[RFC PATCH 1/4] drm/dp: Rename DPCD 248h according to DP 2.0 specs

Khaled Almahallawy khaled.almahallawy at intel.com
Thu Oct 21 05:07:10 UTC 2021


DPCD 248h name was changed from “PHY_TEST_PATTERN” in DP 1.4 to “LINK_QUAL_PATTERN_SELECT” in DP 2.0.

Also, DPCD 248h [6:0] is the same as DPCDs 10Bh/10Ch/10Dh/10Eh [6:0]. So removed the repeated definition of PHY patterns.

Reference: “DPCD 248h/10Bh/10Ch/10Dh/10Eh Name/Description Consistency”
https://groups.vesa.org/wg/AllMem/documentComment/2738

Signed-off-by: Khaled Almahallawy <khaled.almahallawy at intel.com>
---
 drivers/gpu/drm/drm_dp_helper.c |  6 +++---
 include/drm/drm_dp_helper.h     | 13 +++----------
 2 files changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index ada0a1ff262d..c9c928c08026 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -2489,19 +2489,19 @@ int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
 	if (lanes & DP_ENHANCED_FRAME_CAP)
 		data->enhanced_frame_cap = true;
 
-	err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern);
+	err = drm_dp_dpcd_readb(aux, DP_LINK_QUAL_PATTERN_SELECT, &data->phy_pattern);
 	if (err < 0)
 		return err;
 
 	switch (data->phy_pattern) {
-	case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
+	case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
 		err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0,
 				       &data->custom80, sizeof(data->custom80));
 		if (err < 0)
 			return err;
 
 		break;
-	case DP_PHY_TEST_PATTERN_CP2520:
+	case DP_LINK_QUAL_PATTERN_CP2520_PAT_1:
 		err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET,
 				       &data->hbr2_reset,
 				       sizeof(data->hbr2_reset));
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index afdf7f4183f9..ef915bb75bb4 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -862,16 +862,9 @@ struct drm_panel;
 # define DP_TEST_CRC_SUPPORTED		    (1 << 5)
 # define DP_TEST_COUNT_MASK		    0xf
 
-#define DP_PHY_TEST_PATTERN                 0x248
-# define DP_PHY_TEST_PATTERN_SEL_MASK       0x7
-# define DP_PHY_TEST_PATTERN_NONE           0x0
-# define DP_PHY_TEST_PATTERN_D10_2          0x1
-# define DP_PHY_TEST_PATTERN_ERROR_COUNT    0x2
-# define DP_PHY_TEST_PATTERN_PRBS7          0x3
-# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM   0x4
-# define DP_PHY_TEST_PATTERN_CP2520         0x5
-
-#define DP_PHY_SQUARE_PATTERN				0x249
+#define DP_LINK_QUAL_PATTERN_SELECT         0x248
+
+#define DP_PHY_SQUARE_PATTERN               0x249
 
 #define DP_TEST_HBR2_SCRAMBLER_RESET        0x24A
 #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0    0x250
-- 
2.25.1



More information about the dri-devel mailing list