[PATCH 4/7] drm/fsl-dcu: handle initialization errors properly

Stefan Agner stefan at agner.ch
Wed Nov 18 18:42:47 PST 2015


If initialization fails (e.g. due to missing panel node or deferred
probe) make sure to roll-back all operations and return the error
code.

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c
index 0ef5959..c564ec6 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c
@@ -25,6 +25,8 @@ static const struct drm_mode_config_funcs fsl_dcu_drm_mode_config_funcs = {
 
 int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev)
 {
+	int ret;
+
 	drm_mode_config_init(fsl_dev->drm);
 
 	fsl_dev->drm->mode_config.min_width = 0;
@@ -33,11 +35,25 @@ int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev)
 	fsl_dev->drm->mode_config.max_height = 2047;
 	fsl_dev->drm->mode_config.funcs = &fsl_dcu_drm_mode_config_funcs;
 
-	drm_kms_helper_poll_init(fsl_dev->drm);
-	fsl_dcu_drm_crtc_create(fsl_dev);
-	fsl_dcu_drm_encoder_create(fsl_dev, &fsl_dev->crtc);
-	fsl_dcu_drm_connector_create(fsl_dev, &fsl_dev->encoder);
+	ret = fsl_dcu_drm_crtc_create(fsl_dev);
+	if (ret)
+		return ret;
+
+	ret = fsl_dcu_drm_encoder_create(fsl_dev, &fsl_dev->crtc);
+	if (ret)
+		goto fail_encoder;
+
+	ret = fsl_dcu_drm_connector_create(fsl_dev, &fsl_dev->encoder);
+	if (ret)
+		goto fail_connector;
+
 	drm_mode_config_reset(fsl_dev->drm);
+	drm_kms_helper_poll_init(fsl_dev->drm);
 
 	return 0;
+fail_encoder:
+	fsl_dev->crtc.funcs->destroy(&fsl_dev->crtc);
+fail_connector:
+	fsl_dev->encoder.funcs->destroy(&fsl_dev->encoder);
+	return ret;
 }
-- 
2.6.2



More information about the dri-devel mailing list