[PATCH v2 3/4] ARM: dts: stm32: enable display support on stm32mp135f-dk board

Raphael Gallais-Pou raphael.gallais-pou at foss.st.com
Sat Feb 17 11:02:57 UTC 2024


Link panel and display controller.
Enable panel, backlight and display controller.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>

---
Changes in v2:
  - Fixed dtbs_check warnings :
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-backlight: 'default-brightness-level' does not match any of the regexes: 'pinctrl-[0-9]+'
  from schema $id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: data-mapping:0: 'bgr666' is not one of ['jeida-18', 'jeida-24', 'vesa-24']
  from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: compatible: ['rocktech,rk043fn48h', 'panel-dpi'] is too long
  from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: data-mapping: False schema does not allow ['bgr666']
  from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
---
 arch/arm/boot/dts/st/stm32mp135f-dk.dts | 53 +++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index eea740d097c7..c918f332cbfd 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -66,6 +66,46 @@ led-blue {
 			default-state = "off";
 		};
 	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "rocktech,rk043fn48h";
+		enable-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>;
+		backlight = <&panel_backlight>;
+		power-supply = <&scmi_v3v3_sw>;
+		status = "okay";
+
+		width-mm = <105>;
+		height-mm = <67>;
+
+		panel-timing {
+			clock-frequency = <10000000>;
+			hactive = <480>;
+			hback-porch = <43>;
+			hfront-porch = <10>;
+			hsync-len = <1>;
+			hsync-active = <0>;
+			vactive = <272>;
+			vback-porch = <26>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
 };
 
 &adc_1 {
@@ -160,6 +200,19 @@ &iwdg2 {
 	status = "okay";
 };
 
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_sleep_pins_a>;
+	status = "okay";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
 &rtc {
 	status = "okay";
 };

-- 
2.25.1



More information about the dri-devel mailing list