[PATCH v3 05/12] drm/ttm: Expose ttm_tt_unpopulate for driver use

Andrey Grodzovsky Andrey.Grodzovsky at amd.com
Wed Dec 16 18:26:30 UTC 2020


On 12/16/20 12:12 PM, Daniel Vetter wrote:
> On Wed, Dec 16, 2020 at 5:18 PM Christian König
> <christian.koenig at amd.com> wrote:
>> Am 16.12.20 um 17:13 schrieb Andrey Grodzovsky:
>>> On 12/16/20 9:21 AM, Daniel Vetter wrote:
>>>> On Wed, Dec 16, 2020 at 9:04 AM Christian König
>>>> <ckoenig.leichtzumerken at gmail.com> wrote:
>>>>> Am 15.12.20 um 21:18 schrieb Andrey Grodzovsky:
>>>>>> [SNIP]
>>>>>>>> While we can't control user application accesses to the mapped
>>>>>>>> buffers explicitly and hence we use page fault rerouting
>>>>>>>> I am thinking that in this  case we may be able to sprinkle
>>>>>>>> drm_dev_enter/exit in any such sensitive place were we might
>>>>>>>> CPU access a DMA buffer from the kernel ?
>>>>>>> Yes, I fear we are going to need that.
>>>>>>>
>>>>>>>> Things like CPU page table updates, ring buffer accesses and FW
>>>>>>>> memcpy ? Is there other places ?
>>>>>>> Puh, good question. I have no idea.
>>>>>>>
>>>>>>>> Another point is that at this point the driver shouldn't access any
>>>>>>>> such buffers as we are at the process finishing the device.
>>>>>>>> AFAIK there is no page fault mechanism for kernel mappings so I
>>>>>>>> don't think there is anything else to do ?
>>>>>>> Well there is a page fault handler for kernel mappings, but that one
>>>>>>> just prints the stack trace into the system log and calls BUG(); :)
>>>>>>>
>>>>>>> Long story short we need to avoid any access to released pages after
>>>>>>> unplug. No matter if it's from the kernel or userspace.
>>>>>> I was just about to start guarding with drm_dev_enter/exit CPU
>>>>>> accesses from kernel to GTT ot VRAM buffers but then i looked more in
>>>>>> the code
>>>>>> and seems like ttm_tt_unpopulate just deletes DMA mappings (for the
>>>>>> sake of device to main memory access). Kernel page table is not
>>>>>> touched
>>>>>> until last bo refcount is dropped and the bo is released
>>>>>> (ttm_bo_release->destroy->amdgpu_bo_destroy->amdgpu_bo_kunmap). This
>>>>>> is both
>>>>>> for GTT BOs maped to kernel by kmap (or vmap) and for VRAM BOs mapped
>>>>>> by ioremap. So as i see it, nothing will bad will happen after we
>>>>>> unpopulate a BO while we still try to use a kernel mapping for it,
>>>>>> system memory pages backing GTT BOs are still mapped and not freed and
>>>>>> for
>>>>>> VRAM BOs same is for the IO physical ranges mapped into the kernel
>>>>>> page table since iounmap wasn't called yet.
>>>>> The problem is the system pages would be freed and if we kernel driver
>>>>> still happily write to them we are pretty much busted because we write
>>>>> to freed up memory.
>>>
>>> OK, i see i missed ttm_tt_unpopulate->..->ttm_pool_free which will
>>> release
>>> the GTT BO pages. But then isn't there a problem in ttm_bo_release since
>>> ttm_bo_cleanup_memtype_use which also leads to pages release comes
>>> before bo->destroy which unmaps the pages from kernel page table ? Won't
>>> we have end up writing to freed memory in this time interval ? Don't we
>>> need to postpone pages freeing to after kernel page table unmapping ?
>> BOs are only destroyed when there is a guarantee that nobody is
>> accessing them any more.
>>
>> The problem here is that the pages as well as the VRAM can be
>> immediately reused after the hotplug event.
>>
>>>
>>>> Similar for vram, if this is actual hotunplug and then replug, there's
>>>> going to be a different device behind the same mmio bar range most
>>>> likely (the higher bridges all this have the same windows assigned),
>>>
>>> No idea how this actually works but if we haven't called iounmap yet
>>> doesn't it mean that those physical ranges that are still mapped into
>>> page
>>> table should be reserved and cannot be reused for another
>>> device ? As a guess, maybe another subrange from the higher bridge's
>>> total
>>> range will be allocated.
>> Nope, the PCIe subsystem doesn't care about any ioremap still active for
>> a range when it is hotplugged.
>>
>>>> and that's bad news if we keep using it for current drivers. So we
>>>> really have to point all these cpu ptes to some other place.
>>>
>>> We can't just unmap it without syncing against any in kernel accesses
>>> to those buffers
>>> and since page faulting technique we use for user mapped buffers seems
>>> to not be possible
>>> for kernel mapped buffers I am not sure how to do it gracefully...
>> We could try to replace the kmap with a dummy page under the hood, but
>> that is extremely tricky.
>>
>> Especially since BOs which are just 1 page in size could point to the
>> linear mapping directly.
> I think it's just more work. Essentially
> - convert as much as possible of the kernel mappings to vmap_local,
> which Thomas Zimmermann is rolling out. That way a dma_resv_lock will
> serve as a barrier, and ofc any new vmap needs to fail or hand out a
> dummy mapping.

Read those patches. I am not sure how this helps with protecting
against accesses to released backing pages or IO physical ranges of BO
which is already mapped during the unplug event ?

Andrey


> - handle fbcon somehow. I think shutting it all down should work out.
> - worst case keep the system backing storage around for shared dma-buf
> until the other non-dynamic driver releases it. for vram we require
> dynamic importers (and maybe it wasn't such a bright idea to allow
> pinning of importer buffers, might need to revisit that).
>
> Cheers, Daniel
>
>> Christian.
>>
>>> Andrey
>>>
>>>
>>>> -Daniel
>>>>
>>>>> Christian.
>>>>>
>>>>>> I loaded the driver with vm_update_mode=3
>>>>>> meaning all VM updates done using CPU and hasn't seen any OOPs after
>>>>>> removing the device. I guess i can test it more by allocating GTT and
>>>>>> VRAM BOs
>>>>>> and trying to read/write to them after device is removed.
>>>>>>
>>>>>> Andrey
>>>>>>
>>>>>>
>>>>>>> Regards,
>>>>>>> Christian.
>>>>>>>
>>>>>>>> Andrey
>>>>>> _______________________________________________
>>>>>> amd-gfx mailing list
>>>>>> amd-gfx at lists.freedesktop.org
>>>>>> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=04%7C01%7CAndrey.Grodzovsky%40amd.com%7C37b4367cbdaa4133b01d08d8a1e5bf41%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637437355430007196%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=r0bIJS3HUDkFPqyFinAt4eahM%2BjF01DObZ5abgstzSU%3D&reserved=0
>>>>>>
>


More information about the dri-devel mailing list