[PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C

[Flavio Suligoi]

Hi Daniel,

...

> > +required:
> > +  - compatible
> > +  - reg
> > +  - max-brightness
> 
> Why is this mandatory?
> 
> There's no point in setting max-brightness when running in I2C mode (max-
> brightness should default to 31 in that case).
> 
> 
> > +  - default-brightness
> 
> Again. I'm not clear why this needs to be mandatory.
> 
> 

Ok, you are right, I'll remove max-brightness and default-brightness from required properties list.
I think to change these properties, for the pwm dimming, into a clearer:

- brightness-levels (uint32) 
- default-brightness-levels (uint32).

For example:

  brightness-levels:
    description:
      Number of brightness levels. The actual brightness
      level (PWM duty cycle) will be interpolated from 0 to this value.
      0 means a  0% duty cycle (darkest/off), while the brightness-levels represents
      a 100% duty cycle (brightest).
    $ref: /schemas/types.yaml#/definitions/uint32

  default-brightness-level:
    description:
      The default brightness level (from 0 to brightness-levels)
    $ref: /schemas/types.yaml#/definitions/uint32

Example:
brightness-levels = <10>;
default-brightness-level = <6>;

What do you think about this solution?

> Daniel.

Thanks for your help,
Flavio