[PATCH] drm/omap: use omapdss low level API
Archit Taneja
archit at ti.com
Thu Nov 15 22:44:15 PST 2012
On Friday 16 November 2012 05:30 AM, Rob Clark wrote:
> This patch changes the omapdrm KMS to bypass the omapdss "compat"
> layer and use the core omapdss API directly. This solves some layering
> issues that would cause unpin confusion vs GO bit status, because we
> would not know whether a particular pageflip or overlay update has hit
> the screen or not. Now instead we explicitly manage the GO bits in
> dispc and handle the vblank/framedone interrupts ourself so that we
> always know which buffers are being scanned out at any given time, and
> so on.
>
> As an added bonus, we no longer leave the last overlay buffer pinned
> when the display is disabled, and have been able to add the previously
> missing vblank event handling.
>
> Signed-off-by: Rob Clark <robdclark at gmail.com>
> ---
> Note: this patch applies on top of staging-next plus the "OMAPDSS:
> create compat layer" patch series:
>
> http://comments.gmane.org/gmane.linux.ports.arm.omap/89435
>
> drivers/staging/omapdrm/Makefile | 1 +
> drivers/staging/omapdrm/TODO | 3 -
> drivers/staging/omapdrm/omap_connector.c | 111 +-------
> drivers/staging/omapdrm/omap_crtc.c | 472 +++++++++++++++++++++++++++++--
> drivers/staging/omapdrm/omap_drv.c | 439 +++++-----------------------
> drivers/staging/omapdrm/omap_drv.h | 140 +++++++--
> drivers/staging/omapdrm/omap_encoder.c | 132 ++++-----
> drivers/staging/omapdrm/omap_irq.c | 322 +++++++++++++++++++++
> drivers/staging/omapdrm/omap_plane.c | 452 +++++++++++------------------
> 9 files changed, 1207 insertions(+), 865 deletions(-)
> create mode 100644 drivers/staging/omapdrm/omap_irq.c
>
> diff --git a/drivers/staging/omapdrm/Makefile b/drivers/staging/omapdrm/Makefile
> index 1ca0e00..d85e058 100644
> --- a/drivers/staging/omapdrm/Makefile
> +++ b/drivers/staging/omapdrm/Makefile
> @@ -5,6 +5,7 @@
>
> ccflags-y := -Iinclude/drm -Werror
> omapdrm-y := omap_drv.o \
> + omap_irq.o \
> omap_debugfs.o \
> omap_crtc.o \
> omap_plane.o \
> diff --git a/drivers/staging/omapdrm/TODO b/drivers/staging/omapdrm/TODO
> index 938c788..abeeb00 100644
> --- a/drivers/staging/omapdrm/TODO
> +++ b/drivers/staging/omapdrm/TODO
> @@ -17,9 +17,6 @@ TODO
> . Revisit GEM sync object infrastructure.. TTM has some framework for this
> already. Possibly this could be refactored out and made more common?
> There should be some way to do this with less wheel-reinvention.
> -. Review DSS vs KMS mismatches. The omap_dss_device is sort of part encoder,
> - part connector. Which results in a bit of duct tape to fwd calls from
> - encoder to connector. Possibly this could be done a bit better.
> . Solve PM sequencing on resume. DMM/TILER must be reloaded before any
> access is made from any component in the system. Which means on suspend
> CRTC's should be disabled, and on resume the LUT should be reprogrammed
> diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c
> index 91edb3f..4cc9ee7 100644
> --- a/drivers/staging/omapdrm/omap_connector.c
> +++ b/drivers/staging/omapdrm/omap_connector.c
> @@ -31,9 +31,10 @@
> struct omap_connector {
> struct drm_connector base;
> struct omap_dss_device *dssdev;
> + struct drm_encoder *encoder;
> };
>
> -static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode,
> +void copy_timings_omap_to_drm(struct drm_display_mode *mode,
> struct omap_video_timings *timings)
> {
> mode->clock = timings->pixel_clock;
> @@ -64,7 +65,7 @@ static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode,
> mode->flags |= DRM_MODE_FLAG_NVSYNC;
> }
>
> -static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings,
> +void copy_timings_drm_to_omap(struct omap_video_timings *timings,
> struct drm_display_mode *mode)
> {
> timings->pixel_clock = mode->clock;
> @@ -96,48 +97,7 @@ static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings,
> timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
> }
>
> -static void omap_connector_dpms(struct drm_connector *connector, int mode)
> -{
> - struct omap_connector *omap_connector = to_omap_connector(connector);
> - struct omap_dss_device *dssdev = omap_connector->dssdev;
> - int old_dpms;
> -
> - DBG("%s: %d", dssdev->name, mode);
> -
> - old_dpms = connector->dpms;
> -
> - /* from off to on, do from crtc to connector */
> - if (mode < old_dpms)
> - drm_helper_connector_dpms(connector, mode);
> -
> - if (mode == DRM_MODE_DPMS_ON) {
> - /* store resume info for suspended displays */
> - switch (dssdev->state) {
> - case OMAP_DSS_DISPLAY_SUSPENDED:
> - dssdev->activate_after_resume = true;
> - break;
> - case OMAP_DSS_DISPLAY_DISABLED: {
> - int ret = dssdev->driver->enable(dssdev);
> - if (ret) {
> - DBG("%s: failed to enable: %d",
> - dssdev->name, ret);
> - dssdev->driver->disable(dssdev);
> - }
> - break;
> - }
> - default:
> - break;
> - }
> - } else {
> - /* TODO */
> - }
> -
> - /* from on to off, do from connector to crtc */
> - if (mode > old_dpms)
> - drm_helper_connector_dpms(connector, mode);
> -}
> -
> -enum drm_connector_status omap_connector_detect(
> +static enum drm_connector_status omap_connector_detect(
> struct drm_connector *connector, bool force)
> {
> struct omap_connector *omap_connector = to_omap_connector(connector);
> @@ -164,8 +124,6 @@ static void omap_connector_destroy(struct drm_connector *connector)
> struct omap_connector *omap_connector = to_omap_connector(connector);
> struct omap_dss_device *dssdev = omap_connector->dssdev;
>
> - dssdev->driver->disable(dssdev);
> -
> DBG("%s", omap_connector->dssdev->name);
> drm_sysfs_connector_remove(connector);
> drm_connector_cleanup(connector);
> @@ -261,36 +219,12 @@ static int omap_connector_mode_valid(struct drm_connector *connector,
> struct drm_encoder *omap_connector_attached_encoder(
> struct drm_connector *connector)
> {
> - int i;
> struct omap_connector *omap_connector = to_omap_connector(connector);
> -
> - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
> - struct drm_mode_object *obj;
> -
> - if (connector->encoder_ids[i] == 0)
> - break;
> -
> - obj = drm_mode_object_find(connector->dev,
> - connector->encoder_ids[i],
> - DRM_MODE_OBJECT_ENCODER);
> -
> - if (obj) {
> - struct drm_encoder *encoder = obj_to_encoder(obj);
> - struct omap_overlay_manager *mgr =
> - omap_encoder_get_manager(encoder);
> - DBG("%s: found %s", omap_connector->dssdev->name,
> - mgr->name);
> - return encoder;
> - }
> - }
> -
> - DBG("%s: no encoder", omap_connector->dssdev->name);
> -
> - return NULL;
> + return omap_connector->encoder;
> }
>
> static const struct drm_connector_funcs omap_connector_funcs = {
> - .dpms = omap_connector_dpms,
> + .dpms = drm_helper_connector_dpms,
> .detect = omap_connector_detect,
> .fill_modes = drm_helper_probe_single_connector_modes,
> .destroy = omap_connector_destroy,
> @@ -302,34 +236,6 @@ static const struct drm_connector_helper_funcs omap_connector_helper_funcs = {
> .best_encoder = omap_connector_attached_encoder,
> };
>
> -/* called from encoder when mode is set, to propagate settings to the dssdev */
> -void omap_connector_mode_set(struct drm_connector *connector,
> - struct drm_display_mode *mode)
> -{
> - struct drm_device *dev = connector->dev;
> - struct omap_connector *omap_connector = to_omap_connector(connector);
> - struct omap_dss_device *dssdev = omap_connector->dssdev;
> - struct omap_dss_driver *dssdrv = dssdev->driver;
> - struct omap_video_timings timings = {0};
> -
> - copy_timings_drm_to_omap(&timings, mode);
> -
> - DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
> - omap_connector->dssdev->name,
> - mode->base.id, mode->name, mode->vrefresh, mode->clock,
> - mode->hdisplay, mode->hsync_start,
> - mode->hsync_end, mode->htotal,
> - mode->vdisplay, mode->vsync_start,
> - mode->vsync_end, mode->vtotal, mode->type, mode->flags);
> -
> - if (dssdrv->check_timings(dssdev, &timings)) {
> - dev_err(dev->dev, "could not set timings\n");
> - return;
> - }
> -
> - dssdrv->set_timings(dssdev, &timings);
> -}
> -
> /* flush an area of the framebuffer (in case of manual update display that
> * is not automatically flushed)
> */
> @@ -344,7 +250,8 @@ void omap_connector_flush(struct drm_connector *connector,
>
> /* initialize connector */
> struct drm_connector *omap_connector_init(struct drm_device *dev,
> - int connector_type, struct omap_dss_device *dssdev)
> + int connector_type, struct omap_dss_device *dssdev,
> + struct drm_encoder *encoder)
> {
> struct drm_connector *connector = NULL;
> struct omap_connector *omap_connector;
> @@ -360,6 +267,8 @@ struct drm_connector *omap_connector_init(struct drm_device *dev,
> }
>
> omap_connector->dssdev = dssdev;
> + omap_connector->encoder = encoder;
> +
> connector = &omap_connector->base;
>
> drm_connector_init(dev, connector, &omap_connector_funcs,
> diff --git a/drivers/staging/omapdrm/omap_crtc.c b/drivers/staging/omapdrm/omap_crtc.c
> index 3e2c736..e3496e5 100644
> --- a/drivers/staging/omapdrm/omap_crtc.c
> +++ b/drivers/staging/omapdrm/omap_crtc.c
> @@ -28,19 +28,131 @@
> struct omap_crtc {
> struct drm_crtc base;
> struct drm_plane *plane;
> +
> const char *name;
> - int id;
> + int pipe;
> + enum omap_channel channel;
> + struct omap_overlay_manager_info info;
> +
> + /*
> + * Temporary: eventually this will go away, but it is needed
> + * for now to keep the output's happy. (They only need
> + * mgr->id.) Eventually this will be replaced w/ something
> + * more common-panel-framework-y
> + */
> + struct omap_overlay_manager mgr;
> +
> + struct omap_video_timings timings;
> + bool enabled;
> + bool full_update;
> +
> + struct omap_drm_apply apply;
> +
> + struct omap_drm_irq apply_irq;
> + struct omap_drm_irq error_irq;
> +
> + /* list of in-progress apply's: */
> + struct list_head pending_applies;
> +
> + /* list of queued apply's: */
> + struct list_head queued_applies;
> +
> + /* for handling queued and in-progress applies: */
> + struct work_struct apply_work;
>
> /* if there is a pending flip, these will be non-null: */
> struct drm_pending_vblank_event *event;
> struct drm_framebuffer *old_fb;
> +
> + /* for handling page flips without caring about what
> + * the callback is called from. Possibly we should just
> + * make omap_gem always call the cb from the worker so
> + * we don't have to care about this..
> + *
> + * XXX maybe fold into apply_work??
> + */
> + struct work_struct page_flip_work;
> };
>
> +/*
> + * Manager-ops, callbacks from output when they need to configure
> + * the upstream part of the video pipe.
> + *
> + * Most of these we can ignore until we add support for command-mode
> + * panels.. for video-mode the crtc-helpers already do an adequate
> + * job of sequencing the setup of the video pipe in the proper order
> + */
> +
> +/* we can probably ignore these until we support command-mode panels: */
> +static void omap_crtc_start_update(struct omap_overlay_manager *mgr)
> +{
> +}
> +
> +static int omap_crtc_enable(struct omap_overlay_manager *mgr)
> +{
> + return 0;
> +}
> +
> +static void omap_crtc_disable(struct omap_overlay_manager *mgr)
> +{
> +}
> +
> +static void omap_crtc_set_timings(struct omap_overlay_manager *mgr,
> + const struct omap_video_timings *timings)
> +{
> + struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr);
> + DBG("%s", omap_crtc->name);
> + omap_crtc->timings = *timings;
> + omap_crtc->full_update = true;
> +}
> +
> +static void omap_crtc_set_lcd_config(struct omap_overlay_manager *mgr,
> + const struct dss_lcd_mgr_config *config)
> +{
> + struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr);
> + DBG("%s", omap_crtc->name);
> + dispc_mgr_set_lcd_config(omap_crtc->channel, config);
Maybe you should move this dispc write also to omap_crtc_pre_apply, the
same way it's done for timings. We'll also be confident about having the
clocks required if this is called in pre_apply.
> +}
> +
> +static int omap_crtc_register_framedone_handler(
> + struct omap_overlay_manager *mgr,
> + void (*handler)(void *), void *data)
> +{
> + return 0;
> +}
> +
> +static void omap_crtc_unregister_framedone_handler(
> + struct omap_overlay_manager *mgr,
> + void (*handler)(void *), void *data)
> +{
> +}
> +
> +static const struct dss_mgr_ops mgr_ops = {
> + .start_update = omap_crtc_start_update,
> + .enable = omap_crtc_enable,
> + .disable = omap_crtc_disable,
> + .set_timings = omap_crtc_set_timings,
> + .set_lcd_config = omap_crtc_set_lcd_config,
> + .register_framedone_handler = omap_crtc_register_framedone_handler,
> + .unregister_framedone_handler = omap_crtc_unregister_framedone_handler,
> +};
> +
> +/*
> + * CRTC funcs:
> + */
> +
> static void omap_crtc_destroy(struct drm_crtc *crtc)
> {
> struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> +
> + DBG("%s", omap_crtc->name);
> +
> + WARN_ON(omap_crtc->apply_irq.registered);
> + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq);
> +
> omap_crtc->plane->funcs->destroy(omap_crtc->plane);
> drm_crtc_cleanup(crtc);
> +
> kfree(omap_crtc);
> }
>
> @@ -48,14 +160,25 @@ static void omap_crtc_dpms(struct drm_crtc *crtc, int mode)
> {
> struct omap_drm_private *priv = crtc->dev->dev_private;
> struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> + bool enabled = (mode == DRM_MODE_DPMS_ON);
> int i;
>
> - WARN_ON(omap_plane_dpms(omap_crtc->plane, mode));
> + DBG("%s: %d", omap_crtc->name, mode);
> +
> + if (enabled != omap_crtc->enabled) {
> + omap_crtc->enabled = enabled;
> + omap_crtc->full_update = true;
> + omap_crtc_apply(crtc, &omap_crtc->apply);
>
> - for (i = 0; i < priv->num_planes; i++) {
> - struct drm_plane *plane = priv->planes[i];
> - if (plane->crtc == crtc)
> - WARN_ON(omap_plane_dpms(plane, mode));
> + /* also enable our private plane: */
> + WARN_ON(omap_plane_dpms(omap_crtc->plane, mode));
> +
> + /* and any attached overlay planes: */
> + for (i = 0; i < priv->num_planes; i++) {
> + struct drm_plane *plane = priv->planes[i];
> + if (plane->crtc == crtc)
> + WARN_ON(omap_plane_dpms(plane, mode));
> + }
> }
> }
>
> @@ -73,12 +196,26 @@ static int omap_crtc_mode_set(struct drm_crtc *crtc,
> struct drm_framebuffer *old_fb)
> {
> struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> - struct drm_plane *plane = omap_crtc->plane;
>
> - return omap_plane_mode_set(plane, crtc, crtc->fb,
> + mode = adjusted_mode;
> +
> + DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
> + omap_crtc->name, mode->base.id, mode->name,
> + mode->vrefresh, mode->clock,
> + mode->hdisplay, mode->hsync_start,
> + mode->hsync_end, mode->htotal,
> + mode->vdisplay, mode->vsync_start,
> + mode->vsync_end, mode->vtotal,
> + mode->type, mode->flags);
> +
> + copy_timings_drm_to_omap(&omap_crtc->timings, mode);
> + omap_crtc->full_update = true;
> +
> + return omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb,
> 0, 0, mode->hdisplay, mode->vdisplay,
> x << 16, y << 16,
> - mode->hdisplay << 16, mode->vdisplay << 16);
> + mode->hdisplay << 16, mode->vdisplay << 16,
> + NULL, NULL);
> }
>
> static void omap_crtc_prepare(struct drm_crtc *crtc)
> @@ -102,10 +239,11 @@ static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> struct drm_plane *plane = omap_crtc->plane;
> struct drm_display_mode *mode = &crtc->mode;
>
> - return plane->funcs->update_plane(plane, crtc, crtc->fb,
> + return omap_plane_mode_set(plane, crtc, crtc->fb,
> 0, 0, mode->hdisplay, mode->vdisplay,
> x << 16, y << 16,
> - mode->hdisplay << 16, mode->vdisplay << 16);
> + mode->hdisplay << 16, mode->vdisplay << 16,
> + NULL, NULL);
> }
>
> static void omap_crtc_load_lut(struct drm_crtc *crtc)
> @@ -123,7 +261,7 @@ static void vblank_cb(void *arg)
>
> /* wakeup userspace */
> if (omap_crtc->event)
> - drm_send_vblank_event(dev, -1, omap_crtc->event);
> + drm_send_vblank_event(dev, omap_crtc->pipe, omap_crtc->event);
>
> omap_crtc->event = NULL;
> omap_crtc->old_fb = NULL;
> @@ -131,25 +269,37 @@ static void vblank_cb(void *arg)
> spin_unlock_irqrestore(&dev->event_lock, flags);
> }
>
> -static void page_flip_cb(void *arg)
> +static void page_flip_worker(struct work_struct *work)
> {
> - struct drm_crtc *crtc = arg;
> - struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> - struct drm_framebuffer *old_fb = omap_crtc->old_fb;
> + struct omap_crtc *omap_crtc =
> + container_of(work, struct omap_crtc, page_flip_work);
> + struct drm_crtc *crtc = &omap_crtc->base;
> + struct drm_device *dev = crtc->dev;
> + struct drm_display_mode *mode = &crtc->mode;
> struct drm_gem_object *bo;
>
> - omap_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb);
> -
> - /* really we'd like to setup the callback atomically w/ setting the
> - * new scanout buffer to avoid getting stuck waiting an extra vblank
> - * cycle.. for now go for correctness and later figure out speed..
> - */
> - omap_plane_on_endwin(omap_crtc->plane, vblank_cb, crtc);
> + mutex_lock(&dev->mode_config.mutex);
> + omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb,
> + 0, 0, mode->hdisplay, mode->vdisplay,
> + crtc->x << 16, crtc->y << 16,
> + mode->hdisplay << 16, mode->vdisplay << 16,
> + vblank_cb, crtc);
> + mutex_unlock(&dev->mode_config.mutex);
>
> bo = omap_framebuffer_bo(crtc->fb, 0);
> drm_gem_object_unreference_unlocked(bo);
> }
>
> +static void page_flip_cb(void *arg)
> +{
> + struct drm_crtc *crtc = arg;
> + struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> + struct omap_drm_private *priv = crtc->dev->dev_private;
> +
> + /* avoid assumptions about what ctxt we are called from: */
> + queue_work(priv->wq, &omap_crtc->page_flip_work);
> +}
> +
> static int omap_crtc_page_flip_locked(struct drm_crtc *crtc,
> struct drm_framebuffer *fb,
> struct drm_pending_vblank_event *event)
> @@ -158,14 +308,14 @@ static int omap_crtc_page_flip_locked(struct drm_crtc *crtc,
> struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> struct drm_gem_object *bo;
>
> - DBG("%d -> %d", crtc->fb ? crtc->fb->base.id : -1, fb->base.id);
> + DBG("%d -> %d (event=%p)", crtc->fb ? crtc->fb->base.id : -1,
> + fb->base.id, event);
>
> if (omap_crtc->old_fb) {
> dev_err(dev->dev, "already a pending flip\n");
> return -EINVAL;
> }
>
> - omap_crtc->old_fb = crtc->fb;
> omap_crtc->event = event;
> crtc->fb = fb;
>
> @@ -213,14 +363,244 @@ static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = {
> .load_lut = omap_crtc_load_lut,
> };
>
> +const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc)
> +{
> + struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> + return &omap_crtc->timings;
> +}
> +
> +enum omap_channel omap_crtc_channel(struct drm_crtc *crtc)
> +{
> + struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> + return omap_crtc->channel;
> +}
> +
> +static void omap_crtc_error_irq(struct omap_drm_irq *irq, uint32_t irqstatus)
> +{
> + struct omap_crtc *omap_crtc =
> + container_of(irq, struct omap_crtc, error_irq);
> + struct drm_crtc *crtc = &omap_crtc->base;
> + DRM_ERROR("%s: errors: %08x\n", omap_crtc->name, irqstatus);
> + /* avoid getting in a flood, unregister the irq until next vblank */
> + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq);
> +}
> +
> +static void omap_crtc_apply_irq(struct omap_drm_irq *irq, uint32_t irqstatus)
> +{
> + struct omap_crtc *omap_crtc =
> + container_of(irq, struct omap_crtc, apply_irq);
> + struct drm_crtc *crtc = &omap_crtc->base;
> +
> + if (!omap_crtc->error_irq.registered)
> + omap_irq_register(crtc->dev, &omap_crtc->error_irq);
> +
> + if (!dispc_mgr_go_busy(omap_crtc->channel)) {
> + struct omap_drm_private *priv =
> + crtc->dev->dev_private;
> + DBG("%s: apply done", omap_crtc->name);
> + omap_irq_unregister(crtc->dev, &omap_crtc->apply_irq);
> + queue_work(priv->wq, &omap_crtc->apply_work);
> + }
> +}
> +
> +static void apply_worker(struct work_struct *work)
> +{
> + struct omap_crtc *omap_crtc =
> + container_of(work, struct omap_crtc, apply_work);
> + struct drm_crtc *crtc = &omap_crtc->base;
> + struct drm_device *dev = crtc->dev;
> + struct omap_drm_apply *apply, *n;
> + bool need_apply;
> +
> + /*
> + * Synchronize everything on mode_config.mutex, to keep
> + * the callbacks and list modification all serialized
> + * with respect to modesetting ioctls from userspace.
> + */
> + mutex_lock(&dev->mode_config.mutex);
> + dispc_runtime_get();
> +
> + /*
> + * If we are still pending a previous update, wait.. when the
> + * pending update completes, we get kicked again.
> + */
> + if (omap_crtc->apply_irq.registered)
> + goto out;
> +
> + /* finish up previous apply's: */
> + list_for_each_entry_safe(apply, n,
> + &omap_crtc->pending_applies, pending_node) {
> + apply->post_apply(apply);
> + list_del(&apply->pending_node);
> + }
> +
> + need_apply = !list_empty(&omap_crtc->queued_applies);
> +
> + /* then handle the next round of of queued apply's: */
> + list_for_each_entry_safe(apply, n,
> + &omap_crtc->queued_applies, queued_node) {
> + apply->pre_apply(apply);
> + list_del(&apply->queued_node);
> + apply->queued = false;
> + list_add_tail(&apply->pending_node,
> + &omap_crtc->pending_applies);
> + }
> +
> + if (need_apply) {
> + enum omap_channel channel = omap_crtc->channel;
> +
> + DBG("%s: GO", omap_crtc->name);
> +
> + if (dispc_mgr_is_enabled(channel)) {
> + omap_irq_register(dev, &omap_crtc->apply_irq);
> + dispc_mgr_go(channel);
> + } else if (!dispc_mgr_go_busy(channel)) {
I'm not clear about this. Why would GO be set in the first place if the
manager isn't enabled? This could be replaced with a simple 'else'
> + struct omap_drm_private *priv = dev->dev_private;
> + queue_work(priv->wq, &omap_crtc->apply_work);
> + }
> + }
> +
> +out:
> + dispc_runtime_put();
> + mutex_unlock(&dev->mode_config.mutex);
> +}
> +
> +int omap_crtc_apply(struct drm_crtc *crtc,
> + struct omap_drm_apply *apply)
> +{
> + struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
> +
> + /* no need to queue it again if it is already queued: */
> + if (apply->queued)
> + return 0;
> +
> + apply->queued = true;
> + list_add_tail(&apply->queued_node, &omap_crtc->queued_applies);
> +
> + /*
> + * If there are no currently pending updates, then go ahead and
> + * kick the worker immediately, otherwise it will run again when
> + * the current update finishes.
> + */
> + if (list_empty(&omap_crtc->pending_applies)) {
> + struct omap_drm_private *priv = crtc->dev->dev_private;
> + queue_work(priv->wq, &omap_crtc->apply_work);
> + }
> +
> + return 0;
> +}
> +
> +/* called only from apply */
> +static void set_enabled(struct drm_crtc *crtc, bool enable)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> + enum omap_channel channel = omap_crtc->channel;
> + struct omap_irq_wait *wait = NULL;
> +
> + if (dispc_mgr_is_enabled(channel) == enable)
> + return;
> +
> + /* ignore sync-lost irqs during enable/disable */
> + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq);
> +
> + if (dispc_mgr_get_framedone_irq(channel)) {
> + if (!enable) {
> + wait = omap_irq_wait_init(dev,
> + dispc_mgr_get_framedone_irq(channel), 1);
> + }
> + } else {
> + /*
> + * When we disable digit output, we need to wait until fields
> + * are done. Otherwise the DSS is still working, and turning
> + * off the clocks prevents DSS from going to OFF mode. And when
> + * enabling, we need to wait for the extra sync losts
> + */
> + wait = omap_irq_wait_init(dev,
> + dispc_mgr_get_vsync_irq(channel), 2);
> + }
> +
> + dispc_mgr_enable(channel, enable);
> +
> + if (wait) {
> + int ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100));
> + if (ret) {
> + dev_err(dev->dev, "%s: timeout waiting for %s\n",
> + omap_crtc->name, enable ? "enable" : "disable");
> + }
> + }
> +
> + omap_irq_register(crtc->dev, &omap_crtc->error_irq);
> +}
> +
> +static void omap_crtc_pre_apply(struct omap_drm_apply *apply)
> +{
> + struct omap_crtc *omap_crtc =
> + container_of(apply, struct omap_crtc, apply);
> + struct drm_crtc *crtc = &omap_crtc->base;
> + struct drm_encoder *encoder = NULL;
> +
> + DBG("%s: enabled=%d, full=%d", omap_crtc->name,
> + omap_crtc->enabled, omap_crtc->full_update);
> +
> + if (omap_crtc->full_update) {
If I get it right, full_update refers to manager properties that
previously used to propogate downstream from the output driver to dispc,
i.e, things like timings and so on. and the ones which aren't
full_update are upstream properties like transparency keys,
default_color and so on?
> + struct omap_drm_private *priv = crtc->dev->dev_private;
> + int i;
> + for (i = 0; i < priv->num_encoders; i++) {
> + if (priv->encoders[i]->crtc == crtc) {
> + encoder = priv->encoders[i];
> + break;
> + }
> + }
> + }
> +
> + if (!omap_crtc->enabled) {
> + set_enabled(&omap_crtc->base, false);
> + if (encoder)
> + omap_encoder_set_enabled(encoder, false);
> + } else {
> + if (encoder) {
> + omap_encoder_set_enabled(encoder, false);
> + omap_encoder_update(encoder, &omap_crtc->mgr,
> + &omap_crtc->timings);
> + omap_encoder_set_enabled(encoder, true);
> + omap_crtc->full_update = false;
> + }
> +
> + dispc_mgr_setup(omap_crtc->channel, &omap_crtc->info);
> + dispc_mgr_set_timings(omap_crtc->channel,
> + &omap_crtc->timings);
> + set_enabled(&omap_crtc->base, true);
> + }
> +
> + omap_crtc->full_update = false;
> +}
> +
><
snip
>
> -static int omap_modeset_init(struct drm_device *dev)
> -{
> - const struct omap_drm_platform_data *pdata = dev->dev->platform_data;
> - struct omap_kms_platform_data *kms_pdata = NULL;
> - struct omap_drm_private *priv = dev->dev_private;
> - struct omap_dss_device *dssdev = NULL;
> - int i, j;
> - unsigned int connected_connectors = 0;
> + encoder = omap_encoder_init(dev, dssdev);
>
> - drm_mode_config_init(dev);
> -
> - if (pdata && pdata->kms_pdata) {
> - kms_pdata = pdata->kms_pdata;
> -
> - /* if platform data is provided by the board file, use it to
> - * control which overlays, managers, and devices we own.
> - */
> - for (i = 0; i < kms_pdata->mgr_cnt; i++) {
> - struct omap_overlay_manager *mgr =
> - omap_dss_get_overlay_manager(
> - kms_pdata->mgr_ids[i]);
> - create_encoder(dev, mgr);
> - }
> -
> - for (i = 0; i < kms_pdata->dev_cnt; i++) {
> - struct omap_dss_device *dssdev =
> - omap_dss_find_device(
> - (void *)kms_pdata->dev_names[i],
> - match_dev_name);
> - if (!dssdev) {
> - dev_warn(dev->dev, "no such dssdev: %s\n",
> - kms_pdata->dev_names[i]);
> - continue;
> - }
> - create_connector(dev, dssdev);
> + if (!encoder) {
> + dev_err(dev->dev, "could not create encoder: %s\n",
> + dssdev->name);
> + return -ENOMEM;
> }
>
> - connected_connectors = detect_connectors(dev);
> + connector = omap_connector_init(dev,
> + get_connector_type(dssdev), dssdev, encoder);
>
> - j = 0;
> - for (i = 0; i < kms_pdata->ovl_cnt; i++) {
> - struct omap_overlay *ovl =
> - omap_dss_get_overlay(kms_pdata->ovl_ids[i]);
> - create_crtc(dev, ovl, &j, connected_connectors);
> + if (!connector) {
> + dev_err(dev->dev, "could not create connector: %s\n",
> + dssdev->name);
> + return -ENOMEM;
> }
>
> - for (i = 0; i < kms_pdata->pln_cnt; i++) {
> - struct omap_overlay *ovl =
> - omap_dss_get_overlay(kms_pdata->pln_ids[i]);
> - create_plane(dev, ovl, (1 << priv->num_crtcs) - 1);
> - }
> - } else {
> - /* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try
> - * to make educated guesses about everything else
> - */
> - int max_overlays = min(omap_dss_get_num_overlays(), num_crtc);
> + BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders));
> + BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors));
>
> - for (i = 0; i < omap_dss_get_num_overlay_managers(); i++)
> - create_encoder(dev, omap_dss_get_overlay_manager(i));
> -
> - for_each_dss_dev(dssdev) {
> - create_connector(dev, dssdev);
> - }
> + priv->encoders[priv->num_encoders++] = encoder;
> + priv->connectors[priv->num_connectors++] = connector;
>
> - connected_connectors = detect_connectors(dev);
> + drm_mode_connector_attach_encoder(connector, encoder);
>
> - j = 0;
> - for (i = 0; i < max_overlays; i++) {
> - create_crtc(dev, omap_dss_get_overlay(i),
> - &j, connected_connectors);
> - }
> -
> - /* use any remaining overlays as drm planes */
> - for (; i < omap_dss_get_num_overlays(); i++) {
> - struct omap_overlay *ovl = omap_dss_get_overlay(i);
> - create_plane(dev, ovl, (1 << priv->num_crtcs) - 1);
> + /* figure out which crtc's we can connect the encoder to: */
> + encoder->possible_crtcs = 0;
> + for (id = 0; id < priv->num_crtcs; id++) {
> + enum omap_display_type supported_displays =
> + dss_feat_get_supported_displays(pipe2chan(id));
We could use the newer version here: dss_feat_get_supported_outputs(),
this will tell what all outputs a manager can connect to.
> + if (supported_displays & dssdev->type)
> + encoder->possible_crtcs |= (1 << id);
> }
> }
>
> - /* for now keep the mapping of CRTCs and encoders static.. */
> - for (i = 0; i < priv->num_encoders; i++) {
> - struct drm_encoder *encoder = priv->encoders[i];
> - struct omap_overlay_manager *mgr =
> - omap_encoder_get_manager(encoder);
> -
> - encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;
> -
> - DBG("%s: possible_crtcs=%08x", mgr->name,
> - encoder->possible_crtcs);
> - }
> -
> - dump_video_chains();
> -
> dev->mode_config.min_width = 32;
> dev->mode_config.min_height = 32;
>
> @@ -450,7 +229,7 @@ static int ioctl_gem_new(struct drm_device *dev, void *data,
> struct drm_file *file_priv)
> {
> struct drm_omap_gem_new *args = data;
> - DBG("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
> + VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
> args->size.bytes, args->flags);
> return omap_gem_new_handle(dev, file_priv, args->size,
> args->flags, &args->handle);
> @@ -510,7 +289,7 @@ static int ioctl_gem_info(struct drm_device *dev, void *data,
> struct drm_gem_object *obj;
> int ret = 0;
>
> - DBG("%p:%p: handle=%d", dev, file_priv, args->handle);
> + VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
>
> obj = drm_gem_object_lookup(dev, file_priv, args->handle);
> if (!obj)
> @@ -565,14 +344,6 @@ static int dev_load(struct drm_device *dev, unsigned long flags)
>
> dev->dev_private = priv;
>
> - ret = omapdss_compat_init();
> - if (ret) {
> - dev_err(dev->dev, "coult not init omapdss\n");
> - dev->dev_private = NULL;
> - kfree(priv);
> - return ret;
> - }
> -
How can omapdss_compat_init/ininit already exist in the driver, and
removed in this patch?
<snip>
Archit
More information about the dri-devel
mailing list