[RESEND PATCH v3 06/11] drm: add DT bindings documentation for atmel-hlcdc-dc driver

Boris BREZILLON boris.brezillon at free-electrons.com
Fri Jul 11 05:19:29 PDT 2014


On Fri, 11 Jul 2014 14:00:25 +0200
Boris BREZILLON <boris.brezillon at free-electrons.com> wrote:

> On Fri, 11 Jul 2014 12:37:46 +0200
> Laurent Pinchart <laurent.pinchart at ideasonboard.com> wrote:
> 
> > Hi Boris,
> > 
> > On Thursday 10 July 2014 14:56:26 Boris BREZILLON wrote:
> > > On Thu, 10 Jul 2014 13:16:21 +0200 Laurent Pinchart wrote:
> > > > On Monday 07 July 2014 18:42:59 Boris BREZILLON wrote:
> > > > > The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e.
> > > > > at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display
> > > > > controller device.
> > > > > 
> > > > > The HLCDC block provides a single RGB output port, and only supports LCD
> > > > > panels connection to LCD panels for now.
> > > > > 
> > > > > The atmel,panel property link the HLCDC RGB output with the LCD panel
> > > > > connected on this port (note that the HLCDC RGB connector implementation
> > > > > makes use of the DRM panel framework).
> > > > > 
> > > > > Connection to other external devices (DRM bridges) might be added later
> > > > > by mean of a new atmel,xxx (atmel,bridge) property.
> > > > > 
> > > > > Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
> > > > > ---
> > > > > 
> > > > >  .../devicetree/bindings/drm/atmel-hlcdc-dc.txt     | 59 +++++++++++++++
> > > > >  1 file changed, 59 insertions(+)
> > > > >  create mode 100644
> > > > >  Documentation/devicetree/bindings/drm/atmel-hlcdc-dc.txt
> > > > > 
> > > > > diff --git a/Documentation/devicetree/bindings/drm/atmel-hlcdc-dc.txt
> > > > > b/Documentation/devicetree/bindings/drm/atmel-hlcdc-dc.txt new file mode
> > > > > 100644
> > > > > index 0000000..594bdb2
> > > > > --- /dev/null
> > > > > +++ b/Documentation/devicetree/bindings/drm/atmel-hlcdc-dc.txt
> > > > > @@ -0,0 +1,59 @@
> > > > > +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
> > > > > +
> > > > > +The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD
> > > > > device.
> > > > > +See Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt for more
> > > > > details.
> > > > > +
> > > > > +Required properties:
> > > > > + - compatible: value should be one of the following:
> > > > > +   "atmel,hlcdc-dc"
> > > > > + - interrupts: the HLCDC interrupt definition
> > > > > + - pinctrl-names: the pin control state names. Should contain
> > > > > "default",
> > > > > +   "rgb-444", "rgb-565", "rgb-666" and "rgb-888".
> > > > > + - pinctrl-[0-4]: should contain the pinctrl states described by
> > > > > pinctrl
> > > > > +   names.
> > > > 
> > > > Do you need to switch between the different pinctrl configurations at
> > > > runtime, or is the configuration selected from the panel type, which
> > > > doesn't change ?
> > >
> > > At the moment no, but if we ever need to support different devices on
> > > the same RGB connector (actually Atmel's sama5d3xek boards have an
> > > RGB to HDMI bridge connected on the same RGB connector) and these
> > > devices do not support the same RGB mode (say your LCD panel supports
> > > RGB888 and your RGB to HDMI bridge supports RGB555), then depending on
> > > the output you select you'll have to change your pinctrl config at
> > > runtime.
> > 
> > Just to make sure I understand the use case correctly, are you talking about 
> > two devices (for example an RGB666 panel and an RGB888 RGB to HDMI bridge) 
> > connected to the same output, with the ability to switch between the two at 
> > runtime ?
> 
> Exactly.
> 
> > That's a valid case (on a side note we shouldn't forget that the 
> > option of using both devices at the same time should be supported as well), 
> 
> AFAICT this is only possible if both devices connected to the RGB
> connector use the same mode.
> 
> > but I would probably go for a fixed pinctrl configuration that supports both, 
> > although switching configurations at runtime would be a micro-optimization 
> > that might make sense.
> 
> Yep, it should work, and I agree that we're unlikely to reuse some RGB
> pins for other usage when the active device is the one using RGB666
> mode.
> 
> > 
> > > I'd say we could get rid of this runtime pinctrl config as a first step
> > > if DT ABI stability was not required.
> > > But it is, and I'd like to have a future proof binding to handle these
> > > tricky cases when they occurs (if they ever do).
> > 
> > I think we have a shortcoming of the pinctrl API here in the general case. The 
> > API only allows you to select a single configuration per device. Imagine the 
> > same display controller, with two DPI outputs, each of them configurable in 
> > 444, 565, 666 or 888 modes. With the current API we would have to create 4*4 = 
> > 16 pinctrl configurations for all combinations. That obviously wouldn't scale, 
> > so we'll have to fix this eventually. From a DT stability point of view, I 
> > would thus avoid specifying multiple pinctrl configurations now until we come 
> > up with a standard way to support this use case.
> 
> Given your inputs, I guess I'll drop dynamic pinctrl config for the
> next version.
> 
> > 
> > > Anyway, I'm open to any other alternative that could let me add support
> > > for this later on.
> > > 
> > > BTW, is there any reason for not defining an RGB connector type (I'm
> > > currently defining HLCDC connector as an LVDS connector) ?
> > 
> > Not that I know of. The DRM API has been developed before display on embedded 
> > systems became such a hot topic. If we had to redo it today, panels might be 
> > exposed to userspace as such, with a connector. We have to live with the past, 
> > so the connector will stay, but adding a new RGB connector type could make 
> > sense (although we might need a different name, in a way the VGA and LVDS 
> > connectors also carry RGB signals).
> 
> I had the same concern: I didn't find how this kind of connectors
> was named (most of the time they're just referenced as RGB) :-).
> What about RAW_RGB ?

Okay, actually there is a widely used name for this kind of connectors
and it's "Parallel RGB" (thanks Thomas ;-)).

> 
> > 
> > > > > + - atmel,panel: Should contain a phandle with 2 parameters.
> > > > > +   The first cell is a phandle to a DRM panel device
> > > > > +   The second cell encodes the RGB mode, which can take the following
> > > > > values:
> > > > > +   * 0: RGB444
> > > > > +   * 1: RGB565
> > > > > +   * 2: RGB666
> > > > > +   * 3: RGB888
> > > > > +   The third cell encodes specific flags describing LCD signals
> > > > > configuration
> > > > > +   (see Atmel's datasheet for a full description of these
> > > > > fields):
> > > > > +   * bit 0: HSPOL: Horizontal Synchronization Pulse Polarity
> > > > > +   * bit 1: VSPOL: Vertical Synchronization Pulse Polarity
> > > > > +   * bit 2: VSPDLYS: Vertical Synchronization Pulse Start
> > > > > +   * bit 3: VSPDLYE: Vertical Synchronization Pulse End
> > > > > +   * bit 4: DISPPOL: Display Signal Polarity
> > > > > +   * bit 7: DISPDLY: LCD Controller Display Power Signal
> > > > > Synchronization
> > > > > +   * bit 12: VSPSU: LCD Controller Vertical synchronization Pulse Setup
> > > > > Configuration
> > > > > +   * bit 13: VSPHO: LCD Controller Vertical synchronization Pulse Hold
> > > > > Configuration
> > > > > +   * bit 16-20: GUARDTIME: LCD DISPLAY Guard Time
> > > > 
> > > > If I'm not mistaken, those are HLCDC configuration values that depend on
> > > > the panel type and characteristics. Shouldn't they then be queries from
> > > > the panel through the drm_panel API at runtime instead of being specified
> > > > in DT ? This would likely require extending the drm_panel API.
> > > 
> > > HSPOL and VSPOL can be deduced from DRM_MODE_FLAG_[PN]HSYNC and
> > > DRM_MODE_FLAG_[PN]VSYNC, I'm not sure for the other flags or the
> > > GUARDTIME value.
> > > 
> > > Another question I had regarding these flags is whether they were LCD
> > > panel specific or a mix of panel and board implementation.
> > > Take the VSYNC HSYNC polarity, of course the LCD panel defines what it
> > > expects in terms of polarity, but nothing prevents the HW designer from
> > > inverting the VSYNC/HSYNC polarity (expect common sense :-)), right ?
> > >
> > > A solution would be to override some drm_display_mode settings with
> > > informations taken from the DT.
> > 
> > Given that I gave the exact same argument during a V4L2 DT bindings design 
> > review, I can only agree :-) It thus makes sense to specify polarities in the 
> > HLCDC DT node. The RGB mode, however, should probably be queried from the 
> > panel, as I don't expect it to be board-dependent but only panel-dependent.
> 
> Yes, what I had in mind is some kind of RGB connector framework (or
> just helper functions), where you could define the supported RGB modes
> and rely on another infrastructure to define the supported drm display
> modes.
> Because RGB connector is not just related to panels: see this RGB to
> HDMI bridge [1] (this is the one used on Atmel's dev boards).
> Moreover, simple panels are connector agnostics for now, and I'm not
> sure we want to change that.
> 
> [1]http://pdf1.alldatasheet.fr/datasheet-pdf/view/218068/SILICONIMAGE/SII9022.html
> 
> > 
> > I'm not sure about the other bits in the third cell, maybe we should discuss 
> > them in more details. I'm always wary when I see DT bindings referring to a 
> > datasheet :-) Getting the information from the panel by default, with a 
> > possible override, is an interesting option. You would thus likely need 
> > several DT properties associated with each connection to a panel. Would it 
> > then make sense to use the OF graph DT bindings instead of the atmel,panel 
> > property to specify connections ? You could store per-connection data in the 
> > endpoint and/or port nodes.
> 
> I'll take a look at these bindings and let you know if they match my
> needs.
> 
> > 
> > > Thanks for your review.
> > 
> > You're welcome. Sorry for not having had time to review the driver itself. 
> > Given my limited bandwidth at the moment I've decided to concentrate on the DT 
> > bindings first.
> 
> No problem, after all DT bindings is the most tricky part of our work
> nowadays, isn't it ;-) ?
> 
> Thanks,
> 
> Boris
> 



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


More information about the dri-devel mailing list