[PATCH v2 10/19] drm: sti: add VID layer

Benjamin Gaignard benjamin.gaignard at linaro.org
Tue May 13 11:26:19 PDT 2014


VIDeo plug are one of the compositor input sub-devices.
VID are dedicated to video inputs like YUV plans.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
Signed-off-by: Vincent Abriou <vincent.abriou at st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne at st.com>
---
 drivers/gpu/drm/sti/Makefile    |   1 +
 drivers/gpu/drm/sti/sti_layer.h |   4 ++
 drivers/gpu/drm/sti/sti_vid.c   | 138 ++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/sti/sti_vid.h   |  33 ++++++++++
 4 files changed, 176 insertions(+)
 create mode 100644 drivers/gpu/drm/sti/sti_vid.c
 create mode 100644 drivers/gpu/drm/sti/sti_vid.h

diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index cc04475..b9a3b74 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -6,6 +6,7 @@ stidrm-y := sti_tvout.o \
 			sti_hdmi_tx3g4c28phy.o \
 			sti_hda.o \
 			sti_gdp.o \
+			sti_vid.o \
 			sti_ddc.o
 
 obj-$(CONFIG_VTAC_STI) += sti_vtac_tx.o sti_vtac_rx.o
diff --git a/drivers/gpu/drm/sti/sti_layer.h b/drivers/gpu/drm/sti/sti_layer.h
index 45cd1ea..bf3a14f 100644
--- a/drivers/gpu/drm/sti/sti_layer.h
+++ b/drivers/gpu/drm/sti/sti_layer.h
@@ -11,6 +11,7 @@
 
 #include <drm/drmP.h>
 #include "sti_gdp.h"
+#include "sti_vid.h"
 
 #define to_sti_layer(x) container_of(x, struct sti_layer, plane)
 
@@ -58,6 +59,7 @@ struct sti_fps_info {
  * @mode:		display mode
  * @desc:		layer type & id
  * @zorder:		layer z-order
+ * @mixer_id:           id of the mixer used to display the layer
  * @enabled:		to know if the layer is active or not
  * @src_x src_y:	coordinates of the input (fb) area
  * @src_w src_h:	size of the input (fb) area
@@ -69,6 +71,7 @@ struct sti_fps_info {
  * @paddr:		physical address of the input buffer
  * @fps_info:		frame per second info
  * @gdp:                related GDP (if the layer is a GDP)
+ * @vid:                related VID (if the layer is a VID/VDP)
  */
 struct sti_layer {
 	struct drm_plane plane;
@@ -88,6 +91,7 @@ struct sti_layer {
 	dma_addr_t paddr;
 	struct sti_fps_info fps_info;
 	struct sti_gdp *gdp;
+	struct sti_vid *vid;
 };
 
 struct sti_layer *sti_layer_create(struct device *dev, int desc,
diff --git a/drivers/gpu/drm/sti/sti_vid.c b/drivers/gpu/drm/sti/sti_vid.c
new file mode 100644
index 0000000..710665d
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_vid.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2013
+ * Author: Fabien Dessenne <fabien.dessenne at st.com> for STMicroelectronics.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <drm/drmP.h>
+
+#include "sti_vid.h"
+#include "sti_layer.h"
+#include "sti_vtg_utils.h"
+
+/* Registers */
+#define VID_CTL                 0x00
+#define VID_ALP                 0x04
+#define VID_CLF                 0x08
+#define VID_VPO                 0x0C
+#define VID_VPS                 0x10
+#define VID_KEY1                0x28
+#define VID_KEY2                0x2C
+#define VID_MPR0                0x30
+#define VID_MPR1                0x34
+#define VID_MPR2                0x38
+#define VID_MPR3                0x3C
+#define VID_MST                 0x68
+#define VID_BC                  0x70
+#define VID_TINT                0x74
+#define VID_CSAT                0x78
+
+/* Registers values */
+#define VID_CTL_IGNORE          ((1<<30) | (1<<31))
+#define VID_CTL_PSI_ENABLE      ((1<<2) | (1<<1) | (1<<0))
+#define VID_ALP_OPAQUE          0x00000080
+#define VID_BC_DFLT             0x00008000
+#define VID_TINT_DFLT           0x00000000
+#define VID_CSAT_DFLT           0x00000080
+/* YCbCr to RGB BT709:
+ * R = Y+1.5391Cr
+ * G = Y-0.4590Cr-0.1826Cb
+ * B = Y+1.8125Cb */
+#define VID_MPR0_BT709          0x0A800000
+#define VID_MPR1_BT709          0x0AC50000
+#define VID_MPR2_BT709          0x07150545
+#define VID_MPR3_BT709          0x00000AE8
+
+static int sti_vid_prepare_layer(void *lay, bool first_prepare)
+{
+	u32 val;
+	struct sti_layer *layer = (struct sti_layer *)lay;
+	struct sti_vid *vid = layer->vid;
+
+	/* Unmask */
+	val = readl(vid->regs + VID_CTL);
+	val &= ~VID_CTL_IGNORE;
+	writel(val, vid->regs + VID_CTL);
+
+	return 0;
+}
+
+static int sti_vid_commit_layer(void *lay)
+{
+	struct sti_layer *layer = (struct sti_layer *)lay;
+	struct sti_vid *vid = layer->vid;
+	struct drm_display_mode *mode = layer->mode;
+	u32 ydo, xdo, yds, xds;
+
+	ydo = sti_vtg_get_line_number(*mode, layer->dst_y);
+	yds = sti_vtg_get_line_number(*mode, layer->dst_y + layer->dst_h - 1);
+	xdo = sti_vtg_get_pixel_number(*mode, layer->dst_x);
+	xds = sti_vtg_get_pixel_number(*mode, layer->dst_x + layer->dst_w - 1);
+
+	writel((ydo << 16) | xdo, vid->regs + VID_VPO);
+	writel((yds << 16) | xds, vid->regs + VID_VPS);
+
+	return 0;
+}
+
+static int sti_vid_disable_layer(void *lay)
+{
+	u32 val;
+	struct sti_layer *layer = (struct sti_layer *)lay;
+	struct sti_vid *vid = layer->vid;
+
+	/* Mask */
+	val = readl(vid->regs + VID_CTL);
+	val |= VID_CTL_IGNORE;
+	writel(val, vid->regs + VID_CTL);
+
+	return 0;
+}
+
+static void sti_vid_set_default(struct sti_vid *vid)
+{
+	/* Enable PSI, Mask layer */
+	writel(VID_CTL_PSI_ENABLE | VID_CTL_IGNORE, vid->regs + VID_CTL);
+
+	/* Opaque */
+	writel(VID_ALP_OPAQUE, vid->regs + VID_ALP);
+
+	/* Color conversion parameters */
+	writel(VID_MPR0_BT709, vid->regs + VID_MPR0);
+	writel(VID_MPR1_BT709, vid->regs + VID_MPR1);
+	writel(VID_MPR2_BT709, vid->regs + VID_MPR2);
+	writel(VID_MPR3_BT709, vid->regs + VID_MPR3);
+
+	/* Brightness, contrast, tint, saturation */
+	writel(VID_BC_DFLT, vid->regs + VID_BC);
+	writel(VID_TINT_DFLT, vid->regs + VID_TINT);
+	writel(VID_CSAT_DFLT, vid->regs + VID_CSAT);
+}
+
+struct sti_vid *sti_vid_create(struct device *dev, void __iomem *baseaddr)
+{
+	struct sti_vid *vid;
+
+	DRM_DEBUG_DRIVER("\n");
+
+	vid = devm_kzalloc(dev, sizeof(*vid), GFP_KERNEL);
+	if (!vid) {
+		DRM_ERROR("Failed to allocate memory for VID\n");
+		return NULL;
+	}
+
+	vid->dev = dev;
+	vid->regs = baseaddr;
+	vid->prepare = sti_vid_prepare_layer;
+	vid->commit = sti_vid_commit_layer;
+	vid->disable = sti_vid_disable_layer;
+	/* As the VID input is HW-mapped to the VDP output, the supported
+	 * formats are under the VDP control */
+	vid->get_formats = NULL;
+	vid->get_nb_formats = NULL;
+
+	/* Set default configuration (static) */
+	sti_vid_set_default(vid);
+
+	return vid;
+}
diff --git a/drivers/gpu/drm/sti/sti_vid.h b/drivers/gpu/drm/sti/sti_vid.h
new file mode 100644
index 0000000..dd4fd95
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_vid.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2013
+ * Author: Fabien Dessenne <fabien.dessenne at st.com> for STMicroelectronics.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_VID_H_
+#define _STI_VID_H_
+
+/*
+ * STI VID structure
+ *
+ * @device:		driver device
+ * @regs:               subdevice register
+ * @get_formats:	get VID supported formats
+ * @get_nb_formats:	get number of format supported
+ * @prepare:		prepare VID before rendering
+ * @commit:		set VID for rendering
+ * @disable:		disable VID
+ */
+struct sti_vid {
+	struct device *dev;
+	void __iomem *regs;
+	const uint32_t* (*get_formats)(void);
+	int (*get_nb_formats)(void);
+	int (*prepare)(void *layer, bool first_prepare);
+	int (*commit)(void *layer);
+	int (*disable)(void *layer);
+};
+
+struct sti_vid *sti_vid_create(struct device *dev, void __iomem *baseaddr);
+
+#endif
-- 
1.9.1



More information about the dri-devel mailing list