[PATCH v5 01/12] drm/exynos: add Exynos5433 decon driver

[Hyungwon Hwang]

Dear Varka Bhadram,

On Fri, 10 Apr 2015 11:35:02 +0530
Varka Bhadram <varkabhadram at gmail.com> wrote:

> On 04/10/2015 11:25 AM, Hyungwon Hwang wrote:
> 
> > From: Joonyoung Shim <jy0922.shim at samsung.com>
> >
> > DECON(Display and Enhancement Controller) is new IP replacing FIMD
> > in Exynos5433. This patch adds Exynos5433 decon driver.
> >
> > Signed-off-by: Joonyoung Shim <jy0922.shim at samsung.com>
> > Signed-off-by: Hyungwon Hwang <human.hwang at samsung.com>
> > ---
> > Changes for v2:
> > - change file names and variable names of decon to represnt
> > exynos5433 instead of exynos to distinguish them from exynos7 decon
> >
> > Changes for v3:
> > - fail fast when the proper image format is not set
> > - remove unnecessary checking code
> > - add and modify the function to make DPMS work well
> >
> > Changes for v4:
> > - rebased to exynos-drm-next with the clean-up patchset by Gustavo
> > Padovan.
> >
> > Changes for v5:
> > - None
> >  .../devicetree/bindings/video/exynos5433-decon.txt |  65 +++
> >  drivers/gpu/drm/exynos/Kconfig                     |   6 +
> >  drivers/gpu/drm/exynos/Makefile                    |   1 +
> >  drivers/gpu/drm/exynos/exynos5433_drm_decon.c      | 617
> > +++++++++++++++++++++
> > drivers/gpu/drm/exynos/exynos_drm_drv.c            |   3 +
> > drivers/gpu/drm/exynos/exynos_drm_drv.h            |   1 +
> > include/video/exynos5433_decon.h                   | 163 ++++++ 7
> > files changed, 856 insertions(+) create mode 100644
> > Documentation/devicetree/bindings/video/exynos5433-decon.txt create
> > mode 100644 drivers/gpu/drm/exynos/exynos5433_drm_decon.c create
> > mode 100644 include/video/exynos5433_decon.h
> >
> (...)
> 
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	if (!res) {
> > +		dev_err(dev, "cannot find IO resource\n");
> > +		return -ENXIO;
> > +	}
> > +
> 
> Remove the above check. Check one *res* will be done by
> *devm_ioremap_resource()*

OK.

> 
> > +	ctx->addr = devm_ioremap_resource(dev, res);
> > +	if (IS_ERR(ctx->addr)) {
> > +		dev_err(dev, "ioremap failed\n");
> > +		return PTR_ERR(ctx->addr);
> > +	}
> > +
> > +	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
> > +			ctx->i80_if ? "lcd_sys" : "vsync");
> > +	if (!res) {
> > +		dev_err(dev, "cannot find IRQ resource\n");
> > +		return -ENXIO;
> > +	}
> > +
> > +	ret = devm_request_irq(dev, res->start, ctx->i80_if ?
> > +			decon_lcd_sys_irq_handler :
> > decon_vsync_irq_handler, 0,
> > +			"drm_decon", ctx);
> > +	if (ret < 0) {
> > +		dev_err(dev, "lcd_sys irq request failed\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = exynos_drm_component_add(dev,
> > EXYNOS_DEVICE_TYPE_CRTC,
> > +				       EXYNOS_DISPLAY_TYPE_LCD);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	platform_set_drvdata(pdev, ctx);
> > +
> > +	ret = component_add(dev, &decon_component_ops);
> > +	if (ret < 0) {
> > +		exynos_drm_component_del(dev,
> > EXYNOS_DEVICE_TYPE_CRTC);
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int exynos5433_decon_remove(struct platform_device *pdev)
> > +{
> > +	component_del(&pdev->dev, &decon_component_ops);
> > +	exynos_drm_component_del(&pdev->dev,
> > EXYNOS_DEVICE_TYPE_CRTC); +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id
> > exynos5433_decon_driver_dt_match[] = {
> > +	{ .compatible = "samsung,exynos5433-decon" },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, exynos5433_decon_driver_dt_match);
> > +
> > +struct platform_driver exynos5433_decon_driver = {
> > +	.probe		= exynos5433_decon_probe,
> > +	.remove		= exynos5433_decon_remove,
> > +	.driver		= {
> > +		.name	= "exynos5433-decon",
> > +		.owner	= THIS_MODULE,
> 
> Remove this field. It will be updated by platform core.
> 

OK.

Thanks for your review.

Best regards,
Hyungwon Hwang

> > +		.of_match_table = exynos5433_decon_driver_dt_match,
> > +	},
> > +};
>