[PATCH v5 1/2] dt-bindings: display: bridge: lvds-codec: Document pixel data sampling edge select

[Marek Vasut]

The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to
select input pixel data sampling edge. Add DT property "pclk-sample", not
the same as the one used by display timings but rather the same as used by
media, to define the pixel data sampling edge.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Sam Ravnborg <sam at ravnborg.org>
Cc: devicetree at vger.kernel.org
To: dri-devel at lists.freedesktop.org
---
V4: New patch split from combined V3
V5: Rebase on recent linux-next
---
 .../bindings/display/bridge/lvds-codec.yaml    | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 1faae3e323a4..708de84ac138 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -79,6 +79,14 @@ properties:
       - port at 0
       - port at 1
 
+  pclk-sample:
+    description:
+      Data sampling on rising or falling edge.
+    enum:
+      - 0  # Falling edge
+      - 1  # Rising edge
+    default: 0
+
   powerdown-gpios:
     description:
       The GPIO used to control the power down line of this device.
@@ -102,6 +110,16 @@ then:
               properties:
                 data-mapping: false
 
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: lvds-encoder
+then:
+  properties:
+    pclk-sample: false
+
 required:
   - compatible
   - ports
-- 
2.33.0