[PATCH 2/5] clk: sunxi-ng: a64: Add constraints on PLL-MIPI's n/m ratio and parent rate

[Jernej Škrabec]

Dne ponedeljek, 18. december 2023 ob 14:35:20 CET je Frank Oltmanns napisal(a):
> The Allwinner A64 manual lists the following constraints for the
> PLL-MIPI clock:
>  - M/N >= 3

Same as in previous patch, should be "<=".

Best regards,
Jernej

>  - (PLL_VIDEO0)/M >= 24MHz
> 
> Use these constraints.
> 
> Signed-off-by: Frank Oltmanns <frank at oltmanns.dev>
> ---
>  drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> index 8951ffc14ff5..c034ac027d1c 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> @@ -176,6 +176,8 @@ static struct ccu_nkm pll_mipi_clk = {
>  	.n		= _SUNXI_CCU_MULT(8, 4),
>  	.k		= _SUNXI_CCU_MULT_MIN(4, 2, 2),
>  	.m		= _SUNXI_CCU_DIV(0, 4),
> +	.max_mn_ratio	= 3,
> +	.parent_wo_nk	= 24000000,
>  	.common		= {
>  		.reg		= 0x040,
>  		.hw.init	= CLK_HW_INIT("pll-mipi", "pll-video0",
> 
>