[RFC PATCH v2 19/21] ARM: dts: exynos5250-arndale: add dsi and panel nodes

[Andrzej Hajda]

The patch adds bridge and panel nodes.
It adds also DSI properties specific for arndale board.

Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 39 ++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index a0a985d..7d666b1 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -584,6 +584,45 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "boe,hv070wsa-100";
+		power-supply = <&vcc_3v3_reg>;
+		enable-gpios = <&gpd1 3 0>;
+		port {
+			panel_ep: endpoint {
+				remote-endpoint = <&bridge_out_ep>;
+			};
+		};
+	};
+
+	dsi_0: dsi at 14500000 {
+		vddcore-supply = <&ldo8_reg>;
+		vddio-supply = <&ldo10_reg>;
+		samsung,pll-clock-frequency = <24000000>;
+		samsung,burst-clock-frequency = <320000000>;
+		samsung,esc-clock-frequency = <10000000>;
+		status = "okay";
+
+		bridge at 0 {
+			reg = <0>;
+			compatible = "toshiba,tc358764";
+			vddc-supply = <&vcc_1v2_reg>;
+			vddio-supply = <&vcc_1v8_reg>;
+			vddmipi-supply = <&vcc_1v2_reg>;
+			vddlvds133-supply = <&vcc_3v3_reg>;
+			vddlvds112-supply = <&vcc_1v2_reg>;
+			reset-gpio = <&gpd1 6 1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port at 1 {
+				reg = <1>;
+				bridge_out_ep: endpoint {
+					remote-endpoint = <&panel_ep>;
+				};
+			};
+		};
+	};
+
 	fimd: fimd at 14400000 {
 		status = "okay";
 	};
-- 
1.8.3.2