[PATCH 03/11] drm/i915: Mark debug mod options as _unsafe

Jani Nikula jani.nikula at linux.intel.com
Tue Sep 22 02:34:23 PDT 2015


On Tue, 08 Sep 2015, Daniel Vetter <daniel.vetter at ffwll.ch> wrote:
> We don't want random people to touch these.
>
> Especially true since we've just screwed up SKL by holding it way too
> long under the preliminary flag because of some ABI issues. And now
> there's howtos all over the internets about how to set this. Same
> pretty much for anything else.
>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>


> ---
>  drivers/gpu/drm/i915/i915_params.c | 30 +++++++++++++++---------------
>  1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
> index 05053e2e9ff0..39a8f560fad7 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -62,7 +62,7 @@ MODULE_PARM_DESC(modeset,
>  	"Use kernel modesetting [KMS] (0=disable, "
>  	"1=on, -1=force vga console preference [default])");
>  
> -module_param_named(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
> +module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
>  MODULE_PARM_DESC(panel_ignore_lid,
>  	"Override lid status (0=autodetect, 1=autodetect disabled [default], "
>  	"-1=force lid closed, -2=force lid open)");
> @@ -85,17 +85,17 @@ MODULE_PARM_DESC(enable_fbc,
>  	"Enable frame buffer compression for power savings "
>  	"(default: -1 (use per-chip default))");
>  
> -module_param_named(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
> +module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
>  MODULE_PARM_DESC(lvds_channel_mode,
>  	 "Specify LVDS channel mode "
>  	 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
>  
> -module_param_named(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
> +module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
>  MODULE_PARM_DESC(lvds_use_ssc,
>  	"Use Spread Spectrum Clock with panels [LVDS/eDP] "
>  	"(default: auto from VBT)");
>  
> -module_param_named(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
> +module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
>  MODULE_PARM_DESC(vbt_sdvo_panel_type,
>  	"Override/Ignore selection of SDVO panel mode in the VBT "
>  	"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
> @@ -103,7 +103,7 @@ MODULE_PARM_DESC(vbt_sdvo_panel_type,
>  module_param_named_unsafe(reset, i915.reset, bool, 0600);
>  MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
>  
> -module_param_named(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
> +module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
>  MODULE_PARM_DESC(enable_hangcheck,
>  	"Periodically check GPU activity for detecting hangs. "
>  	"WARNING: Disabling this can cause system wide hangs. "
> @@ -114,26 +114,26 @@ MODULE_PARM_DESC(enable_ppgtt,
>  	"Override PPGTT usage. "
>  	"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
>  
> -module_param_named(enable_execlists, i915.enable_execlists, int, 0400);
> +module_param_named_unsafe(enable_execlists, i915.enable_execlists, int, 0400);
>  MODULE_PARM_DESC(enable_execlists,
>  	"Override execlists usage. "
>  	"(-1=auto [default], 0=disabled, 1=enabled)");
>  
> -module_param_named(enable_psr, i915.enable_psr, int, 0600);
> +module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);
>  MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
>  
> -module_param_named(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
> +module_param_named_unsafe(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
>  MODULE_PARM_DESC(preliminary_hw_support,
>  	"Enable preliminary hardware support.");
>  
> -module_param_named(disable_power_well, i915.disable_power_well, int, 0600);
> +module_param_named_unsafe(disable_power_well, i915.disable_power_well, int, 0600);
>  MODULE_PARM_DESC(disable_power_well,
>  	"Disable the power well when possible (default: true)");
>  
> -module_param_named(enable_ips, i915.enable_ips, int, 0600);
> +module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600);
>  MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
>  
> -module_param_named(fastboot, i915.fastboot, bool, 0600);
> +module_param_named_unsafe(fastboot, i915.fastboot, bool, 0600);
>  MODULE_PARM_DESC(fastboot,
>  	"Try to skip unnecessary mode sets at boot time (default: false)");
>  
> @@ -147,7 +147,7 @@ MODULE_PARM_DESC(load_detect_test,
>  	"Force-enable the VGA load detect code for testing (default:false). "
>  	"For developers only.");
>  
> -module_param_named(invert_brightness, i915.invert_brightness, int, 0600);
> +module_param_named_unsafe(invert_brightness, i915.invert_brightness, int, 0600);
>  MODULE_PARM_DESC(invert_brightness,
>  	"Invert backlight brightness "
>  	"(-1 force normal, 0 machine defaults, 1 force inversion), please "
> @@ -158,14 +158,14 @@ MODULE_PARM_DESC(invert_brightness,
>  module_param_named(disable_display, i915.disable_display, bool, 0600);
>  MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
>  
> -module_param_named(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);
> +module_param_named_unsafe(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);
>  MODULE_PARM_DESC(disable_vtd_wa, "Disable all VT-d workarounds (default: false)");
>  
> -module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
> +module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
>  MODULE_PARM_DESC(enable_cmd_parser,
>  		 "Enable command parsing (1=enabled [default], 0=disabled)");
>  
> -module_param_named(use_mmio_flip, i915.use_mmio_flip, int, 0600);
> +module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, 0600);
>  MODULE_PARM_DESC(use_mmio_flip,
>  		 "use MMIO flips (-1=never, 0=driver discretion [default], 1=always)");
>  
> -- 
> 2.5.1
>

-- 
Jani Nikula, Intel Open Source Technology Center


More information about the dri-devel mailing list