[RFC PATCH 5/8] drm/panel: nv3052c: Allow specifying registers per panel

[Jessica Zhang]

On 9/11/2023 2:02 AM, John Watts wrote:
> Panel initialization registers are per-display and not tied to the
> controller itself. Different panels will specify their own registers.
> Attach the sequences to the panel info struct so future panels
> can specify their own sequences.
> 
> Signed-off-by: John Watts <contact at jookia.org>
> ---
>   .../gpu/drm/panel/panel-newvision-nv3052c.c   | 25 ++++++++++++-------
>   1 file changed, 16 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> index 307335d0f1fc..b2ad9b3a5eb7 100644
> --- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> +++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> @@ -20,11 +20,18 @@
>   #include <drm/drm_modes.h>
>   #include <drm/drm_panel.h>
>   
> +struct nv3052c_reg {
> +	u8 cmd;
> +	u8 val;
> +};
> +
>   struct nv3052c_panel_info {
>   	const struct drm_display_mode *display_modes;
>   	unsigned int num_modes;
>   	u16 width_mm, height_mm;
>   	u32 bus_format, bus_flags;
> +	const struct nv3052c_reg *panel_regs;
> +	int panel_regs_len;

Hi John,

Having a separate panel_regs_len field seems a bit unnecessary to me.

Looks like it's only being called in the panel prepare() and I don't 
seen any reason why we shouldn't just call the ARRAY_SIZE() macro there.

Thanks,

Jessica Zhang

>   };
>   
>   struct nv3052c {
> @@ -36,12 +43,7 @@ struct nv3052c {
>   	struct gpio_desc *reset_gpio;
>   };
>   
> -struct nv3052c_reg {
> -	u8 cmd;
> -	u8 val;
> -};
> -
> -static const struct nv3052c_reg nv3052c_panel_regs[] = {
> +static const struct nv3052c_reg ltk035c5444t_panel_regs[] = {
>   	// EXTC Command set enable, select page 1
>   	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 },
>   	// Mostly unknown registers
> @@ -244,6 +246,7 @@ static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
>   static int nv3052c_prepare(struct drm_panel *panel)
>   {
>   	struct nv3052c *priv = to_nv3052c(panel);
> +	const struct nv3052c_reg *panel_regs = priv->panel_info->panel_regs;
>   	struct mipi_dbi *dbi = &priv->dbi;
>   	unsigned int i;
>   	int err;
> @@ -260,9 +263,11 @@ static int nv3052c_prepare(struct drm_panel *panel)
>   	gpiod_set_value_cansleep(priv->reset_gpio, 0);
>   	msleep(150);
>   
> -	for (i = 0; i < ARRAY_SIZE(nv3052c_panel_regs); i++) {
> -		err = mipi_dbi_command(dbi, nv3052c_panel_regs[i].cmd,
> -				       nv3052c_panel_regs[i].val);
> +	int panel_regs_len = priv->panel_info->panel_regs_len;
> +
> +	for (i = 0; i < panel_regs_len; i++) {
> +		err = mipi_dbi_command(dbi, panel_regs[i].cmd,
> +				       panel_regs[i].val);
>   
>   		if (err) {
>   			dev_err(priv->dev, "Unable to set register: %d\n", err);
> @@ -466,6 +471,8 @@ static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
>   	.height_mm = 64,
>   	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
>   	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> +	.panel_regs = ltk035c5444t_panel_regs,
> +	.panel_regs_len = ARRAY_SIZE(ltk035c5444t_panel_regs),
>   };
>   
>   static const struct spi_device_id nv3052c_ids[] = {
> -- 
> 2.42.0
>