[Bug 52266] No DVI output on "ATI Radeon XPRESS 200 5A41 (PCIE)" (ChipID = 0x5a41)

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=52266

--- Comment #7 from Przemek Tomczyk <tomczyk.przemek at gmail.com> 2012-07-20 01:24:24 PDT ---
still no luck. DVI output goes blank, xrandr claims it;s disconnected.

kern.log:
 [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0
 [drm] Initialized drm 1.1.0 20060810
 [drm] radeon defaulting to kernel modesetting.
 [drm] radeon kernel modesetting enabled.
 [drm] initializing kernel modesetting (RS400 0x1002:0x5A41 0x1043:0x81C8).
 [drm] register mmio base: 0xFDDF0000
 [drm] register mmio size: 65536
 [drm] Generation 2 PCI interface, using max accessible memory
 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
 [drm] Driver supports precise vblank timestamp query.
 [drm] radeon: irq initialized.
 [drm] Detected VRAM RAM=256M, BAR=256M
 [drm] RAM width 128bits DDR
 [drm] radeon: 256M of VRAM memory ready
 [drm] radeon: 512M of GTT memory ready.
 [drm] GART: num cpu pages 131072, num gpu pages 131072
 [drm] radeon: ib pool ready.
 [drm] radeon: 4 quad pipes, 1 z pipes initialized.
 [drm] PCIE GART of 512M enabled (table at 0x0000000031680000).
 [drm] fence driver on ring 0 use gpu addr 0x80000000 and cpu addr 0xffb40000
 [drm] Loading R300 Microcode
 [drm] radeon: ring at 0x0000000080001000
 [drm] ring test succeeded in 2 usecs
 [drm] ib test succeeded in 0 usecs
 [drm] Radeon Display Connectors
 [drm] Connector 0:
 [drm]   VGA
 [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
 [drm]   Encoders:
 [drm]     CRT1: INTERNAL_DAC2
 [drm] Connector 1:
 [drm]   DVI-D
 [drm]   HPD2
 [drm]   DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
 [drm]   Encoders:
 [drm]     DFP2: INTERNAL_DVO1
 [drm] Connector 2:
 [drm]   S-video
 [drm]   Encoders:
 [drm]     TV1: INTERNAL_DAC2
 [drm] fb mappable at 0xD0040000
 [drm] vram apper at 0xD0000000
 [drm] size 9216000
 [drm] fb depth is 24
 [drm]    pitch is 7680
 fbcon: radeondrmfb (fb0) is primary device
 fb0: radeondrmfb frame buffer device
 drm: registered panic notifier
 [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0


Xorg.0.log says:
[    19.440] (II) RADEON(0): EDID for output DVI-0
[    19.441] (II) RADEON(0): EDID for output S-video
[    19.441] (II) RADEON(0): Output VGA-0 connected
[    19.441] (II) RADEON(0): Output DVI-0 disconnected
[    19.441] (II) RADEON(0): Output S-video disconnected

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.