[PATCH 5/6] arm64: dts: rockchip: Fix some dtb-check warnings

Heiko Stübner heiko at sntech.de
Sat Dec 23 11:43:56 UTC 2023


Am Freitag, 22. Dezember 2023, 12:05:45 CET schrieb Manuel Traut:
> devicetree checks show some warnings:
> 
> video-codec at fdea0400: 'interrupt-names' is a required property
> from schema $id: http://devicetree.org/schemas/media/rockchip-vpu.yaml#
> 
> hdmi at fe0a0000: Unevaluated properties are not allowed ('power-domains' were unexpected)
> from schema $id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml#
> 
> i2s at fe420000: reset-names:0: 'm' is not one of ['tx-m', 'rx-m']
> from schema $id: http://devicetree.org/schemas/sound/rockchip,i2s-tdm.yaml#
> 
> phy at fe870000: 'power-domains' is a required property
> from schema $id: http://devicetree.org/schemas/phy/rockchip-inno-csi-dphy.yaml#
> 
> Fix them by
>   - setting a interrupt-name for the video-codec
>   - remove the unevaluated power-domain property from hdmi
>   - set reset-names according to the spec for i2s
>   - add a power-domain property for the CSI phy
> 
> Signed-off-by: Manuel Traut <manut at mecka.net>
> ---
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index c19c0f1b3778..651156759582 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -597,6 +597,7 @@ vpu: video-codec at fdea0400 {
>  		compatible = "rockchip,rk3568-vpu";
>  		reg = <0x0 0xfdea0000 0x0 0x800>;
>  		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "vdpu";
>  		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
>  		clock-names = "aclk", "hclk";
>  		iommus = <&vdpu_mmu>;
> @@ -819,7 +820,6 @@ hdmi: hdmi at fe0a0000 {
>  		clock-names = "iahb", "isfr", "cec", "ref";
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> -		power-domains = <&power RK3568_PD_VO>;

are you really sure that the hdmi controller is _not_ part of
the VO powerdomain? I.e. Depending on that knowledge it could
also simply be necessary to add the property to the binding.


Heiko




More information about the dri-devel mailing list