[PATCH v3 01/10] dt-bindings: display: bridge: tc358775: make stby gpio optional

[Tony Lindgren]

From: Michael Walle <mwalle at kernel.org>

For a normal operation, the stby GPIO is not needed.

The reset pin is required because once the PPI (PHY protocol interface)
is started, it can only be stopped by asserting the reset pin.

Signed-off-by: Michael Walle <mwalle at kernel.org>
[tony at atomide.com: dropped regulator related changes]
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 .../devicetree/bindings/display/bridge/toshiba,tc358775.yaml     | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -70,7 +70,6 @@ required:
   - reg
   - vdd-supply
   - vddio-supply
-  - stby-gpios
   - reset-gpios
   - ports
 
-- 
2.43.0