[[RFC]DPU PATCH 0/4] Add suppport for sn65dsi86 bridge chip and Innolux 2k edp panel driver

[Andrzej Hajda]

On 18.04.2018 14:19, Sandeep Panda wrote:
> Changelog:
>
> v3 -> v4:
> Current patchset separates out eDP panel specific resources from sn65dsi86
> bridge driver and creates a separate driver for the innloux edp panel.
>
> Now bridge driver check if any panel is attached or not to get the supported
> modes. If any panel is attached then query from panel driver to get the modes,
> or else probe the provided i2c adapter to read the modes from EDID.
>
> Removed hardcoding of bridge init sequence. With this patchset bridge driver now
> will program the init sequence based on the current mode set by drm framework.
>
> Current patchset is not tested on actual bridge chip/panel.

One more thing, could you use proper prefixes in subject:
- no double braces,
- patch version,
- no DPU,
- RFC up to you, but in case of driver which you want to eventually
merge it seems unnecessary.

So subject should look more or less like:
[PATCH v4 0/4] Add suppport for sn65dsi86 bridge chip and Innolux 2k edp
panel driver

Regards
Andrzej

>
> Sandeep Panda (4):
>   drm/bridge: add support for sn65dsi86 bridge driver
>   dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings
>   drm/panel: add Innolux TV123WAM eDP panel driver
>   dt-bindings: Add Innolux TV123WAM panel bindings
>
>  .../bindings/display/bridge/ti,sn65dsi86.txt       |  60 ++
>  .../display/panel/innolux,edp-2k-panel.txt         |  21 +
>  drivers/gpu/drm/bridge/ti-sn65dsi86.c              | 742 +++++++++++++++++++++
>  drivers/gpu/drm/panel/panel-innolux-tv123wam.c     | 299 +++++++++
>  4 files changed, 1122 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
>  create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
>  create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi86.c
>  create mode 100644 drivers/gpu/drm/panel/panel-innolux-tv123wam.c
>