[PATCH 5/6] drm/panel: novatek-nt36672a: stop calling regulator_set_load manually

[Neil Armstrong]

On 04/04/2024 12:08, Dmitry Baryshkov wrote:
> Use .init_load_uA part of the bulk regulator API instead of calling
> register_set_load() manually.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>   drivers/gpu/drm/panel/panel-novatek-nt36672a.c | 11 +++--------
>   1 file changed, 3 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
> index 33fb3d715e54..3886372415c2 100644
> --- a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
> +++ b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
> @@ -605,21 +605,16 @@ static int nt36672a_panel_add(struct nt36672a_panel *pinfo)
>   	struct device *dev = &pinfo->link->dev;
>   	int i, ret;
>   
> -	for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++)
> +	for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) {
>   		pinfo->supplies[i].supply = nt36672a_regulator_names[i];
> +		pinfo->supplies[i].init_load_uA = nt36672a_regulator_enable_loads[i];
> +	}
>   
>   	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pinfo->supplies),
>   				      pinfo->supplies);
>   	if (ret < 0)
>   		return dev_err_probe(dev, ret, "failed to get regulators\n");
>   
> -	for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) {
> -		ret = regulator_set_load(pinfo->supplies[i].consumer,
> -					 nt36672a_regulator_enable_loads[i]);
> -		if (ret)
> -			return dev_err_probe(dev, ret, "failed to set regulator enable loads\n");
> -	}
> -
>   	pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>   	if (IS_ERR(pinfo->reset_gpio))
>   		return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio),
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>