[PATCH v6 10/17] phy: Add driver for rockchip Display Port PHY

Yakir Yang ykk at rock-chips.com
Mon Oct 12 18:20:01 PDT 2015


Hi Kishon

On 10/12/2015 11:02 PM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Saturday 10 October 2015 09:25 PM, Yakir Yang wrote:
>> This phy driver would control the Rockchip DisplayPort module
>> phy clock and phy power, it is relate to analogix_dp-rockchip
>> dp driver. If you want DP works rightly on rockchip platform,
>> then you should select both of them.
> Add phy driver for the Rockchip DisplayPort PHY module. This is required
> to get DisplayPort working in Rockchip SoCs.

Thanks, take point.

>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>> ---
>> Changes in v6: None
>> Changes in v5:
>> - Remove "reg" DT property, cause driver could poweron/poweroff phy via
>>    the exist "grf" syscon already. And rename the example DT node from
>>    "edp_phy: phy at ff770274" to "edp_phy: edp-phy" directly. (Heiko)
>> - Add deivce_node at the front of driver, update phy_ops type from "static
>>    struct" to "static const struct". And correct the input paramters of
>>    devm_phy_create() interfaces. (Heiko)
>>
>> Changes in v4:
>> - Add commit message, and remove the redundant rockchip_dp_phy_init()
>>    function, move those code to probe() method. And remove driver .owner
>>    number. (Kishon)
>>
>> Changes in v3:
>> - Suggest, add rockchip dp phy driver, collect the phy clocks and
>>    power control. (Heiko)
>>
>> Changes in v2: None
>>
>>   drivers/phy/Kconfig           |   7 ++
>>   drivers/phy/Makefile          |   1 +
>>   drivers/phy/phy-rockchip-dp.c | 151 ++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 159 insertions(+)
>>   create mode 100644 drivers/phy/phy-rockchip-dp.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 47da573..8f2bc4f 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -310,6 +310,13 @@ config PHY_ROCKCHIP_USB
>>   	help
>>   	  Enable this to support the Rockchip USB 2.0 PHY.
>>   
>> +config PHY_ROCKCHIP_DP
>> +	tristate "Rockchip Display Port PHY Driver"
>> +	depends on ARCH_ROCKCHIP && OF
>> +	select GENERIC_PHY
>> +	help
>> +	  Enable this to support the Rockchip Display Port PHY.
>> +
>>   config PHY_ST_SPEAR1310_MIPHY
>>   	tristate "ST SPEAR1310-MIPHY driver"
>>   	select GENERIC_PHY
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index a5b18c1..e281f35 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -34,6 +34,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
>>   obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
>>   obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
>>   obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
>> +obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
>>   obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
>>   obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
>>   obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
>> diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
>> new file mode 100644
>> index 0000000..3a2ac120
>> --- /dev/null
>> +++ b/drivers/phy/phy-rockchip-dp.c
>> @@ -0,0 +1,151 @@
>> +/*
>> + * Rockchip DP PHY driver
>> + *
>> + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
>> + * Author: Yakir Yang <ykk@@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License.
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/clk.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/regmap.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define GRF_SOC_CON12                   0x0274
>> +#define GRF_EDP_REF_CLK_SEL_INTER	BIT(4)
>> +#define GRF_EDP_PHY_SIDDQ_WRITE_EN      BIT(21)
>> +#define GRF_EDP_PHY_SIDDQ_ON            0
>> +#define GRF_EDP_PHY_SIDDQ_OFF           BIT(5)
>> +
>> +struct rockchip_dp_phy {
>> +	struct device  *dev;
>> +	struct regmap  *grf;
>> +	struct clk     *phy_24m;
>> +};
>> +
>> +static int rockchip_set_phy_state(struct phy *phy, bool enable)
>> +{
>> +	struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
>> +	int ret;
>> +
>> +	if (enable) {
>> +		ret = clk_prepare_enable(dp->phy_24m);
>> +		if (ret < 0) {
>> +			dev_err(dp->dev, "Can't enable clock 24m %d\n", ret);
>> +			return ret;
>> +		}
>> +
>> +		ret = regmap_write(dp->grf, GRF_SOC_CON12,
>> +				   GRF_EDP_PHY_SIDDQ_WRITE_EN |
>> +				   GRF_EDP_PHY_SIDDQ_ON);
>> +	} else {
>> +		clk_disable_unprepare(dp->phy_24m);
> should clk_disable come after regmap_write? It'll be symmetric to enable?

I don't see there is a strict limit about this, but thanks for your point, I
would like to change this order to:

     if (enable) {
         // Enable SIDDQ power
         // Enable Clock
     } else {
         // Disable Clock
         // Disable SIDDQ power
     }

>> +		ret = regmap_write(dp->grf, GRF_SOC_CON12,
>> +				   GRF_EDP_PHY_SIDDQ_WRITE_EN |
>> +				   GRF_EDP_PHY_SIDDQ_OFF);
> Is this syscon register used only by Display Port PHY? Better to use
> regmap_update API?

Thanks to Heiko explain, writing you actually need to set the
write-enable bit, some kind of hardware regmap_update.


Thanks,
- Yakir

> Thanks
> Kishon
>
>
>




More information about the dri-devel mailing list