[PATCH 19/53] drm/radeon: switch to pptable.h
Alex Deucher
alexdeucher at gmail.com
Mon Aug 12 09:43:11 PDT 2013
Internally we switched to using a separate header for
atombios pplib definitions. Switch over the open source
driver.
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
drivers/gpu/drm/radeon/atombios.h | 615 +---------------------------------
drivers/gpu/drm/radeon/pptable.h | 682 ++++++++++++++++++++++++++++++++++++++
2 files changed, 685 insertions(+), 612 deletions(-)
create mode 100644 drivers/gpu/drm/radeon/pptable.h
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 16b120c..af10f85 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -7661,618 +7661,6 @@ typedef struct _ATOM_POWERPLAY_INFO_V3
ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
}ATOM_POWERPLAY_INFO_V3;
-/* New PPlib */
-/**************************************************************************/
-typedef struct _ATOM_PPLIB_THERMALCONTROLLER
-
-{
- UCHAR ucType; // one of ATOM_PP_THERMALCONTROLLER_*
- UCHAR ucI2cLine; // as interpreted by DAL I2C
- UCHAR ucI2cAddress;
- UCHAR ucFanParameters; // Fan Control Parameters.
- UCHAR ucFanMinRPM; // Fan Minimum RPM (hundreds) -- for display purposes only.
- UCHAR ucFanMaxRPM; // Fan Maximum RPM (hundreds) -- for display purposes only.
- UCHAR ucReserved; // ----
- UCHAR ucFlags; // to be defined
-} ATOM_PPLIB_THERMALCONTROLLER;
-
-#define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f
-#define ATOM_PP_FANPARAMETERS_NOFAN 0x80 // No fan is connected to this controller.
-
-#define ATOM_PP_THERMALCONTROLLER_NONE 0
-#define ATOM_PP_THERMALCONTROLLER_LM63 1 // Not used by PPLib
-#define ATOM_PP_THERMALCONTROLLER_ADM1032 2 // Not used by PPLib
-#define ATOM_PP_THERMALCONTROLLER_ADM1030 3 // Not used by PPLib
-#define ATOM_PP_THERMALCONTROLLER_MUA6649 4 // Not used by PPLib
-#define ATOM_PP_THERMALCONTROLLER_LM64 5
-#define ATOM_PP_THERMALCONTROLLER_F75375 6 // Not used by PPLib
-#define ATOM_PP_THERMALCONTROLLER_RV6xx 7
-#define ATOM_PP_THERMALCONTROLLER_RV770 8
-#define ATOM_PP_THERMALCONTROLLER_ADT7473 9
-#define ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO 11
-#define ATOM_PP_THERMALCONTROLLER_EVERGREEN 12
-#define ATOM_PP_THERMALCONTROLLER_EMC2103 13 /* 0x0D */ // Only fan control will be implemented, do NOT show this in PPGen.
-#define ATOM_PP_THERMALCONTROLLER_SUMO 14 /* 0x0E */ // Sumo type, used internally
-#define ATOM_PP_THERMALCONTROLLER_NISLANDS 15
-#define ATOM_PP_THERMALCONTROLLER_SISLANDS 16
-#define ATOM_PP_THERMALCONTROLLER_LM96163 17
-#define ATOM_PP_THERMALCONTROLLER_CISLANDS 18
-
-// Thermal controller 'combo type' to use an external controller for Fan control and an internal controller for thermal.
-// We probably should reserve the bit 0x80 for this use.
-// To keep the number of these types low we should also use the same code for all ASICs (i.e. do not distinguish RV6xx and RV7xx Internal here).
-// The driver can pick the correct internal controller based on the ASIC.
-
-#define ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL 0x89 // ADT7473 Fan Control + Internal Thermal Controller
-#define ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL 0x8D // EMC2103 Fan Control + Internal Thermal Controller
-
-typedef struct _ATOM_PPLIB_STATE
-{
- UCHAR ucNonClockStateIndex;
- UCHAR ucClockStateIndices[1]; // variable-sized
-} ATOM_PPLIB_STATE;
-
-
-typedef struct _ATOM_PPLIB_FANTABLE
-{
- UCHAR ucFanTableFormat; // Change this if the table format changes or version changes so that the other fields are not the same.
- UCHAR ucTHyst; // Temperature hysteresis. Integer.
- USHORT usTMin; // The temperature, in 0.01 centigrades, below which we just run at a minimal PWM.
- USHORT usTMed; // The middle temperature where we change slopes.
- USHORT usTHigh; // The high point above TMed for adjusting the second slope.
- USHORT usPWMMin; // The minimum PWM value in percent (0.01% increments).
- USHORT usPWMMed; // The PWM value (in percent) at TMed.
- USHORT usPWMHigh; // The PWM value at THigh.
-} ATOM_PPLIB_FANTABLE;
-
-typedef struct _ATOM_PPLIB_FANTABLE2
-{
- ATOM_PPLIB_FANTABLE basicTable;
- USHORT usTMax; // The max temperature
-} ATOM_PPLIB_FANTABLE2;
-
-typedef struct _ATOM_PPLIB_EXTENDEDHEADER
-{
- USHORT usSize;
- ULONG ulMaxEngineClock; // For Overdrive.
- ULONG ulMaxMemoryClock; // For Overdrive.
- // Add extra system parameters here, always adjust size to include all fields.
- USHORT usVCETableOffset; //points to ATOM_PPLIB_VCE_Table
- USHORT usUVDTableOffset; //points to ATOM_PPLIB_UVD_Table
- USHORT usSAMUTableOffset; //points to ATOM_PPLIB_SAMU_Table
- USHORT usPPMTableOffset; //points to ATOM_PPLIB_PPM_Table
-} ATOM_PPLIB_EXTENDEDHEADER;
-
-//// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps
-#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1
-#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2
-#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4
-#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8
-#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16
-#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32
-#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64
-#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128
-#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256
-#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512
-#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024
-#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048
-#define ATOM_PP_PLATFORM_CAP_MVDDCONTROL 4096
-#define ATOM_PP_PLATFORM_CAP_GOTO_BOOT_ON_ALERT 0x2000 // Go to boot state on alerts, e.g. on an AC->DC transition.
-#define ATOM_PP_PLATFORM_CAP_DONT_WAIT_FOR_VBLANK_ON_ALERT 0x4000 // Do NOT wait for VBLANK during an alert (e.g. AC->DC transition).
-#define ATOM_PP_PLATFORM_CAP_VDDCI_CONTROL 0x8000 // Does the driver control VDDCI independently from VDDC.
-#define ATOM_PP_PLATFORM_CAP_REGULATOR_HOT 0x00010000 // Enable the 'regulator hot' feature.
-#define ATOM_PP_PLATFORM_CAP_BACO 0x00020000 // Does the driver supports BACO state.
-#define ATOM_PP_PLATFORM_CAP_NEW_CAC_VOLTAGE 0x00040000 // Does the driver supports new CAC voltage table.
-#define ATOM_PP_PLATFORM_CAP_REVERT_GPIO5_POLARITY 0x00080000 // Does the driver supports revert GPIO5 polarity.
-#define ATOM_PP_PLATFORM_CAP_OUTPUT_THERMAL2GPIO17 0x00100000 // Does the driver supports thermal2GPIO17.
-#define ATOM_PP_PLATFORM_CAP_VRHOT_GPIO_CONFIGURABLE 0x00200000 // Does the driver supports VR HOT GPIO Configurable.
-
-typedef struct _ATOM_PPLIB_POWERPLAYTABLE
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
-
- UCHAR ucDataRevision;
-
- UCHAR ucNumStates;
- UCHAR ucStateEntrySize;
- UCHAR ucClockInfoSize;
- UCHAR ucNonClockSize;
-
- // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures
- USHORT usStateArrayOffset;
-
- // offset from start of this table to array of ASIC-specific structures,
- // currently ATOM_PPLIB_CLOCK_INFO.
- USHORT usClockInfoArrayOffset;
-
- // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO
- USHORT usNonClockInfoArrayOffset;
-
- USHORT usBackbiasTime; // in microseconds
- USHORT usVoltageTime; // in microseconds
- USHORT usTableSize; //the size of this structure, or the extended structure
-
- ULONG ulPlatformCaps; // See ATOM_PPLIB_CAPS_*
-
- ATOM_PPLIB_THERMALCONTROLLER sThermalController;
-
- USHORT usBootClockInfoOffset;
- USHORT usBootNonClockInfoOffset;
-
-} ATOM_PPLIB_POWERPLAYTABLE;
-
-typedef struct _ATOM_PPLIB_POWERPLAYTABLE2
-{
- ATOM_PPLIB_POWERPLAYTABLE basicTable;
- UCHAR ucNumCustomThermalPolicy;
- USHORT usCustomThermalPolicyArrayOffset;
-}ATOM_PPLIB_POWERPLAYTABLE2, *LPATOM_PPLIB_POWERPLAYTABLE2;
-
-typedef struct _ATOM_PPLIB_POWERPLAYTABLE3
-{
- ATOM_PPLIB_POWERPLAYTABLE2 basicTable2;
- USHORT usFormatID; // To be used ONLY by PPGen.
- USHORT usFanTableOffset;
- USHORT usExtendendedHeaderOffset;
-} ATOM_PPLIB_POWERPLAYTABLE3, *LPATOM_PPLIB_POWERPLAYTABLE3;
-
-typedef struct _ATOM_PPLIB_POWERPLAYTABLE4
-{
- ATOM_PPLIB_POWERPLAYTABLE3 basicTable3;
- ULONG ulGoldenPPID; // PPGen use only
- ULONG ulGoldenRevision; // PPGen use only
- USHORT usVddcDependencyOnSCLKOffset;
- USHORT usVddciDependencyOnMCLKOffset;
- USHORT usVddcDependencyOnMCLKOffset;
- USHORT usMaxClockVoltageOnDCOffset;
- USHORT usVddcPhaseShedLimitsTableOffset; // Points to ATOM_PPLIB_PhaseSheddingLimits_Table
- USHORT usMvddDependencyOnMCLKOffset;
-} ATOM_PPLIB_POWERPLAYTABLE4, *LPATOM_PPLIB_POWERPLAYTABLE4;
-
-typedef struct _ATOM_PPLIB_POWERPLAYTABLE5
-{
- ATOM_PPLIB_POWERPLAYTABLE4 basicTable4;
- ULONG ulTDPLimit;
- ULONG ulNearTDPLimit;
- ULONG ulSQRampingThreshold;
- USHORT usCACLeakageTableOffset; // Points to ATOM_PPLIB_CAC_Leakage_Table
- ULONG ulCACLeakage; // The iLeakage for driver calculated CAC leakage table
- USHORT usTDPODLimit;
- USHORT usLoadLineSlope; // in milliOhms * 100
-} ATOM_PPLIB_POWERPLAYTABLE5, *LPATOM_PPLIB_POWERPLAYTABLE5;
-
-//// ATOM_PPLIB_NONCLOCK_INFO::usClassification
-#define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007
-#define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0
-#define ATOM_PPLIB_CLASSIFICATION_UI_NONE 0
-#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1
-#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3
-#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5
-// 2, 4, 6, 7 are reserved
-
-#define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008
-#define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010
-#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020
-#define ATOM_PPLIB_CLASSIFICATION_REST 0x0040
-#define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080
-#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100
-#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200
-#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400
-#define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800
-#define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000
-#define ATOM_PPLIB_CLASSIFICATION_HD2STATE 0x2000
-#define ATOM_PPLIB_CLASSIFICATION_HDSTATE 0x4000
-#define ATOM_PPLIB_CLASSIFICATION_SDSTATE 0x8000
-
-//// ATOM_PPLIB_NONCLOCK_INFO::usClassification2
-#define ATOM_PPLIB_CLASSIFICATION2_LIMITEDPOWERSOURCE_2 0x0001
-#define ATOM_PPLIB_CLASSIFICATION2_ULV 0x0002
-#define ATOM_PPLIB_CLASSIFICATION2_MVC 0x0004 //Multi-View Codec (BD-3D)
-
-//// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings
-#define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001
-#define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002
-
-// 0 is 2.5Gb/s, 1 is 5Gb/s
-#define ATOM_PPLIB_PCIE_LINK_SPEED_MASK 0x00000004
-#define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT 2
-
-// lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec
-#define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK 0x000000F8
-#define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT 3
-
-// lookup into reduced refresh-rate table
-#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK 0x00000F00
-#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8
-
-#define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED 0
-#define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ 1
-// 2-15 TBD as needed.
-
-#define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000
-#define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000
-
-#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000
-
-#define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000
-
-//memory related flags
-#define ATOM_PPLIB_SWSTATE_MEMORY_DLL_OFF 0x000010000
-
-//M3 Arb //2bits, current 3 sets of parameters in total
-#define ATOM_PPLIB_M3ARB_MASK 0x00060000
-#define ATOM_PPLIB_M3ARB_SHIFT 17
-
-#define ATOM_PPLIB_ENABLE_DRR 0x00080000
-
-// remaining 16 bits are reserved
-typedef struct _ATOM_PPLIB_THERMAL_STATE
-{
- UCHAR ucMinTemperature;
- UCHAR ucMaxTemperature;
- UCHAR ucThermalAction;
-}ATOM_PPLIB_THERMAL_STATE, *LPATOM_PPLIB_THERMAL_STATE;
-
-// Contained in an array starting at the offset
-// in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset.
-// referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex
-#define ATOM_PPLIB_NONCLOCKINFO_VER1 12
-#define ATOM_PPLIB_NONCLOCKINFO_VER2 24
-typedef struct _ATOM_PPLIB_NONCLOCK_INFO
-{
- USHORT usClassification;
- UCHAR ucMinTemperature;
- UCHAR ucMaxTemperature;
- ULONG ulCapsAndSettings;
- UCHAR ucRequiredPower;
- USHORT usClassification2;
- ULONG ulVCLK;
- ULONG ulDCLK;
- UCHAR ucUnused[5];
-} ATOM_PPLIB_NONCLOCK_INFO;
-
-// Contained in an array starting at the offset
-// in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset.
-// referenced from ATOM_PPLIB_STATE::ucClockStateIndices
-typedef struct _ATOM_PPLIB_R600_CLOCK_INFO
-{
- USHORT usEngineClockLow;
- UCHAR ucEngineClockHigh;
-
- USHORT usMemoryClockLow;
- UCHAR ucMemoryClockHigh;
-
- USHORT usVDDC;
- USHORT usUnused1;
- USHORT usUnused2;
-
- ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_*
-
-} ATOM_PPLIB_R600_CLOCK_INFO;
-
-// ulFlags in ATOM_PPLIB_R600_CLOCK_INFO
-#define ATOM_PPLIB_R600_FLAGS_PCIEGEN2 1
-#define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2
-#define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4
-#define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8
-#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16
-#define ATOM_PPLIB_R600_FLAGS_LOWPOWER 32 // On the RV770 use 'low power' setting (sequencer S0).
-
-typedef struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO
-{
- USHORT usEngineClockLow;
- UCHAR ucEngineClockHigh;
-
- USHORT usMemoryClockLow;
- UCHAR ucMemoryClockHigh;
-
- USHORT usVDDC;
- USHORT usVDDCI;
- USHORT usUnused;
-
- ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_*
-
-} ATOM_PPLIB_EVERGREEN_CLOCK_INFO;
-
-typedef struct _ATOM_PPLIB_SI_CLOCK_INFO
-{
- USHORT usEngineClockLow;
- UCHAR ucEngineClockHigh;
-
- USHORT usMemoryClockLow;
- UCHAR ucMemoryClockHigh;
-
- USHORT usVDDC;
- USHORT usVDDCI;
- UCHAR ucPCIEGen;
- UCHAR ucUnused1;
-
- ULONG ulFlags; // ATOM_PPLIB_SI_FLAGS_*, no flag is necessary for now
-
-} ATOM_PPLIB_SI_CLOCK_INFO;
-
-typedef struct _ATOM_PPLIB_CI_CLOCK_INFO
-{
- USHORT usEngineClockLow;
- UCHAR ucEngineClockHigh;
-
- USHORT usMemoryClockLow;
- UCHAR ucMemoryClockHigh;
-
- UCHAR ucPCIEGen;
- USHORT usPCIELane;
-} ATOM_PPLIB_CI_CLOCK_INFO;
-
-typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO
-
-{
- USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600).
- UCHAR ucLowEngineClockHigh;
- USHORT usHighEngineClockLow; // High Engine clock in MHz.
- UCHAR ucHighEngineClockHigh;
- USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants.
- UCHAR ucMemoryClockHigh; // Currentyl unused.
- UCHAR ucPadding; // For proper alignment and size.
- USHORT usVDDC; // For the 780, use: None, Low, High, Variable
- UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16}
- UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement.
- USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200).
- ULONG ulFlags;
-} ATOM_PPLIB_RS780_CLOCK_INFO;
-
-#define ATOM_PPLIB_RS780_VOLTAGE_NONE 0
-#define ATOM_PPLIB_RS780_VOLTAGE_LOW 1
-#define ATOM_PPLIB_RS780_VOLTAGE_HIGH 2
-#define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE 3
-
-#define ATOM_PPLIB_RS780_SPMCLK_NONE 0 // We cannot change the side port memory clock, leave it as it is.
-#define ATOM_PPLIB_RS780_SPMCLK_LOW 1
-#define ATOM_PPLIB_RS780_SPMCLK_HIGH 2
-
-#define ATOM_PPLIB_RS780_HTLINKFREQ_NONE 0
-#define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1
-#define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2
-
-typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{
- USHORT usEngineClockLow; //clockfrequency & 0xFFFF. The unit is in 10khz
- UCHAR ucEngineClockHigh; //clockfrequency >> 16.
- UCHAR vddcIndex; //2-bit vddc index;
- USHORT tdpLimit;
- //please initalize to 0
- USHORT rsv1;
- //please initialize to 0s
- ULONG rsv2[2];
-}ATOM_PPLIB_SUMO_CLOCK_INFO;
-
-
-
-typedef struct _ATOM_PPLIB_STATE_V2
-{
- //number of valid dpm levels in this state; Driver uses it to calculate the whole
- //size of the state: sizeof(ATOM_PPLIB_STATE_V2) + (ucNumDPMLevels - 1) * sizeof(UCHAR)
- UCHAR ucNumDPMLevels;
-
- //a index to the array of nonClockInfos
- UCHAR nonClockInfoIndex;
- /**
- * Driver will read the first ucNumDPMLevels in this array
- */
- UCHAR clockInfoIndex[1];
-} ATOM_PPLIB_STATE_V2;
-
-typedef struct _StateArray{
- //how many states we have
- UCHAR ucNumEntries;
-
- ATOM_PPLIB_STATE_V2 states[1];
-}StateArray;
-
-
-typedef struct _ClockInfoArray{
- //how many clock levels we have
- UCHAR ucNumEntries;
-
- //sizeof(ATOM_PPLIB_CLOCK_INFO)
- UCHAR ucEntrySize;
-
- UCHAR clockInfo[1];
-}ClockInfoArray;
-
-typedef struct _NonClockInfoArray{
-
- //how many non-clock levels we have. normally should be same as number of states
- UCHAR ucNumEntries;
- //sizeof(ATOM_PPLIB_NONCLOCK_INFO)
- UCHAR ucEntrySize;
-
- ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[1];
-}NonClockInfoArray;
-
-typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record
-{
- USHORT usClockLow;
- UCHAR ucClockHigh;
- USHORT usVoltage;
-}ATOM_PPLIB_Clock_Voltage_Dependency_Record;
-
-typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Table
-{
- UCHAR ucNumEntries; // Number of entries.
- ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[1]; // Dynamically allocate entries.
-}ATOM_PPLIB_Clock_Voltage_Dependency_Table;
-
-typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record
-{
- USHORT usSclkLow;
- UCHAR ucSclkHigh;
- USHORT usMclkLow;
- UCHAR ucMclkHigh;
- USHORT usVddc;
- USHORT usVddci;
-}ATOM_PPLIB_Clock_Voltage_Limit_Record;
-
-typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table
-{
- UCHAR ucNumEntries; // Number of entries.
- ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1]; // Dynamically allocate entries.
-}ATOM_PPLIB_Clock_Voltage_Limit_Table;
-
-typedef struct _ATOM_PPLIB_CAC_Leakage_Record
-{
- USHORT usVddc; // We use this field for the "fake" standardized VDDC for power calculations; For CI and newer, we use this as the real VDDC value.
- ULONG ulLeakageValue; // For CI and newer we use this as the "fake" standar VDDC value.
-}ATOM_PPLIB_CAC_Leakage_Record;
-
-typedef struct _ATOM_PPLIB_CAC_Leakage_Table
-{
- UCHAR ucNumEntries; // Number of entries.
- ATOM_PPLIB_CAC_Leakage_Record entries[1]; // Dynamically allocate entries.
-}ATOM_PPLIB_CAC_Leakage_Table;
-
-typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Record
-{
- USHORT usVoltage;
- USHORT usSclkLow;
- UCHAR ucSclkHigh;
- USHORT usMclkLow;
- UCHAR ucMclkHigh;
-}ATOM_PPLIB_PhaseSheddingLimits_Record;
-
-typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Table
-{
- UCHAR ucNumEntries; // Number of entries.
- ATOM_PPLIB_PhaseSheddingLimits_Record entries[1]; // Dynamically allocate entries.
-}ATOM_PPLIB_PhaseSheddingLimits_Table;
-
-typedef struct _VCEClockInfo{
- USHORT usEVClkLow;
- UCHAR ucEVClkHigh;
- USHORT usECClkLow;
- UCHAR ucECClkHigh;
-}VCEClockInfo;
-
-typedef struct _VCEClockInfoArray{
- UCHAR ucNumEntries;
- VCEClockInfo entries[1];
-}VCEClockInfoArray;
-
-typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record
-{
- USHORT usVoltage;
- UCHAR ucVCEClockInfoIndex;
-}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record;
-
-typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table
-{
- UCHAR numEntries;
- ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record entries[1];
-}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table;
-
-typedef struct _ATOM_PPLIB_VCE_State_Record
-{
- UCHAR ucVCEClockInfoIndex;
- UCHAR ucClockInfoIndex; //highest 2 bits indicates memory p-states, lower 6bits indicates index to ClockInfoArrary
-}ATOM_PPLIB_VCE_State_Record;
-
-typedef struct _ATOM_PPLIB_VCE_State_Table
-{
- UCHAR numEntries;
- ATOM_PPLIB_VCE_State_Record entries[1];
-}ATOM_PPLIB_VCE_State_Table;
-
-
-typedef struct _ATOM_PPLIB_VCE_Table
-{
- UCHAR revid;
-// VCEClockInfoArray array;
-// ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table limits;
-// ATOM_PPLIB_VCE_State_Table states;
-}ATOM_PPLIB_VCE_Table;
-
-
-typedef struct _UVDClockInfo{
- USHORT usVClkLow;
- UCHAR ucVClkHigh;
- USHORT usDClkLow;
- UCHAR ucDClkHigh;
-}UVDClockInfo;
-
-typedef struct _UVDClockInfoArray{
- UCHAR ucNumEntries;
- UVDClockInfo entries[1];
-}UVDClockInfoArray;
-
-typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record
-{
- USHORT usVoltage;
- UCHAR ucUVDClockInfoIndex;
-}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record;
-
-typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table
-{
- UCHAR numEntries;
- ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record entries[1];
-}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table;
-
-typedef struct _ATOM_PPLIB_UVD_State_Record
-{
- UCHAR ucUVDClockInfoIndex;
- UCHAR ucClockInfoIndex; //highest 2 bits indicates memory p-states, lower 6bits indicates index to ClockInfoArrary
-}ATOM_PPLIB_UVD_State_Record;
-
-typedef struct _ATOM_PPLIB_UVD_State_Table
-{
- UCHAR numEntries;
- ATOM_PPLIB_UVD_State_Record entries[1];
-}ATOM_PPLIB_UVD_State_Table;
-
-
-typedef struct _ATOM_PPLIB_UVD_Table
-{
- UCHAR revid;
-// UVDClockInfoArray array;
-// ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table limits;
-// ATOM_PPLIB_UVD_State_Table states;
-}ATOM_PPLIB_UVD_Table;
-
-
-typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Record
-{
- USHORT usVoltage;
- USHORT usSAMClockLow;
- UCHAR ucSAMClockHigh;
-}ATOM_PPLIB_SAMClk_Voltage_Limit_Record;
-
-typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Table{
- UCHAR numEntries;
- ATOM_PPLIB_SAMClk_Voltage_Limit_Record entries[1];
-}ATOM_PPLIB_SAMClk_Voltage_Limit_Table;
-
-typedef struct _ATOM_PPLIB_SAMU_Table
-{
- UCHAR revid;
- ATOM_PPLIB_SAMClk_Voltage_Limit_Table limits;
-}ATOM_PPLIB_SAMU_Table;
-
-#define ATOM_PPM_A_A 1
-#define ATOM_PPM_A_I 2
-typedef struct _ATOM_PPLIB_PPM_Table
-{
- UCHAR ucRevId;
- UCHAR ucPpmDesign; //A+I or A+A
- USHORT usCpuCoreNumber;
- ULONG ulPlatformTDP;
- ULONG ulSmallACPlatformTDP;
- ULONG ulPlatformTDC;
- ULONG ulSmallACPlatformTDC;
- ULONG ulApuTDP;
- ULONG ulDGpuTDP;
- ULONG ulDGpuUlvPower;
- ULONG ulTjmax;
-} ATOM_PPLIB_PPM_Table;
-
-/**************************************************************************/
-
// Following definitions are for compatibility issue in different SW components.
#define ATOM_MASTER_DATA_TABLE_REVISION 0x01
@@ -8485,3 +7873,6 @@ typedef struct {
#endif /* _ATOMBIOS_H */
+
+#include "pptable.h"
+
diff --git a/drivers/gpu/drm/radeon/pptable.h b/drivers/gpu/drm/radeon/pptable.h
new file mode 100644
index 0000000..da43ab3
--- /dev/null
+++ b/drivers/gpu/drm/radeon/pptable.h
@@ -0,0 +1,682 @@
+/*
+ * Copyright 2013 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _PPTABLE_H
+#define _PPTABLE_H
+
+#pragma pack(push, 1)
+
+typedef struct _ATOM_PPLIB_THERMALCONTROLLER
+
+{
+ UCHAR ucType; // one of ATOM_PP_THERMALCONTROLLER_*
+ UCHAR ucI2cLine; // as interpreted by DAL I2C
+ UCHAR ucI2cAddress;
+ UCHAR ucFanParameters; // Fan Control Parameters.
+ UCHAR ucFanMinRPM; // Fan Minimum RPM (hundreds) -- for display purposes only.
+ UCHAR ucFanMaxRPM; // Fan Maximum RPM (hundreds) -- for display purposes only.
+ UCHAR ucReserved; // ----
+ UCHAR ucFlags; // to be defined
+} ATOM_PPLIB_THERMALCONTROLLER;
+
+#define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f
+#define ATOM_PP_FANPARAMETERS_NOFAN 0x80 // No fan is connected to this controller.
+
+#define ATOM_PP_THERMALCONTROLLER_NONE 0
+#define ATOM_PP_THERMALCONTROLLER_LM63 1 // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_ADM1032 2 // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_ADM1030 3 // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_MUA6649 4 // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_LM64 5
+#define ATOM_PP_THERMALCONTROLLER_F75375 6 // Not used by PPLib
+#define ATOM_PP_THERMALCONTROLLER_RV6xx 7
+#define ATOM_PP_THERMALCONTROLLER_RV770 8
+#define ATOM_PP_THERMALCONTROLLER_ADT7473 9
+#define ATOM_PP_THERMALCONTROLLER_KONG 10
+#define ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO 11
+#define ATOM_PP_THERMALCONTROLLER_EVERGREEN 12
+#define ATOM_PP_THERMALCONTROLLER_EMC2103 13 /* 0x0D */ // Only fan control will be implemented, do NOT show this in PPGen.
+#define ATOM_PP_THERMALCONTROLLER_SUMO 14 /* 0x0E */ // Sumo type, used internally
+#define ATOM_PP_THERMALCONTROLLER_NISLANDS 15
+#define ATOM_PP_THERMALCONTROLLER_SISLANDS 16
+#define ATOM_PP_THERMALCONTROLLER_LM96163 17
+#define ATOM_PP_THERMALCONTROLLER_CISLANDS 18
+#define ATOM_PP_THERMALCONTROLLER_KAVERI 19
+
+
+// Thermal controller 'combo type' to use an external controller for Fan control and an internal controller for thermal.
+// We probably should reserve the bit 0x80 for this use.
+// To keep the number of these types low we should also use the same code for all ASICs (i.e. do not distinguish RV6xx and RV7xx Internal here).
+// The driver can pick the correct internal controller based on the ASIC.
+
+#define ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL 0x89 // ADT7473 Fan Control + Internal Thermal Controller
+#define ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL 0x8D // EMC2103 Fan Control + Internal Thermal Controller
+
+typedef struct _ATOM_PPLIB_STATE
+{
+ UCHAR ucNonClockStateIndex;
+ UCHAR ucClockStateIndices[1]; // variable-sized
+} ATOM_PPLIB_STATE;
+
+
+typedef struct _ATOM_PPLIB_FANTABLE
+{
+ UCHAR ucFanTableFormat; // Change this if the table format changes or version changes so that the other fields are not the same.
+ UCHAR ucTHyst; // Temperature hysteresis. Integer.
+ USHORT usTMin; // The temperature, in 0.01 centigrades, below which we just run at a minimal PWM.
+ USHORT usTMed; // The middle temperature where we change slopes.
+ USHORT usTHigh; // The high point above TMed for adjusting the second slope.
+ USHORT usPWMMin; // The minimum PWM value in percent (0.01% increments).
+ USHORT usPWMMed; // The PWM value (in percent) at TMed.
+ USHORT usPWMHigh; // The PWM value at THigh.
+} ATOM_PPLIB_FANTABLE;
+
+typedef struct _ATOM_PPLIB_FANTABLE2
+{
+ ATOM_PPLIB_FANTABLE basicTable;
+ USHORT usTMax; // The max temperature
+} ATOM_PPLIB_FANTABLE2;
+
+typedef struct _ATOM_PPLIB_EXTENDEDHEADER
+{
+ USHORT usSize;
+ ULONG ulMaxEngineClock; // For Overdrive.
+ ULONG ulMaxMemoryClock; // For Overdrive.
+ // Add extra system parameters here, always adjust size to include all fields.
+ USHORT usVCETableOffset; //points to ATOM_PPLIB_VCE_Table
+ USHORT usUVDTableOffset; //points to ATOM_PPLIB_UVD_Table
+ USHORT usSAMUTableOffset; //points to ATOM_PPLIB_SAMU_Table
+ USHORT usPPMTableOffset; //points to ATOM_PPLIB_PPM_Table
+ USHORT usACPTableOffset; //points to ATOM_PPLIB_ACP_Table
+ USHORT usPowerTuneTableOffset; //points to ATOM_PPLIB_POWERTUNE_Table
+} ATOM_PPLIB_EXTENDEDHEADER;
+
+//// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps
+#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1
+#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2
+#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4
+#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8
+#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16
+#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32
+#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64
+#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128
+#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256
+#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512
+#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024
+#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048
+#define ATOM_PP_PLATFORM_CAP_MVDDCONTROL 4096
+#define ATOM_PP_PLATFORM_CAP_GOTO_BOOT_ON_ALERT 0x2000 // Go to boot state on alerts, e.g. on an AC->DC transition.
+#define ATOM_PP_PLATFORM_CAP_DONT_WAIT_FOR_VBLANK_ON_ALERT 0x4000 // Do NOT wait for VBLANK during an alert (e.g. AC->DC transition).
+#define ATOM_PP_PLATFORM_CAP_VDDCI_CONTROL 0x8000 // Does the driver control VDDCI independently from VDDC.
+#define ATOM_PP_PLATFORM_CAP_REGULATOR_HOT 0x00010000 // Enable the 'regulator hot' feature.
+#define ATOM_PP_PLATFORM_CAP_BACO 0x00020000 // Does the driver supports BACO state.
+#define ATOM_PP_PLATFORM_CAP_NEW_CAC_VOLTAGE 0x00040000 // Does the driver supports new CAC voltage table.
+#define ATOM_PP_PLATFORM_CAP_REVERT_GPIO5_POLARITY 0x00080000 // Does the driver supports revert GPIO5 polarity.
+#define ATOM_PP_PLATFORM_CAP_OUTPUT_THERMAL2GPIO17 0x00100000 // Does the driver supports thermal2GPIO17.
+#define ATOM_PP_PLATFORM_CAP_VRHOT_GPIO_CONFIGURABLE 0x00200000 // Does the driver supports VR HOT GPIO Configurable.
+#define ATOM_PP_PLATFORM_CAP_TEMP_INVERSION 0x00400000 // Does the driver supports Temp Inversion feature.
+#define ATOM_PP_PLATFORM_CAP_EVV 0x00800000
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+
+ UCHAR ucDataRevision;
+
+ UCHAR ucNumStates;
+ UCHAR ucStateEntrySize;
+ UCHAR ucClockInfoSize;
+ UCHAR ucNonClockSize;
+
+ // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures
+ USHORT usStateArrayOffset;
+
+ // offset from start of this table to array of ASIC-specific structures,
+ // currently ATOM_PPLIB_CLOCK_INFO.
+ USHORT usClockInfoArrayOffset;
+
+ // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO
+ USHORT usNonClockInfoArrayOffset;
+
+ USHORT usBackbiasTime; // in microseconds
+ USHORT usVoltageTime; // in microseconds
+ USHORT usTableSize; //the size of this structure, or the extended structure
+
+ ULONG ulPlatformCaps; // See ATOM_PPLIB_CAPS_*
+
+ ATOM_PPLIB_THERMALCONTROLLER sThermalController;
+
+ USHORT usBootClockInfoOffset;
+ USHORT usBootNonClockInfoOffset;
+
+} ATOM_PPLIB_POWERPLAYTABLE;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE2
+{
+ ATOM_PPLIB_POWERPLAYTABLE basicTable;
+ UCHAR ucNumCustomThermalPolicy;
+ USHORT usCustomThermalPolicyArrayOffset;
+}ATOM_PPLIB_POWERPLAYTABLE2, *LPATOM_PPLIB_POWERPLAYTABLE2;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE3
+{
+ ATOM_PPLIB_POWERPLAYTABLE2 basicTable2;
+ USHORT usFormatID; // To be used ONLY by PPGen.
+ USHORT usFanTableOffset;
+ USHORT usExtendendedHeaderOffset;
+} ATOM_PPLIB_POWERPLAYTABLE3, *LPATOM_PPLIB_POWERPLAYTABLE3;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE4
+{
+ ATOM_PPLIB_POWERPLAYTABLE3 basicTable3;
+ ULONG ulGoldenPPID; // PPGen use only
+ ULONG ulGoldenRevision; // PPGen use only
+ USHORT usVddcDependencyOnSCLKOffset;
+ USHORT usVddciDependencyOnMCLKOffset;
+ USHORT usVddcDependencyOnMCLKOffset;
+ USHORT usMaxClockVoltageOnDCOffset;
+ USHORT usVddcPhaseShedLimitsTableOffset; // Points to ATOM_PPLIB_PhaseSheddingLimits_Table
+ USHORT usMvddDependencyOnMCLKOffset;
+} ATOM_PPLIB_POWERPLAYTABLE4, *LPATOM_PPLIB_POWERPLAYTABLE4;
+
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE5
+{
+ ATOM_PPLIB_POWERPLAYTABLE4 basicTable4;
+ ULONG ulTDPLimit;
+ ULONG ulNearTDPLimit;
+ ULONG ulSQRampingThreshold;
+ USHORT usCACLeakageTableOffset; // Points to ATOM_PPLIB_CAC_Leakage_Table
+ ULONG ulCACLeakage; // The iLeakage for driver calculated CAC leakage table
+ USHORT usTDPODLimit;
+ USHORT usLoadLineSlope; // in milliOhms * 100
+} ATOM_PPLIB_POWERPLAYTABLE5, *LPATOM_PPLIB_POWERPLAYTABLE5;
+
+//// ATOM_PPLIB_NONCLOCK_INFO::usClassification
+#define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007
+#define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0
+#define ATOM_PPLIB_CLASSIFICATION_UI_NONE 0
+#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1
+#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3
+#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5
+// 2, 4, 6, 7 are reserved
+
+#define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008
+#define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010
+#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020
+#define ATOM_PPLIB_CLASSIFICATION_REST 0x0040
+#define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080
+#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100
+#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200
+#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400
+#define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800
+#define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000
+#define ATOM_PPLIB_CLASSIFICATION_HD2STATE 0x2000
+#define ATOM_PPLIB_CLASSIFICATION_HDSTATE 0x4000
+#define ATOM_PPLIB_CLASSIFICATION_SDSTATE 0x8000
+
+//// ATOM_PPLIB_NONCLOCK_INFO::usClassification2
+#define ATOM_PPLIB_CLASSIFICATION2_LIMITEDPOWERSOURCE_2 0x0001
+#define ATOM_PPLIB_CLASSIFICATION2_ULV 0x0002
+#define ATOM_PPLIB_CLASSIFICATION2_MVC 0x0004 //Multi-View Codec (BD-3D)
+
+//// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings
+#define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001
+#define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002
+
+// 0 is 2.5Gb/s, 1 is 5Gb/s
+#define ATOM_PPLIB_PCIE_LINK_SPEED_MASK 0x00000004
+#define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT 2
+
+// lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec
+#define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK 0x000000F8
+#define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT 3
+
+// lookup into reduced refresh-rate table
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK 0x00000F00
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8
+
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED 0
+#define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ 1
+// 2-15 TBD as needed.
+
+#define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000
+#define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000
+
+#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000
+
+#define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000
+
+//memory related flags
+#define ATOM_PPLIB_SWSTATE_MEMORY_DLL_OFF 0x000010000
+
+//M3 Arb //2bits, current 3 sets of parameters in total
+#define ATOM_PPLIB_M3ARB_MASK 0x00060000
+#define ATOM_PPLIB_M3ARB_SHIFT 17
+
+#define ATOM_PPLIB_ENABLE_DRR 0x00080000
+
+// remaining 16 bits are reserved
+typedef struct _ATOM_PPLIB_THERMAL_STATE
+{
+ UCHAR ucMinTemperature;
+ UCHAR ucMaxTemperature;
+ UCHAR ucThermalAction;
+}ATOM_PPLIB_THERMAL_STATE, *LPATOM_PPLIB_THERMAL_STATE;
+
+// Contained in an array starting at the offset
+// in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset.
+// referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex
+#define ATOM_PPLIB_NONCLOCKINFO_VER1 12
+#define ATOM_PPLIB_NONCLOCKINFO_VER2 24
+typedef struct _ATOM_PPLIB_NONCLOCK_INFO
+{
+ USHORT usClassification;
+ UCHAR ucMinTemperature;
+ UCHAR ucMaxTemperature;
+ ULONG ulCapsAndSettings;
+ UCHAR ucRequiredPower;
+ USHORT usClassification2;
+ ULONG ulVCLK;
+ ULONG ulDCLK;
+ UCHAR ucUnused[5];
+} ATOM_PPLIB_NONCLOCK_INFO;
+
+// Contained in an array starting at the offset
+// in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset.
+// referenced from ATOM_PPLIB_STATE::ucClockStateIndices
+typedef struct _ATOM_PPLIB_R600_CLOCK_INFO
+{
+ USHORT usEngineClockLow;
+ UCHAR ucEngineClockHigh;
+
+ USHORT usMemoryClockLow;
+ UCHAR ucMemoryClockHigh;
+
+ USHORT usVDDC;
+ USHORT usUnused1;
+ USHORT usUnused2;
+
+ ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_*
+
+} ATOM_PPLIB_R600_CLOCK_INFO;
+
+// ulFlags in ATOM_PPLIB_R600_CLOCK_INFO
+#define ATOM_PPLIB_R600_FLAGS_PCIEGEN2 1
+#define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2
+#define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4
+#define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8
+#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16
+#define ATOM_PPLIB_R600_FLAGS_LOWPOWER 32 // On the RV770 use 'low power' setting (sequencer S0).
+
+typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO
+
+{
+ USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600).
+ UCHAR ucLowEngineClockHigh;
+ USHORT usHighEngineClockLow; // High Engine clock in MHz.
+ UCHAR ucHighEngineClockHigh;
+ USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants.
+ UCHAR ucMemoryClockHigh; // Currentyl unused.
+ UCHAR ucPadding; // For proper alignment and size.
+ USHORT usVDDC; // For the 780, use: None, Low, High, Variable
+ UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16}
+ UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could
+ USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200).
+ ULONG ulFlags;
+} ATOM_PPLIB_RS780_CLOCK_INFO;
+
+#define ATOM_PPLIB_RS780_VOLTAGE_NONE 0
+#define ATOM_PPLIB_RS780_VOLTAGE_LOW 1
+#define ATOM_PPLIB_RS780_VOLTAGE_HIGH 2
+#define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE 3
+
+#define ATOM_PPLIB_RS780_SPMCLK_NONE 0 // We cannot change the side port memory clock, leave it as it is.
+#define ATOM_PPLIB_RS780_SPMCLK_LOW 1
+#define ATOM_PPLIB_RS780_SPMCLK_HIGH 2
+
+#define ATOM_PPLIB_RS780_HTLINKFREQ_NONE 0
+#define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1
+#define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2
+
+typedef struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO
+{
+ USHORT usEngineClockLow;
+ UCHAR ucEngineClockHigh;
+
+ USHORT usMemoryClockLow;
+ UCHAR ucMemoryClockHigh;
+
+ USHORT usVDDC;
+ USHORT usVDDCI;
+ USHORT usUnused;
+
+ ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_*
+
+} ATOM_PPLIB_EVERGREEN_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_SI_CLOCK_INFO
+{
+ USHORT usEngineClockLow;
+ UCHAR ucEngineClockHigh;
+
+ USHORT usMemoryClockLow;
+ UCHAR ucMemoryClockHigh;
+
+ USHORT usVDDC;
+ USHORT usVDDCI;
+ UCHAR ucPCIEGen;
+ UCHAR ucUnused1;
+
+ ULONG ulFlags; // ATOM_PPLIB_SI_FLAGS_*, no flag is necessary for now
+
+} ATOM_PPLIB_SI_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_CI_CLOCK_INFO
+{
+ USHORT usEngineClockLow;
+ UCHAR ucEngineClockHigh;
+
+ USHORT usMemoryClockLow;
+ UCHAR ucMemoryClockHigh;
+
+ UCHAR ucPCIEGen;
+ USHORT usPCIELane;
+} ATOM_PPLIB_CI_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{
+ USHORT usEngineClockLow; //clockfrequency & 0xFFFF. The unit is in 10khz
+ UCHAR ucEngineClockHigh; //clockfrequency >> 16.
+ UCHAR vddcIndex; //2-bit vddc index;
+ USHORT tdpLimit;
+ //please initalize to 0
+ USHORT rsv1;
+ //please initialize to 0s
+ ULONG rsv2[2];
+}ATOM_PPLIB_SUMO_CLOCK_INFO;
+
+typedef struct _ATOM_PPLIB_STATE_V2
+{
+ //number of valid dpm levels in this state; Driver uses it to calculate the whole
+ //size of the state: sizeof(ATOM_PPLIB_STATE_V2) + (ucNumDPMLevels - 1) * sizeof(UCHAR)
+ UCHAR ucNumDPMLevels;
+
+ //a index to the array of nonClockInfos
+ UCHAR nonClockInfoIndex;
+ /**
+ * Driver will read the first ucNumDPMLevels in this array
+ */
+ UCHAR clockInfoIndex[1];
+} ATOM_PPLIB_STATE_V2;
+
+typedef struct _StateArray{
+ //how many states we have
+ UCHAR ucNumEntries;
+
+ ATOM_PPLIB_STATE_V2 states[1];
+}StateArray;
+
+
+typedef struct _ClockInfoArray{
+ //how many clock levels we have
+ UCHAR ucNumEntries;
+
+ //sizeof(ATOM_PPLIB_CLOCK_INFO)
+ UCHAR ucEntrySize;
+
+ UCHAR clockInfo[1];
+}ClockInfoArray;
+
+typedef struct _NonClockInfoArray{
+
+ //how many non-clock levels we have. normally should be same as number of states
+ UCHAR ucNumEntries;
+ //sizeof(ATOM_PPLIB_NONCLOCK_INFO)
+ UCHAR ucEntrySize;
+
+ ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[1];
+}NonClockInfoArray;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record
+{
+ USHORT usClockLow;
+ UCHAR ucClockHigh;
+ USHORT usVoltage;
+}ATOM_PPLIB_Clock_Voltage_Dependency_Record;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Table
+{
+ UCHAR ucNumEntries; // Number of entries.
+ ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[1]; // Dynamically allocate entries.
+}ATOM_PPLIB_Clock_Voltage_Dependency_Table;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record
+{
+ USHORT usSclkLow;
+ UCHAR ucSclkHigh;
+ USHORT usMclkLow;
+ UCHAR ucMclkHigh;
+ USHORT usVddc;
+ USHORT usVddci;
+}ATOM_PPLIB_Clock_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table
+{
+ UCHAR ucNumEntries; // Number of entries.
+ ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1]; // Dynamically allocate entries.
+}ATOM_PPLIB_Clock_Voltage_Limit_Table;
+
+union _ATOM_PPLIB_CAC_Leakage_Record
+{
+ struct
+ {
+ USHORT usVddc; // We use this field for the "fake" standardized VDDC for power calculations; For CI and newer, we use this as the real VDDC value. in CI we read it as StdVoltageHiSidd
+ ULONG ulLeakageValue; // For CI and newer we use this as the "fake" standar VDDC value. in CI we read it as StdVoltageLoSidd
+
+ };
+ struct
+ {
+ USHORT usVddc1;
+ USHORT usVddc2;
+ USHORT usVddc3;
+ };
+};
+
+typedef union _ATOM_PPLIB_CAC_Leakage_Record ATOM_PPLIB_CAC_Leakage_Record;
+
+typedef struct _ATOM_PPLIB_CAC_Leakage_Table
+{
+ UCHAR ucNumEntries; // Number of entries.
+ ATOM_PPLIB_CAC_Leakage_Record entries[1]; // Dynamically allocate entries.
+}ATOM_PPLIB_CAC_Leakage_Table;
+
+typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Record
+{
+ USHORT usVoltage;
+ USHORT usSclkLow;
+ UCHAR ucSclkHigh;
+ USHORT usMclkLow;
+ UCHAR ucMclkHigh;
+}ATOM_PPLIB_PhaseSheddingLimits_Record;
+
+typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Table
+{
+ UCHAR ucNumEntries; // Number of entries.
+ ATOM_PPLIB_PhaseSheddingLimits_Record entries[1]; // Dynamically allocate entries.
+}ATOM_PPLIB_PhaseSheddingLimits_Table;
+
+typedef struct _VCEClockInfo{
+ USHORT usEVClkLow;
+ UCHAR ucEVClkHigh;
+ USHORT usECClkLow;
+ UCHAR ucECClkHigh;
+}VCEClockInfo;
+
+typedef struct _VCEClockInfoArray{
+ UCHAR ucNumEntries;
+ VCEClockInfo entries[1];
+}VCEClockInfoArray;
+
+typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record
+{
+ USHORT usVoltage;
+ UCHAR ucVCEClockInfoIndex;
+}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table
+{
+ UCHAR numEntries;
+ ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_VCE_State_Record
+{
+ UCHAR ucVCEClockInfoIndex;
+ UCHAR ucClockInfoIndex; //highest 2 bits indicates memory p-states, lower 6bits indicates index to ClockInfoArrary
+}ATOM_PPLIB_VCE_State_Record;
+
+typedef struct _ATOM_PPLIB_VCE_State_Table
+{
+ UCHAR numEntries;
+ ATOM_PPLIB_VCE_State_Record entries[1];
+}ATOM_PPLIB_VCE_State_Table;
+
+
+typedef struct _ATOM_PPLIB_VCE_Table
+{
+ UCHAR revid;
+// VCEClockInfoArray array;
+// ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table limits;
+// ATOM_PPLIB_VCE_State_Table states;
+}ATOM_PPLIB_VCE_Table;
+
+
+typedef struct _UVDClockInfo{
+ USHORT usVClkLow;
+ UCHAR ucVClkHigh;
+ USHORT usDClkLow;
+ UCHAR ucDClkHigh;
+}UVDClockInfo;
+
+typedef struct _UVDClockInfoArray{
+ UCHAR ucNumEntries;
+ UVDClockInfo entries[1];
+}UVDClockInfoArray;
+
+typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record
+{
+ USHORT usVoltage;
+ UCHAR ucUVDClockInfoIndex;
+}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table
+{
+ UCHAR numEntries;
+ ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_UVD_Table
+{
+ UCHAR revid;
+// UVDClockInfoArray array;
+// ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table limits;
+}ATOM_PPLIB_UVD_Table;
+
+typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Record
+{
+ USHORT usVoltage;
+ USHORT usSAMClockLow;
+ UCHAR ucSAMClockHigh;
+}ATOM_PPLIB_SAMClk_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Table{
+ UCHAR numEntries;
+ ATOM_PPLIB_SAMClk_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_SAMClk_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_SAMU_Table
+{
+ UCHAR revid;
+ ATOM_PPLIB_SAMClk_Voltage_Limit_Table limits;
+}ATOM_PPLIB_SAMU_Table;
+
+typedef struct _ATOM_PPLIB_ACPClk_Voltage_Limit_Record
+{
+ USHORT usVoltage;
+ USHORT usACPClockLow;
+ UCHAR ucACPClockHigh;
+}ATOM_PPLIB_ACPClk_Voltage_Limit_Record;
+
+typedef struct _ATOM_PPLIB_ACPClk_Voltage_Limit_Table{
+ UCHAR numEntries;
+ ATOM_PPLIB_ACPClk_Voltage_Limit_Record entries[1];
+}ATOM_PPLIB_ACPClk_Voltage_Limit_Table;
+
+typedef struct _ATOM_PPLIB_ACP_Table
+{
+ UCHAR revid;
+ ATOM_PPLIB_ACPClk_Voltage_Limit_Table limits;
+}ATOM_PPLIB_ACP_Table;
+
+typedef struct _ATOM_PowerTune_Table{
+ USHORT usTDP;
+ USHORT usConfigurableTDP;
+ USHORT usTDC;
+ USHORT usBatteryPowerLimit;
+ USHORT usSmallPowerLimit;
+ USHORT usLowCACLeakage;
+ USHORT usHighCACLeakage;
+}ATOM_PowerTune_Table;
+
+typedef struct _ATOM_PPLIB_POWERTUNE_Table
+{
+ UCHAR revid;
+ ATOM_PowerTune_Table power_tune_table;
+}ATOM_PPLIB_POWERTUNE_Table;
+
+typedef struct _ATOM_PPLIB_POWERTUNE_Table_V1
+{
+ UCHAR revid;
+ ATOM_PowerTune_Table power_tune_table;
+ USHORT usMaximumPowerDeliveryLimit;
+ USHORT usReserve[7];
+} ATOM_PPLIB_POWERTUNE_Table_V1;
+
+#define ATOM_PPM_A_A 1
+#define ATOM_PPM_A_I 2
+typedef struct _ATOM_PPLIB_PPM_Table
+{
+ UCHAR ucRevId;
+ UCHAR ucPpmDesign; //A+I or A+A
+ USHORT usCpuCoreNumber;
+ ULONG ulPlatformTDP;
+ ULONG ulSmallACPlatformTDP;
+ ULONG ulPlatformTDC;
+ ULONG ulSmallACPlatformTDC;
+ ULONG ulApuTDP;
+ ULONG ulDGpuTDP;
+ ULONG ulDGpuUlvPower;
+ ULONG ulTjmax;
+} ATOM_PPLIB_PPM_Table;
+
+#pragma pack(pop)
+
+#endif
--
1.8.3.1
More information about the dri-devel
mailing list