[PATCH 09/10] drm/ast: Detect ast device type and config mode without ast device
Thomas Zimmermann
tzimmermann at suse.de
Mon Nov 13 08:50:31 UTC 2023
Return the ast chip and config in the detection function's parameters
instead of storing them directly in the ast device instance.
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
---
drivers/gpu/drm/ast/ast_main.c | 104 ++++++++++++++++++---------------
1 file changed, 57 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
index f100df8d74f71..331a9a861153b 100644
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -76,25 +76,27 @@ static void ast_open_key(void __iomem *ioregs)
__ast_write8_i(ioregs, AST_IO_VGACRI, 0x80, AST_IO_VGACR80_PASSWORD);
}
-static int ast_device_config_init(struct ast_device *ast)
+static int ast_detect_chip(struct pci_dev *pdev,
+ void __iomem *regs, void __iomem *ioregs,
+ enum ast_chip *chip_out,
+ enum ast_config_mode *config_mode_out)
{
- struct drm_device *dev = &ast->base;
- struct pci_dev *pdev = to_pci_dev(dev->dev);
- struct device_node *np = dev->dev->of_node;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ enum ast_config_mode config_mode = ast_use_defaults;
uint32_t scu_rev = 0xffffffff;
+ enum ast_chip chip;
u32 data;
- u8 jregd0, jregd1;
+ u8 vgacrd0, vgacrd1;
/*
* Find configuration mode and read SCU revision
*/
- ast->config_mode = ast_use_defaults;
-
/* Check if we have device-tree properties */
if (np && !of_property_read_u32(np, "aspeed,scu-revision-id", &data)) {
/* We do, disable P2A access */
- ast->config_mode = ast_use_dt;
+ config_mode = ast_use_dt;
scu_rev = data;
} else if (pdev->device == PCI_CHIP_AST2000) { // Not all families have a P2A bridge
/*
@@ -102,9 +104,9 @@ static int ast_device_config_init(struct ast_device *ast)
* is disabled. We force using P2A if VGA only mode bit
* is set D[7]
*/
- jregd0 = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd0, 0xff);
- jregd1 = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, 0xff);
- if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) {
+ vgacrd0 = __ast_read8_i(ioregs, AST_IO_VGACRI, 0xd0);
+ vgacrd1 = __ast_read8_i(ioregs, AST_IO_VGACRI, 0xd1);
+ if (!(vgacrd0 & 0x80) || !(vgacrd1 & 0x10)) {
/*
* We have a P2A bridge and it is enabled.
@@ -112,32 +114,32 @@ static int ast_device_config_init(struct ast_device *ast)
/* Patch AST2500/AST2510 */
if ((pdev->revision & 0xf0) == 0x40) {
- if (!(jregd0 & AST_VRAM_INIT_STATUS_MASK))
- ast_patch_ahb_2500(ast->regs);
+ if (!(vgacrd0 & AST_VRAM_INIT_STATUS_MASK))
+ ast_patch_ahb_2500(regs);
}
/* Double check that it's actually working */
- data = ast_read32(ast, 0xf004);
+ data = __ast_read32(regs, 0xf004);
if ((data != 0xffffffff) && (data != 0x00)) {
- ast->config_mode = ast_use_p2a;
+ config_mode = ast_use_p2a;
/* Read SCU7c (silicon revision register) */
- ast_write32(ast, 0xf004, 0x1e6e0000);
- ast_write32(ast, 0xf000, 0x1);
- scu_rev = ast_read32(ast, 0x1207c);
+ __ast_write32(regs, 0xf004, 0x1e6e0000);
+ __ast_write32(regs, 0xf000, 0x1);
+ scu_rev = __ast_read32(regs, 0x1207c);
}
}
}
- switch (ast->config_mode) {
+ switch (config_mode) {
case ast_use_defaults:
- drm_info(dev, "Using default configuration\n");
+ dev_info(dev, "Using default configuration\n");
break;
case ast_use_dt:
- drm_info(dev, "Using device-tree for configuration\n");
+ dev_info(dev, "Using device-tree for configuration\n");
break;
case ast_use_p2a:
- drm_info(dev, "Using P2A bridge for configuration\n");
+ dev_info(dev, "Using P2A bridge for configuration\n");
break;
}
@@ -146,63 +148,66 @@ static int ast_device_config_init(struct ast_device *ast)
*/
if (pdev->revision >= 0x50) {
- ast->chip = AST2600;
- drm_info(dev, "AST 2600 detected\n");
+ chip = AST2600;
+ dev_info(dev, "AST 2600 detected\n");
} else if (pdev->revision >= 0x40) {
switch (scu_rev & 0x300) {
case 0x0100:
- ast->chip = AST2510;
- drm_info(dev, "AST 2510 detected\n");
+ chip = AST2510;
+ dev_info(dev, "AST 2510 detected\n");
break;
default:
- ast->chip = AST2500;
- drm_info(dev, "AST 2500 detected\n");
+ chip = AST2500;
+ dev_info(dev, "AST 2500 detected\n");
}
} else if (pdev->revision >= 0x30) {
switch (scu_rev & 0x300) {
case 0x0100:
- ast->chip = AST1400;
- drm_info(dev, "AST 1400 detected\n");
+ chip = AST1400;
+ dev_info(dev, "AST 1400 detected\n");
break;
default:
- ast->chip = AST2400;
- drm_info(dev, "AST 2400 detected\n");
+ chip = AST2400;
+ dev_info(dev, "AST 2400 detected\n");
}
} else if (pdev->revision >= 0x20) {
switch (scu_rev & 0x300) {
case 0x0000:
- ast->chip = AST1300;
- drm_info(dev, "AST 1300 detected\n");
+ chip = AST1300;
+ dev_info(dev, "AST 1300 detected\n");
break;
default:
- ast->chip = AST2300;
- drm_info(dev, "AST 2300 detected\n");
+ chip = AST2300;
+ dev_info(dev, "AST 2300 detected\n");
break;
}
} else if (pdev->revision >= 0x10) {
switch (scu_rev & 0x0300) {
case 0x0200:
- ast->chip = AST1100;
- drm_info(dev, "AST 1100 detected\n");
+ chip = AST1100;
+ dev_info(dev, "AST 1100 detected\n");
break;
case 0x0100:
- ast->chip = AST2200;
- drm_info(dev, "AST 2200 detected\n");
+ chip = AST2200;
+ dev_info(dev, "AST 2200 detected\n");
break;
case 0x0000:
- ast->chip = AST2150;
- drm_info(dev, "AST 2150 detected\n");
+ chip = AST2150;
+ dev_info(dev, "AST 2150 detected\n");
break;
default:
- ast->chip = AST2100;
- drm_info(dev, "AST 2100 detected\n");
+ chip = AST2100;
+ dev_info(dev, "AST 2100 detected\n");
break;
}
} else {
- ast->chip = AST2000;
- drm_info(dev, "AST 2000 detected\n");
+ chip = AST2000;
+ dev_info(dev, "AST 2000 detected\n");
}
+ *chip_out = chip;
+ *config_mode_out = config_mode;
+
return 0;
}
@@ -431,6 +436,8 @@ struct ast_device *ast_device_create(const struct drm_driver *drv,
int ret = 0;
void __iomem *regs;
void __iomem *ioregs;
+ enum ast_config_mode config_mode;
+ enum ast_chip chip;
ast = devm_drm_dev_alloc(&pdev->dev, drv, struct ast_device, base);
if (IS_ERR(ast))
@@ -502,10 +509,13 @@ struct ast_device *ast_device_create(const struct drm_driver *drv,
if (ret)
return ERR_PTR(ret);
- ret = ast_device_config_init(ast);
+ ret = ast_detect_chip(pdev, regs, ioregs, &chip, &config_mode);
if (ret)
return ERR_PTR(ret);
+ ast->chip = chip;
+ ast->config_mode = config_mode;
+
ast_detect_widescreen(ast);
ast_detect_tx_chip(ast, need_post);
--
2.42.0
More information about the dri-devel
mailing list