[PATCH v8 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings
Vinay Simha B N
simhavcs at gmail.com
Wed Jul 29 12:31:21 UTC 2020
Hi All,
Please Review the patch
On Fri, Jul 10, 2020 at 7:11 PM Vinay Simha BN <simhavcs at gmail.com> wrote:
> - license modified to (GPL-2.0-only OR BSD-2-Clause)
> - single-link and dual-link lvds description and
> examples are added
> - proper indentation
> - VESA/JEIDA formats picked from panel-lvds dts
> - dsi data-lanes property removed, it will be picked
> from dsi0 ports
> - dual-link lvds port added and implemented
> - converted from .txt to .yaml
>
> Signed-off-by: Vinay Simha BN <simhavcs at gmail.com>
> Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
> Reviewed-by: Rob Herring <robh at kernel.org>
> ---
> v1:
> Initial version wast .txt file
>
> v2:
> From txt to yaml file format
>
> v3:
> * Andrzej Hajda review comments incorporated
> dual port lvds implemented
>
> * Laurent Pinchart review comments incorporated
> dsi lanes property removed and it is dynamically
> picked from the dsi ports
> VESA/JEIDA format picked from panel-lvds dts
>
> v4:
> * Sam Ravnborg review comments incorporated
> }' is indented properly in examples data-lanes
> description for single-link and dual-link lvds
>
> v5:
> * Sam Ravnborg review comments incorporated
> license modified to (GPL-2.0-only OR BSD-2-Clause)
> changelog added
>
> v6:
> * No changes, revision version mentioned to inline with
> driver file
>
> v7:
> * change log added
> Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
>
> v8:
> * Reviewed-by: Rob Herring <robh at kernel.org>
> * change log modified in reverse chronological order
> ---
> .../bindings/display/bridge/toshiba,tc358775.yaml | 215
> +++++++++++++++++++++
> 1 file changed, 215 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
>
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> new file mode 100644
> index 0000000..31f085d
> --- /dev/null
> +++
> b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> @@ -0,0 +1,215 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Toshiba TC358775 DSI to LVDS bridge bindings
> +
> +maintainers:
> + - Vinay Simha BN <simhavcs at gmail.com>
> +
> +description: |
> + This binding supports DSI to LVDS bridge TC358775
> +
> + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
> + Video frame size:
> + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display
> panel
> + limited by 135 MHz LVDS speed
> + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS
> display
> + panel, limited by 270 MHz LVDS speed.
> +
> +properties:
> + compatible:
> + const: toshiba,tc358775
> +
> + reg:
> + maxItems: 1
> + description: i2c address of the bridge, 0x0f
> +
> + vdd-supply:
> + maxItems: 1
> + description: 1.2V LVDS Power Supply
> +
> + vddio-supply:
> + maxItems: 1
> + description: 1.8V IO Power Supply
> +
> + stby-gpios:
> + maxItems: 1
> + description: Standby pin, Low active
> +
> + reset-gpios:
> + maxItems: 1
> + description: Hardware reset, Low active
> +
> + ports:
> + type: object
> + description:
> + A node containing input and output port nodes with endpoint
> definitions
> + as documented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
> + properties:
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + port at 0:
> + type: object
> + description: |
> + DSI Input. The remote endpoint phandle should be a
> + reference to a valid mipi_dsi_host device node.
> +
> + port at 1:
> + type: object
> + description: |
> + Video port for LVDS output (panel or connector).
> +
> + port at 2:
> + type: object
> + description: |
> + Video port for Dual link LVDS output (panel or connector).
> +
> + required:
> + - port at 0
> + - port at 1
> +
> +required:
> + - compatible
> + - reg
> + - vdd-supply
> + - vddio-supply
> + - stby-gpios
> + - reset-gpios
> + - ports
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + /* For single-link LVDS display panel */
> +
> + i2c at 78b8000 {
> + /* On High speed expansion */
> + label = "HS-I2C2";
> + reg = <0x078b8000 0x500>;
> + clock-frequency = <400000>; /* fastmode operation */
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tc_bridge: bridge at f {
> + compatible = "toshiba,tc358775";
> + reg = <0x0f>;
> +
> + vdd-supply = <&pm8916_l2>;
> + vddio-supply = <&pm8916_l6>;
> +
> + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + d2l_in_test: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + lvds_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> + };
> + };
> +
> + dsi at 1a98000 {
> + reg = <0x1a98000 0x25c>;
> + reg-names = "dsi_ctrl";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port at 1 {
> + reg = <1>;
> + dsi0_out: endpoint {
> + remote-endpoint = <&d2l_in_test>;
> + data-lanes = <0 1 2 3>;
> + };
> + };
> + };
> + };
> +
> + - |
> + /* For dual-link LVDS display panel */
> +
> + i2c at 78b8000 {
> + /* On High speed expansion */
> + label = "HS-I2C2";
> + reg = <0x078b8000 0x500>;
> + clock-frequency = <400000>; /* fastmode operation */
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tc_bridge_dual: bridge at f {
> + compatible = "toshiba,tc358775";
> + reg = <0x0f>;
> +
> + vdd-supply = <&pm8916_l2>;
> + vddio-supply = <&pm8916_l6>;
> +
> + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + d2l_in_dual: endpoint {
> + remote-endpoint = <&dsi0_out_dual>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + lvds0_out: endpoint {
> + remote-endpoint = <&panel_in0>;
> + };
> + };
> +
> + port at 2 {
> + reg = <2>;
> + lvds1_out: endpoint {
> + remote-endpoint = <&panel_in1>;
> + };
> + };
> + };
> + };
> + };
> +
> + dsi at 1a98000 {
> + reg = <0x1a98000 0x25c>;
> + reg-names = "dsi_ctrl";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port at 1 {
> + reg = <1>;
> + dsi0_out_dual: endpoint {
> + remote-endpoint = <&d2l_in_dual>;
> + data-lanes = <0 1 2 3>;
> + };
> + };
> + };
> + };
> +...
> --
> 2.1.2
>
>
--
regards,
vinaysimha
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20200729/37866d11/attachment.htm>
More information about the dri-devel
mailing list