[Intel-gfx] [PATCH 2/9] drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload()

Ville Syrjälä ville.syrjala at linux.intel.com
Thu Jan 26 18:33:42 UTC 2023


On Thu, Jan 26, 2023 at 07:37:04PM +0200, Ville Syrjälä wrote:
> On Wed, Jan 25, 2023 at 01:48:45PM +0200, Imre Deak wrote:
> > Atm, drm_dp_remove_payload() uses the same payload state to both get the
> > vc_start_slot required for the payload removal DPCD message and to
> > deduct time_slots from vc_start_slot of all payloads after the one being
> > removed.
> > 
> > The above isn't always correct, as vc_start_slot must be the up-to-date
> > version contained in the new payload state,
> 
> Why is that? In fact couldn't we just clear both start_slot and
> pbn to 0 here?

OK, so it has to be the "current" start slot. Which in this case
means new_payload since that's what's housed in the new topolpogy state
which is the one getting mutated when streams are being removed/added.

Confusing, but seems correct
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

> 
> > but time_slots must be the
> > one used when the payload was previously added, contained in the old
> > payload state. The new payload's time_slots can change vs. the old one
> > if the current atomic commit changes the corresponding mode.
> > 
> > This patch let's drivers pass the old and new payload states to
> > drm_dp_remove_payload(), but keeps these the same for now in all drivers
> > not to change the behavior. A follow-up i915 patch will pass in that
> > driver the correct old and new states to the function.
> > 
> > Cc: Lyude Paul <lyude at redhat.com>
> > Cc: Ben Skeggs <bskeggs at redhat.com>
> > Cc: Karol Herbst <kherbst at redhat.com>
> > Cc: Harry Wentland <harry.wentland at amd.com>
> > Cc: Alex Deucher <alexander.deucher at amd.com>
> > Cc: Wayne Lin <Wayne.Lin at amd.com>
> > Cc: stable at vger.kernel.org # 6.1
> > Cc: dri-devel at lists.freedesktop.org
> > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > ---
> >  .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c |  2 +-
> >  drivers/gpu/drm/display/drm_dp_mst_topology.c | 22 ++++++++++---------
> >  drivers/gpu/drm/i915/display/intel_dp_mst.c   |  4 +++-
> >  drivers/gpu/drm/nouveau/dispnv50/disp.c       |  2 +-
> >  include/drm/display/drm_dp_mst_helper.h       |  3 ++-
> >  5 files changed, 19 insertions(+), 14 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> > index 6994c9a1ed858..fed4ce6821161 100644
> > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> > @@ -179,7 +179,7 @@ bool dm_helpers_dp_mst_write_payload_allocation_table(
> >  	if (enable)
> >  		drm_dp_add_payload_part1(mst_mgr, mst_state, payload);
> >  	else
> > -		drm_dp_remove_payload(mst_mgr, mst_state, payload);
> > +		drm_dp_remove_payload(mst_mgr, mst_state, payload, payload);
> >  
> >  	/* mst_mgr->->payloads are VC payload notify MST branch using DPCD or
> >  	 * AUX message. The sequence is slot 1-63 allocated sequence for each
> > diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c
> > index 5861b0a6247bc..ebf6e31e156e0 100644
> > --- a/drivers/gpu/drm/display/drm_dp_mst_topology.c
> > +++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c
> > @@ -3342,7 +3342,8 @@ EXPORT_SYMBOL(drm_dp_add_payload_part1);
> >   * drm_dp_remove_payload() - Remove an MST payload
> >   * @mgr: Manager to use.
> >   * @mst_state: The MST atomic state
> > - * @payload: The payload to write
> > + * @old_payload: The payload with its old state
> > + * @new_payload: The payload to write
> >   *
> >   * Removes a payload from an MST topology if it was successfully assigned a start slot. Also updates
> >   * the starting time slots of all other payloads which would have been shifted towards the start of
> > @@ -3350,33 +3351,34 @@ EXPORT_SYMBOL(drm_dp_add_payload_part1);
> >   */
> >  void drm_dp_remove_payload(struct drm_dp_mst_topology_mgr *mgr,
> >  			   struct drm_dp_mst_topology_state *mst_state,
> > -			   struct drm_dp_mst_atomic_payload *payload)
> > +			   const struct drm_dp_mst_atomic_payload *old_payload,
> > +			   struct drm_dp_mst_atomic_payload *new_payload)
> >  {
> >  	struct drm_dp_mst_atomic_payload *pos;
> >  	bool send_remove = false;
> >  
> >  	/* We failed to make the payload, so nothing to do */
> > -	if (payload->vc_start_slot == -1)
> > +	if (new_payload->vc_start_slot == -1)
> >  		return;
> 
> So I take it the only reason we even have that is the copy being done in
> drm_dp_mst_atomic_wait_for_dependencies()? I don't really understand
> why any of that is being done tbh. If the new payload hasn't been
> allocated yet then why can't its vc_start_slots just stay at -1
> until that time?
> 
> This whole thing feels a bit weird since the payload table really isn't
> your normal atomic state that is computed ahead of time. Instead it just
> gets built up on as we go during the actual commit. So not really sure
> why we're even tracking it in atomic state...
> 
> >  
> >  	mutex_lock(&mgr->lock);
> > -	send_remove = drm_dp_mst_port_downstream_of_branch(payload->port, mgr->mst_primary);
> > +	send_remove = drm_dp_mst_port_downstream_of_branch(new_payload->port, mgr->mst_primary);
> >  	mutex_unlock(&mgr->lock);
> >  
> >  	if (send_remove)
> > -		drm_dp_destroy_payload_step1(mgr, mst_state, payload);
> > +		drm_dp_destroy_payload_step1(mgr, mst_state, new_payload);
> >  	else
> >  		drm_dbg_kms(mgr->dev, "Payload for VCPI %d not in topology, not sending remove\n",
> > -			    payload->vcpi);
> > +			    new_payload->vcpi);
> >  
> >  	list_for_each_entry(pos, &mst_state->payloads, next) {
> > -		if (pos != payload && pos->vc_start_slot > payload->vc_start_slot)
> > -			pos->vc_start_slot -= payload->time_slots;
> > +		if (pos != new_payload && pos->vc_start_slot > new_payload->vc_start_slot)
> > +			pos->vc_start_slot -= old_payload->time_slots;
> >  	}
> > -	payload->vc_start_slot = -1;
> > +	new_payload->vc_start_slot = -1;
> >  
> >  	mgr->payload_count--;
> > -	mgr->next_start_slot -= payload->time_slots;
> > +	mgr->next_start_slot -= old_payload->time_slots;
> >  }
> >  EXPORT_SYMBOL(drm_dp_remove_payload);
> >  
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > index ba29c294b7c1b..5f7bcb5c14847 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > @@ -526,6 +526,8 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
> >  		to_intel_connector(old_conn_state->connector);
> >  	struct drm_dp_mst_topology_state *mst_state =
> >  		drm_atomic_get_mst_topology_state(&state->base, &intel_dp->mst_mgr);
> > +	struct drm_dp_mst_atomic_payload *payload =
> > +		drm_atomic_get_mst_payload_state(mst_state, connector->port);
> >  	struct drm_i915_private *i915 = to_i915(connector->base.dev);
> >  
> >  	drm_dbg_kms(&i915->drm, "active links %d\n",
> > @@ -534,7 +536,7 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
> >  	intel_hdcp_disable(intel_mst->connector);
> >  
> >  	drm_dp_remove_payload(&intel_dp->mst_mgr, mst_state,
> > -			      drm_atomic_get_mst_payload_state(mst_state, connector->port));
> > +			      payload, payload);
> >  
> >  	intel_audio_codec_disable(encoder, old_crtc_state, old_conn_state);
> >  }
> > diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c
> > index edcb2529b4025..ed9d374147b8d 100644
> > --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
> > +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
> > @@ -885,7 +885,7 @@ nv50_msto_prepare(struct drm_atomic_state *state,
> >  
> >  	// TODO: Figure out if we want to do a better job of handling VCPI allocation failures here?
> >  	if (msto->disabled) {
> > -		drm_dp_remove_payload(mgr, mst_state, payload);
> > +		drm_dp_remove_payload(mgr, mst_state, payload, payload);
> >  
> >  		nvif_outp_dp_mst_vcpi(&mstm->outp->outp, msto->head->base.index, 0, 0, 0, 0);
> >  	} else {
> > diff --git a/include/drm/display/drm_dp_mst_helper.h b/include/drm/display/drm_dp_mst_helper.h
> > index 41fd8352ab656..f5eb9aa152b14 100644
> > --- a/include/drm/display/drm_dp_mst_helper.h
> > +++ b/include/drm/display/drm_dp_mst_helper.h
> > @@ -841,7 +841,8 @@ int drm_dp_add_payload_part2(struct drm_dp_mst_topology_mgr *mgr,
> >  			     struct drm_dp_mst_atomic_payload *payload);
> >  void drm_dp_remove_payload(struct drm_dp_mst_topology_mgr *mgr,
> >  			   struct drm_dp_mst_topology_state *mst_state,
> > -			   struct drm_dp_mst_atomic_payload *payload);
> > +			   const struct drm_dp_mst_atomic_payload *old_payload,
> > +			   struct drm_dp_mst_atomic_payload *new_payload);
> >  
> >  int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr);
> >  
> > -- 
> > 2.37.1
> 
> -- 
> Ville Syrjälä
> Intel

-- 
Ville Syrjälä
Intel


More information about the dri-devel mailing list