[PATCH v3 2/6] dt-bindings: display/msm: Add reg bus and rotator interconnects

[Neil Armstrong]

Hi,

On 28/09/2023 13:35, Dmitry Baryshkov wrote:
> From: Konrad Dybcio <konrad.dybcio at linaro.org>
> 
> Apart from the already handled data bus (MAS_MDP_Pn<->DDR), there are
> other connection paths:
> - a path that connects rotator block to the DDR.
> - a path that needs to be handled to ensure MDSS register access
>    functions properly, namely the "reg bus", a.k.a the CPU-MDSS CFG
>    interconnect.
> 
> Describe these paths bindings to allow using them in device trees and in
> the driver
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>   Documentation/devicetree/bindings/display/msm/mdss-common.yaml | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
> index f69196e4cc76..6b4ce08a60dc 100644
> --- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
> @@ -66,12 +66,14 @@ properties:
>       items:
>         - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
>         - description: Interconnect path from mdp1 port to the data bus
> +      - description: Interconnect path from CPU to the reg bus
>   
>     interconnect-names:
>       minItems: 1
>       items:
>         - const: mdp0-mem
>         - const: mdp1-mem
> +      - const: cpu-cfg
>   
>     resets:
>       items:

This is not enough, on sm8450 this still appears with patch applied:
arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: display-subsystem at ae00000: interconnects: [[182, 14, 0, 30, 3, 0], [182, 14, 0, 30, 3, 0], [53, 2, 3, 183, 14, 3]] is too long
         from schema $id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#
arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: display-subsystem at ae00000: interconnect-names: ['mdp0-mem', 'mdp1-mem', 'cpu-cfg'] is too long
         from schema $id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#

This is also needed:
==========><================================
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
index 001b26e65301..e94e8630cc85 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -30,10 +30,10 @@ properties:
      maxItems: 1

    interconnects:
-    maxItems: 2
+    maxItems: 3

    interconnect-names:
-    maxItems: 2
+    maxItems: 3

  patternProperties:
    "^display-controller@[0-9a-f]+$":
==============================================

Thanks,
Neil