[PATCH 06/16] drm/msm/dpu: add dpu_hw_cdm abstraction for CDM block
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Dec 1 21:10:47 UTC 2023
On Fri, 1 Dec 2023 at 20:19, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>
>
>
> On 11/30/2023 11:05 PM, Dmitry Baryshkov wrote:
> > On Fri, 1 Dec 2023 at 01:36, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
> >>
> >>
> >>
> >> On 8/30/2023 5:00 PM, Dmitry Baryshkov wrote:
> >>> On Thu, 31 Aug 2023 at 01:50, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
> >>>>
> >>>> CDM block comes with its own set of registers and operations
> >>>> which can be done. In-line with other hardware sub-blocks, this
> >>>> change adds the dpu_hw_cdm abstraction for the CDM block.
> >>>>
> >>>> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> >>>> ---
> >>>> drivers/gpu/drm/msm/Makefile | 1 +
> >>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c | 272 ++++++++++++++++++++
> >>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h | 135 ++++++++++
> >>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 1 +
> >>>> 4 files changed, 409 insertions(+)
> >>>> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c
> >>>> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h
> >>>>
> >>>> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> >>>> index 8d02d8c33069..2010cb1ca995 100644
> >>>> --- a/drivers/gpu/drm/msm/Makefile
> >>>> +++ b/drivers/gpu/drm/msm/Makefile
> >>>> @@ -63,6 +63,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
> >>>> disp/dpu1/dpu_encoder_phys_wb.o \
> >>>> disp/dpu1/dpu_formats.o \
> >>>> disp/dpu1/dpu_hw_catalog.o \
> >>>> + disp/dpu1/dpu_hw_cdm.o \
> >>>> disp/dpu1/dpu_hw_ctl.o \
> >>>> disp/dpu1/dpu_hw_dsc.o \
> >>>> disp/dpu1/dpu_hw_dsc_1_2.o \
> >>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c
> >>>> new file mode 100644
> >>>> index 000000000000..a2f7ee8f54e4
> >>>> --- /dev/null
> >>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c
> >>>> @@ -0,0 +1,272 @@
> >>>> +// SPDX-License-Identifier: GPL-2.0-only
> >>>> +/*
> >>>> + * Copyright (c) 2023, The Linux Foundation. All rights reserved.
> >>>> + */
> >>>> +
> >>>> +#include <drm/drm_managed.h>
> >>>> +
> >>>> +#include "dpu_hw_mdss.h"
> >>>> +#include "dpu_hw_util.h"
> >>>> +#include "dpu_hw_catalog.h"
> >>>> +#include "dpu_hw_cdm.h"
> >>>> +#include "dpu_kms.h"
> >>>> +
> >>>> +#define CDM_CSC_10_OPMODE 0x000
> >>>> +#define CDM_CSC_10_BASE 0x004
> >>>> +
> >>>> +#define CDM_CDWN2_OP_MODE 0x100
> >>>> +#define CDM_CDWN2_CLAMP_OUT 0x104
> >>>> +#define CDM_CDWN2_PARAMS_3D_0 0x108
> >>>> +#define CDM_CDWN2_PARAMS_3D_1 0x10C
> >>>> +#define CDM_CDWN2_COEFF_COSITE_H_0 0x110
> >>>> +#define CDM_CDWN2_COEFF_COSITE_H_1 0x114
> >>>> +#define CDM_CDWN2_COEFF_COSITE_H_2 0x118
> >>>> +#define CDM_CDWN2_COEFF_OFFSITE_H_0 0x11C
> >>>> +#define CDM_CDWN2_COEFF_OFFSITE_H_1 0x120
> >>>> +#define CDM_CDWN2_COEFF_OFFSITE_H_2 0x124
> >>>> +#define CDM_CDWN2_COEFF_COSITE_V 0x128
> >>>> +#define CDM_CDWN2_COEFF_OFFSITE_V 0x12C
> >>>> +#define CDM_CDWN2_OUT_SIZE 0x130
> >>>> +
> >>>> +#define CDM_HDMI_PACK_OP_MODE 0x200
> >>>> +#define CDM_CSC_10_MATRIX_COEFF_0 0x004
> >>>> +
> >>>> +#define CDM_MUX 0x224
> >>>> +
> >>>> +/**
> >>>> + * Horizontal coefficients for cosite chroma downscale
> >>>> + * s13 representation of coefficients
> >>>> + */
> >>>> +static u32 cosite_h_coeff[] = {0x00000016, 0x000001cc, 0x0100009e};
> >>>> +
> >>>> +/**
> >>>> + * Horizontal coefficients for offsite chroma downscale
> >>>> + */
> >>>> +static u32 offsite_h_coeff[] = {0x000b0005, 0x01db01eb, 0x00e40046};
> >>>> +
> >>>> +/**
> >>>> + * Vertical coefficients for cosite chroma downscale
> >>>> + */
> >>>> +static u32 cosite_v_coeff[] = {0x00080004};
> >>>> +/**
> >>>> + * Vertical coefficients for offsite chroma downscale
> >>>> + */
> >>>> +static u32 offsite_v_coeff[] = {0x00060002};
> >>>> +
> >>>> +static int dpu_hw_cdm_setup_csc_10bit(struct dpu_hw_cdm *ctx, struct dpu_csc_cfg *data)
> >>>> +{
> >>>> + dpu_hw_csc_setup(&ctx->hw, CDM_CSC_10_MATRIX_COEFF_0, data, true);
> >>>
> >>> Where was this defined?
> >>>
> >>
> >> Its in this file itself
> >>
> >> +#define CDM_CSC_10_MATRIX_COEFF_0 0x004
> >>
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> +static int dpu_hw_cdm_setup_cdwn(struct dpu_hw_cdm *ctx, struct dpu_hw_cdm_cfg *cfg)
> >>>> +{
> >>>> + struct dpu_hw_blk_reg_map *c = &ctx->hw;
> >>>> + u32 opmode = 0;
> >>>> + u32 out_size = 0;
> >>>> +
> >>>> + if (cfg->output_bit_depth == CDM_CDWN_OUTPUT_10BIT)
> >>>> + opmode &= ~BIT(7);
> >>>> + else
> >>>> + opmode |= BIT(7);
> >>>> +
> >>>> + /* ENABLE DWNS_H bit */
> >>>> + opmode |= BIT(1);
> >>>> +
> >>>> + switch (cfg->h_cdwn_type) {
> >>>> + case CDM_CDWN_DISABLE:
> >>>> + /* CLEAR METHOD_H field */
> >>>> + opmode &= ~(0x18);
> >>>> + /* CLEAR DWNS_H bit */
> >>>> + opmode &= ~BIT(1);
> >>>> + break;
> >>>> + case CDM_CDWN_PIXEL_DROP:
> >>>> + /* Clear METHOD_H field (pixel drop is 0) */
> >>>> + opmode &= ~(0x18);
> >>>> + break;
> >>>> + case CDM_CDWN_AVG:
> >>>> + /* Clear METHOD_H field (Average is 0x1) */
> >>>> + opmode &= ~(0x18);
> >>>> + opmode |= (0x1 << 0x3);
> >>>> + break;
> >>>> + case CDM_CDWN_COSITE:
> >>>> + /* Clear METHOD_H field (Average is 0x2) */
> >>>> + opmode &= ~(0x18);
> >>>> + opmode |= (0x2 << 0x3);
> >>>> + /* Co-site horizontal coefficients */
> >>>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_COSITE_H_0,
> >>>> + cosite_h_coeff[0]);
> >>>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_COSITE_H_1,
> >>>> + cosite_h_coeff[1]);
> >>>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_COSITE_H_2,
> >>>> + cosite_h_coeff[2]);
> >>>> + break;
> >>>> + case CDM_CDWN_OFFSITE:
> >>>> + /* Clear METHOD_H field (Average is 0x3) */
> >>>> + opmode &= ~(0x18);
> >>>> + opmode |= (0x3 << 0x3);
> >>>> +
> >>>> + /* Off-site horizontal coefficients */
> >>>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_OFFSITE_H_0,
> >>>> + offsite_h_coeff[0]);
> >>>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_OFFSITE_H_1,
> >>>> + offsite_h_coeff[1]);
> >>>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_OFFSITE_H_2,
> >>>> + offsite_h_coeff[2]);
> >>>> + break;
> >>>> + default:
> >>>> + pr_err("%s invalid horz down sampling type\n", __func__);
> >>>> + return -EINVAL;
> >>>> + }
> >>>> +
> >>>> + /* ENABLE DWNS_V bit */
> >>>> + opmode |= BIT(2);
> >>>> +
> >>>> + switch (cfg->v_cdwn_type) {
> >>>> + case CDM_CDWN_DISABLE:
> >>>> + /* CLEAR METHOD_V field */
> >>>> + opmode &= ~(0x60);
> >>>
> >>> #define, GENMASK
> >>>
> >>>> + /* CLEAR DWNS_V bit */
> >>>> + opmode &= ~BIT(2);
> >>>> + break;
> >>>> + case CDM_CDWN_PIXEL_DROP:
> >>>> + /* Clear METHOD_V field (pixel drop is 0) */
> >>>> + opmode &= ~(0x60);
> >>>> + break;
> >>>> + case CDM_CDWN_AVG:
> >>>> + /* Clear METHOD_V field (Average is 0x1) */
> >>>> + opmode &= ~(0x60);
> >>>> + opmode |= (0x1 << 0x5);
> >>>
> >>> #define
> >>>
> >>>> + break;
> >>>> + case CDM_CDWN_COSITE:
> >>>> + /* Clear METHOD_V field (Average is 0x2) */
> >>>> + opmode &= ~(0x60);
> >>>> + opmode |= (0x2 << 0x5);
> >>>> + /* Co-site vertical coefficients */
> >>>> + DPU_REG_WRITE(c,
> >>>> + CDM_CDWN2_COEFF_COSITE_V,
> >>>> + cosite_v_coeff[0]);
> >>>
> >>> align to opening bracket
> >>>
> >>>> + break;
> >>>> + case CDM_CDWN_OFFSITE:
> >>>> + /* Clear METHOD_V field (Average is 0x3) */
> >>>> + opmode &= ~(0x60);
> >>>> + opmode |= (0x3 << 0x5);
> >>>> +
> >>>> + /* Off-site vertical coefficients */
> >>>> + DPU_REG_WRITE(c,
> >>>> + CDM_CDWN2_COEFF_OFFSITE_V,
> >>>> + offsite_v_coeff[0]);
> >>>
> >>> align to opening bracket
> >>>
> >>>> + break;
> >>>> + default:
> >>>> + return -EINVAL;
> >>>> + }
> >>>> +
> >>>> + if (cfg->v_cdwn_type || cfg->h_cdwn_type)
> >>>> + opmode |= BIT(0); /* EN CDWN module */
> >>>
> >>> #define
> >>>
> >>
> >> Ack to all comments about GENMASK and #define
> >>
> >>>> + else
> >>>> + opmode &= ~BIT(0);
> >>>> +
> >>>> + out_size = (cfg->output_width & 0xFFFF) |
> >>>> + ((cfg->output_height & 0xFFFF) << 16);
> >>>> + DPU_REG_WRITE(c, CDM_CDWN2_OUT_SIZE, out_size);
> >>>> + DPU_REG_WRITE(c, CDM_CDWN2_OP_MODE, opmode);
> >>>> + DPU_REG_WRITE(c, CDM_CDWN2_CLAMP_OUT,
> >>>> + ((0x3FF << 16) | 0x0));
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> +int dpu_hw_cdm_enable(struct dpu_hw_cdm *ctx, struct dpu_hw_cdm_cfg *cdm)
> >>>> +{
> >>>> + struct dpu_hw_blk_reg_map *c = &ctx->hw;
> >>>> + const struct dpu_format *fmt;
> >>>> + u32 opmode = 0;
> >>>> + u32 csc = 0;
> >>>> +
> >>>> + if (!ctx || !cdm)
> >>>> + return -EINVAL;
> >>>> +
> >>>> + fmt = cdm->output_fmt;
> >>>> +
> >>>> + if (!DPU_FORMAT_IS_YUV(fmt))
> >>>> + return -EINVAL;
> >>>> +
> >>>> + if (cdm->output_type == CDM_CDWN_OUTPUT_HDMI) {
> >>>> + if (fmt->chroma_sample != DPU_CHROMA_H1V2)
> >>>> + return -EINVAL; /*unsupported format */
> >>>> + opmode = BIT(0);
> >>>> + opmode |= (fmt->chroma_sample << 1);
> >>>> + }
> >>>> +
> >>>> + csc |= BIT(2);
> >>>> + csc &= ~BIT(1);
> >>>> + csc |= BIT(0);
> >>>
> >>> Can we get some sensible #defines for all this magic, please?
> >>>
> >>
> >> Ack, will do.
> >>
> >>>> +
> >>>> + if (ctx && ctx->ops.bind_pingpong_blk)
> >>>> + ctx->ops.bind_pingpong_blk(ctx, true,
> >>>> + cdm->pp_id);
> >>>> +
> >>>> + DPU_REG_WRITE(c, CDM_CSC_10_OPMODE, csc);
> >>>> + DPU_REG_WRITE(c, CDM_HDMI_PACK_OP_MODE, opmode);
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> +void dpu_hw_cdm_disable(struct dpu_hw_cdm *ctx)
> >>>> +{
> >>>> + if (!ctx)
> >>>> + return;
> >>>> +
> >>>> + if (ctx && ctx->ops.bind_pingpong_blk)
> >>>> + ctx->ops.bind_pingpong_blk(ctx, false, 0);
> >>>
> >>> PINGPONG_NONE.
> >>>
> >>>> +}
> >>>> +
> >>>> +static void dpu_hw_cdm_bind_pingpong_blk(struct dpu_hw_cdm *ctx, bool enable,
> >>>> + const enum dpu_pingpong pp)
> >>>> +{
> >>>> + struct dpu_hw_blk_reg_map *c;
> >>>> + int mux_cfg = 0xF;
> >>>> +
> >>>> + if (!ctx || (enable && (pp < PINGPONG_0 || pp >= PINGPONG_MAX)))
> >>>> + return;
> >>>
> >>> I'd say, this is useless. We don't have such checks in other
> >>> bind_pingpong_blk() callbacks.
> >>>
> >>> Also there should be a guarding check for DPU >= 5.0 either here or at
> >>> the ops init.
> >>>
> >>
> >> Will add it at ops init
> >>
> >>>> +
> >>>> + c = &ctx->hw;
> >>>> +
> >>>> + if (enable)
> >>>> + mux_cfg = (pp - PINGPONG_0) & 0x7;
> >>>> +
> >>>> + DPU_REG_WRITE(c, CDM_MUX, mux_cfg);
> >>>> +}
> >>>> +
> >>>> +static void _setup_cdm_ops(struct dpu_hw_cdm_ops *ops, unsigned long features)
> >>>
> >>> Please inline
> >>>
> >>
> >> OK
> >>
> >>>> +{
> >>>> + ops->setup_csc_data = dpu_hw_cdm_setup_csc_10bit;
> >>>> + ops->setup_cdwn = dpu_hw_cdm_setup_cdwn;
> >>>> + ops->enable = dpu_hw_cdm_enable;
> >>>> + ops->disable = dpu_hw_cdm_disable;
> >>>> + ops->bind_pingpong_blk = dpu_hw_cdm_bind_pingpong_blk;
> >>>
> >>> As you seem to call this function directly, we might as well drop the
> >>> callback from the ops.
> >>>
> >>
> >> There are two paths for the bind_pingpong_blk(). One is absorbed within
> >> cdm_enable and cdm_disable calls to bind and unbind the pingpong resp.
> >> And yes, for that we dont need a separate ops as its within the same file.
> >>
> >> This will handle cases where we transition from YUV to non-YUV cases and
> >> vice-versa without an encoder disable in between which I believe happens
> >> in the IGT cases.
> >>
> >> But the dpu_encoder_helper_phys_cleanup() path is only in the encoder
> >> disable() path without a non-YUV frame in the middle so lets say we were
> >> in YUV mode but then just disabled the encoder we do need the cleanup
> >> there and since thats outside of the dpu_hw_cdm, we do need this op.
> >>
> >> I agree we need to protect this with the DPU revision check.
> >>
> >>>> +}
> >>>> +
> >>>> +struct dpu_hw_cdm *dpu_hw_cdm_init(const struct dpu_cdm_cfg *cfg, void __iomem *addr)
> >>>> +{
> >>>> + struct dpu_hw_cdm *c;
> >>>> +
> >>>> + c = kzalloc(sizeof(*c), GFP_KERNEL);
> >>>> + if (!c)
> >>>> + return ERR_PTR(-ENOMEM);
> >>>> +
> >>>> + c->hw.blk_addr = addr + cfg->base;
> >>>> + c->hw.log_mask = DPU_DBG_MASK_CDM;
> >>>> +
> >>>> + /* Assign ops */
> >>>> + c->idx = cfg->id;
> >>>> + c->caps = cfg;
> >>>> + _setup_cdm_ops(&c->ops, c->caps->features);
> >>>> +
> >>>> + return c;
> >>>> +}
> >>>> +
> >>>> +void dpu_hw_cdm_destroy(struct dpu_hw_cdm *cdm)
> >>>> +{
> >>>> + kfree(cdm);
> >>>
> >>> I'd prefer not to introduce another manual kzalloc/kfree pair, see
> >>> https://patchwork.freedesktop.org/series/120366/
> >>>
> >>
> >> I recall I did not want to have a manual kzalloc/kfree pair. But the
> >> issue was I think this series was not merged that time (and is isnt
> >> merged now either)
> >
> > No response, no reviews since 15th August. Today is the 1st of December.
> >
> > I'm close to deciding that unreviewed series have no issues and start
> > showing them to -next after a grace period of 1 month.
> >
> >> and this is the one which passes drm_dev to
> >> dpu_rm_init. I thought maybe it was easier for you to absorb this change
> >> into that series instead of me pulling that whole series to make this
> >> one compile as we will not be adding new HW blocks after this for the
> >> next 2 cycles. It will only be using existing ones.
> >>
> >> If its too much trouble for you, I will rebase on top of that series but
> >> I am pretty sure you will have to rebase and post that again anyway on
> >> top of the current msm-next.
> >>
> >> I am also going to do the same thing now with this series.
> >>
>
> There were 4 patches in that series which didnt get a R-b. Perhaps
> jessica can finish the reviews which she started on that one.
>
> Leaving her a note on IRC would not have hurt like its a common practice
> sometimes with other reviewers.
>
> Now, do you want to rebase this on msm-next and re-send so that I can
> rebase on top of yours?
Sure, I'll do it now.
>
> >> So we can just decide that in whose rebase we will handle it.
> >>
> >>>> +}
> >>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h
> >>>> new file mode 100644
> >>>> index 000000000000..da60893a5c02
> >>>> --- /dev/null
> >>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h
> >>>> @@ -0,0 +1,135 @@
> >>>> +/* SPDX-License-Identifier: GPL-2.0-only */
> >>>> +/*
> >>>> + * Copyright (c) 2023, The Linux Foundation. All rights reserved.
> >>>> + */
> >>>> +
> >>>> +#ifndef _DPU_HW_CDM_H
> >>>> +#define _DPU_HW_CDM_H
> >>>> +
> >>>> +#include "dpu_hw_mdss.h"
> >>>> +#include "dpu_hw_top.h"
> >>>> +
> >>>> +struct dpu_hw_cdm;
> >>>> +
> >>>> +struct dpu_hw_cdm_cfg {
> >>>> + u32 output_width;
> >>>> + u32 output_height;
> >>>> + u32 output_bit_depth;
> >>>> + u32 h_cdwn_type;
> >>>> + u32 v_cdwn_type;
> >>>> + const struct dpu_format *output_fmt;
> >>>> + u32 output_type;
> >>>> + int pp_id;
> >>>> +};
> >>>> +
> >>>> +enum dpu_hw_cdwn_type {
> >>>> + CDM_CDWN_DISABLE,
> >>>> + CDM_CDWN_PIXEL_DROP,
> >>>> + CDM_CDWN_AVG,
> >>>> + CDM_CDWN_COSITE,
> >>>> + CDM_CDWN_OFFSITE,
> >>>> +};
> >>>> +
> >>>> +enum dpu_hw_cdwn_output_type {
> >>>> + CDM_CDWN_OUTPUT_HDMI,
> >>>> + CDM_CDWN_OUTPUT_WB,
> >>>> +};
> >>>> +
> >>>> +enum dpu_hw_cdwn_output_bit_depth {
> >>>> + CDM_CDWN_OUTPUT_8BIT,
> >>>> + CDM_CDWN_OUTPUT_10BIT,
> >>>> +};
> >>>> +
> >>>> +/**
> >>>> + * struct dpu_hw_cdm_ops : Interface to the chroma down Hw driver functions
> >>>> + * Assumption is these functions will be called after
> >>>> + * clocks are enabled
> >>>> + * @setup_csc: Programs the csc matrix
> >>>> + * @setup_cdwn: Sets up the chroma down sub module
> >>>> + * @enable: Enables the output to interface and programs the
> >>>> + * output packer
> >>>> + * @disable: Puts the cdm in bypass mode
> >>>> + * @bind_pingpong_blk: enable/disable the connection with pingpong which
> >>>> + * will feed pixels to this cdm
> >>>> + */
> >>>> +struct dpu_hw_cdm_ops {
> >>>> + /**
> >>>> + * Programs the CSC matrix for conversion from RGB space to YUV space,
> >>>> + * it is optional to call this function as this matrix is automatically
> >>>> + * set during initialization, user should call this if it wants
> >>>> + * to program a different matrix than default matrix.
> >>>> + * @cdm: Pointer to the chroma down context structure
> >>>> + * @data Pointer to CSC configuration data
> >>>> + * return: 0 if success; error code otherwise
> >>>> + */
> >>>> + int (*setup_csc_data)(struct dpu_hw_cdm *cdm, struct dpu_csc_cfg *data);
> >>>> +
> >>>> + /**
> >>>> + * Programs the Chroma downsample part.
> >>>> + * @cdm Pointer to chroma down context
> >>>> + * @cfg Pointer to the cdm configuration data
> >>>> + */
> >>>> + int (*setup_cdwn)(struct dpu_hw_cdm *cdm, struct dpu_hw_cdm_cfg *cfg);
> >>>> +
> >>>> + /**
> >>>> + * Enable the CDM module
> >>>> + * @cdm Pointer to chroma down context
> >>>> + */
> >>>> + int (*enable)(struct dpu_hw_cdm *cdm, struct dpu_hw_cdm_cfg *cfg);
> >>>> +
> >>>> + /**
> >>>> + * Disable the CDM module
> >>>> + * @cdm Pointer to chroma down context
> >>>> + */
> >>>> + void (*disable)(struct dpu_hw_cdm *cdm);
> >>>> +
> >>>> + /**
> >>>> + * Enable/disable the connection with pingpong
> >>>> + * @cdm Pointer to chroma down context
> >>>> + * @enable Enable/disable control
> >>>> + * @pp pingpong block id.
> >>>> + */
> >>>> + void (*bind_pingpong_blk)(struct dpu_hw_cdm *cdm, bool enable,
> >>>> + const enum dpu_pingpong pp);
> >>>> +};
> >>>> +
> >>>> +/**
> >>>> + * struct dpu_hw_cdm - cdm description
> >>>> + * @base: Hardware block base structure
> >>>> + * @hw: Block hardware details
> >>>> + * @idx: CDM index
> >>>> + * @caps: Pointer to cdm_cfg
> >>>> + * @ops: handle to operations possible for this CDM
> >>>> + */
> >>>> +struct dpu_hw_cdm {
> >>>> + struct dpu_hw_blk base;
> >>>> + struct dpu_hw_blk_reg_map hw;
> >>>> +
> >>>> + /* chroma down */
> >>>> + const struct dpu_cdm_cfg *caps;
> >>>> + enum dpu_cdm idx;
> >>>> +
> >>>> + /* ops */
> >>>> + struct dpu_hw_cdm_ops ops;
> >>>> +};
> >>>> +
> >>>> +/**
> >>>> + * dpu_hw_cdm_init - initializes the cdm hw driver object.
> >>>> + * should be called once before accessing every cdm.
> >>>> + * @cdm: CDM catalog entry for which driver object is required
> >>>> + * @addr : mapped register io address of MDSS
> >>>> + */
> >>>> +struct dpu_hw_cdm *dpu_hw_cdm_init(const struct dpu_cdm_cfg *cdm, void __iomem *addr);
> >>>> +
> >>>> +/**
> >>>> + * dpu_hw_cdm_destroy - destroys cdm driver context
> >>>> + * @cdm: Pointer to cdm driver context returned by dpu_hw_cdm_init
> >>>> + */
> >>>> +void dpu_hw_cdm_destroy(struct dpu_hw_cdm *cdm);
> >>>> +
> >>>> +static inline struct dpu_hw_cdm *to_dpu_hw_cdm(struct dpu_hw_blk *hw)
> >>>> +{
> >>>> + return container_of(hw, struct dpu_hw_cdm, base);
> >>>> +}
> >>>> +
> >>>> +#endif /*_DPU_HW_CDM_H */
> >>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> >>>> index 4d6dba18caf0..34f943102499 100644
> >>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> >>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> >>>> @@ -463,6 +463,7 @@ struct dpu_mdss_color {
> >>>> #define DPU_DBG_MASK_ROT (1 << 9)
> >>>> #define DPU_DBG_MASK_DSPP (1 << 10)
> >>>> #define DPU_DBG_MASK_DSC (1 << 11)
> >>>> +#define DPU_DBG_MASK_CDM (1 << 12)
> >>>>
> >>>> /**
> >>>> * struct dpu_hw_tear_check - Struct contains parameters to configure
> >>>> --
> >>>> 2.40.1
> >>>>
> >>>
> >>>
> >>> --
> >>> With best wishes
> >>> Dmitry
> >
> >
> >
--
With best wishes
Dmitry
More information about the dri-devel
mailing list