[PATCH 2/5] drm/dp/mst: Calculate MST PBN with 31.32 fixed point

Harry Wentland harry.wentland at amd.com
Fri Jan 22 14:07:26 PST 2016


Our PBN value overflows the 20 bits integer part of the 20.12
fixed point. We need to use 31.32 fixed point to avoid this.

This happens with display clocks larger than 293122 (at 24 bpp),
which we see with the Sharp (and similar) 4k tiled displays.

Signed-off-by: Harry Wentland <harry.wentland at amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 67 ++++++++++++++++++++---------------
 1 file changed, 39 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 6ed90a2437e5..041597b7a7c6 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2605,32 +2605,31 @@ EXPORT_SYMBOL(drm_dp_check_act_status);
  */
 int drm_dp_calc_pbn_mode(int clock, int bpp)
 {
-	fixed20_12 pix_bw;
-	fixed20_12 fbpp;
-	fixed20_12 result;
-	fixed20_12 margin, tmp;
-	u32 res;
-
-	pix_bw.full = dfixed_const(clock);
-	fbpp.full = dfixed_const(bpp);
-	tmp.full = dfixed_const(8);
-	fbpp.full = dfixed_div(fbpp, tmp);
-
-	result.full = dfixed_mul(pix_bw, fbpp);
-	margin.full = dfixed_const(54);
-	tmp.full = dfixed_const(64);
-	margin.full = dfixed_div(margin, tmp);
-	result.full = dfixed_div(result, margin);
-
-	margin.full = dfixed_const(1006);
-	tmp.full = dfixed_const(1000);
-	margin.full = dfixed_div(margin, tmp);
-	result.full = dfixed_mul(result, margin);
-
-	result.full = dfixed_div(result, tmp);
-	result.full = dfixed_ceil(result);
-	res = dfixed_trunc(result);
-	return res;
+	u64 kbps;
+	s64 peak_kbps;
+	u32 numerator;
+	u32 denominator;
+
+	kbps = clock * bpp;
+
+	/*
+	 * margin 5300ppm + 300ppm ~ 0.6% as per spec, factor is 1.006
+	 * The unit of 54/64Mbytes/sec is an arbitrary unit chosen based on
+	 * common multiplier to render an integer PBN for all link rate/lane
+	 * counts combinations
+	 * calculate
+	 * peak_kbps *= (1006/1000)
+	 * peak_kbps *= (64/54)
+	 * peak_kbps *= 8    convert to bytes
+	 */
+
+	numerator = 64 * 1006;
+	denominator = 54 * 8 * 1000 * 1000;
+
+	kbps *= numerator;
+	peak_kbps = drm_fixp_from_fraction(kbps, denominator);
+
+	return drm_fixp2int_ceil(peak_kbps);
 }
 EXPORT_SYMBOL(drm_dp_calc_pbn_mode);
 
@@ -2638,11 +2637,23 @@ static int test_calc_pbn_mode(void)
 {
 	int ret;
 	ret = drm_dp_calc_pbn_mode(154000, 30);
-	if (ret != 689)
+	if (ret != 689) {
+		DRM_ERROR("PBN calculation test failed - clock %d, bpp %d, expected PBN %d, actual PBN %d.\n",
+				154000, 30, 689, ret);
 		return -EINVAL;
+	}
 	ret = drm_dp_calc_pbn_mode(234000, 30);
-	if (ret != 1047)
+	if (ret != 1047) {
+		DRM_ERROR("PBN calculation test failed - clock %d, bpp %d, expected PBN %d, actual PBN %d.\n",
+				234000, 30, 1047, ret);
 		return -EINVAL;
+	}
+	ret = drm_dp_calc_pbn_mode(297000, 24);
+	if (ret != 1063) {
+		DRM_ERROR("PBN calculation test failed - clock %d, bpp %d, expected PBN %d, actual PBN %d.\n",
+				297000, 24, 1063, ret);
+		return -EINVAL;
+	}
 	return 0;
 }
 
-- 
2.1.4



More information about the dri-devel mailing list