[RFC PATCH 1/3] drm/msm/dpu: add support for MSM8953

Luca Weiss luca at z3ntu.xyz
Fri Sep 29 20:52:48 UTC 2023


On Samstag, 23. September 2023 23:49:10 CEST Dmitry Baryshkov wrote:
> Experimental support for MSM8953, which has MDP5 v1.16. It looks like
> trimmed down version of MSM8996. Less SSPP, LM and PP blocks. No DSC,
> etc.
> 

Hi Dmitry,

As written on IRC, on sdm632-fairphone-fp3 with this DPU patches the screen is
initializing and displaying stuff :) But there's some errors, which presumably
are the reason that the screen is only updating a few times per second.

[   22.774205] [drm:dpu_kms_hw_init:1164] dpu hardware revision:0x10100000
[   23.099806] [drm:_dpu_encoder_phys_cmd_wait_for_ctl_start:657] [dpu error]enc31 intf1 ctl start interrupt wait failed
[   23.099821] [drm:dpu_kms_wait_for_commit_done:495] [dpu error]wait for commit done returned -22

These messages appear about 13 times per second but as I mentioned, the screen
*is* updating (slowly) there.

Also you for sure forgot to add "qcom,msm8953-mdp5" to the
msm_mdp5_dpu_migration list, without this DPU is never even considered for
8953.

Regards
Luca

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  .../msm/disp/dpu1/catalog/dpu_1_16_msm8953.h  | 221 ++++++++++++++++++
>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    |  12 +
>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
>  4 files changed, 235 insertions(+)
>  create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h
> b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h new file mode
> 100644
> index 000000000000..6944bfa4568a
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h
> @@ -0,0 +1,221 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#ifndef _DPU_1_16_MSM8953_H
> +#define _DPU_1_16_MSM8953_H
> +
> +static const struct dpu_caps msm8953_dpu_caps = {
> +	.max_mixer_width = DEFAULT_DPU_LINE_WIDTH,
> +	.max_mixer_blendstages = 0x4,
> +	.max_linewidth = DEFAULT_DPU_LINE_WIDTH,
> +	.pixel_ram_size = 40 * 1024,
> +	.max_hdeci_exp = MAX_HORZ_DECIMATION,
> +	.max_vdeci_exp = MAX_VERT_DECIMATION,
> +};
> +
> +static const struct dpu_mdp_cfg msm8953_mdp[] = {
> +	{
> +		.name = "top_0",
> +		.base = 0x0, .len = 0x454,
> +		.features = BIT(DPU_MDP_VSYNC_SEL),
> +		.clk_ctrls = {
> +			[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
> +			[DPU_CLK_CTRL_RGB0] = { .reg_off = 0x2ac, .bit_off = 4 },
> +			[DPU_CLK_CTRL_RGB1] = { .reg_off = 0x2b4, .bit_off = 4 },
> +			[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
> +			[DPU_CLK_CTRL_CURSOR0] = { .reg_off = 0x3a8, .bit_off = 16 },
> +		},
> +	},
> +};
> +
> +static const struct dpu_ctl_cfg msm8953_ctl[] = {
> +	{
> +		.name = "ctl_0", .id = CTL_0,
> +		.base = 0x1000, .len = 0x64,
> +		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
> +	}, {
> +		.name = "ctl_1", .id = CTL_1,
> +		.base = 0x1200, .len = 0x64,
> +		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
> +	}, {
> +		.name = "ctl_2", .id = CTL_2,
> +		.base = 0x1400, .len = 0x64,
> +		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
> +	},
> +};
> +
> +static const struct dpu_sspp_cfg msm8953_sspp[] = {
> +	{
> +		.name = "sspp_0", .id = SSPP_VIG0,
> +		.base = 0x4000, .len = 0x150,
> +		.features = VIG_MSM8953_MASK,
> +		.sblk = &dpu_vig_sblk_qseed2,
> +		.xin_id = 0,
> +		.type = SSPP_TYPE_VIG,
> +		.clk_ctrl = DPU_CLK_CTRL_VIG0,
> +	}, {
> +		.name = "sspp_4", .id = SSPP_RGB0,
> +		.base = 0x14000, .len = 0x150,
> +		.features = RGB_MSM8953_MASK,
> +		.sblk = &dpu_rgb_sblk,
> +		.xin_id = 1,
> +		.type = SSPP_TYPE_RGB,
> +		.clk_ctrl = DPU_CLK_CTRL_RGB0,
> +	}, {
> +		.name = "sspp_5", .id = SSPP_RGB1,
> +		.base = 0x16000, .len = 0x150,
> +		.features = RGB_MSM8953_MASK,
> +		.sblk = &dpu_rgb_sblk,
> +		.xin_id = 5,
> +		.type = SSPP_TYPE_RGB,
> +		.clk_ctrl = DPU_CLK_CTRL_RGB1,
> +	}, {
> +		.name = "sspp_8", .id = SSPP_DMA0,
> +		.base = 0x24000, .len = 0x150,
> +		.features = DMA_MSM8953_MASK | BIT(DPU_SSPP_CURSOR),
> +		.sblk = &dpu_dma_sblk,
> +		.xin_id = 2,
> +		.type = SSPP_TYPE_DMA,
> +		.clk_ctrl = DPU_CLK_CTRL_DMA0,
> +	},
> +};
> +
> +static const struct dpu_lm_cfg msm8953_lm[] = {
> +	{
> +		.name = "lm_0", .id = LM_0,
> +		.base = 0x44000, .len = 0x320,
> +		.sblk = &msm8998_lm_sblk,
> +		.lm_pair = LM_1,
> +		.pingpong = PINGPONG_0,
> +		.dspp = DSPP_0,
> +	}, {
> +		.name = "lm_1", .id = LM_1,
> +		.base = 0x45000, .len = 0x320,
> +		.sblk = &msm8998_lm_sblk,
> +		.lm_pair = LM_0,
> +		.pingpong = PINGPONG_1,
> +	},
> +};
> +
> +static const struct dpu_pingpong_cfg msm8953_pp[] = {
> +	{
> +		.name = "pingpong_0", .id = PINGPONG_0,
> +		.base = 0x70000, .len = 0xd4,
> +		.features = PINGPONG_MSM8996_MASK,
> +		.sblk = &msm8996_pp_sblk,
> +		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> +		.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
> +	}, {
> +		.name = "pingpong_1", .id = PINGPONG_1,
> +		.base = 0x70800, .len = 0xd4,
> +		.features = PINGPONG_MSM8996_MASK,
> +		.sblk = &msm8996_pp_sblk,
> +		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
> +		.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13),
> +	},
> +};
> +
> +static const struct dpu_dspp_cfg msm8953_dspp[] = {
> +	{
> +		.name = "dspp_0", .id = DSPP_0,
> +		.base = 0x54000, .len = 0x1800,
> +		.features = DSPP_SC7180_MASK,
> +		.sblk = &msm8998_dspp_sblk,
> +	},
> +};
> +
> +static const struct dpu_intf_cfg msm8953_intf[] = {
> +	{
> +		.name = "intf_0", .id = INTF_0,
> +		.base = 0x6a000, .len = 0x268,
> +		.type = INTF_NONE,
> +		.prog_fetch_lines_worst_case = 14,
> +		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
> +		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25),
> +		.intr_tear_rd_ptr = -1,
> +	}, {
> +		.name = "intf_1", .id = INTF_1,
> +		.base = 0x6a800, .len = 0x268,
> +		.type = INTF_DSI,
> +		.controller_id = MSM_DSI_CONTROLLER_0,
> +		.prog_fetch_lines_worst_case = 14,
> +		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
> +		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
> +		.intr_tear_rd_ptr = -1,
> +	}, {
> +		.name = "intf_2", .id = INTF_2,
> +		.base = 0x6b000, .len = 0x268,
> +		.type = INTF_DSI,
> +		.controller_id = MSM_DSI_CONTROLLER_1,
> +		.prog_fetch_lines_worst_case = 14,
> +		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 28),
> +		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 29),
> +		.intr_tear_rd_ptr = -1,
> +	},
> +};
> +
> +static const struct dpu_perf_cfg msm8953_perf_data = {
> +	.max_bw_low = 3400000,
> +	.max_bw_high = 3400000,
> +	.min_core_ib = 2400000,
> +	.min_llcc_ib = 0, /* No LLCC on this SoC */
> +	.min_dram_ib = 800000,
> +	.undersized_prefill_lines = 2,
> +	.xtra_prefill_lines = 2,
> +	.dest_scale_prefill_lines = 3,
> +	.macrotile_prefill_lines = 4,
> +	.yuv_nv12_prefill_lines = 8,
> +	.linear_prefill_lines = 1,
> +	.downscaling_prefill_lines = 1,
> +	.amortizable_threshold = 25,
> +	.min_prefill_lines = 14,
> +	.danger_lut_tbl = {0xf, 0xffff, 0x0},
> +	.safe_lut_tbl = {0xfffc, 0xff00, 0xffff},
> +	.qos_lut_tbl = {
> +		{.nentry = ARRAY_SIZE(msm8998_qos_linear),
> +		.entries = msm8998_qos_linear
> +		},
> +		{.nentry = ARRAY_SIZE(msm8998_qos_macrotile),
> +		.entries = msm8998_qos_macrotile
> +		},
> +		{.nentry = ARRAY_SIZE(msm8998_qos_nrt),
> +		.entries = msm8998_qos_nrt
> +		},
> +	},
> +	.cdp_cfg = {
> +		{.rd_enable = 1, .wr_enable = 1},
> +		{.rd_enable = 1, .wr_enable = 0}
> +	},
> +	.clk_inefficiency_factor = 105,
> +	.bw_inefficiency_factor = 120,
> +};
> +
> +static const struct dpu_mdss_version msm8953_mdss_ver = {
> +	.core_major_ver = 1,
> +	.core_minor_ver = 16,
> +};
> +
> +const struct dpu_mdss_cfg dpu_msm8953_cfg = {
> +	.mdss_ver = &msm8953_mdss_ver,
> +	.caps = &msm8953_dpu_caps,
> +	.mdp = msm8953_mdp,
> +	.ctl_count = ARRAY_SIZE(msm8953_ctl),
> +	.ctl = msm8953_ctl,
> +	.sspp_count = ARRAY_SIZE(msm8953_sspp),
> +	.sspp = msm8953_sspp,
> +	.mixer_count = ARRAY_SIZE(msm8953_lm),
> +	.mixer = msm8953_lm,
> +	.dspp_count = ARRAY_SIZE(msm8953_dspp),
> +	.dspp = msm8953_dspp,
> +	.pingpong_count = ARRAY_SIZE(msm8953_pp),
> +	.pingpong = msm8953_pp,
> +	.intf_count = ARRAY_SIZE(msm8953_intf),
> +	.intf = msm8953_intf,
> +	.vbif_count = ARRAY_SIZE(msm8996_vbif),
> +	.vbif = msm8996_vbif,
> +	.perf = &msm8953_perf_data,
> +};
> +
> +#endif
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index
> 5446a86308bf..20e31115e26d 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -21,6 +21,11 @@
>  	(VIG_BASE_MASK | \
>  	BIT(DPU_SSPP_CSC_10BIT))
> 
> +#define VIG_MSM8953_MASK \
> +	(BIT(DPU_SSPP_QOS) |\
> +	 BIT(DPU_SSPP_SCALER_QSEED2) |\
> +	 BIT(DPU_SSPP_CSC))
> +
>  #define VIG_MSM8996_MASK \
>  	(BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_CDP) |\
>  	 BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_SCALER_QSEED2) |\
> @@ -37,6 +42,9 @@
> 
>  #define VIG_QCM2290_MASK (VIG_BASE_MASK | BIT(DPU_SSPP_QOS_8LVL))
> 
> +#define DMA_MSM8953_MASK \
> +	(BIT(DPU_SSPP_QOS))
> +
>  #define DMA_MSM8996_MASK \
>  	(BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_CDP))
> 
> @@ -71,6 +79,9 @@
>  #define DMA_CURSOR_MSM8998_MASK \
>  	(DMA_MSM8998_MASK | BIT(DPU_SSPP_CURSOR))
> 
> +#define RGB_MSM8953_MASK \
> +	(BIT(DPU_SSPP_QOS))
> +
>  #define RGB_MSM8996_MASK \
>  	(BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_CDP) |\
>  	 BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_SCALER_RGB))
> @@ -705,6 +716,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] =
> { *************************************************************/
> 
>  #include "catalog/dpu_1_7_msm8996.h"
> +#include "catalog/dpu_1_16_msm8953.h"
> 
>  #include "catalog/dpu_3_0_msm8998.h"
>  #include "catalog/dpu_3_2_sdm660.h"
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index
> 8c3c6cd2a186..58891a19d2b0 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -822,6 +822,7 @@ struct dpu_mdss_cfg {
>  	const struct dpu_format_extended *vig_formats;
>  };
> 
> +extern const struct dpu_mdss_cfg dpu_msm8953_cfg;
>  extern const struct dpu_mdss_cfg dpu_msm8996_cfg;
>  extern const struct dpu_mdss_cfg dpu_msm8998_cfg;
>  extern const struct dpu_mdss_cfg dpu_sdm630_cfg;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 288458dcf234..5099618bfe11
> 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1415,6 +1415,7 @@ static const struct dev_pm_ops dpu_pm_ops = {
>  };
> 
>  static const struct of_device_id dpu_dt_match[] = {
> +	{ .compatible = "qcom,msm8953-mdp5", .data = &dpu_msm8953_cfg, },
>  	{ .compatible = "qcom,msm8996-mdp5", .data = &dpu_msm8996_cfg, },
>  	{ .compatible = "qcom,msm8998-dpu", .data = &dpu_msm8998_cfg, },
>  	{ .compatible = "qcom,qcm2290-dpu", .data = &dpu_qcm2290_cfg, },






More information about the dri-devel mailing list