[PATCH 5/8] drm/i915/dp: rewrite DP 2.0 128b/132b link training based on errata

Jani Nikula jani.nikula at intel.com
Tue Jan 25 17:03:43 UTC 2022


The DP 2.0 errata completely overhauls the 128b/132b link training, with
no provisions for backward compatibility with the original DP 2.0
specification.

The changes are too intrusive to consider reusing the same code for both
8b/10b and 128b/132b, mainly because the LTTPR channel equalisation is
done concurrently instead of serialized.

NOTES:

* It's a bit unclear when to wait for DP_INTERLANE_ALIGN_DONE and
  per-lane DP_LANE_SYMBOL_LOCKED. Figure xx4 in the SCR implies the
  LANEx_CHANNEL_EQ_DONE sequence may end with either 0x77,0x77,0x85 *or*
  0x33,0x33,0x84 (for four lane configuration in DPCD 0x202..0x204)
  i.e. without the above bits set. Text elsewhere seems contradictory or
  incomplete.

* We read entire link status (6 bytes) everywhere instead of individual
  DPCD addresses.

* There are some subtle ambiguities or contradictions in the order of
  some DPCD access and TPS signal enables/disables. It's also not clear
  whether these are significant.

Cc: Uma Shankar <uma.shankar at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 .../drm/i915/display/intel_dp_link_training.c | 252 +++++++++++++++++-
 1 file changed, 251 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
index 4e507aa75a03..8bb6a296f421 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
@@ -1102,6 +1102,250 @@ intel_dp_link_train_all_phys(struct intel_dp *intel_dp,
 	return ret;
 }
 
+
+/*
+ * 128b/132b DP LANEx_EQ_DONE Sequence (DP 2.0 E11 3.5.2.16.1)
+ */
+static bool
+intel_dp_128b132b_lane_eq(struct intel_dp *intel_dp,
+			  const struct intel_crtc_state *crtc_state)
+{
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+	u8 link_status[DP_LINK_STATUS_SIZE];
+	int delay_us;
+	int try, max_tries = 20;
+	unsigned long deadline;
+
+	/*
+	 * Reset signal levels. Start transmitting 128b/132b TPS1.
+	 *
+	 * Put DPRX and LTTPRs (if any) into intra-hop AUX mode by writing TPS1
+	 * in DP_TRAINING_PATTERN_SET.
+	 */
+	if (!intel_dp_reset_link_train(intel_dp, crtc_state, DP_PHY_DPRX,
+				       DP_TRAINING_PATTERN_1)) {
+		drm_err(&i915->drm,
+			"[ENCODER:%d:%s] Failed to start 128b/132b TPS1\n",
+			encoder->base.base.id, encoder->base.name);
+		return false;
+	}
+
+	delay_us = drm_dp_128b132b_read_aux_rd_interval(&intel_dp->aux);
+
+	/* Read the initial TX FFE settings. */
+	if (drm_dp_dpcd_read_link_status(&intel_dp->aux, link_status) < 0) {
+		drm_err(&i915->drm,
+			"[ENCODER:%d:%s] Failed to read TX FFE presets\n",
+			encoder->base.base.id, encoder->base.name);
+		return false;
+	}
+
+	/* Update signal levels and training set as requested. */
+	intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX, link_status);
+	if (!intel_dp_update_link_train(intel_dp, crtc_state, DP_PHY_DPRX)) {
+		drm_err(&i915->drm,
+			"[ENCODER:%d:%s] Failed to set initial TX FFE settings\n",
+			encoder->base.base.id, encoder->base.name);
+		return false;
+	}
+
+	/* Start transmitting 128b/132b TPS2. */
+	if (!intel_dp_set_link_train(intel_dp, crtc_state, DP_PHY_DPRX,
+				     DP_TRAINING_PATTERN_2)) {
+		drm_err(&i915->drm,
+			"[ENCODER:%d:%s] Failed to start 128b/132b TPS2\n",
+			encoder->base.base.id, encoder->base.name);
+		return false;
+	}
+
+	for (try = 0; try < max_tries; try++) {
+		usleep_range(delay_us, 2 * delay_us);
+
+		/*
+		 * The delay may get updated. The transmitter shall read the
+		 * delay before link status during link training.
+		 */
+		delay_us = drm_dp_128b132b_read_aux_rd_interval(&intel_dp->aux);
+
+		if (drm_dp_dpcd_read_link_status(&intel_dp->aux, link_status) < 0) {
+			drm_err(&i915->drm,
+				"[ENCODER:%d:%s] Failed to read link status\n",
+				encoder->base.base.id, encoder->base.name);
+			return false;
+		}
+
+		if (drm_dp_128b132b_link_training_failed(link_status)) {
+			intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status);
+			drm_err(&i915->drm,
+				"[ENCODER:%d:%s] Downstream link training failure\n",
+				encoder->base.base.id, encoder->base.name);
+			return false;
+		}
+
+		if (drm_dp_128b132b_lane_channel_eq_done(link_status, crtc_state->lane_count)) {
+			drm_dbg_kms(&i915->drm,
+				    "[ENCODER:%d:%s] Lane channel eq done\n",
+				    encoder->base.base.id, encoder->base.name);
+			break;
+		}
+
+		/* Update signal levels and training set as requested. */
+		intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX, link_status);
+		if (!intel_dp_update_link_train(intel_dp, crtc_state, DP_PHY_DPRX)) {
+			drm_err(&i915->drm,
+				"[ENCODER:%d:%s] Failed to update TX FFE settings\n",
+				encoder->base.base.id, encoder->base.name);
+			return false;
+		}
+	}
+
+	if (try == max_tries) {
+		intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status);
+		drm_err(&i915->drm,
+			"[ENCODER:%d:%s] Max loop count reached\n",
+			encoder->base.base.id, encoder->base.name);
+		return false;
+	}
+
+	/*
+	 * FIXME: This should probably be the total time budget for the complete
+	 * LANEx_EQ_DONE Sequence, including the loop above and the aux rd
+	 * intervals.
+	 */
+	deadline = jiffies + msecs_to_jiffies(400);
+	for (;;) {
+		if (drm_dp_128b132b_eq_interlane_align_done(link_status)) {
+			drm_dbg_kms(&i915->drm,
+				    "[ENCODER:%d:%s] Interlane align done\n",
+				    encoder->base.base.id, encoder->base.name);
+			break;
+		}
+
+		if (time_after(jiffies, deadline)) {
+			intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status);
+			drm_err(&i915->drm,
+				"[ENCODER:%d:%s] Interlane align timeout\n",
+				encoder->base.base.id, encoder->base.name);
+			return false;
+		}
+
+		usleep_range(2000, 3000);
+
+		if (drm_dp_dpcd_read_link_status(&intel_dp->aux, link_status) < 0) {
+			drm_err(&i915->drm,
+				"[ENCODER:%d:%s] Failed to read link status\n",
+				encoder->base.base.id, encoder->base.name);
+			return false;
+		}
+
+		if (drm_dp_128b132b_link_training_failed(link_status)) {
+			intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status);
+			drm_err(&i915->drm,
+				"[ENCODER:%d:%s] Downstream link training failure\n",
+				encoder->base.base.id, encoder->base.name);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+/*
+ * 128b/132b DP LANEx_CDS_DONE Sequence (DP 2.0 E11 3.5.2.16.2)
+ */
+static bool
+intel_dp_128b132b_lane_cds(struct intel_dp *intel_dp,
+			   const struct intel_crtc_state *crtc_state,
+			   int lttpr_count)
+{
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+	u8 link_status[DP_LINK_STATUS_SIZE];
+	unsigned long deadline;
+
+	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TRAINING_PATTERN_SET,
+			       DP_TRAINING_PATTERN_2_CDS) != 1) {
+		drm_err(&i915->drm,
+			"[ENCODER:%d:%s] Failed to start 128b/132b TPS2 CDS\n",
+			encoder->base.base.id, encoder->base.name);
+		return false;
+	}
+
+	deadline = jiffies + msecs_to_jiffies((lttpr_count + 1) * 20);
+	for (;;) {
+		usleep_range(2000, 3000);
+
+		if (drm_dp_dpcd_read_link_status(&intel_dp->aux, link_status) < 0) {
+			drm_err(&i915->drm,
+				"[ENCODER:%d:%s] Failed to read link status\n",
+				encoder->base.base.id, encoder->base.name);
+			return false;
+		}
+
+		if (drm_dp_128b132b_cds_interlane_align_done(link_status) &&
+		    drm_dp_128b132b_lane_symbol_locked(link_status, crtc_state->lane_count)) {
+			drm_dbg_kms(&i915->drm,
+				    "[ENCODER:%d:%s] CDS interlane align done\n",
+				    encoder->base.base.id, encoder->base.name);
+			break;
+		}
+
+		if (drm_dp_128b132b_link_training_failed(link_status)) {
+			intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status);
+			drm_err(&i915->drm,
+				"[ENCODER:%d:%s] Downstream link training failure\n",
+				encoder->base.base.id, encoder->base.name);
+			return false;
+		}
+
+		if (time_after(jiffies, deadline)) {
+			intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status);
+			drm_err(&i915->drm,
+				"[ENCODER:%d:%s] CDS timeout\n",
+				encoder->base.base.id, encoder->base.name);
+			return false;
+		}
+	}
+
+	/* FIXME: Should DP_TRAINING_PATTERN_DISABLE be written first? */
+	if (intel_dp->set_idle_link_train)
+		intel_dp->set_idle_link_train(intel_dp, crtc_state);
+
+	return true;
+}
+
+/*
+ * 128b/132b link training sequence. (DP 2.0 E11 SCR on link training.)
+ */
+static bool
+intel_dp_128b132b_link_train(struct intel_dp *intel_dp,
+			     const struct intel_crtc_state *crtc_state,
+			     int lttpr_count)
+{
+	struct intel_connector *connector = intel_dp->attached_connector;
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	bool passed = false;
+
+	/*
+	 * FIXME: Validate previous LT termination by reading Intra-Hop AUX
+	 * Reply Indication by reading bit 3 of SINK_STATUS at 00205h
+	 */
+
+	if (intel_dp_128b132b_lane_eq(intel_dp, crtc_state) &&
+	    intel_dp_128b132b_lane_cds(intel_dp, crtc_state, lttpr_count))
+		passed = true;
+
+	drm_dbg_kms(&dp_to_i915(intel_dp)->drm,
+		    "[CONNECTOR:%d:%s][ENCODER:%d:%s] 128b/132b Link Training %s at link rate = %d, lane count = %d\n",
+		    connector->base.base.id, connector->base.name,
+		    encoder->base.base.id, encoder->base.name,
+		    passed ? "passed" : "failed",
+		    crtc_state->port_clock, crtc_state->lane_count);
+
+	return passed;
+}
+
 /**
  * intel_dp_start_link_train - start link training
  * @intel_dp: DP struct
@@ -1115,6 +1359,7 @@ intel_dp_link_train_all_phys(struct intel_dp *intel_dp,
 void intel_dp_start_link_train(struct intel_dp *intel_dp,
 			       const struct intel_crtc_state *crtc_state)
 {
+	static bool passed;
 	/*
 	 * TODO: Reiniting LTTPRs here won't be needed once proper connector
 	 * HW state readout is added.
@@ -1127,6 +1372,11 @@ void intel_dp_start_link_train(struct intel_dp *intel_dp,
 
 	intel_dp_prepare_link_train(intel_dp, crtc_state);
 
-	if (!intel_dp_link_train_all_phys(intel_dp, crtc_state, lttpr_count))
+	if (intel_dp_is_uhbr(crtc_state))
+		passed = intel_dp_128b132b_link_train(intel_dp, crtc_state, lttpr_count);
+	else
+		passed = intel_dp_link_train_all_phys(intel_dp, crtc_state, lttpr_count);
+
+	if (!passed)
 		intel_dp_schedule_fallback_link_training(intel_dp, crtc_state);
 }
-- 
2.30.2



More information about the dri-devel mailing list