[PATCH 02/18] Remove i810_drm.h and i830_drm.h from the distribution tarball
Emil Velikov
emil.l.velikov at gmail.com
Sun Sep 7 14:29:57 PDT 2014
Both of these headers are not installed since they were imported.
They are not even used internally. The latter does not exist in the
kernel...
Note the * symbol in EXTRA_DIST causes 'make distcheck' fail. When was
the last time we ran it ?
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Damien Lespiau <damien.lespiau at intel.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Signed-off-by: Emil Velikov <emil.l.velikov at gmail.com>
---
Makefile.am | 2 +-
include/drm/i810_drm.h | 281 ----------------------------------------
include/drm/i830_drm.h | 342 -------------------------------------------------
3 files changed, 1 insertion(+), 624 deletions(-)
delete mode 100644 include/drm/i810_drm.h
delete mode 100644 include/drm/i830_drm.h
diff --git a/Makefile.am b/Makefile.am
index 083861f..a9ec25b 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -69,7 +69,7 @@ libdrm_la_SOURCES = $(LIBDRM_FILES)
libdrmincludedir = ${includedir}
libdrminclude_HEADERS = $(LIBDRM_H_FILES)
-EXTRA_DIST = libdrm.pc.in include/drm/*
+EXTRA_DIST = libdrm.pc.in
klibdrmincludedir = ${includedir}/libdrm
klibdrminclude_HEADERS = $(LIBDRM_INCLUDE_H_FILES)
diff --git a/include/drm/i810_drm.h b/include/drm/i810_drm.h
deleted file mode 100644
index 7a10bb6..0000000
--- a/include/drm/i810_drm.h
+++ /dev/null
@@ -1,281 +0,0 @@
-#ifndef _I810_DRM_H_
-#define _I810_DRM_H_
-
-/* WARNING: These defines must be the same as what the Xserver uses.
- * if you change them, you must change the defines in the Xserver.
- */
-
-#ifndef _I810_DEFINES_
-#define _I810_DEFINES_
-
-#define I810_DMA_BUF_ORDER 12
-#define I810_DMA_BUF_SZ (1<<I810_DMA_BUF_ORDER)
-#define I810_DMA_BUF_NR 256
-#define I810_NR_SAREA_CLIPRECTS 8
-
-/* Each region is a minimum of 64k, and there are at most 64 of them.
- */
-#define I810_NR_TEX_REGIONS 64
-#define I810_LOG_MIN_TEX_REGION_SIZE 16
-#endif
-
-#define I810_UPLOAD_TEX0IMAGE 0x1 /* handled clientside */
-#define I810_UPLOAD_TEX1IMAGE 0x2 /* handled clientside */
-#define I810_UPLOAD_CTX 0x4
-#define I810_UPLOAD_BUFFERS 0x8
-#define I810_UPLOAD_TEX0 0x10
-#define I810_UPLOAD_TEX1 0x20
-#define I810_UPLOAD_CLIPRECTS 0x40
-
-/* Indices into buf.Setup where various bits of state are mirrored per
- * context and per buffer. These can be fired at the card as a unit,
- * or in a piecewise fashion as required.
- */
-
-/* Destbuffer state
- * - backbuffer linear offset and pitch -- invarient in the current dri
- * - zbuffer linear offset and pitch -- also invarient
- * - drawing origin in back and depth buffers.
- *
- * Keep the depth/back buffer state here to accommodate private buffers
- * in the future.
- */
-#define I810_DESTREG_DI0 0 /* CMD_OP_DESTBUFFER_INFO (2 dwords) */
-#define I810_DESTREG_DI1 1
-#define I810_DESTREG_DV0 2 /* GFX_OP_DESTBUFFER_VARS (2 dwords) */
-#define I810_DESTREG_DV1 3
-#define I810_DESTREG_DR0 4 /* GFX_OP_DRAWRECT_INFO (4 dwords) */
-#define I810_DESTREG_DR1 5
-#define I810_DESTREG_DR2 6
-#define I810_DESTREG_DR3 7
-#define I810_DESTREG_DR4 8
-#define I810_DEST_SETUP_SIZE 10
-
-/* Context state
- */
-#define I810_CTXREG_CF0 0 /* GFX_OP_COLOR_FACTOR */
-#define I810_CTXREG_CF1 1
-#define I810_CTXREG_ST0 2 /* GFX_OP_STIPPLE */
-#define I810_CTXREG_ST1 3
-#define I810_CTXREG_VF 4 /* GFX_OP_VERTEX_FMT */
-#define I810_CTXREG_MT 5 /* GFX_OP_MAP_TEXELS */
-#define I810_CTXREG_MC0 6 /* GFX_OP_MAP_COLOR_STAGES - stage 0 */
-#define I810_CTXREG_MC1 7 /* GFX_OP_MAP_COLOR_STAGES - stage 1 */
-#define I810_CTXREG_MC2 8 /* GFX_OP_MAP_COLOR_STAGES - stage 2 */
-#define I810_CTXREG_MA0 9 /* GFX_OP_MAP_ALPHA_STAGES - stage 0 */
-#define I810_CTXREG_MA1 10 /* GFX_OP_MAP_ALPHA_STAGES - stage 1 */
-#define I810_CTXREG_MA2 11 /* GFX_OP_MAP_ALPHA_STAGES - stage 2 */
-#define I810_CTXREG_SDM 12 /* GFX_OP_SRC_DEST_MONO */
-#define I810_CTXREG_FOG 13 /* GFX_OP_FOG_COLOR */
-#define I810_CTXREG_B1 14 /* GFX_OP_BOOL_1 */
-#define I810_CTXREG_B2 15 /* GFX_OP_BOOL_2 */
-#define I810_CTXREG_LCS 16 /* GFX_OP_LINEWIDTH_CULL_SHADE_MODE */
-#define I810_CTXREG_PV 17 /* GFX_OP_PV_RULE -- Invarient! */
-#define I810_CTXREG_ZA 18 /* GFX_OP_ZBIAS_ALPHAFUNC */
-#define I810_CTXREG_AA 19 /* GFX_OP_ANTIALIAS */
-#define I810_CTX_SETUP_SIZE 20
-
-/* Texture state (per tex unit)
- */
-#define I810_TEXREG_MI0 0 /* GFX_OP_MAP_INFO (4 dwords) */
-#define I810_TEXREG_MI1 1
-#define I810_TEXREG_MI2 2
-#define I810_TEXREG_MI3 3
-#define I810_TEXREG_MF 4 /* GFX_OP_MAP_FILTER */
-#define I810_TEXREG_MLC 5 /* GFX_OP_MAP_LOD_CTL */
-#define I810_TEXREG_MLL 6 /* GFX_OP_MAP_LOD_LIMITS */
-#define I810_TEXREG_MCS 7 /* GFX_OP_MAP_COORD_SETS ??? */
-#define I810_TEX_SETUP_SIZE 8
-
-/* Flags for clear ioctl
- */
-#define I810_FRONT 0x1
-#define I810_BACK 0x2
-#define I810_DEPTH 0x4
-
-typedef enum _drm_i810_init_func {
- I810_INIT_DMA = 0x01,
- I810_CLEANUP_DMA = 0x02,
- I810_INIT_DMA_1_4 = 0x03
-} drm_i810_init_func_t;
-
-/* This is the init structure after v1.2 */
-typedef struct _drm_i810_init {
- drm_i810_init_func_t func;
- unsigned int mmio_offset;
- unsigned int buffers_offset;
- int sarea_priv_offset;
- unsigned int ring_start;
- unsigned int ring_end;
- unsigned int ring_size;
- unsigned int front_offset;
- unsigned int back_offset;
- unsigned int depth_offset;
- unsigned int overlay_offset;
- unsigned int overlay_physical;
- unsigned int w;
- unsigned int h;
- unsigned int pitch;
- unsigned int pitch_bits;
-} drm_i810_init_t;
-
-/* This is the init structure prior to v1.2 */
-typedef struct _drm_i810_pre12_init {
- drm_i810_init_func_t func;
- unsigned int mmio_offset;
- unsigned int buffers_offset;
- int sarea_priv_offset;
- unsigned int ring_start;
- unsigned int ring_end;
- unsigned int ring_size;
- unsigned int front_offset;
- unsigned int back_offset;
- unsigned int depth_offset;
- unsigned int w;
- unsigned int h;
- unsigned int pitch;
- unsigned int pitch_bits;
-} drm_i810_pre12_init_t;
-
-/* Warning: If you change the SAREA structure you must change the Xserver
- * structure as well */
-
-typedef struct _drm_i810_tex_region {
- unsigned char next, prev; /* indices to form a circular LRU */
- unsigned char in_use; /* owned by a client, or free? */
- int age; /* tracked by clients to update local LRU's */
-} drm_i810_tex_region_t;
-
-typedef struct _drm_i810_sarea {
- unsigned int ContextState[I810_CTX_SETUP_SIZE];
- unsigned int BufferState[I810_DEST_SETUP_SIZE];
- unsigned int TexState[2][I810_TEX_SETUP_SIZE];
- unsigned int dirty;
-
- unsigned int nbox;
- struct drm_clip_rect boxes[I810_NR_SAREA_CLIPRECTS];
-
- /* Maintain an LRU of contiguous regions of texture space. If
- * you think you own a region of texture memory, and it has an
- * age different to the one you set, then you are mistaken and
- * it has been stolen by another client. If global texAge
- * hasn't changed, there is no need to walk the list.
- *
- * These regions can be used as a proxy for the fine-grained
- * texture information of other clients - by maintaining them
- * in the same lru which is used to age their own textures,
- * clients have an approximate lru for the whole of global
- * texture space, and can make informed decisions as to which
- * areas to kick out. There is no need to choose whether to
- * kick out your own texture or someone else's - simply eject
- * them all in LRU order.
- */
-
- drm_i810_tex_region_t texList[I810_NR_TEX_REGIONS + 1];
- /* Last elt is sentinal */
- int texAge; /* last time texture was uploaded */
- int last_enqueue; /* last time a buffer was enqueued */
- int last_dispatch; /* age of the most recently dispatched buffer */
- int last_quiescent; /* */
- int ctxOwner; /* last context to upload state */
-
- int vertex_prim;
-
- int pf_enabled; /* is pageflipping allowed? */
- int pf_active;
- int pf_current_page; /* which buffer is being displayed? */
-} drm_i810_sarea_t;
-
-/* WARNING: If you change any of these defines, make sure to change the
- * defines in the Xserver file (xf86drmMga.h)
- */
-
-/* i810 specific ioctls
- * The device specific ioctl range is 0x40 to 0x79.
- */
-#define DRM_I810_INIT 0x00
-#define DRM_I810_VERTEX 0x01
-#define DRM_I810_CLEAR 0x02
-#define DRM_I810_FLUSH 0x03
-#define DRM_I810_GETAGE 0x04
-#define DRM_I810_GETBUF 0x05
-#define DRM_I810_SWAP 0x06
-#define DRM_I810_COPY 0x07
-#define DRM_I810_DOCOPY 0x08
-#define DRM_I810_OV0INFO 0x09
-#define DRM_I810_FSTATUS 0x0a
-#define DRM_I810_OV0FLIP 0x0b
-#define DRM_I810_MC 0x0c
-#define DRM_I810_RSTATUS 0x0d
-#define DRM_I810_FLIP 0x0e
-
-#define DRM_IOCTL_I810_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I810_INIT, drm_i810_init_t)
-#define DRM_IOCTL_I810_VERTEX DRM_IOW( DRM_COMMAND_BASE + DRM_I810_VERTEX, drm_i810_vertex_t)
-#define DRM_IOCTL_I810_CLEAR DRM_IOW( DRM_COMMAND_BASE + DRM_I810_CLEAR, drm_i810_clear_t)
-#define DRM_IOCTL_I810_FLUSH DRM_IO( DRM_COMMAND_BASE + DRM_I810_FLUSH)
-#define DRM_IOCTL_I810_GETAGE DRM_IO( DRM_COMMAND_BASE + DRM_I810_GETAGE)
-#define DRM_IOCTL_I810_GETBUF DRM_IOWR(DRM_COMMAND_BASE + DRM_I810_GETBUF, drm_i810_dma_t)
-#define DRM_IOCTL_I810_SWAP DRM_IO( DRM_COMMAND_BASE + DRM_I810_SWAP)
-#define DRM_IOCTL_I810_COPY DRM_IOW( DRM_COMMAND_BASE + DRM_I810_COPY, drm_i810_copy_t)
-#define DRM_IOCTL_I810_DOCOPY DRM_IO( DRM_COMMAND_BASE + DRM_I810_DOCOPY)
-#define DRM_IOCTL_I810_OV0INFO DRM_IOR( DRM_COMMAND_BASE + DRM_I810_OV0INFO, drm_i810_overlay_t)
-#define DRM_IOCTL_I810_FSTATUS DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FSTATUS)
-#define DRM_IOCTL_I810_OV0FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_I810_OV0FLIP)
-#define DRM_IOCTL_I810_MC DRM_IOW( DRM_COMMAND_BASE + DRM_I810_MC, drm_i810_mc_t)
-#define DRM_IOCTL_I810_RSTATUS DRM_IO ( DRM_COMMAND_BASE + DRM_I810_RSTATUS)
-#define DRM_IOCTL_I810_FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FLIP)
-
-typedef struct _drm_i810_clear {
- int clear_color;
- int clear_depth;
- int flags;
-} drm_i810_clear_t;
-
-/* These may be placeholders if we have more cliprects than
- * I810_NR_SAREA_CLIPRECTS. In that case, the client sets discard to
- * false, indicating that the buffer will be dispatched again with a
- * new set of cliprects.
- */
-typedef struct _drm_i810_vertex {
- int idx; /* buffer index */
- int used; /* nr bytes in use */
- int discard; /* client is finished with the buffer? */
-} drm_i810_vertex_t;
-
-typedef struct _drm_i810_copy_t {
- int idx; /* buffer index */
- int used; /* nr bytes in use */
- void *address; /* Address to copy from */
-} drm_i810_copy_t;
-
-#define PR_TRIANGLES (0x0<<18)
-#define PR_TRISTRIP_0 (0x1<<18)
-#define PR_TRISTRIP_1 (0x2<<18)
-#define PR_TRIFAN (0x3<<18)
-#define PR_POLYGON (0x4<<18)
-#define PR_LINES (0x5<<18)
-#define PR_LINESTRIP (0x6<<18)
-#define PR_RECTS (0x7<<18)
-#define PR_MASK (0x7<<18)
-
-typedef struct drm_i810_dma {
- void *virtual;
- int request_idx;
- int request_size;
- int granted;
-} drm_i810_dma_t;
-
-typedef struct _drm_i810_overlay_t {
- unsigned int offset; /* Address of the Overlay Regs */
- unsigned int physical;
-} drm_i810_overlay_t;
-
-typedef struct _drm_i810_mc {
- int idx; /* buffer index */
- int used; /* nr bytes in use */
- int num_blocks; /* number of GFXBlocks */
- int *length; /* List of lengths for GFXBlocks (FUTURE) */
- unsigned int last_render; /* Last Render Request */
-} drm_i810_mc_t;
-
-#endif /* _I810_DRM_H_ */
diff --git a/include/drm/i830_drm.h b/include/drm/i830_drm.h
deleted file mode 100644
index e1b08e4..0000000
--- a/include/drm/i830_drm.h
+++ /dev/null
@@ -1,342 +0,0 @@
-#ifndef _I830_DRM_H_
-#define _I830_DRM_H_
-
-/* WARNING: These defines must be the same as what the Xserver uses.
- * if you change them, you must change the defines in the Xserver.
- *
- * KW: Actually, you can't ever change them because doing so would
- * break backwards compatibility.
- */
-
-#ifndef _I830_DEFINES_
-#define _I830_DEFINES_
-
-#define I830_DMA_BUF_ORDER 12
-#define I830_DMA_BUF_SZ (1<<I830_DMA_BUF_ORDER)
-#define I830_DMA_BUF_NR 256
-#define I830_NR_SAREA_CLIPRECTS 8
-
-/* Each region is a minimum of 64k, and there are at most 64 of them.
- */
-#define I830_NR_TEX_REGIONS 64
-#define I830_LOG_MIN_TEX_REGION_SIZE 16
-
-/* KW: These aren't correct but someone set them to two and then
- * released the module. Now we can't change them as doing so would
- * break backwards compatibility.
- */
-#define I830_TEXTURE_COUNT 2
-#define I830_TEXBLEND_COUNT I830_TEXTURE_COUNT
-
-#define I830_TEXBLEND_SIZE 12 /* (4 args + op) * 2 + COLOR_FACTOR */
-
-#define I830_UPLOAD_CTX 0x1
-#define I830_UPLOAD_BUFFERS 0x2
-#define I830_UPLOAD_CLIPRECTS 0x4
-#define I830_UPLOAD_TEX0_IMAGE 0x100 /* handled clientside */
-#define I830_UPLOAD_TEX0_CUBE 0x200 /* handled clientside */
-#define I830_UPLOAD_TEX1_IMAGE 0x400 /* handled clientside */
-#define I830_UPLOAD_TEX1_CUBE 0x800 /* handled clientside */
-#define I830_UPLOAD_TEX2_IMAGE 0x1000 /* handled clientside */
-#define I830_UPLOAD_TEX2_CUBE 0x2000 /* handled clientside */
-#define I830_UPLOAD_TEX3_IMAGE 0x4000 /* handled clientside */
-#define I830_UPLOAD_TEX3_CUBE 0x8000 /* handled clientside */
-#define I830_UPLOAD_TEX_N_IMAGE(n) (0x100 << (n * 2))
-#define I830_UPLOAD_TEX_N_CUBE(n) (0x200 << (n * 2))
-#define I830_UPLOAD_TEXIMAGE_MASK 0xff00
-#define I830_UPLOAD_TEX0 0x10000
-#define I830_UPLOAD_TEX1 0x20000
-#define I830_UPLOAD_TEX2 0x40000
-#define I830_UPLOAD_TEX3 0x80000
-#define I830_UPLOAD_TEX_N(n) (0x10000 << (n))
-#define I830_UPLOAD_TEX_MASK 0xf0000
-#define I830_UPLOAD_TEXBLEND0 0x100000
-#define I830_UPLOAD_TEXBLEND1 0x200000
-#define I830_UPLOAD_TEXBLEND2 0x400000
-#define I830_UPLOAD_TEXBLEND3 0x800000
-#define I830_UPLOAD_TEXBLEND_N(n) (0x100000 << (n))
-#define I830_UPLOAD_TEXBLEND_MASK 0xf00000
-#define I830_UPLOAD_TEX_PALETTE_N(n) (0x1000000 << (n))
-#define I830_UPLOAD_TEX_PALETTE_SHARED 0x4000000
-#define I830_UPLOAD_STIPPLE 0x8000000
-
-/* Indices into buf.Setup where various bits of state are mirrored per
- * context and per buffer. These can be fired at the card as a unit,
- * or in a piecewise fashion as required.
- */
-
-/* Destbuffer state
- * - backbuffer linear offset and pitch -- invarient in the current dri
- * - zbuffer linear offset and pitch -- also invarient
- * - drawing origin in back and depth buffers.
- *
- * Keep the depth/back buffer state here to accommodate private buffers
- * in the future.
- */
-
-#define I830_DESTREG_CBUFADDR 0
-#define I830_DESTREG_DBUFADDR 1
-#define I830_DESTREG_DV0 2
-#define I830_DESTREG_DV1 3
-#define I830_DESTREG_SENABLE 4
-#define I830_DESTREG_SR0 5
-#define I830_DESTREG_SR1 6
-#define I830_DESTREG_SR2 7
-#define I830_DESTREG_DR0 8
-#define I830_DESTREG_DR1 9
-#define I830_DESTREG_DR2 10
-#define I830_DESTREG_DR3 11
-#define I830_DESTREG_DR4 12
-#define I830_DEST_SETUP_SIZE 13
-
-/* Context state
- */
-#define I830_CTXREG_STATE1 0
-#define I830_CTXREG_STATE2 1
-#define I830_CTXREG_STATE3 2
-#define I830_CTXREG_STATE4 3
-#define I830_CTXREG_STATE5 4
-#define I830_CTXREG_IALPHAB 5
-#define I830_CTXREG_STENCILTST 6
-#define I830_CTXREG_ENABLES_1 7
-#define I830_CTXREG_ENABLES_2 8
-#define I830_CTXREG_AA 9
-#define I830_CTXREG_FOGCOLOR 10
-#define I830_CTXREG_BLENDCOLR0 11
-#define I830_CTXREG_BLENDCOLR 12 /* Dword 1 of 2 dword command */
-#define I830_CTXREG_VF 13
-#define I830_CTXREG_VF2 14
-#define I830_CTXREG_MCSB0 15
-#define I830_CTXREG_MCSB1 16
-#define I830_CTX_SETUP_SIZE 17
-
-/* 1.3: Stipple state
- */
-#define I830_STPREG_ST0 0
-#define I830_STPREG_ST1 1
-#define I830_STP_SETUP_SIZE 2
-
-/* Texture state (per tex unit)
- */
-
-#define I830_TEXREG_MI0 0 /* GFX_OP_MAP_INFO (6 dwords) */
-#define I830_TEXREG_MI1 1
-#define I830_TEXREG_MI2 2
-#define I830_TEXREG_MI3 3
-#define I830_TEXREG_MI4 4
-#define I830_TEXREG_MI5 5
-#define I830_TEXREG_MF 6 /* GFX_OP_MAP_FILTER */
-#define I830_TEXREG_MLC 7 /* GFX_OP_MAP_LOD_CTL */
-#define I830_TEXREG_MLL 8 /* GFX_OP_MAP_LOD_LIMITS */
-#define I830_TEXREG_MCS 9 /* GFX_OP_MAP_COORD_SETS */
-#define I830_TEX_SETUP_SIZE 10
-
-#define I830_TEXREG_TM0LI 0 /* load immediate 2 texture map n */
-#define I830_TEXREG_TM0S0 1
-#define I830_TEXREG_TM0S1 2
-#define I830_TEXREG_TM0S2 3
-#define I830_TEXREG_TM0S3 4
-#define I830_TEXREG_TM0S4 5
-#define I830_TEXREG_NOP0 6 /* noop */
-#define I830_TEXREG_NOP1 7 /* noop */
-#define I830_TEXREG_NOP2 8 /* noop */
-#define __I830_TEXREG_MCS 9 /* GFX_OP_MAP_COORD_SETS -- shared */
-#define __I830_TEX_SETUP_SIZE 10
-
-#define I830_FRONT 0x1
-#define I830_BACK 0x2
-#define I830_DEPTH 0x4
-
-#endif /* _I830_DEFINES_ */
-
-typedef struct _drm_i830_init {
- enum {
- I830_INIT_DMA = 0x01,
- I830_CLEANUP_DMA = 0x02
- } func;
- unsigned int mmio_offset;
- unsigned int buffers_offset;
- int sarea_priv_offset;
- unsigned int ring_start;
- unsigned int ring_end;
- unsigned int ring_size;
- unsigned int front_offset;
- unsigned int back_offset;
- unsigned int depth_offset;
- unsigned int w;
- unsigned int h;
- unsigned int pitch;
- unsigned int pitch_bits;
- unsigned int back_pitch;
- unsigned int depth_pitch;
- unsigned int cpp;
-} drm_i830_init_t;
-
-/* Warning: If you change the SAREA structure you must change the Xserver
- * structure as well */
-
-typedef struct _drm_i830_tex_region {
- unsigned char next, prev; /* indices to form a circular LRU */
- unsigned char in_use; /* owned by a client, or free? */
- int age; /* tracked by clients to update local LRU's */
-} drm_i830_tex_region_t;
-
-typedef struct _drm_i830_sarea {
- unsigned int ContextState[I830_CTX_SETUP_SIZE];
- unsigned int BufferState[I830_DEST_SETUP_SIZE];
- unsigned int TexState[I830_TEXTURE_COUNT][I830_TEX_SETUP_SIZE];
- unsigned int TexBlendState[I830_TEXBLEND_COUNT][I830_TEXBLEND_SIZE];
- unsigned int TexBlendStateWordsUsed[I830_TEXBLEND_COUNT];
- unsigned int Palette[2][256];
- unsigned int dirty;
-
- unsigned int nbox;
- struct drm_clip_rect boxes[I830_NR_SAREA_CLIPRECTS];
-
- /* Maintain an LRU of contiguous regions of texture space. If
- * you think you own a region of texture memory, and it has an
- * age different to the one you set, then you are mistaken and
- * it has been stolen by another client. If global texAge
- * hasn't changed, there is no need to walk the list.
- *
- * These regions can be used as a proxy for the fine-grained
- * texture information of other clients - by maintaining them
- * in the same lru which is used to age their own textures,
- * clients have an approximate lru for the whole of global
- * texture space, and can make informed decisions as to which
- * areas to kick out. There is no need to choose whether to
- * kick out your own texture or someone else's - simply eject
- * them all in LRU order.
- */
-
- drm_i830_tex_region_t texList[I830_NR_TEX_REGIONS + 1];
- /* Last elt is sentinal */
- int texAge; /* last time texture was uploaded */
- int last_enqueue; /* last time a buffer was enqueued */
- int last_dispatch; /* age of the most recently dispatched buffer */
- int last_quiescent; /* */
- int ctxOwner; /* last context to upload state */
-
- int vertex_prim;
-
- int pf_enabled; /* is pageflipping allowed? */
- int pf_active;
- int pf_current_page; /* which buffer is being displayed? */
-
- int perf_boxes; /* performance boxes to be displayed */
-
- /* Here's the state for texunits 2,3:
- */
- unsigned int TexState2[I830_TEX_SETUP_SIZE];
- unsigned int TexBlendState2[I830_TEXBLEND_SIZE];
- unsigned int TexBlendStateWordsUsed2;
-
- unsigned int TexState3[I830_TEX_SETUP_SIZE];
- unsigned int TexBlendState3[I830_TEXBLEND_SIZE];
- unsigned int TexBlendStateWordsUsed3;
-
- unsigned int StippleState[I830_STP_SETUP_SIZE];
-} drm_i830_sarea_t;
-
-/* Flags for perf_boxes
- */
-#define I830_BOX_RING_EMPTY 0x1 /* populated by kernel */
-#define I830_BOX_FLIP 0x2 /* populated by kernel */
-#define I830_BOX_WAIT 0x4 /* populated by kernel & client */
-#define I830_BOX_TEXTURE_LOAD 0x8 /* populated by kernel */
-#define I830_BOX_LOST_CONTEXT 0x10 /* populated by client */
-
-/* I830 specific ioctls
- * The device specific ioctl range is 0x40 to 0x79.
- */
-#define DRM_I830_INIT 0x00
-#define DRM_I830_VERTEX 0x01
-#define DRM_I830_CLEAR 0x02
-#define DRM_I830_FLUSH 0x03
-#define DRM_I830_GETAGE 0x04
-#define DRM_I830_GETBUF 0x05
-#define DRM_I830_SWAP 0x06
-#define DRM_I830_COPY 0x07
-#define DRM_I830_DOCOPY 0x08
-#define DRM_I830_FLIP 0x09
-#define DRM_I830_IRQ_EMIT 0x0a
-#define DRM_I830_IRQ_WAIT 0x0b
-#define DRM_I830_GETPARAM 0x0c
-#define DRM_I830_SETPARAM 0x0d
-
-#define DRM_IOCTL_I830_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_INIT, drm_i830_init_t)
-#define DRM_IOCTL_I830_VERTEX DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_VERTEX, drm_i830_vertex_t)
-#define DRM_IOCTL_I830_CLEAR DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_CLEAR, drm_i830_clear_t)
-#define DRM_IOCTL_I830_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_FLUSH)
-#define DRM_IOCTL_I830_GETAGE DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_GETAGE)
-#define DRM_IOCTL_I830_GETBUF DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_GETBUF, drm_i830_dma_t)
-#define DRM_IOCTL_I830_SWAP DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_SWAP)
-#define DRM_IOCTL_I830_COPY DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_COPY, drm_i830_copy_t)
-#define DRM_IOCTL_I830_DOCOPY DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_DOCOPY)
-#define DRM_IOCTL_I830_FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_FLIP)
-#define DRM_IOCTL_I830_IRQ_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_IRQ_EMIT, drm_i830_irq_emit_t)
-#define DRM_IOCTL_I830_IRQ_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_IRQ_WAIT, drm_i830_irq_wait_t)
-#define DRM_IOCTL_I830_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_GETPARAM, drm_i830_getparam_t)
-#define DRM_IOCTL_I830_SETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_SETPARAM, drm_i830_setparam_t)
-
-typedef struct _drm_i830_clear {
- int clear_color;
- int clear_depth;
- int flags;
- unsigned int clear_colormask;
- unsigned int clear_depthmask;
-} drm_i830_clear_t;
-
-/* These may be placeholders if we have more cliprects than
- * I830_NR_SAREA_CLIPRECTS. In that case, the client sets discard to
- * false, indicating that the buffer will be dispatched again with a
- * new set of cliprects.
- */
-typedef struct _drm_i830_vertex {
- int idx; /* buffer index */
- int used; /* nr bytes in use */
- int discard; /* client is finished with the buffer? */
-} drm_i830_vertex_t;
-
-typedef struct _drm_i830_copy_t {
- int idx; /* buffer index */
- int used; /* nr bytes in use */
- void *address; /* Address to copy from */
-} drm_i830_copy_t;
-
-typedef struct drm_i830_dma {
- void *virtual;
- int request_idx;
- int request_size;
- int granted;
-} drm_i830_dma_t;
-
-/* 1.3: Userspace can request & wait on irq's:
- */
-typedef struct drm_i830_irq_emit {
- int *irq_seq;
-} drm_i830_irq_emit_t;
-
-typedef struct drm_i830_irq_wait {
- int irq_seq;
-} drm_i830_irq_wait_t;
-
-/* 1.3: New ioctl to query kernel params:
- */
-#define I830_PARAM_IRQ_ACTIVE 1
-
-typedef struct drm_i830_getparam {
- int param;
- int *value;
-} drm_i830_getparam_t;
-
-/* 1.3: New ioctl to set kernel params:
- */
-#define I830_SETPARAM_USE_MI_BATCHBUFFER_START 1
-
-typedef struct drm_i830_setparam {
- int param;
- int value;
-} drm_i830_setparam_t;
-
-#endif /* _I830_DRM_H_ */
--
2.0.2
More information about the dri-devel
mailing list