[i-g-t 04/14] tests/kms_color: New subtests for Plane gamma
Modem, Bhanuprakash
bhanuprakash.modem at intel.com
Wed Jan 5 11:21:36 UTC 2022
> From: Harry Wentland <harry.wentland at amd.com>
> Sent: Wednesday, January 5, 2022 2:49 AM
> To: Modem, Bhanuprakash <bhanuprakash.modem at intel.com>; igt-
> dev at lists.freedesktop.org; dri-devel at lists.freedesktop.org
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>; Shankar, Uma
> <uma.shankar at intel.com>; ppaalanen at gmail.com
> Subject: Re: [i-g-t 04/14] tests/kms_color: New subtests for Plane gamma
>
> On 2022-01-02 23:05, Modem, Bhanuprakash wrote:
> >> From: Harry Wentland <harry.wentland at amd.com>
> >> Sent: Friday, November 26, 2021 10:25 PM
> >> To: Modem, Bhanuprakash <bhanuprakash.modem at intel.com>; igt-
> >> dev at lists.freedesktop.org; dri-devel at lists.freedesktop.org
> >> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>; Juha-Pekka Heikkila
> >> <juhapekka.heikkila at gmail.com>; Shankar, Uma <uma.shankar at intel.com>
> >> Subject: Re: [i-g-t 04/14] tests/kms_color: New subtests for Plane gamma
> >>
> >> On 2021-11-15 04:47, Bhanuprakash Modem wrote:
> >>> To verify Plane gamma, draw 3 gradient rectangles in red, green and blue,
> >>> with a maxed out gamma LUT and verify we have the same CRC as drawing
> solid
> >>> color rectangles.
> >>>
> >>> Cc: Harry Wentland <harry.wentland at amd.com>
> >>> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >>> Cc: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>
> >>> Cc: Uma Shankar <uma.shankar at intel.com>
> >>> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
> >>> ---
> >>> tests/kms_color.c | 179 +++++++++++++++++++++++++++++++++++++++++++++-
> >>> 1 file changed, 178 insertions(+), 1 deletion(-)
> >>>
> >>> diff --git a/tests/kms_color.c b/tests/kms_color.c
> >>> index 775f35964f..b45d66762f 100644
> >>> --- a/tests/kms_color.c
> >>> +++ b/tests/kms_color.c
> >>> @@ -24,7 +24,34 @@
> >>>
> >>> #include "kms_color_helper.h"
> >>>
> >>> -IGT_TEST_DESCRIPTION("Test Color Features at Pipe level");
> >>> +IGT_TEST_DESCRIPTION("Test Color Features at Pipe & Plane level");
> >>> +
> >>> +#define MAX_SUPPORTED_PLANES 7
> >>> +#define SDR_PLANE_BASE 3
> >>> +
> >>> +typedef bool (*test_t)(data_t*, igt_plane_t*);
> >>> +
> >>> +static bool is_hdr_plane(const igt_plane_t *plane)
> >>> +{
> >>> + return plane->index >= 0 && plane->index < SDR_PLANE_BASE;
> >>> +}
> >>> +
> >>> +static bool is_valid_plane(igt_plane_t *plane)
> >>> +{
> >>> + int index = plane->index;
> >>> +
> >>> + if (plane->type != DRM_PLANE_TYPE_PRIMARY)
> >>> + return false;
> >>> +
> >>> + /*
> >>> + * Test 1 HDR plane, 1 SDR plane.
> >>> + *
> >>> + * 0,1,2 HDR planes
> >>> + * 3,4,5,6 SDR planes
> >>> + *
> >>> + */
> >>
> >> This seems to be about Intel HW. AMD HW for example does
> >> not have HDR or SDR planes, only one generic plane.
> >>
> >>> + return index >= 0 && index < MAX_SUPPORTED_PLANES;
> >>> +}
> >>>
> >>> static void test_pipe_degamma(data_t *data,
> >>> igt_plane_t *primary)
> >>> @@ -638,6 +665,122 @@ static void test_pipe_limited_range_ctm(data_t
> *data,
> >>> }
> >>> #endif
> >>>
> >>> +static bool plane_gamma_test(data_t *data, igt_plane_t *plane)
> >>> +{
> >>> + igt_output_t *output;
> >>> + igt_display_t *display = &data->display;
> >>> + drmModeModeInfo *mode;
> >>> + struct igt_fb fb;
> >>> + drmModePropertyPtr gamma_mode = NULL;
> >>> + uint32_t i;
> >>> + bool ret = true;
> >>> + igt_pipe_crc_t *pipe_crc = NULL;
> >>> + color_t red_green_blue[] = {
> >>> + { 1.0, 0.0, 0.0 },
> >>> + { 0.0, 1.0, 0.0 },
> >>> + { 0.0, 0.0, 1.0 }
> >>> + };
> >>> +
> >>> + igt_info("Plane gamma test is running on pipe-%s plane-%s(%s)\n",
> >>> + kmstest_pipe_name(plane->pipe->pipe),
> >>> + kmstest_plane_type_name(plane->type),
> >>> + is_hdr_plane(plane) ? "hdr":"sdr");
> >>> +
> >>
> >> is_hdr_plane is Intel-specific.
> >>
> >>> + igt_require(igt_plane_has_prop(plane, IGT_PLANE_GAMMA_MODE));
> >>> + igt_require(igt_plane_has_prop(plane, IGT_PLANE_GAMMA_LUT));
> >>> +
> >>> + pipe_crc = igt_pipe_crc_new(data->drm_fd,
> >>> + plane->pipe->pipe,
> >>> + INTEL_PIPE_CRC_SOURCE_AUTO);
> >>> +
> >>> + output = igt_get_single_output_for_pipe(display, plane->pipe->pipe);
> >>> + igt_assert(output);
> >>> +
> >>> + igt_output_set_pipe(output, plane->pipe->pipe);
> >>> + mode = igt_output_get_mode(output);
> >>> +
> >>> + /* Create a framebuffer at the size of the output. */
> >>> + igt_assert(igt_create_fb(data->drm_fd,
> >>> + mode->hdisplay,
> >>> + mode->vdisplay,
> >>> + DRM_FORMAT_XRGB8888,
> >>> + DRM_FORMAT_MOD_LINEAR,
> >>> + &fb));
> >>> + igt_plane_set_fb(plane, &fb);
> >>> +
> >>> + /* Disable Pipe color props. */
> >>> + disable_ctm(plane->pipe);
> >>> + disable_degamma(plane->pipe);
> >>> + disable_gamma(plane->pipe);
> >>> +
> >>> + disable_plane_ctm(plane);
> >>> + disable_plane_degamma(plane);
> >>> + igt_display_commit2(display, display->is_atomic ?
> >>> + COMMIT_ATOMIC : COMMIT_LEGACY);
> >>> +
> >>> + gamma_mode = get_plane_gamma_degamma_mode(plane, IGT_PLANE_GAMMA_MODE);
> >>> +
> >>> + /* Iterate all supported gamma modes. */
> >>> + for (i = 0; i < gamma_mode->count_enums; i++) {
> >>> + igt_crc_t crc_gamma, crc_fullcolors;
> >>> + segment_data_t *segment_info = NULL;
> >>> + struct drm_color_lut_ext *lut = NULL;
> >>> + uint32_t lut_size = 0;
> >>> +
> >>> + /* Ignore 'no gamma' from enum list. */
> >>> + if (!strcmp(gamma_mode->enums[i].name, "no gamma"))
> >>> + continue;
> >>> +
> >>
> >> It might still make sense to test that this is doing bypass.
> >
> > As we know gamma_mode->enum[i].name represents the name of the
> > gamma mode and gamma_mode->enum[i].value would be the LUT blob
> > address of that particular gamma_mode.
> >
> > For "no gamma" case the blob address is NULL, so we can't commit
> > this mode. Hence skipping this mode.
> >
>
> I was thinking it'd be good to test the "no gamma" case as well
> here, i.e. the case were we set a NULL blob. I'm not sure what
> you mean when you say "we can't commit this mode."
Sorry for the confusion, "no gamma" is intentional to disable the gamma.
I think, we just need to check that we can able to flip with this mode.
So, we need to update disable_plane_gamma() to use this mode.
Or are you thinking any specific usecase for this?
- Bhanu
>
> Harry
>
> >>
> >>> + igt_info("Trying to use gamma mode: \'%s\'\n", gamma_mode-
> >>> enums[i].name);
> >>> +
> >>> + /* Draw solid colors with no gamma transformation. */
> >>> + disable_plane_gamma(plane);
> >>> + paint_rectangles(data, mode, red_green_blue, &fb);
> >>> + igt_plane_set_fb(plane, &fb);
> >>> + igt_display_commit2(display, display->is_atomic ?
> >>> + COMMIT_ATOMIC : COMMIT_LEGACY);
> >>> + igt_wait_for_vblank(data->drm_fd,
> >>> + display->pipes[plane->pipe->pipe].crtc_offset);
> >>> + igt_pipe_crc_collect_crc(pipe_crc, &crc_fullcolors);
> >>> +
> >>> + /* Draw gradient colors with gamma LUT to remap all
> >>> + * values to max red/green/blue.
> >>> + */
> >>> + segment_info = get_segment_data(data, gamma_mode->enums[i].value,
> >>> + gamma_mode->enums[i].name);
> >>> + lut_size = sizeof(struct drm_color_lut_ext) * segment_info-
> >>> entries_count;
> >>> + lut = create_max_lut(segment_info);
> >>> + set_plane_gamma(plane, gamma_mode->enums[i].name, lut, lut_size);
> >>> +
> >>> + paint_gradient_rectangles(data, mode, red_green_blue, &fb);
> >>> + igt_plane_set_fb(plane, &fb);
> >>> + igt_display_commit2(display, display->is_atomic ?
> >>> + COMMIT_ATOMIC : COMMIT_LEGACY);
> >>> + igt_wait_for_vblank(data->drm_fd,
> >>> + display->pipes[plane->pipe->pipe].crtc_offset);
> >>> + igt_pipe_crc_collect_crc(pipe_crc, &crc_gamma);
> >>> +
> >>> + /* Verify that the CRC of the software computed output is
> >>> + * equal to the CRC of the gamma LUT transformation output.
> >>> + */
> >>> + ret &= igt_check_crc_equal(&crc_gamma, &crc_fullcolors);
> >>> +
> >>> + free(lut);
> >>> + clear_segment_data(segment_info);
> >>> + }
> >>> +
> >>> + disable_plane_gamma(plane);
> >>> + igt_plane_set_fb(plane, NULL);
> >>> + igt_output_set_pipe(output, PIPE_NONE);
> >>> + igt_display_commit2(display, display->is_atomic ?
> >>> + COMMIT_ATOMIC : COMMIT_LEGACY);
> >>> +
> >>> + igt_pipe_crc_free(pipe_crc);
> >>> + drmModeFreeProperty(gamma_mode);
> >>> +
> >>> + return ret;
> >>> +}
> >>> +
> >>> static void
> >>> prep_pipe(data_t *data, enum pipe p)
> >>> {
> >>> @@ -890,6 +1033,37 @@ run_invalid_tests_for_pipe(data_t *data, enum pipe
> p)
> >>> invalid_ctm_matrix_sizes(data, p);
> >>> }
> >>>
> >>> +static void run_plane_color_test(data_t *data, enum pipe pipe, test_t
> test)
> >>> +{
> >>> + igt_plane_t *plane;
> >>> + int count = 0;
> >>> +
> >>> + for_each_plane_on_pipe(&data->display, pipe, plane) {
> >>> + if (!is_valid_plane(plane))
> >>> + continue;
> >>> +
> >>> + igt_assert(test(data, plane));
> >>> +
> >>> + count++;
> >>> + }
> >>> +
> >>> + igt_require_f(count, "No valid planes found.\n");
> >>> +}
> >>> +
> >>> +static void run_tests_for_plane(data_t *data, enum pipe pipe)
> >>> +{
> >>> + igt_fixture {
> >>> + igt_require_pipe(&data->display, pipe);
> >>> + igt_require_pipe_crc(data->drm_fd);
> >>> + igt_require(data->display.pipes[pipe].n_planes > 0);
> >>> + igt_display_require_output_on_pipe(&data->display, pipe);
> >>> + }
> >>> +
> >>> + igt_describe("Compare maxed out plane gamma LUT and solid color linear
> >> LUT");
> >>
> >> I can't seem to see the linear LUT test. This only seems to test
> >> the max LUT.
> >>
> >> Harry
> >>
> >>> + igt_subtest_f("pipe-%s-plane-gamma", kmstest_pipe_name(pipe))
> >>> + run_plane_color_test(data, pipe, plane_gamma_test);
> >>> +}
> >>> +
> >>> igt_main
> >>> {
> >>> data_t data = {};
> >>> @@ -910,6 +1084,9 @@ igt_main
> >>>
> >>> igt_subtest_group
> >>> run_invalid_tests_for_pipe(&data, pipe);
> >>> +
> >>> + igt_subtest_group
> >>> + run_tests_for_plane(&data, pipe);
> >>> }
> >>>
> >>> igt_fixture {
> >>>
> >
More information about the dri-devel
mailing list