[PATCHv2 1/2] dt-bindings: adi,adv7511.txt: document cec clock

[Hans Verkuil]

On 09/19/17 12:42, Sergei Shtylyov wrote:
> On 9/19/2017 1:35 PM, Hans Verkuil wrote:
> 
>>>>>>>> From: Hans Verkuil <hans.verkuil at cisco.com>
>>>>>>>>
>>>>>>>> Document the cec clock binding.
>>>>>>>>
>>>>>>>> Signed-off-by: Hans Verkuil <hans.verkuil at cisco.com>
>>>>>>>> Acked-by: Rob Herring <robh at kernel.org>
>>>>>>>> ---
>>>>>>>>      Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 4 ++++
>>>>>>>>      1 file changed, 4 insertions(+)
>>>>>>>>
>>>>>>>> diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
>>>>>>>> index 06668bca7ffc..4497ae054d49 100644
>>>>>>>> --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
>>>>>>>> +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
>>>>>>>> @@ -68,6 +68,8 @@ Optional properties:
>>>>>>>>      - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
>>>>>>>>        generator. The chip will rely on the sync signals in the DSI data lanes,
>>>>>>>>        rather than generate its own timings for HDMI output.
>>>>>>>> +- clocks: from common clock binding: handle to CEC clock.
>>>>>>>
>>>>>>>        It's called "phandle" in the DT speak. :-)
>>>>>>>        Are you sure the clock specifier would always be absent?
>>>>>>
>>>>>> Sorry? I don't understand the question. Did you mean: "can be absent?"?
>>>>>
>>>>>       No, you only say that there'll be the clock phandle only. The clock
>>>>> specifier may follow the phandle for the clock devices that have
>>>>> "#clock-cells" prop != 0.
>>>>
>>>> I have to say that I just copy-and-pasted this from other bindings.
>>>
>>>      :-)
>>>
>>>> Would this be better?
>>>>
>>>> - clocks: list of clock specifiers, corresponding to entries in
>>>>     the clock-names property;
>>>
>>>      Didn't you say that there'll be only one clock, "cec"? If so, there's
>>> gonna  be a single clock phandle+specifier pair. They always go in pairs. :-)
>>>
>>>> - clock-names: from common clock binding: must be "cec".
>>
>> - clocks: cec clock phandle, corresponding to the clock-names entry.
> 
>     The clock phandle and specifier.
> 
>> - clock-names: from common clock binding: must be "cec".
>>
>> This OK?
> 
>     Well, you seem to be going in circles, the above was almost the same as 
> the original prop description...

- clocks: from common clock binding: reference to the CEC clock.
- clock-names: from common clock binding: must be "cec".

This avoids the whole issue of having just a phandle or a phandle + specifier.

Regards,

	Hans