[PATCH 10/10] drm/exynos/decon5433: add support for DECON-TV
Andrzej Hajda
a.hajda at samsung.com
Fri Oct 23 06:03:11 PDT 2015
On 10/23/2015 01:55 PM, Inki Dae wrote:
> Hi Andrzej,
>
>
> 2015년 10월 20일 18:22에 Andrzej Hajda 이(가) 쓴 글:
>> DECON-TV IP is responsible for generating video stream which is transferred
>> to HDMI IP. It is almost fully compatible with DECON IP.
>>
>> The patch is based on initial work of Hyungwon Hwang.
>>
>> Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
>> ---
>> drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 154 ++++++++++++++++----------
>> include/video/exynos5433_decon.h | 29 +++++
>> 2 files changed, 122 insertions(+), 61 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
>> index 3c9aa4e..fbe1b31 100644
>> --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
>> +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
>> @@ -13,6 +13,7 @@
>> #include <linux/platform_device.h>
>> #include <linux/clk.h>
>> #include <linux/component.h>
>> +#include <linux/of_device.h>
>> #include <linux/of_gpio.h>
>> #include <linux/pm_runtime.h>
>>
>> @@ -37,6 +38,12 @@ static const char * const decon_clks_name[] = {
>> "sclk_decon_eclk",
>> };
>>
>> +enum decon_iftype {
>> + IFTYPE_RGB,
>> + IFTYPE_I80,
>> + IFTYPE_HDMI
>> +};
>> +
>> enum decon_flag_bits {
>> BIT_CLKS_ENABLED,
>> BIT_IRQS_ENABLED,
>> @@ -53,7 +60,8 @@ struct decon_context {
>> struct clk *clks[ARRAY_SIZE(decon_clks_name)];
>> int pipe;
>> unsigned long flags;
>> - bool i80_if;
>> + enum decon_iftype out_type;
>> + int first_win;
>> };
>>
>> static const uint32_t decon_formats[] = {
>> @@ -80,7 +88,7 @@ static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
>>
>> if (test_and_set_bit(BIT_IRQS_ENABLED, &ctx->flags)) {
>> val = VIDINTCON0_INTEN;
>> - if (ctx->i80_if)
>> + if (ctx->out_type == IFTYPE_I80)
>> val |= VIDINTCON0_FRAMEDONE;
>> else
>> val |= VIDINTCON0_INTFRMEN;
>> @@ -104,8 +112,11 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc)
>>
>> static void decon_setup_trigger(struct decon_context *ctx)
>> {
>> - u32 val = TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
>> - TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN;
>> + u32 val = (ctx->out_type != IFTYPE_HDMI)
>> + ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
>> + TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN
>> + : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
>> + TRIGCON_HWTRIGMASK_I80_RGB | TRIGCON_HWTRIGEN_I80_RGB;
>> writel(val, ctx->addr + DECON_TRIGCON);
>> }
>>
>> @@ -118,13 +129,22 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
>> if (test_bit(BIT_SUSPENDED, &ctx->flags))
>> return;
>>
>> + if (ctx->out_type == IFTYPE_HDMI) {
>> + m->crtc_hsync_start = m->crtc_hdisplay + 10;
>> + m->crtc_hsync_end = m->crtc_htotal - 92;
>> + m->crtc_vsync_start = m->crtc_vdisplay + 1;
>> + m->crtc_vsync_end = m->crtc_vsync_start + 1;
>> + }
>> +
>> + decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID, 0);
>> +
>> /* enable clock gate */
>> val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F;
>> writel(val, ctx->addr + DECON_CMU);
>>
>> /* lcd on and use command if */
>> val = VIDOUT_LCD_ON;
>> - if (ctx->i80_if)
>> + if (ctx->out_type == IFTYPE_I80)
>> val |= VIDOUT_COMMAND_IF;
>> else
>> val |= VIDOUT_RGB_IF;
>> @@ -134,7 +154,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
>> VIDTCON2_HOZVAL(m->hdisplay - 1);
>> writel(val, ctx->addr + DECON_VIDTCON2);
>>
>> - if (!ctx->i80_if) {
>> + if (ctx->out_type != IFTYPE_I80) {
>> val = VIDTCON00_VBPD_F(
>> m->crtc_vtotal - m->crtc_vsync_end - 1) |
>> VIDTCON00_VFPD_F(
>> @@ -159,15 +179,9 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
>> decon_setup_trigger(ctx);
>>
>> /* enable output and display signal */
>> - val = VIDCON0_ENVID | VIDCON0_ENVID_F;
>> - writel(val, ctx->addr + DECON_VIDCON0);
>> + decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0);
>> }
>>
>> -#define COORDINATE_X(x) (((x) & 0xfff) << 12)
>> -#define COORDINATE_Y(x) ((x) & 0xfff)
>> -#define OFFSIZE(x) (((x) & 0x3fff) << 14)
>> -#define PAGEWIDTH(x) ((x) & 0x3fff)
>> -
>> static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win,
>> struct drm_framebuffer *fb)
>> {
>> @@ -238,6 +252,10 @@ static void decon_atomic_begin(struct exynos_drm_crtc *crtc,
>> decon_shadow_protect_win(ctx, plane->zpos, true);
>> }
>>
>> +#define BIT_VAL(x, e, s) (((x) & ((1 << ((e) - (s) + 1)) - 1)) << (s))
>> +#define COORDINATE_X(x) BIT_VAL((x), 23, 12)
>> +#define COORDINATE_Y(x) BIT_VAL((x), 11, 0)
>> +
>> static void decon_update_plane(struct exynos_drm_crtc *crtc,
>> struct exynos_drm_plane *plane)
>> {
>> @@ -271,8 +289,12 @@ static void decon_update_plane(struct exynos_drm_crtc *crtc,
>> val = plane->dma_addr[0] + pitch * plane->crtc_h;
>> writel(val, ctx->addr + DECON_VIDW0xADD1B0(win));
>>
>> - val = OFFSIZE(pitch - plane->crtc_w * bpp)
>> - | PAGEWIDTH(plane->crtc_w * bpp);
>> + if (ctx->out_type != IFTYPE_HDMI)
>> + val = BIT_VAL(pitch - plane->crtc_w * bpp, 27, 14)
>> + | BIT_VAL(plane->crtc_w * bpp, 13, 0);
>> + else
>> + val = BIT_VAL(pitch - plane->crtc_w * bpp, 29, 15)
>> + | BIT_VAL(plane->crtc_w * bpp, 14, 0);
>> writel(val, ctx->addr + DECON_VIDW0xADD2(win));
>>
>> decon_win_set_pixfmt(ctx, win, state->fb);
>> @@ -314,7 +336,7 @@ static void decon_atomic_flush(struct exynos_drm_crtc *crtc,
>>
>> decon_shadow_protect_win(ctx, plane->zpos, false);
>>
>> - if (ctx->i80_if)
>> + if (ctx->out_type == IFTYPE_I80)
>> set_bit(BIT_WIN_UPDATED, &ctx->flags);
>> }
>>
>> @@ -339,6 +361,17 @@ static void decon_swreset(struct decon_context *ctx)
>> }
>>
>> WARN(tries == 0, "failed to software reset DECON\n");
>> +
>> + if (ctx->out_type != IFTYPE_HDMI)
>> + return;
>> +
>> + writel(VIDCON0_CLKVALUP | VIDCON0_VLCKFREE, ctx->addr + DECON_VIDCON0);
>> + decon_set_bits(ctx, DECON_CMU,
>> + CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F, ~0);
>> + writel(VIDCON1_VCLK_RUN_VDEN_DISABLE, ctx->addr + DECON_VIDCON1);
>> + writel(CRCCTRL_CRCEN | CRCCTRL_CRCSTART_F | CRCCTRL_CRCCLKEN,
>> + ctx->addr + DECON_CRCCTRL);
>> + decon_setup_trigger(ctx);
>> }
>>
>> static void decon_enable(struct exynos_drm_crtc *crtc)
>> @@ -387,7 +420,7 @@ static void decon_disable(struct exynos_drm_crtc *crtc)
>> * suspend that connector. Otherwise we might try to scan from
>> * a destroyed buffer later.
>> */
>> - for (i = 0; i < WINDOWS_NR; i++)
>> + for (i = ctx->first_win; i < WINDOWS_NR; i++)
>> decon_disable_plane(crtc, &ctx->planes[i]);
>>
>> decon_swreset(ctx);
>> @@ -461,25 +494,30 @@ static int decon_bind(struct device *dev, struct device *master, void *data)
>> struct drm_device *drm_dev = data;
>> struct exynos_drm_private *priv = drm_dev->dev_private;
>> struct exynos_drm_plane *exynos_plane;
>> + enum exynos_drm_output_type out_type;
>> enum drm_plane_type type;
>> - unsigned int zpos;
>> + unsigned int win;
>> int ret;
>>
>> ctx->drm_dev = drm_dev;
>> ctx->pipe = priv->pipe++;
>>
>> - for (zpos = 0; zpos < WINDOWS_NR; zpos++) {
>> - type = exynos_plane_get_type(zpos, CURSOR_WIN);
>> - ret = exynos_plane_init(drm_dev, &ctx->planes[zpos],
>> + for (win = ctx->first_win; win < WINDOWS_NR; win++) {
>> + int tmp = (win == ctx->first_win) ? 0 : win;
> AFAIK, DECON TV for Exynos5433 SoC has four hardware overlays so I guess
> you used ctx->first_win to initialize four planes in case of IFTYPE_HDMI.
>
> However, with IFTYPE_HDMI ctx->first_win has 1, as a result,
> ctx->planes[] will have 0, 2nd, 3rd and 4th planes and this means we
> should use 0, 2nd ~ 4th hardware overlay excepting 1st overlay. Is this
> your intention?
> Shouldn't ctx->planes[] have 1st, 2nd ,3rd and 4th planes so that we can
> use 1st ~ 4th hardware overlay for DECON TV?
>
> DECON TV for Exynos5433 SoC can use only 1st ~ 4th hardware overlays.
>
> And other thing, it may be trivial but I think it'd be better to use
> 'ovl' instead of 'tmp.
DECON-TV has hardware window 0 with very limited functionality,
it is just background color, no scanout buffers. So it cannot be used
as drm plane. ctx->first_win contains value of the 1st valid window.
There is a question how to map windows to planes. I have chosen
the simplest solution - n'th hw window is mapped to n'th plane and have
zpos==n. The only problem is with function exynos_plane_get_type,
which returns DRM_PLANE_TYPE_PRIMARY only if their 1st argument is equal 0,
ie it assumes default window is always 0.
As an simple workaround I used 'tmp' variable which maps 1st window to 0.
This way exynos_plane_get_type returns expected value for all windows.
I plan replace this workaround with something nicer, but as it would involve
changes in other drivers I left this as TODO for later.
Regarding ctx->planes[], it is static array so it will have always one entry
invalid in case of TV, with this approach it will be th 0th entry, but with a gain
of consistency in windows/zpos/planes numbering.
If you prefer different approach please let me know.
Regards
Andrzej
>
> Thanks,
> Inki Dae
>
More information about the dri-devel
mailing list