL_OMAP_GEM_CPU_FINI	DRM_IOW (DRM_COMMAND_BASE +
> DRM_OMAP_GEM_CPU_FINI, struct drm_omap_gem_cpu_fini)
> +#define DRM_IOCTL_OMAP_GEM_INFO		DRM_IOWR(DRM_COMMAND_BASE +
> DRM_OMAP_GEM_INFO, struct drm_omap_gem_info)
> +
> +#endif /* __OMAP_DRM_H__ */
> diff --git a/include/drm/omap_priv.h b/include/drm/omap_priv.h
> new file mode 100644
> index 0000000..ca7d975
> --- /dev/null
> +++ b/include/drm/omap_priv.h
> @@ -0,0 +1,42 @@
> +/*
> + * linux/include/drm/omap_priv.h
> + *
> + * Copyright (C) 2011 Texas Instruments
> + * Author: Rob Clark <rob at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __OMAP_PRIV_H__
> +#define __OMAP_PRIV_H__
> +
> +/* Non-userspace facing APIs
> + */
> +
> +/* optional platform data to configure the default configuration of which
> + * pipes/overlays/CRTCs are used.. if this is not provided, then instead
> the
> + * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected
> to
> + * one manager, with priority given to managers that are connected to
> + * detected devices.  This should be a good default behavior for most
> cases,
> + * but yet there still might be times when you wish to do something
> different.
> + */
> +struct omap_drm_platform_data {
> +	int ovl_cnt;
> +	const int *ovl_ids;
> +	int mgr_cnt;
> +	const int *mgr_ids;
> +	int dev_cnt;
> +	const char **dev_names;
> +};
> +
> +#endif /* __OMAP_DRM_H__ */
> --
> 1.7.5.4



More information about the dri-devel mailing list