[PATCH 12/14] drm: Pass 'flags' from the caller to .get_scanout_position()

Mario Kleiner mario.kleiner.de at gmail.com
Sun Jan 12 16:02:56 PST 2014


On 29/10/13 19:06, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Preparation for moving the early vblank IRQ logic into
> radeon_get_crtc_scanoutpos().
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Tiny compile fix needed for this one. The function prototype for 
radeon_get_crtc_scanoutpos() is also defined in radeon_drv.c, so it 
needs the same update as the one in radeon_mode.h

Other than that

Reviewed-by: mario.kleiner.de at gmail.com

-mario


> ---
>   drivers/gpu/drm/drm_irq.c               | 2 +-
>   drivers/gpu/drm/i915/i915_irq.c         | 3 ++-
>   drivers/gpu/drm/radeon/radeon_display.c | 7 ++++---
>   drivers/gpu/drm/radeon/radeon_mode.h    | 1 +
>   drivers/gpu/drm/radeon/radeon_pm.c      | 2 +-
>   include/drm/drmP.h                      | 2 ++
>   6 files changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
> index b5c4d42..b39255f 100644
> --- a/drivers/gpu/drm/drm_irq.c
> +++ b/drivers/gpu/drm/drm_irq.c
> @@ -585,7 +585,7 @@ int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, int crtc,
>   		/* Get vertical and horizontal scanout position vpos, hpos,
>   		 * and bounding timestamps stime, etime, pre/post query.
>   		 */
> -		vbl_status = dev->driver->get_scanout_position(dev, crtc, &vpos,
> +		vbl_status = dev->driver->get_scanout_position(dev, crtc, flags, &vpos,
>   							       &hpos, &stime, &etime);
>
>   		/* Get correction for CLOCK_MONOTONIC -> CLOCK_REALTIME if
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index f6b3206..70daf3c 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -657,7 +657,8 @@ static bool intel_pipe_in_vblank_locked(struct drm_device *dev, enum pipe pipe)
>   }
>
>   static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
> -			     int *vpos, int *hpos, ktime_t *stime, ktime_t *etime)
> +				    unsigned int flags, int *vpos, int *hpos,
> +				    ktime_t *stime, ktime_t *etime)
>   {
>   	struct drm_i915_private *dev_priv = dev->dev_private;
>   	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
> diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
> index ccd8751..3581570 100644
> --- a/drivers/gpu/drm/radeon/radeon_display.c
> +++ b/drivers/gpu/drm/radeon/radeon_display.c
> @@ -305,7 +305,7 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id)
>   	 * to complete in this vblank?
>   	 */
>   	if (update_pending &&
> -	    (DRM_SCANOUTPOS_VALID & radeon_get_crtc_scanoutpos(rdev->ddev, crtc_id,
> +	    (DRM_SCANOUTPOS_VALID & radeon_get_crtc_scanoutpos(rdev->ddev, crtc_id, 0,
>   							       &vpos, &hpos, NULL, NULL)) &&
>   	    ((vpos >= (99 * rdev->mode_info.crtcs[crtc_id]->base.hwmode.crtc_vdisplay)/100) ||
>   	     (vpos < 0 && !ASIC_IS_AVIVO(rdev)))) {
> @@ -1544,6 +1544,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
>    *
>    * \param dev Device to query.
>    * \param crtc Crtc to query.
> + * \param flags Flags from caller (DRM_CALLED_FROM_VBLIRQ or 0).
>    * \param *vpos Location where vertical scanout position should be stored.
>    * \param *hpos Location where horizontal scanout position should go.
>    * \param *stime Target location for timestamp taken immediately before
> @@ -1565,8 +1566,8 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
>    * unknown small number of scanlines wrt. real scanout position.
>    *
>    */
> -int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, int *vpos, int *hpos,
> -			       ktime_t *stime, ktime_t *etime)
> +int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int flags,
> +			       int *vpos, int *hpos, ktime_t *stime, ktime_t *etime)
>   {
>   	u32 stat_crtc = 0, vbl = 0, position = 0;
>   	int vbl_start, vbl_end, vtotal, ret = 0;
> diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
> index 3bfa910..c4016dc 100644
> --- a/drivers/gpu/drm/radeon/radeon_mode.h
> +++ b/drivers/gpu/drm/radeon/radeon_mode.h
> @@ -758,6 +758,7 @@ extern int radeon_crtc_cursor_move(struct drm_crtc *crtc,
>   				   int x, int y);
>
>   extern int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc,
> +				      unsigned int flags,
>   				      int *vpos, int *hpos, ktime_t *stime,
>   				      ktime_t *etime);
>
> diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
> index 98bf63b..a394049 100644
> --- a/drivers/gpu/drm/radeon/radeon_pm.c
> +++ b/drivers/gpu/drm/radeon/radeon_pm.c
> @@ -1468,7 +1468,7 @@ static bool radeon_pm_in_vbl(struct radeon_device *rdev)
>   	 */
>   	for (crtc = 0; (crtc < rdev->num_crtc) && in_vbl; crtc++) {
>   		if (rdev->pm.active_crtcs & (1 << crtc)) {
> -			vbl_status = radeon_get_crtc_scanoutpos(rdev->ddev, crtc, &vpos, &hpos, NULL, NULL);
> +			vbl_status = radeon_get_crtc_scanoutpos(rdev->ddev, crtc, 0, &vpos, &hpos, NULL, NULL);
>   			if ((vbl_status & DRM_SCANOUTPOS_VALID) &&
>   			    !(vbl_status & DRM_SCANOUTPOS_INVBL))
>   				in_vbl = false;
> diff --git a/include/drm/drmP.h b/include/drm/drmP.h
> index 14d4046..13c7942 100644
> --- a/include/drm/drmP.h
> +++ b/include/drm/drmP.h
> @@ -840,6 +840,7 @@ struct drm_driver {
>   	 *
>   	 * \param dev  DRM device.
>   	 * \param crtc Id of the crtc to query.
> +	 * \param flags Flags from the caller (DRM_CALLED_FROM_VBLIRQ or 0).
>   	 * \param *vpos Target location for current vertical scanout position.
>   	 * \param *hpos Target location for current horizontal scanout position.
>   	 * \param *stime Target location for timestamp taken immediately before
> @@ -862,6 +863,7 @@ struct drm_driver {
>   	 *
>   	 */
>   	int (*get_scanout_position) (struct drm_device *dev, int crtc,
> +				     unsigned int flags,
>   				     int *vpos, int *hpos, ktime_t *stime,
>   				     ktime_t *etime);
>
>



More information about the dri-devel mailing list