[PATCH v6 5/9] drm/meson: gate px_clk when setting rate

Neil Armstrong neil.armstrong at linaro.org
Mon Jul 3 07:24:23 UTC 2023


On 30/06/2023 20:10, George Stark wrote:
> Hello Neil
> 
> On 6/30/23 19:29, Neil Armstrong wrote:
>> Disable the px_clk when setting the rate to recover a fully
>> configured and correctly reset VCLK clock tree after the rate
>> is set.
>>
>> Fixes: 77d9e1e6b846 ("drm/meson: add support for MIPI-DSI transceiver")
>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>> ---
>>   drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
>> index 57447abf1a29..dc63d2d813a9 100644
>> --- a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
>> +++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
>> @@ -94,6 +94,7 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
>>           return ret;
>>       }
>> +    clk_disable_unprepare(mipi_dsi->px_clk);
>>       ret = clk_set_rate(mipi_dsi->px_clk, mipi_dsi->mode->clock * 1000);
>>       if (ret) {
>> @@ -102,6 +103,12 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
>>           return ret;
>>       }
>> +    clk_prepare_enable(mipi_dsi->px_clk);
> probably should be:
> ret = clk_prepare_enable(mipi_dsi->px_clk);

Indeed, thx for noticing :-)

>> +    if (ret) {
>> +        dev_err(mipi_dsi->dev, "Failed to enable DSI Pixel clock (ret %d)\n", ret);
>> +        return ret;
>> +    }
>> +
>>       switch (mipi_dsi->dsi_device->format) {
>>       case MIPI_DSI_FMT_RGB888:
>>           dpi_data_format = DPI_COLOR_24BIT;
>>



More information about the dri-devel mailing list