[PATCH 2/2] drm: bridge: adv7511: Add support for ADV7535

Togorean, Bogdan Bogdan.Togorean at analog.com
Thu Aug 1 12:10:09 UTC 2019


Hi Laurent,

Thnk you for your review.

On Wed, 2019-07-31 at 12:14 +0300, Laurent Pinchart wrote:
> [External]
> 
> Hi Bogdan,
> 
> Thank you for the patch.
> 
> On Tue, Jul 30, 2019 at 04:17:36PM +0300, Bogdan Togorean wrote:
> > ADV7535 is a DSI to HDMI bridge chip like ADV7533 but it allows
> > 1080p at 60Hz. v1p2 is fixed to 1.8V on ADV7535 but on ADV7533 can be
> > 1.2V
> > or 1.8V and is configurable in a register.
> > 
> > Signed-off-by: Bogdan Togorean <bogdan.togorean at analog.com>
> > ---
> >  drivers/gpu/drm/bridge/adv7511/adv7511.h     |  2 ++
> >  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 31 +++++++++++++++-
> > ----
> >  2 files changed, 25 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > index 52b2adfdc877..702432615ec8 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > @@ -91,6 +91,7 @@
> >  #define ADV7511_REG_ARC_CTRL			0xdf
> >  #define ADV7511_REG_CEC_I2C_ADDR		0xe1
> >  #define ADV7511_REG_CEC_CTRL			0xe2
> > +#define ADV7511_REG_SUPPLY_SELECT		0xe4
> >  #define ADV7511_REG_CHIP_ID_HIGH		0xf5
> >  #define ADV7511_REG_CHIP_ID_LOW			0xf6
> >  
> > @@ -320,6 +321,7 @@ struct adv7511_video_config {
> >  enum adv7511_type {
> >  	ADV7511,
> >  	ADV7533,
> > +	ADV7535,
> >  };
> >  
> >  #define ADV7511_MAX_ADDRS 3
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > index f6d2681f6927..941072decb73 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > @@ -367,7 +367,7 @@ static void adv7511_power_on(struct adv7511
> > *adv7511)
> >  	 */
> >  	regcache_sync(adv7511->regmap);
> >  
> > -	if (adv7511->type == ADV7533)
> > +	if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> >  		adv7533_dsi_power_on(adv7511);
> >  	adv7511->powered = true;
> >  }
> > @@ -387,7 +387,7 @@ static void __adv7511_power_off(struct adv7511
> > *adv7511)
> >  static void adv7511_power_off(struct adv7511 *adv7511)
> >  {
> >  	__adv7511_power_off(adv7511);
> > -	if (adv7511->type == ADV7533)
> > +	if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> >  		adv7533_dsi_power_off(adv7511);
> >  	adv7511->powered = false;
> >  }
> > @@ -761,7 +761,7 @@ static void adv7511_mode_set(struct adv7511
> > *adv7511,
> >  	regmap_update_bits(adv7511->regmap, 0x17,
> >  		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
> >  
> > -	if (adv7511->type == ADV7533)
> > +	if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> >  		adv7533_mode_set(adv7511, adj_mode);
> >  
> >  	drm_mode_copy(&adv7511->curr_mode, adj_mode);
> > @@ -874,7 +874,7 @@ static int adv7511_bridge_attach(struct
> > drm_bridge *bridge)
> >  				 &adv7511_connector_helper_funcs);
> >  	drm_connector_attach_encoder(&adv->connector, bridge->encoder);
> >  
> > -	if (adv->type == ADV7533)
> > +	if (adv->type == ADV7533 || adv->type == ADV7535)
> >  		ret = adv7533_attach_dsi(adv);
> >  
> >  	if (adv->i2c_main->irq)
> > @@ -952,7 +952,7 @@ static bool
> > adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
> >  	struct i2c_client *i2c = to_i2c_client(dev);
> >  	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
> >  
> > -	if (adv7511->type == ADV7533)
> > +	if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> >  		reg -= ADV7533_REG_CEC_OFFSET;
> >  
> >  	switch (reg) {
> > @@ -994,7 +994,7 @@ static int adv7511_init_cec_regmap(struct
> > adv7511 *adv)
> >  		goto err;
> >  	}
> >  
> > -	if (adv->type == ADV7533) {
> > +	if (adv->type == ADV7533 || adv->type == ADV7535) {
> >  		ret = adv7533_patch_cec_registers(adv);
> >  		if (ret)
> >  			goto err;
> > @@ -1094,8 +1094,9 @@ static int adv7511_probe(struct i2c_client
> > *i2c, const struct i2c_device_id *id)
> >  	struct adv7511_link_config link_config;
> >  	struct adv7511 *adv7511;
> >  	struct device *dev = &i2c->dev;
> > +	struct regulator *reg_v1p2;
> >  	unsigned int val;
> > -	int ret;
> > +	int ret, reg_v1p2_uV;
> >  
> >  	if (!dev->of_node)
> >  		return -EINVAL;
> > @@ -1163,6 +1164,18 @@ static int adv7511_probe(struct i2c_client
> > *i2c, const struct i2c_device_id *id)
> >  	if (ret)
> >  		goto uninit_regulators;
> >  
> > +	if (adv7511->type == ADV7533) {
> > +		ret = match_string(adv7533_supply_names, adv7511-
> > >num_supplies,
> 
> Although they're equivalent, I would use
> ARRAY_SIZE(adv7533_supply_names) instead of adv7511->num_supplies to
> make the code easier to read (otherwise one has to check where
> num_supplies is set to validate this function call).
> 
Ack. Will modify it in V2
> > +									
> > "v1p2");
> 
> You should align "v1p2" left, with adv7533_supply_names.
> 
> I wonder if you couldn't simply hardcode the index, with a comment
> above
> the adv7533_supply_names array to mention that the order of the
> entries
> shall not be modified without updating the locations that hardcode
> indices.
Ok, my intention was to have robust code but as you said a comment
before the supply names array is enough.
> 
> > +		reg_v1p2 = adv7511->supplies[ret].consumer;
> > +		reg_v1p2_uV = regulator_get_voltage(reg_v1p2);
> > +
> > +		if (reg_v1p2_uV == 1200000) {
> > +			regmap_update_bits(adv7511->regmap,
> > +				ADV7511_REG_SUPPLY_SELECT, 0x80, 0x80);
> > +		}
> 
> Shouldn't you explicitly clear bit 7 when reg_v1p2_uV is not 1200000
> ?
> Or is there a guarantee it gets reset after a reboot ?
It is guaranteed that it starts cleared to be safe for the chip if the
voltage is 1.8V.
> 
> > +	}
> > +
> >  	adv7511_packet_disable(adv7511, 0xffff);
> >  
> >  	adv7511->i2c_edid = i2c_new_secondary_device(i2c, "edid",
> > @@ -1242,7 +1255,7 @@ static int adv7511_remove(struct i2c_client
> > *i2c)
> >  {
> >  	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
> >  
> > -	if (adv7511->type == ADV7533)
> > +	if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> >  		adv7533_detach_dsi(adv7511);
> >  	i2c_unregister_device(adv7511->i2c_cec);
> >  	if (adv7511->cec_clk)
> > @@ -1268,6 +1281,7 @@ static const struct i2c_device_id
> > adv7511_i2c_ids[] = {
> >  	{ "adv7513", ADV7511 },
> >  #ifdef CONFIG_DRM_I2C_ADV7533
> 
> As noted by Neil, I think this config option should be renamed
> (possibly
> to CONFIG_DRM_I2C_ADV753X) and its description updated.
Ack. Will rename to CONFIG_DRM_I2C_ADV753X and update decription.
> 
> >  	{ "adv7533", ADV7533 },
> > +	{ "adv7535", ADV7535 },
> >  #endif
> >  	{ }
> >  };
> > @@ -1279,6 +1293,7 @@ static const struct of_device_id
> > adv7511_of_ids[] = {
> >  	{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
> >  #ifdef CONFIG_DRM_I2C_ADV7533
> >  	{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
> > +	{ .compatible = "adi,adv7535", .data = (void *)ADV7535 },
> >  #endif
> >  	{ }
> >  };


More information about the dri-devel mailing list