[PATCH 4/4] ARM: tegra: roth: add display DT node

[Alexandre Courbot]

DSI support has been fixed to support continuous clock behavior that the
panel used on SHIELD requires, so finally add its device tree node since
it is functional.

Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
 arch/arm/boot/dts/tegra114-roth.dts | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index ba210c6..c03c853 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -28,6 +28,22 @@
 		reg = <0x80000000 0x79600000>;
 	};
 
+	host1x at 50000000 {
+		dsi at 54300000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_1v2_ap>;
+
+			panel at 0 {
+				compatible = "lg,lh500wx1-sd03";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
 	pinmux at 70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -811,7 +827,6 @@
 						regulator-name = "vdd-1v8";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
 						regulator-boot-on;
 					};
 
@@ -858,10 +873,11 @@
 						regulator-name = "vdd-2v8-display";
 						regulator-min-microvolt = <2800000>;
 						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
 						regulator-boot-on;
 					};
 
-					ldo3 {
+					vdd_1v2_ap: ldo3 {
 						regulator-name = "avdd-1v2";
 						regulator-min-microvolt = <1200000>;
 						regulator-max-microvolt = <1200000>;
@@ -1048,7 +1064,7 @@
 			regulator-boot-on;
 		};
 
-		regulator at 1 {
+		vdd_lcd: regulator at 1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
 			regulator-name = "vdd_lcd_1v8";
@@ -1057,6 +1073,7 @@
 			vin-supply = <&vdd_1v8>;
 			enable-active-high;
 			gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
 			regulator-boot-on;
 		};
 
-- 
2.0.0