[PATCH v2 1/1] drm/msm/adreno: Add support for SM7150 SoC machine

[Konrad Dybcio]

On 12/7/23 20:46, Akhil P Oommen wrote:
> On Thu, Nov 23, 2023 at 12:03:56AM +0300, Danila Tikhonov wrote:
>>
>> sc7180/sm7125 (atoll) expects speedbins from atoll.dtsi:
>> And has a parameter: /delete-property/ qcom,gpu-speed-bin;
>> 107 for 504Mhz max freq, pwrlevel 4
>> 130 for 610Mhz max freq, pwrlevel 3
>> 159 for 750Mhz max freq, pwrlevel 5
>> 169 for 800Mhz max freq, pwrlevel 2
>> 174 for 825Mhz max freq, pwrlevel 1 (Downstream says 172, but thats probably
>> typo)
> A bit confused. where do you see 172 in downstream code? It is 174 in the downstream
> code when I checked.
>> For rest of the speed bins, speed-bin value is calulated as
>> FMAX/4.8MHz + 2 round up to zero decimal places.
>>
>> sm7150 (sdmmagpie) expects speedbins from sdmmagpie-gpu.dtsi:
>> 128 for 610Mhz max freq, pwrlevel 3
>> 146 for 700Mhz max freq, pwrlevel 2
>> 167 for 800Mhz max freq, pwrlevel 4
>> 172 for 504Mhz max freq, pwrlevel 1
>> For rest of the speed bins, speed-bin value is calulated as
>> FMAX/4.8 MHz round up to zero decimal places.
>>
>> Creating a new entry does not make much sense.
>> I can suggest expanding the standard entry:
>>
>> .speedbins = ADRENO_SPEEDBINS(
>>      { 0, 0 },
>>      /* sc7180/sm7125 */
>>      { 107, 3 },
>>      { 130, 4 },
>>      { 159, 5 },
>>      { 168, 1 }, has already
>>      { 174, 2 }, has already
>>      /* sm7150 */
>>      { 128, 1 },
>>      { 146, 2 },
>>      { 167, 3 },
>>      { 172, 4 }, ),
>>
> 
> A difference I see between atoll and sdmmagpie is that the former
> doesn't support 180Mhz. If you want to do the same, then you need to use
> a new bit in the supported-hw bitfield instead of reusing an existing one.
> Generally it is better to stick to exactly what downstream does.
OK I take my doubts back, let's go with adding a new one.

Konrad