[PATCH 6/6] drm/radeon: set speaker allocation for DCE3.2

[Alex Deucher]

This updates the audio driver to the speaker allocation
block from the EDID.  A similar change was just implemented
for DCE4-8.

Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
 drivers/gpu/drm/radeon/r600_hdmi.c | 42 ++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/radeon/r600d.h     |  7 +++++++
 2 files changed, 49 insertions(+)

diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index e1dec13..6d7128d 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -283,6 +283,45 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 	}
 }
 
+static void dce3_2_afmt_write_speaker_allocation(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector = NULL;
+	u32 tmp;
+	u8 *sadb;
+	int sad_count;
+
+	list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) {
+		if (connector->encoder == encoder)
+			radeon_connector = to_radeon_connector(connector);
+	}
+
+	if (!radeon_connector) {
+		DRM_ERROR("Couldn't find encoder's connector\n");
+		return;
+	}
+
+	sad_count = drm_edid_to_speaker_allocation(radeon_connector->edid, &sadb);
+	if (sad_count < 0) {
+		DRM_ERROR("Couldn't read Speaker Allocation Data Block: %d\n", sad_count);
+		return;
+	}
+
+	/* program the speaker allocation */
+	tmp = RREG32(AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER);
+	tmp &= ~(DP_CONNECTION | SPEAKER_ALLOCATION_MASK);
+	/* set HDMI mode */
+	tmp |= HDMI_CONNECTION;
+	if (sad_count)
+		tmp |= SPEAKER_ALLOCATION(sadb[0]);
+	else
+		tmp |= SPEAKER_ALLOCATION(5); /* stereo */
+	WREG32(AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER, tmp);
+
+	kfree(sadb);
+}
+
 /*
  * update the info frames with the data from the current display mode
  */
@@ -327,6 +366,9 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
 		       HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
 	}
 
+	if (ASIC_IS_DCE32(rdev))
+		dce3_2_afmt_write_speaker_allocation(encoder);
+
 	WREG32(HDMI0_ACR_PACKET_CONTROL + offset,
 	       HDMI0_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */
 	       HDMI0_ACR_SOURCE); /* select SW CTS value */
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 7c78083..44ec7a1 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -960,6 +960,13 @@
 #       define DIG_MODE_SDVO             4
 #define DIG1_CNTL                        0x79a0
 
+#define AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER          0x71bc
+#define		SPEAKER_ALLOCATION(x)			(((x) & 0x7f) << 0)
+#define		SPEAKER_ALLOCATION_MASK			(0x7f << 0)
+#define		SPEAKER_ALLOCATION_SHIFT		0
+#define		HDMI_CONNECTION				(1 << 16)
+#define		DP_CONNECTION				(1 << 17)
+
 /* rs6xx/rs740 and r6xx share the same HDMI blocks, however, rs6xx has only one
  * instance of the blocks while r6xx has 2.  DCE 3.0 cards are slightly
  * different due to the new DIG blocks, but also have 2 instances.
-- 
1.8.3.1