[PATCH 0/8] tilcdc-panel: Backlight and GPIO devicetree support

[Ezequiel Garcia]

On 24 Jul 04:25 PM, Darren Etheridge wrote:
> On 07/11/2014 09:18 AM, Ezequiel Garcia wrote:
> >Hello all,
> >
> >This patchset adds the required changes to support an optional backlight
> >and GPIO for the tilcdc panel driver.
> >
> >There was some code to support a backlight, but it was somewhat broken
> >and undocumented. I've followed the nice implementation in panel-simple
> >and added a similar one here.
> >
> >The enable GPIO is required to turn on and off devices with such capability.
> >Also here, I've followed panel-simple which looks correct.
> >
> >In addition to this there are very minor cosmetic cleanups and a larger
> >error path fix in tilcdc's DRM driver .load error path.
> >
> >This patchset applies on top of drm-next branch which contains the latest
> >tilcdc pushed by Guido.
> >
> >If at all possible, I'd like to get this merged for v3.17. If a pull request
> >is needed, don't hesitate to ask and I'll prepare one.
> >
> >Comments and tests welcome!
> >
> 
> All of the changes seem to make sense and I tested on AM335x-EVM both with
> and without the addition "backlight = " in the dts for the panel node.
> 
> I see no issues in either case, continued to work as before.
> 
> Tested against 3.16-rc6 with this patchset and the earlier patchset from
> Guido applied.
> 
> Also tested on BeagleBone Black even though it doesn't have a panel, just to
> make sure nothing changed there.
> 
> For the series:
> Tested-by: Darren Etheridge <detheridge at ti.com>
> 

Thanks a lot for the test!
-- 
Ezequiel Garcia, VanguardiaSur
www.vanguardiasur.com.ar