[PATCH V5 7/7] dt-bindings: add document for dw-hdmi

Andy Yan andy.yan at rock-chips.com
Mon Nov 10 01:44:22 PST 2014


Hi ZubairLK
On 2014年11月10日 17:17, Zubair Lutfullah Kakakhel wrote:
> Nice work.
>
> This patch should move the binding from
>
> Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
> to the location instead of making a new file and leaving the old
> one in place.
>
> And use git format-patch -M to highlight any changes.
>
> Regards
> ZubairLK
    I add these bindings for dw-hdmi core, because
   properities like reg, interrupts, ddc-i2c-bus, reg-io-width are used
   by dw-hdmi core, but properities like compatible, gpr,clk, are platform
   specific , they are handled by the platform code like dw_hdmi-imx.c
   and described in platform specific dt binds like /imx-drm/hdmi.txt
> On 08/11/14 05:32, Andy Yan wrote:
>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>> ---
>>   .../devicetree/bindings/drm/bridge/dw-hdmi.txt     | 38 ++++++++++++++++++++++
>>   1 file changed, 38 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
>>
>> diff --git a/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
>> new file mode 100644
>> index 0000000..aa7ed17
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
>> @@ -0,0 +1,38 @@
>> +DesignWare HDMI bridge bindings
>> +
>> +Required properities:
>> +- compatibel: platform specific such as "fsl,imx6q-hdmi","fsl,imx6dl-hdmi"
>> +	      "rockchip,rk3288-dw-hdmi"
>> +- reg: physical base address of the controller and length
>> +- ddc-i2c-bus: the ddc i2c bus
>> +- interrupts: The interrupt number to the cpu
>> +
>> +Optional properties
>> +- reg-io-width: the width of the reg:1,4, default set to 1 if not present
>> +
>> +Example:
>> +	hdmi: hdmi at 0120000 {
>> +		compatible = "fsl,imx6q-hdmi";
>> +		reg = <0x00120000 0x9000>;
>> +		interrupts = <0 115 0x04>;
>> +		gpr = <&gpr>;
>> +		clocks = <&clks 123>, <&clks 124>;
>> +		clock-names = "iahb", "isfr";
>> +		ddc-i2c-bus = <&i2c2>;
>> +
>> +		port at 0 {
>> +			reg = <0>;
>> +
>> +			hdmi_mux_0: endpoint {
>> +				remote-endpoint = <&ipu1_di0_hdmi>;
>> +			};
>> +		};
>> +
>> +		port at 1 {
>> +			reg = <1>;
>> +
>> +			hdmi_mux_1: endpoint {
>> +				remote-endpoint = <&ipu1_di1_hdmi>;
>> +			};
>> +		};
>> +	};
>>
>
>




More information about the dri-devel mailing list