[PATCH] fbdev/intelfb: Remove driver
Thomas Zimmermann
tzimmermann at suse.de
Mon Jan 8 08:53:04 UTC 2024
Hi
Am 05.01.24 um 11:20 schrieb Maik Broemme:
> Hi Thomas,
>
> looks good to me and I agree with removing it, no need to maintain such
> legacy piece of code anymore.
Fantastic! Thank you so much.
Best regards
Thomas
>
> On Jan 05, 2024, at 10:11, Thomas Zimmermann <tzimmermann at suse.de> wrote:
>> From looking at the PCI IDs, every device supported by intelfb is
>> also supported by i915. Anyone still using intelfb should please
>> move on to i915, which does everything intelfb does but better.
>>
>> Removing intelfb is motivated by the driver's excessive use of the
>> global screen_info state. The state belongs to architecture and
>> firmware code; device drivers should not attempt to access it. But
>> fixing intelfb would require a significant change in the driver's
>> probing logic. As intelfb has been obsolete for nearly 2 decades,
>> it is probably not worth the effort. Let's just remove it. Also
>> remove the related documentation.
>>
>> Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
>> ---
>> Documentation/fb/index.rst | 1 -
>> Documentation/fb/intelfb.rst | 155 --
>> .../userspace-api/ioctl/ioctl-number.rst | 1 -
>> MAINTAINERS | 7 -
>> drivers/Makefile | 3 +-
>> drivers/video/fbdev/Kconfig | 39 -
>> drivers/video/fbdev/intelfb/Makefile | 8 -
>> drivers/video/fbdev/intelfb/intelfb.h | 382 ---
>> drivers/video/fbdev/intelfb/intelfb_i2c.c | 209 --
>> drivers/video/fbdev/intelfb/intelfbdrv.c | 1680 -------------
>> drivers/video/fbdev/intelfb/intelfbhw.c | 2115 -----------------
>> drivers/video/fbdev/intelfb/intelfbhw.h | 609 -----
>> 12 files changed, 1 insertion(+), 5208 deletions(-)
>> delete mode 100644 Documentation/fb/intelfb.rst
>> delete mode 100644 drivers/video/fbdev/intelfb/Makefile
>> delete mode 100644 drivers/video/fbdev/intelfb/intelfb.h
>> delete mode 100644 drivers/video/fbdev/intelfb/intelfb_i2c.c
>> delete mode 100644 drivers/video/fbdev/intelfb/intelfbdrv.c
>> delete mode 100644 drivers/video/fbdev/intelfb/intelfbhw.c
>> delete mode 100644 drivers/video/fbdev/intelfb/intelfbhw.h
>>
>> diff --git a/Documentation/fb/index.rst b/Documentation/fb/index.rst
>> index baf02393d8ee..33e3c49f8856 100644
>> --- a/Documentation/fb/index.rst
>> +++ b/Documentation/fb/index.rst
>> @@ -19,7 +19,6 @@ Frame Buffer
>> framebuffer
>> gxfb
>> intel810
>> - intelfb
>> internals
>> lxfb
>> matroxfb
>> diff --git a/Documentation/fb/intelfb.rst b/Documentation/fb/intelfb.rst
>> deleted file mode 100644
>> index e2d0903f4efb..000000000000
>> --- a/Documentation/fb/intelfb.rst
>> +++ /dev/null
>> @@ -1,155 +0,0 @@
>> -=============================================================
>> -Intel 830M/845G/852GM/855GM/865G/915G/945G Framebuffer driver
>> -=============================================================
>> -
>> -A. Introduction
>> -===============
>> -
>> -This is a framebuffer driver for various Intel 8xx/9xx compatible
>> -graphics devices. These would include:
>> -
>> - - Intel 830M
>> - - Intel 845G
>> - - Intel 852GM
>> - - Intel 855GM
>> - - Intel 865G
>> - - Intel 915G
>> - - Intel 915GM
>> - - Intel 945G
>> - - Intel 945GM
>> - - Intel 945GME
>> - - Intel 965G
>> - - Intel 965GM
>> -
>> -B. List of available options
>> -=============================
>> -
>> - a. "video=intelfb"
>> - enables the intelfb driver
>> -
>> - Recommendation: required
>> -
>> - b. "mode=<xres>x<yres>[-<bpp>][@<refresh>]"
>> - select mode
>> -
>> - Recommendation: user preference
>> - (default = 1024x768-32 at 70)
>> -
>> - c. "vram=<value>"
>> - select amount of system RAM in MB to allocate for the video memory
>> - if not enough RAM was already allocated by the BIOS.
>> -
>> - Recommendation: 1 - 4 MB.
>> - (default = 4 MB)
>> -
>> - d. "voffset=<value>"
>> - select at what offset in MB of the logical memory to allocate the
>> - framebuffer memory. The intent is to avoid the memory blocks
>> - used by standard graphics applications (XFree86). Depending on your
>> - usage, adjust the value up or down, (0 for maximum usage, 63/127 MB
>> - for the least amount). Note, an arbitrary setting may conflict
>> - with XFree86.
>> -
>> - Recommendation: do not set
>> - (default = 48 MB)
>> -
>> - e. "accel"
>> - enable text acceleration. This can be enabled/reenabled anytime
>> - by using 'fbset -accel true/false'.
>> -
>> - Recommendation: enable
>> - (default = set)
>> -
>> - f. "hwcursor"
>> - enable cursor acceleration.
>> -
>> - Recommendation: enable
>> - (default = set)
>> -
>> - g. "mtrr"
>> - enable MTRR. This allows data transfers to the framebuffer memory
>> - to occur in bursts which can significantly increase performance.
>> - Not very helpful with the intel chips because of 'shared memory'.
>> -
>> - Recommendation: set
>> - (default = set)
>> -
>> - h. "fixed"
>> - disable mode switching.
>> -
>> - Recommendation: do not set
>> - (default = not set)
>> -
>> - The binary parameters can be unset with a "no" prefix, example "noaccel".
>> - The default parameter (not named) is the mode.
>> -
>> -C. Kernel booting
>> -=================
>> -
>> -Separate each option/option-pair by commas (,) and the option from its value
>> -with an equals sign (=) as in the following::
>> -
>> - video=intelfb:option1,option2=value2
>> -
>> -Sample Usage
>> -------------
>> -
>> -In /etc/lilo.conf, add the line::
>> -
>> - append="video=intelfb:mode=800x600-32 at 75,accel,hwcursor,vram=8"
>> -
>> -This will initialize the framebuffer to 800x600 at 32bpp and 75Hz. The
>> -framebuffer will use 8 MB of System RAM. hw acceleration of text and cursor
>> -will be enabled.
>> -
>> -Remarks
>> --------
>> -
>> -If setting this parameter doesn't work (you stay in a 80x25 text-mode),
>> -you might need to set the "vga=<mode>" parameter too - see vesafb.txt
>> -in this directory.
>> -
>> -
>> -D. Module options
>> -==================
>> -
>> -The module parameters are essentially similar to the kernel
>> -parameters. The main difference is that you need to include a Boolean value
>> -(1 for TRUE, and 0 for FALSE) for those options which don't need a value.
>> -
>> -Example, to enable MTRR, include "mtrr=1".
>> -
>> -Sample Usage
>> -------------
>> -
>> -Using the same setup as described above, load the module like this::
>> -
>> - modprobe intelfb mode=800x600-32 at 75 vram=8 accel=1 hwcursor=1
>> -
>> -Or just add the following to a configuration file in /etc/modprobe.d/::
>> -
>> - options intelfb mode=800x600-32 at 75 vram=8 accel=1 hwcursor=1
>> -
>> -and just do a::
>> -
>> - modprobe intelfb
>> -
>> -
>> -E. Acknowledgment:
>> -===================
>> -
>> - 1. Geert Uytterhoeven - his excellent howto and the virtual
>> - framebuffer driver code made this possible.
>> -
>> - 2. Jeff Hartmann for his agpgart code.
>> -
>> - 3. David Dawes for his original kernel 2.4 code.
>> -
>> - 4. The X developers. Insights were provided just by reading the
>> - XFree86 source code.
>> -
>> - 5. Antonino A. Daplas for his inspiring i810fb driver.
>> -
>> - 6. Andrew Morton for his kernel patches maintenance.
>> -
>> -Sylvain
>> diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
>> index 4ea5b837399a..08a1e2388614 100644
>> --- a/Documentation/userspace-api/ioctl/ioctl-number.rst
>> +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
>> @@ -128,7 +128,6 @@ Code Seq# Include File Comments
>> 'F' all linux/fb.h conflict!
>> 'F' 01-02 drivers/scsi/pmcraid.h conflict!
>> 'F' 20 drivers/video/fsl-diu-fb.h conflict!
>> -'F' 20 drivers/video/intelfb/intelfb.h conflict!
>> 'F' 20 linux/ivtvfb.h conflict!
>> 'F' 20 linux/matroxfb.h conflict!
>> 'F' 20 drivers/video/aty/atyfb_base.c conflict!
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index d138317c9417..48450a0f6a8c 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -10666,13 +10666,6 @@ S: Supported
>> F: drivers/infiniband/hw/irdma/
>> F: include/uapi/rdma/irdma-abi.h
>>
>> -INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
>> -M: Maik Broemme <mbroemme at libmpq.org>
>> -L: linux-fbdev at vger.kernel.org
>> -S: Maintained
>> -F: Documentation/fb/intelfb.rst
>> -F: drivers/video/fbdev/intelfb/
>> -
>> INTEL GPIO DRIVERS
>> M: Andy Shevchenko <andy at kernel.org>
>> L: linux-gpio at vger.kernel.org
>> diff --git a/drivers/Makefile b/drivers/Makefile
>> index d828329c268d..37fd6ce3bd7f 100644
>> --- a/drivers/Makefile
>> +++ b/drivers/Makefile
>> @@ -71,9 +71,8 @@ obj-y += gpu/
>>
>> obj-$(CONFIG_CONNECTOR) += connector/
>>
>> -# i810fb and intelfb depend on char/agp/
>> +# i810fb depends on char/agp/
>> obj-$(CONFIG_FB_I810) += video/fbdev/i810/
>> -obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
>>
>> obj-$(CONFIG_PARPORT) += parport/
>> obj-y += base/ block/ misc/ mfd/ nfc/
>> diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
>> index d5909a9206ff..a57d8312667b 100644
>> --- a/drivers/video/fbdev/Kconfig
>> +++ b/drivers/video/fbdev/Kconfig
>> @@ -854,45 +854,6 @@ config FB_CARILLO_RANCH
>> help
>> This driver supports the LE80578 (Carillo Ranch) board
>>
>> -config FB_INTEL
>> - tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
>> - depends on FB && PCI && X86 && AGP_INTEL && EXPERT
>> - select FB_CFB_FILLRECT
>> - select FB_CFB_COPYAREA
>> - select FB_CFB_IMAGEBLIT
>> - select FB_IOMEM_FOPS
>> - select FB_MODE_HELPERS
>> - select BOOT_VESA_SUPPORT if FB_INTEL = y
>> - select VIDEO_NOMODESET
>> - depends on !DRM_I915
>> - help
>> - This driver supports the on-board graphics built in to the Intel
>> - 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
>> - Say Y if you have and plan to use such a board.
>> -
>> - To make FB_INTEL=Y work you need to say AGP_INTEL=y too.
>> -
>> - To compile this driver as a module, choose M here: the
>> - module will be called intelfb.
>> -
>> - For more information, please read <file:Documentation/fb/intelfb.rst>
>> -
>> -config FB_INTEL_DEBUG
>> - bool "Intel driver Debug Messages"
>> - depends on FB_INTEL
>> - help
>> - Say Y here if you want the Intel driver to output all sorts
>> - of debugging information to provide to the maintainer when
>> - something goes wrong.
>> -
>> -config FB_INTEL_I2C
>> - bool "DDC/I2C for Intel framebuffer support"
>> - depends on FB_INTEL
>> - select FB_DDC
>> - default y
>> - help
>> - Say Y here if you want DDC/I2C support for your on-board Intel graphics.
>> -
>> config FB_MATROX
>> tristate "Matrox acceleration"
>> depends on FB && PCI
>> diff --git a/drivers/video/fbdev/intelfb/Makefile b/drivers/video/fbdev/intelfb/Makefile
>> deleted file mode 100644
>> index 7ff2debb31af..000000000000
>> --- a/drivers/video/fbdev/intelfb/Makefile
>> +++ /dev/null
>> @@ -1,8 +0,0 @@
>> -# SPDX-License-Identifier: GPL-2.0
>> -obj-$(CONFIG_FB_INTEL) += intelfb.o
>> -
>> -intelfb-y := intelfbdrv.o intelfbhw.o
>> -intelfb-$(CONFIG_FB_INTEL_I2C) += intelfb_i2c.o
>> -intelfb-objs := $(intelfb-y)
>> -
>> -ccflags-$(CONFIG_FB_INTEL_DEBUG) := -DDEBUG -DREGDUMP
>> diff --git a/drivers/video/fbdev/intelfb/intelfb.h b/drivers/video/fbdev/intelfb/intelfb.h
>> deleted file mode 100644
>> index 5de703902a21..000000000000
>> --- a/drivers/video/fbdev/intelfb/intelfb.h
>> +++ /dev/null
>> @@ -1,382 +0,0 @@
>> -/* SPDX-License-Identifier: GPL-2.0 */
>> -#ifndef _INTELFB_H
>> -#define _INTELFB_H
>> -
>> -/* $DHD: intelfb/intelfb.h,v 1.40 2003/06/27 15:06:25 dawes Exp $ */
>> -
>> -#include <linux/agp_backend.h>
>> -#include <linux/fb.h>
>> -
>> -#ifdef CONFIG_FB_INTEL_I2C
>> -#include <linux/i2c.h>
>> -#include <linux/i2c-algo-bit.h>
>> -#endif
>> -
>> -/*** Version/name ***/
>> -#define INTELFB_VERSION "0.9.6"
>> -#define INTELFB_MODULE_NAME "intelfb"
>> -#define SUPPORTED_CHIPSETS "830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM"
>> -
>> -
>> -/*** Debug/feature defines ***/
>> -
>> -#ifndef DEBUG
>> -#define DEBUG 0
>> -#endif
>> -
>> -#ifndef VERBOSE
>> -#define VERBOSE 0
>> -#endif
>> -
>> -#ifndef REGDUMP
>> -#define REGDUMP 0
>> -#endif
>> -
>> -#ifndef DETECT_VGA_CLASS_ONLY
>> -#define DETECT_VGA_CLASS_ONLY 1
>> -#endif
>> -
>> -#ifndef ALLOCATE_FOR_PANNING
>> -#define ALLOCATE_FOR_PANNING 1
>> -#endif
>> -
>> -#ifndef PREFERRED_MODE
>> -#define PREFERRED_MODE "1024x768-32 at 70"
>> -#endif
>> -
>> -/*** hw-related values ***/
>> -
>> -/* Resource Allocation */
>> -#define INTELFB_FB_ACQUIRED 1
>> -#define INTELFB_MMIO_ACQUIRED 2
>> -
>> -/* PCI ids for supported devices */
>> -#define PCI_DEVICE_ID_INTEL_830M 0x3577
>> -#define PCI_DEVICE_ID_INTEL_845G 0x2562
>> -#define PCI_DEVICE_ID_INTEL_85XGM 0x3582
>> -#define PCI_DEVICE_ID_INTEL_854 0x358E
>> -#define PCI_DEVICE_ID_INTEL_865G 0x2572
>> -#define PCI_DEVICE_ID_INTEL_915G 0x2582
>> -#define PCI_DEVICE_ID_INTEL_915GM 0x2592
>> -#define PCI_DEVICE_ID_INTEL_945G 0x2772
>> -#define PCI_DEVICE_ID_INTEL_945GM 0x27A2
>> -#define PCI_DEVICE_ID_INTEL_945GME 0x27AE
>> -#define PCI_DEVICE_ID_INTEL_965G 0x29A2
>> -#define PCI_DEVICE_ID_INTEL_965GM 0x2A02
>> -
>> -/* Size of MMIO region */
>> -#define INTEL_REG_SIZE 0x80000
>> -
>> -#define STRIDE_ALIGNMENT 16
>> -#define STRIDE_ALIGNMENT_I9XX 64
>> -
>> -#define PALETTE_8_ENTRIES 256
>> -
>> -
>> -/*** Macros ***/
>> -
>> -/* basic arithmetic */
>> -#define KB(x) ((x) * 1024)
>> -#define MB(x) ((x) * 1024 * 1024)
>> -#define BtoKB(x) ((x) / 1024)
>> -#define BtoMB(x) ((x) / 1024 / 1024)
>> -
>> -#define GTT_PAGE_SIZE KB(4)
>> -
>> -#define ROUND_UP_TO(x, y) (((x) + (y) - 1) / (y) * (y))
>> -#define ROUND_DOWN_TO(x, y) ((x) / (y) * (y))
>> -#define ROUND_UP_TO_PAGE(x) ROUND_UP_TO((x), GTT_PAGE_SIZE)
>> -#define ROUND_DOWN_TO_PAGE(x) ROUND_DOWN_TO((x), GTT_PAGE_SIZE)
>> -
>> -/* messages */
>> -#define PFX INTELFB_MODULE_NAME ": "
>> -
>> -#define ERR_MSG(fmt, args...) printk(KERN_ERR PFX fmt, ## args)
>> -#define WRN_MSG(fmt, args...) printk(KERN_WARNING PFX fmt, ## args)
>> -#define NOT_MSG(fmt, args...) printk(KERN_NOTICE PFX fmt, ## args)
>> -#define INF_MSG(fmt, args...) printk(KERN_INFO PFX fmt, ## args)
>> -#if DEBUG
>> -#define DBG_MSG(fmt, args...) printk(KERN_DEBUG PFX fmt, ## args)
>> -#else
>> -#define DBG_MSG(fmt, args...) while (0) printk(fmt, ## args)
>> -#endif
>> -
>> -/* get commonly used pointers */
>> -#define GET_DINFO(info) (info)->par
>> -
>> -/* misc macros */
>> -#define ACCEL(d, i) \
>> - ((d)->accel && !(d)->ring_lockup && \
>> - ((i)->var.accel_flags & FB_ACCELF_TEXT))
>> -
>> -/*#define NOACCEL_CHIPSET(d) \
>> - ((d)->chipset != INTEL_865G)*/
>> -#define NOACCEL_CHIPSET(d) \
>> - (0)
>> -
>> -#define FIXED_MODE(d) ((d)->fixed_mode)
>> -
>> -/*** Driver parameters ***/
>> -
>> -#define RINGBUFFER_SIZE KB(64)
>> -#define HW_CURSOR_SIZE KB(4)
>> -
>> -/* Intel agpgart driver */
>> -#define AGP_PHYSICAL_MEMORY 2
>> -
>> -/* store information about an Ixxx DVO */
>> -/* The i830->i865 use multiple DVOs with multiple i2cs */
>> -/* the i915, i945 have a single sDVO i2c bus - which is different */
>> -#define MAX_OUTPUTS 6
>> -
>> -/* these are outputs from the chip - integrated only
>> - external chips are via DVO or SDVO output */
>> -#define INTELFB_OUTPUT_UNUSED 0
>> -#define INTELFB_OUTPUT_ANALOG 1
>> -#define INTELFB_OUTPUT_DVO 2
>> -#define INTELFB_OUTPUT_SDVO 3
>> -#define INTELFB_OUTPUT_LVDS 4
>> -#define INTELFB_OUTPUT_TVOUT 5
>> -
>> -#define INTELFB_DVO_CHIP_NONE 0
>> -#define INTELFB_DVO_CHIP_LVDS 1
>> -#define INTELFB_DVO_CHIP_TMDS 2
>> -#define INTELFB_DVO_CHIP_TVOUT 4
>> -
>> -#define INTELFB_OUTPUT_PIPE_NC 0
>> -#define INTELFB_OUTPUT_PIPE_A 1
>> -#define INTELFB_OUTPUT_PIPE_B 2
>> -
>> -/*** Data Types ***/
>> -
>> -/* supported chipsets */
>> -enum intel_chips {
>> - INTEL_830M,
>> - INTEL_845G,
>> - INTEL_85XGM,
>> - INTEL_852GM,
>> - INTEL_852GME,
>> - INTEL_854,
>> - INTEL_855GM,
>> - INTEL_855GME,
>> - INTEL_865G,
>> - INTEL_915G,
>> - INTEL_915GM,
>> - INTEL_945G,
>> - INTEL_945GM,
>> - INTEL_945GME,
>> - INTEL_965G,
>> - INTEL_965GM,
>> -};
>> -
>> -struct intelfb_hwstate {
>> - u32 vga0_divisor;
>> - u32 vga1_divisor;
>> - u32 vga_pd;
>> - u32 dpll_a;
>> - u32 dpll_b;
>> - u32 fpa0;
>> - u32 fpa1;
>> - u32 fpb0;
>> - u32 fpb1;
>> - u32 palette_a[PALETTE_8_ENTRIES];
>> - u32 palette_b[PALETTE_8_ENTRIES];
>> - u32 htotal_a;
>> - u32 hblank_a;
>> - u32 hsync_a;
>> - u32 vtotal_a;
>> - u32 vblank_a;
>> - u32 vsync_a;
>> - u32 src_size_a;
>> - u32 bclrpat_a;
>> - u32 htotal_b;
>> - u32 hblank_b;
>> - u32 hsync_b;
>> - u32 vtotal_b;
>> - u32 vblank_b;
>> - u32 vsync_b;
>> - u32 src_size_b;
>> - u32 bclrpat_b;
>> - u32 adpa;
>> - u32 dvoa;
>> - u32 dvob;
>> - u32 dvoc;
>> - u32 dvoa_srcdim;
>> - u32 dvob_srcdim;
>> - u32 dvoc_srcdim;
>> - u32 lvds;
>> - u32 pipe_a_conf;
>> - u32 pipe_b_conf;
>> - u32 disp_arb;
>> - u32 cursor_a_control;
>> - u32 cursor_b_control;
>> - u32 cursor_a_base;
>> - u32 cursor_b_base;
>> - u32 cursor_size;
>> - u32 disp_a_ctrl;
>> - u32 disp_b_ctrl;
>> - u32 disp_a_base;
>> - u32 disp_b_base;
>> - u32 cursor_a_palette[4];
>> - u32 cursor_b_palette[4];
>> - u32 disp_a_stride;
>> - u32 disp_b_stride;
>> - u32 vgacntrl;
>> - u32 add_id;
>> - u32 swf0x[7];
>> - u32 swf1x[7];
>> - u32 swf3x[3];
>> - u32 fence[8];
>> - u32 instpm;
>> - u32 mem_mode;
>> - u32 fw_blc_0;
>> - u32 fw_blc_1;
>> - u16 hwstam;
>> - u16 ier;
>> - u16 iir;
>> - u16 imr;
>> -};
>> -
>> -struct intelfb_heap_data {
>> - u32 physical;
>> - u8 __iomem *virtual;
>> - u32 offset; /* in GATT pages */
>> - u32 size; /* in bytes */
>> -};
>> -
>> -#ifdef CONFIG_FB_INTEL_I2C
>> -struct intelfb_i2c_chan {
>> - struct intelfb_info *dinfo;
>> - u32 reg;
>> - struct i2c_adapter adapter;
>> - struct i2c_algo_bit_data algo;
>> -};
>> -#endif
>> -
>> -struct intelfb_output_rec {
>> - int type;
>> - int pipe;
>> - int flags;
>> -
>> -#ifdef CONFIG_FB_INTEL_I2C
>> - struct intelfb_i2c_chan i2c_bus;
>> - struct intelfb_i2c_chan ddc_bus;
>> -#endif
>> -};
>> -
>> -struct intelfb_vsync {
>> - wait_queue_head_t wait;
>> - unsigned int count;
>> - int pan_display;
>> - u32 pan_offset;
>> -};
>> -
>> -struct intelfb_info {
>> - struct fb_info *info;
>> - const struct fb_ops *fbops;
>> - struct pci_dev *pdev;
>> -
>> - struct intelfb_hwstate save_state;
>> -
>> - /* agpgart structs */
>> - struct agp_memory *gtt_fb_mem; /* use all stolen memory or vram */
>> - struct agp_memory *gtt_ring_mem; /* ring buffer */
>> - struct agp_memory *gtt_cursor_mem; /* hw cursor */
>> -
>> - /* use a gart reserved fb mem */
>> - u8 fbmem_gart;
>> -
>> - int wc_cookie;
>> -
>> - /* heap data */
>> - struct intelfb_heap_data aperture;
>> - struct intelfb_heap_data fb;
>> - struct intelfb_heap_data ring;
>> - struct intelfb_heap_data cursor;
>> -
>> - /* mmio regs */
>> - u32 mmio_base_phys;
>> - u8 __iomem *mmio_base;
>> -
>> - /* fb start offset (in bytes) */
>> - u32 fb_start;
>> -
>> - /* ring buffer */
>> - u32 ring_head;
>> - u32 ring_tail;
>> - u32 ring_tail_mask;
>> - u32 ring_space;
>> - u32 ring_lockup;
>> -
>> - /* palette */
>> - u32 pseudo_palette[16];
>> -
>> - /* chip info */
>> - int pci_chipset;
>> - int chipset;
>> - const char *name;
>> - int mobile;
>> -
>> - /* current mode */
>> - int bpp, depth;
>> - u32 visual;
>> - int xres, yres, pitch;
>> - int pixclock;
>> -
>> - /* current pipe */
>> - int pipe;
>> -
>> - /* some flags */
>> - int accel;
>> - int hwcursor;
>> - int fixed_mode;
>> - int ring_active;
>> - int flag;
>> - unsigned long irq_flags;
>> - int open;
>> -
>> - /* vsync */
>> - struct intelfb_vsync vsync;
>> - spinlock_t int_lock;
>> -
>> - /* hw cursor */
>> - int cursor_on;
>> - int cursor_blanked;
>> - u8 cursor_src[64];
>> -
>> - /* initial parameters */
>> - int initial_vga;
>> - struct fb_var_screeninfo initial_var;
>> - u32 initial_fb_base;
>> - u32 initial_video_ram;
>> - u32 initial_pitch;
>> -
>> - /* driver registered */
>> - int registered;
>> -
>> - /* index into plls */
>> - int pll_index;
>> -
>> - /* outputs */
>> - int num_outputs;
>> - struct intelfb_output_rec output[MAX_OUTPUTS];
>> -};
>> -
>> -#define IS_I9XX(dinfo) (((dinfo)->chipset == INTEL_915G) || \
>> - ((dinfo)->chipset == INTEL_915GM) || \
>> - ((dinfo)->chipset == INTEL_945G) || \
>> - ((dinfo)->chipset == INTEL_945GM) || \
>> - ((dinfo)->chipset == INTEL_945GME) || \
>> - ((dinfo)->chipset == INTEL_965G) || \
>> - ((dinfo)->chipset == INTEL_965GM))
>> -
>> -/*** function prototypes ***/
>> -
>> -extern int intelfb_var_to_depth(const struct fb_var_screeninfo *var);
>> -
>> -#ifdef CONFIG_FB_INTEL_I2C
>> -extern void intelfb_create_i2c_busses(struct intelfb_info *dinfo);
>> -extern void intelfb_delete_i2c_busses(struct intelfb_info *dinfo);
>> -#endif
>> -
>> -#endif /* _INTELFB_H */
>> diff --git a/drivers/video/fbdev/intelfb/intelfb_i2c.c b/drivers/video/fbdev/intelfb/intelfb_i2c.c
>> deleted file mode 100644
>> index 3300bd31d9d7..000000000000
>> --- a/drivers/video/fbdev/intelfb/intelfb_i2c.c
>> +++ /dev/null
>> @@ -1,209 +0,0 @@
>> -/**************************************************************************
>> -
>> - Copyright 2006 Dave Airlie <airlied at linux.ie>
>> -
>> -All Rights Reserved.
>> -
>> -Permission is hereby granted, free of charge, to any person obtaining a
>> -copy of this software and associated documentation files (the "Software"),
>> -to deal in the Software without restriction, including without limitation
>> -on the rights to use, copy, modify, merge, publish, distribute, sub
>> -license, and/or sell copies of the Software, and to permit persons to whom
>> -the Software is furnished to do so, subject to the following conditions:
>> -
>> -The above copyright notice and this permission notice (including the next
>> -paragraph) shall be included in all copies or substantial portions of the
>> -Software.
>> -
>> -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>> -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> -FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
>> -THE COPYRIGHT HOLDERS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM,
>> -DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
>> -OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
>> -USE OR OTHER DEALINGS IN THE SOFTWARE.
>> -
>> -**************************************************************************/
>> -
>> -#include <linux/module.h>
>> -#include <linux/kernel.h>
>> -#include <linux/delay.h>
>> -#include <linux/pci.h>
>> -#include <linux/fb.h>
>> -
>> -#include <linux/i2c.h>
>> -#include <linux/i2c-algo-bit.h>
>> -
>> -#include <asm/io.h>
>> -
>> -#include "intelfb.h"
>> -#include "intelfbhw.h"
>> -
>> -/* bit locations in the registers */
>> -#define SCL_DIR_MASK 0x0001
>> -#define SCL_DIR 0x0002
>> -#define SCL_VAL_MASK 0x0004
>> -#define SCL_VAL_OUT 0x0008
>> -#define SCL_VAL_IN 0x0010
>> -#define SDA_DIR_MASK 0x0100
>> -#define SDA_DIR 0x0200
>> -#define SDA_VAL_MASK 0x0400
>> -#define SDA_VAL_OUT 0x0800
>> -#define SDA_VAL_IN 0x1000
>> -
>> -static void intelfb_gpio_setscl(void *data, int state)
>> -{
>> - struct intelfb_i2c_chan *chan = data;
>> - struct intelfb_info *dinfo = chan->dinfo;
>> - u32 val;
>> -
>> - OUTREG(chan->reg, (state ? SCL_VAL_OUT : 0) |
>> - SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK);
>> - val = INREG(chan->reg);
>> -}
>> -
>> -static void intelfb_gpio_setsda(void *data, int state)
>> -{
>> - struct intelfb_i2c_chan *chan = data;
>> - struct intelfb_info *dinfo = chan->dinfo;
>> - u32 val;
>> -
>> - OUTREG(chan->reg, (state ? SDA_VAL_OUT : 0) |
>> - SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK);
>> - val = INREG(chan->reg);
>> -}
>> -
>> -static int intelfb_gpio_getscl(void *data)
>> -{
>> - struct intelfb_i2c_chan *chan = data;
>> - struct intelfb_info *dinfo = chan->dinfo;
>> - u32 val;
>> -
>> - OUTREG(chan->reg, SCL_DIR_MASK);
>> - OUTREG(chan->reg, 0);
>> - val = INREG(chan->reg);
>> - return ((val & SCL_VAL_IN) != 0);
>> -}
>> -
>> -static int intelfb_gpio_getsda(void *data)
>> -{
>> - struct intelfb_i2c_chan *chan = data;
>> - struct intelfb_info *dinfo = chan->dinfo;
>> - u32 val;
>> -
>> - OUTREG(chan->reg, SDA_DIR_MASK);
>> - OUTREG(chan->reg, 0);
>> - val = INREG(chan->reg);
>> - return ((val & SDA_VAL_IN) != 0);
>> -}
>> -
>> -static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo,
>> - struct intelfb_i2c_chan *chan,
>> - const u32 reg, const char *name,
>> - int class)
>> -{
>> - int rc;
>> -
>> - chan->dinfo = dinfo;
>> - chan->reg = reg;
>> - snprintf(chan->adapter.name, sizeof(chan->adapter.name),
>> - "intelfb %s", name);
>> - chan->adapter.class = class;
>> - chan->adapter.owner = THIS_MODULE;
>> - chan->adapter.algo_data = &chan->algo;
>> - chan->adapter.dev.parent = &chan->dinfo->pdev->dev;
>> - chan->algo.setsda = intelfb_gpio_setsda;
>> - chan->algo.setscl = intelfb_gpio_setscl;
>> - chan->algo.getsda = intelfb_gpio_getsda;
>> - chan->algo.getscl = intelfb_gpio_getscl;
>> - chan->algo.udelay = 40;
>> - chan->algo.timeout = 20;
>> - chan->algo.data = chan;
>> -
>> - i2c_set_adapdata(&chan->adapter, chan);
>> -
>> - /* Raise SCL and SDA */
>> - intelfb_gpio_setsda(chan, 1);
>> - intelfb_gpio_setscl(chan, 1);
>> - udelay(20);
>> -
>> - rc = i2c_bit_add_bus(&chan->adapter);
>> - if (rc == 0)
>> - DBG_MSG("I2C bus %s registered.\n", name);
>> - else
>> - WRN_MSG("Failed to register I2C bus %s.\n", name);
>> - return rc;
>> -}
>> -
>> -void intelfb_create_i2c_busses(struct intelfb_info *dinfo)
>> -{
>> - int i = 0;
>> -
>> - /* everyone has at least a single analog output */
>> - dinfo->num_outputs = 1;
>> - dinfo->output[i].type = INTELFB_OUTPUT_ANALOG;
>> -
>> - /* setup the DDC bus for analog output */
>> - intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, GPIOA,
>> - "CRTDDC_A", I2C_CLASS_DDC);
>> - i++;
>> -
>> - /* need to add the output busses for each device
>> - - this function is very incomplete
>> - - i915GM has LVDS and TVOUT for example
>> - */
>> - switch(dinfo->chipset) {
>> - case INTEL_830M:
>> - case INTEL_845G:
>> - case INTEL_854:
>> - case INTEL_855GM:
>> - case INTEL_865G:
>> - dinfo->output[i].type = INTELFB_OUTPUT_DVO;
>> - intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus,
>> - GPIOD, "DVODDC_D", I2C_CLASS_DDC);
>> - intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus,
>> - GPIOE, "DVOI2C_E", 0);
>> - i++;
>> - break;
>> - case INTEL_915G:
>> - case INTEL_915GM:
>> - /* has some LVDS + tv-out */
>> - case INTEL_945G:
>> - case INTEL_945GM:
>> - case INTEL_945GME:
>> - case INTEL_965G:
>> - case INTEL_965GM:
>> - /* SDVO ports have a single control bus - 2 devices */
>> - dinfo->output[i].type = INTELFB_OUTPUT_SDVO;
>> - intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus,
>> - GPIOE, "SDVOCTRL_E", 0);
>> - /* TODO: initialize the SDVO */
>> - /* I830SDVOInit(pScrn, i, DVOB); */
>> - i++;
>> -
>> - /* set up SDVOC */
>> - dinfo->output[i].type = INTELFB_OUTPUT_SDVO;
>> - dinfo->output[i].i2c_bus = dinfo->output[i - 1].i2c_bus;
>> - /* TODO: initialize the SDVO */
>> - /* I830SDVOInit(pScrn, i, DVOC); */
>> - i++;
>> - break;
>> - }
>> - dinfo->num_outputs = i;
>> -}
>> -
>> -void intelfb_delete_i2c_busses(struct intelfb_info *dinfo)
>> -{
>> - int i;
>> -
>> - for (i = 0; i < MAX_OUTPUTS; i++) {
>> - if (dinfo->output[i].i2c_bus.dinfo) {
>> - i2c_del_adapter(&dinfo->output[i].i2c_bus.adapter);
>> - dinfo->output[i].i2c_bus.dinfo = NULL;
>> - }
>> - if (dinfo->output[i].ddc_bus.dinfo) {
>> - i2c_del_adapter(&dinfo->output[i].ddc_bus.adapter);
>> - dinfo->output[i].ddc_bus.dinfo = NULL;
>> - }
>> - }
>> -}
>> diff --git a/drivers/video/fbdev/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c
>> deleted file mode 100644
>> index d29d80a16295..000000000000
>> --- a/drivers/video/fbdev/intelfb/intelfbdrv.c
>> +++ /dev/null
>> @@ -1,1680 +0,0 @@
>> -/*
>> - * intelfb
>> - *
>> - * Linux framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/
>> - * 945G/945GM/945GME/965G/965GM integrated graphics chips.
>> - *
>> - * Copyright © 2002, 2003 David Dawes <dawes at xfree86.org>
>> - * 2004 Sylvain Meyer
>> - * 2006 David Airlie
>> - *
>> - * This driver consists of two parts. The first part (intelfbdrv.c) provides
>> - * the basic fbdev interfaces, is derived in part from the radeonfb and
>> - * vesafb drivers, and is covered by the GPL. The second part (intelfbhw.c)
>> - * provides the code to program the hardware. Most of it is derived from
>> - * the i810/i830 XFree86 driver. The HW-specific code is covered here
>> - * under a dual license (GPL and MIT/XFree86 license).
>> - *
>> - * Author: David Dawes
>> - *
>> - */
>> -
>> -/* $DHD: intelfb/intelfbdrv.c,v 1.20 2003/06/27 15:17:40 dawes Exp $ */
>> -
>> -/*
>> - * Changes:
>> - * 01/2003 - Initial driver (0.1.0), no mode switching, no acceleration.
>> - * This initial version is a basic core that works a lot like
>> - * the vesafb driver. It must be built-in to the kernel,
>> - * and the initial video mode must be set with vga=XXX at
>> - * boot time. (David Dawes)
>> - *
>> - * 01/2003 - Version 0.2.0: Mode switching added, colormap support
>> - * implemented, Y panning, and soft screen blanking implemented.
>> - * No acceleration yet. (David Dawes)
>> - *
>> - * 01/2003 - Version 0.3.0: fbcon acceleration support added. Module
>> - * option handling added. (David Dawes)
>> - *
>> - * 01/2003 - Version 0.4.0: fbcon HW cursor support added. (David Dawes)
>> - *
>> - * 01/2003 - Version 0.4.1: Add auto-generation of built-in modes.
>> - * (David Dawes)
>> - *
>> - * 02/2003 - Version 0.4.2: Add check for active non-CRT devices, and
>> - * mode validation checks. (David Dawes)
>> - *
>> - * 02/2003 - Version 0.4.3: Check when the VC is in graphics mode so that
>> - * acceleration is disabled while an XFree86 server is running.
>> - * (David Dawes)
>> - *
>> - * 02/2003 - Version 0.4.4: Monitor DPMS support. (David Dawes)
>> - *
>> - * 02/2003 - Version 0.4.5: Basic XFree86 + fbdev working. (David Dawes)
>> - *
>> - * 02/2003 - Version 0.5.0: Modify to work with the 2.5.32 kernel as well
>> - * as 2.4.x kernels. (David Dawes)
>> - *
>> - * 02/2003 - Version 0.6.0: Split out HW-specifics into a separate file.
>> - * (David Dawes)
>> - *
>> - * 02/2003 - Version 0.7.0: Test on 852GM/855GM. Acceleration and HW
>> - * cursor are disabled on this platform. (David Dawes)
>> - *
>> - * 02/2003 - Version 0.7.1: Test on 845G. Acceleration is disabled
>> - * on this platform. (David Dawes)
>> - *
>> - * 02/2003 - Version 0.7.2: Test on 830M. Acceleration and HW
>> - * cursor are disabled on this platform. (David Dawes)
>> - *
>> - * 02/2003 - Version 0.7.3: Fix 8-bit modes for mobile platforms
>> - * (David Dawes)
>> - *
>> - * 02/2003 - Version 0.7.4: Add checks for FB and FBCON_HAS_CFB* configured
>> - * in the kernel, and add mode bpp verification and default
>> - * bpp selection based on which FBCON_HAS_CFB* are configured.
>> - * (David Dawes)
>> - *
>> - * 02/2003 - Version 0.7.5: Add basic package/install scripts based on the
>> - * DRI packaging scripts. (David Dawes)
>> - *
>> - * 04/2003 - Version 0.7.6: Fix typo that affects builds with SMP-enabled
>> - * kernels. (David Dawes, reported by Anupam).
>> - *
>> - * 06/2003 - Version 0.7.7:
>> - * Fix Makefile.kernel build problem (Tsutomu Yasuda).
>> - * Fix mis-placed #endif (2.4.21 kernel).
>> - *
>> - * 09/2004 - Version 0.9.0 - by Sylvain Meyer
>> - * Port to linux 2.6 kernel fbdev
>> - * Fix HW accel and HW cursor on i845G
>> - * Use of agpgart for fb memory reservation
>> - * Add mtrr support
>> - *
>> - * 10/2004 - Version 0.9.1
>> - * Use module_param instead of old MODULE_PARM
>> - * Some cleanup
>> - *
>> - * 11/2004 - Version 0.9.2
>> - * Add vram option to reserve more memory than stolen by BIOS
>> - * Fix intelfbhw_pan_display typo
>> - * Add __initdata annotations
>> - *
>> - * 04/2008 - Version 0.9.5
>> - * Add support for 965G/965GM. (Maik Broemme <mbroemme at plusserver.de>)
>> - *
>> - * 08/2008 - Version 0.9.6
>> - * Add support for 945GME. (Phil Endecott <spam_from_intelfb at chezphil.org>)
>> - */
>> -
>> -#include <linux/aperture.h>
>> -#include <linux/module.h>
>> -#include <linux/kernel.h>
>> -#include <linux/errno.h>
>> -#include <linux/string.h>
>> -#include <linux/mm.h>
>> -#include <linux/slab.h>
>> -#include <linux/delay.h>
>> -#include <linux/fb.h>
>> -#include <linux/ioport.h>
>> -#include <linux/init.h>
>> -#include <linux/pci.h>
>> -#include <linux/vmalloc.h>
>> -#include <linux/pagemap.h>
>> -#include <linux/screen_info.h>
>> -
>> -#include <asm/io.h>
>> -
>> -#include "intelfb.h"
>> -#include "intelfbhw.h"
>> -#include "../edid.h"
>> -
>> -static void get_initial_mode(struct intelfb_info *dinfo);
>> -static void update_dinfo(struct intelfb_info *dinfo,
>> - struct fb_var_screeninfo *var);
>> -static int intelfb_open(struct fb_info *info, int user);
>> -static int intelfb_release(struct fb_info *info, int user);
>> -static int intelfb_check_var(struct fb_var_screeninfo *var,
>> - struct fb_info *info);
>> -static int intelfb_set_par(struct fb_info *info);
>> -static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
>> - unsigned blue, unsigned transp,
>> - struct fb_info *info);
>> -
>> -static int intelfb_blank(int blank, struct fb_info *info);
>> -static int intelfb_pan_display(struct fb_var_screeninfo *var,
>> - struct fb_info *info);
>> -
>> -static void intelfb_fillrect(struct fb_info *info,
>> - const struct fb_fillrect *rect);
>> -static void intelfb_copyarea(struct fb_info *info,
>> - const struct fb_copyarea *region);
>> -static void intelfb_imageblit(struct fb_info *info,
>> - const struct fb_image *image);
>> -static int intelfb_cursor(struct fb_info *info,
>> - struct fb_cursor *cursor);
>> -
>> -static int intelfb_sync(struct fb_info *info);
>> -
>> -static int intelfb_ioctl(struct fb_info *info,
>> - unsigned int cmd, unsigned long arg);
>> -
>> -static int intelfb_pci_register(struct pci_dev *pdev,
>> - const struct pci_device_id *ent);
>> -static void intelfb_pci_unregister(struct pci_dev *pdev);
>> -static int intelfb_set_fbinfo(struct intelfb_info *dinfo);
>> -
>> -/*
>> - * Limiting the class to PCI_CLASS_DISPLAY_VGA prevents function 1 of the
>> - * mobile chipsets from being registered.
>> - */
>> -#if DETECT_VGA_CLASS_ONLY
>> -#define INTELFB_CLASS_MASK ~0 << 8
>> -#else
>> -#define INTELFB_CLASS_MASK 0
>> -#endif
>> -
>> -static const struct pci_device_id intelfb_pci_table[] = {
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_830M, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_830M },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_854, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_854 },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GM },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GME, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GME },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965G },
>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965GM },
>> - { 0, }
>> -};
>> -
>> -/* Global data */
>> -static int num_registered = 0;
>> -
>> -/* fb ops */
>> -static const struct fb_ops intel_fb_ops = {
>> - .owner = THIS_MODULE,
>> - .fb_open = intelfb_open,
>> - .fb_release = intelfb_release,
>> - __FB_DEFAULT_IOMEM_OPS_RDWR,
>> - .fb_check_var = intelfb_check_var,
>> - .fb_set_par = intelfb_set_par,
>> - .fb_setcolreg = intelfb_setcolreg,
>> - .fb_blank = intelfb_blank,
>> - .fb_pan_display = intelfb_pan_display,
>> - .fb_fillrect = intelfb_fillrect,
>> - .fb_copyarea = intelfb_copyarea,
>> - .fb_imageblit = intelfb_imageblit,
>> - .fb_cursor = intelfb_cursor,
>> - .fb_sync = intelfb_sync,
>> - .fb_ioctl = intelfb_ioctl,
>> - __FB_DEFAULT_IOMEM_OPS_MMAP,
>> -};
>> -
>> -/* PCI driver module table */
>> -static struct pci_driver intelfb_driver = {
>> - .name = "intelfb",
>> - .id_table = intelfb_pci_table,
>> - .probe = intelfb_pci_register,
>> - .remove = intelfb_pci_unregister,
>> -};
>> -
>> -/* Module description/parameters */
>> -MODULE_AUTHOR("David Dawes <dawes at tungstengraphics.com>, "
>> - "Sylvain Meyer <sylvain.meyer at worldonline.fr>");
>> -MODULE_DESCRIPTION("Framebuffer driver for Intel(R) " SUPPORTED_CHIPSETS
>> - " chipsets");
>> -MODULE_LICENSE("Dual BSD/GPL");
>> -MODULE_DEVICE_TABLE(pci, intelfb_pci_table);
>> -
>> -static bool accel = 1;
>> -static int vram = 4;
>> -static bool hwcursor = 0;
>> -static bool mtrr = 1;
>> -static bool fixed = 0;
>> -static bool noinit = 0;
>> -static bool noregister = 0;
>> -static bool probeonly = 0;
>> -static bool idonly = 0;
>> -static int bailearly = 0;
>> -static int voffset = 48;
>> -static char *mode = NULL;
>> -
>> -module_param(accel, bool, S_IRUGO);
>> -MODULE_PARM_DESC(accel, "Enable hardware acceleration");
>> -module_param(vram, int, S_IRUGO);
>> -MODULE_PARM_DESC(vram, "System RAM to allocate to framebuffer in MiB");
>> -module_param(voffset, int, S_IRUGO);
>> -MODULE_PARM_DESC(voffset, "Offset of framebuffer in MiB");
>> -module_param(hwcursor, bool, S_IRUGO);
>> -MODULE_PARM_DESC(hwcursor, "Enable HW cursor");
>> -module_param(mtrr, bool, S_IRUGO);
>> -MODULE_PARM_DESC(mtrr, "Enable MTRR support");
>> -module_param(fixed, bool, S_IRUGO);
>> -MODULE_PARM_DESC(fixed, "Disable mode switching");
>> -module_param(noinit, bool, 0);
>> -MODULE_PARM_DESC(noinit, "Don't initialise graphics mode when loading");
>> -module_param(noregister, bool, 0);
>> -MODULE_PARM_DESC(noregister, "Don't register, just probe and exit (debug)");
>> -module_param(probeonly, bool, 0);
>> -MODULE_PARM_DESC(probeonly, "Do a minimal probe (debug)");
>> -module_param(idonly, bool, 0);
>> -MODULE_PARM_DESC(idonly, "Just identify without doing anything else (debug)");
>> -module_param(bailearly, int, 0);
>> -MODULE_PARM_DESC(bailearly, "Bail out early, depending on value (debug)");
>> -module_param(mode, charp, S_IRUGO);
>> -MODULE_PARM_DESC(mode,
>> - "Initial video mode \"<xres>x<yres>[-<depth>][@<refresh>]\"");
>> -
>> -#ifndef MODULE
>> -#define OPT_EQUAL(opt, name) (!strncmp(opt, name, strlen(name)))
>> -#define OPT_INTVAL(opt, name) simple_strtoul(opt + strlen(name) + 1, NULL, 0)
>> -#define OPT_STRVAL(opt, name) (opt + strlen(name))
>> -
>> -static __inline__ char * get_opt_string(const char *this_opt, const char *name)
>> -{
>> - const char *p;
>> - int i;
>> - char *ret;
>> -
>> - p = OPT_STRVAL(this_opt, name);
>> - i = 0;
>> - while (p[i] && p[i] != ' ' && p[i] != ',')
>> - i++;
>> - ret = kmalloc(i + 1, GFP_KERNEL);
>> - if (ret) {
>> - strncpy(ret, p, i);
>> - ret[i] = '\0';
>> - }
>> - return ret;
>> -}
>> -
>> -static __inline__ int get_opt_int(const char *this_opt, const char *name,
>> - int *ret)
>> -{
>> - if (!ret)
>> - return 0;
>> -
>> - if (!OPT_EQUAL(this_opt, name))
>> - return 0;
>> -
>> - *ret = OPT_INTVAL(this_opt, name);
>> - return 1;
>> -}
>> -
>> -static __inline__ int get_opt_bool(const char *this_opt, const char *name,
>> - bool *ret)
>> -{
>> - if (!ret)
>> - return 0;
>> -
>> - if (OPT_EQUAL(this_opt, name)) {
>> - if (this_opt[strlen(name)] == '=')
>> - *ret = simple_strtoul(this_opt + strlen(name) + 1,
>> - NULL, 0);
>> - else
>> - *ret = 1;
>> - } else {
>> - if (OPT_EQUAL(this_opt, "no") && OPT_EQUAL(this_opt + 2, name))
>> - *ret = 0;
>> - else
>> - return 0;
>> - }
>> - return 1;
>> -}
>> -
>> -static int __init intelfb_setup(char *options)
>> -{
>> - char *this_opt;
>> -
>> - DBG_MSG("intelfb_setup\n");
>> -
>> - if (!options || !*options) {
>> - DBG_MSG("no options\n");
>> - return 0;
>> - } else
>> - DBG_MSG("options: %s\n", options);
>> -
>> - /*
>> - * These are the built-in options analogous to the module parameters
>> - * defined above.
>> - *
>> - * The syntax is:
>> - *
>> - * video=intelfb:[mode][,<param>=<val>] ...
>> - *
>> - * e.g.,
>> - *
>> - * video=intelfb:1024x768-16 at 75,accel=0
>> - */
>> -
>> - while ((this_opt = strsep(&options, ","))) {
>> - if (!*this_opt)
>> - continue;
>> - if (get_opt_bool(this_opt, "accel", &accel))
>> - ;
>> - else if (get_opt_int(this_opt, "vram", &vram))
>> - ;
>> - else if (get_opt_bool(this_opt, "hwcursor", &hwcursor))
>> - ;
>> - else if (get_opt_bool(this_opt, "mtrr", &mtrr))
>> - ;
>> - else if (get_opt_bool(this_opt, "fixed", &fixed))
>> - ;
>> - else if (get_opt_bool(this_opt, "init", &noinit))
>> - noinit = !noinit;
>> - else if (OPT_EQUAL(this_opt, "mode="))
>> - mode = get_opt_string(this_opt, "mode=");
>> - else
>> - mode = this_opt;
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -#endif
>> -
>> -static int __init intelfb_init(void)
>> -{
>> -#ifndef MODULE
>> - char *option = NULL;
>> -#endif
>> -
>> - DBG_MSG("intelfb_init\n");
>> -
>> - INF_MSG("Framebuffer driver for "
>> - "Intel(R) " SUPPORTED_CHIPSETS " chipsets\n");
>> - INF_MSG("Version " INTELFB_VERSION "\n");
>> -
>> - if (idonly)
>> - return -ENODEV;
>> -
>> - if (fb_modesetting_disabled("intelfb"))
>> - return -ENODEV;
>> -
>> -#ifndef MODULE
>> - if (fb_get_options("intelfb", &option))
>> - return -ENODEV;
>> - intelfb_setup(option);
>> -#endif
>> -
>> - return pci_register_driver(&intelfb_driver);
>> -}
>> -
>> -static void __exit intelfb_exit(void)
>> -{
>> - DBG_MSG("intelfb_exit\n");
>> - pci_unregister_driver(&intelfb_driver);
>> -}
>> -
>> -module_init(intelfb_init);
>> -module_exit(intelfb_exit);
>> -
>> -/***************************************************************
>> - * driver init / cleanup *
>> - ***************************************************************/
>> -
>> -static void cleanup(struct intelfb_info *dinfo)
>> -{
>> - DBG_MSG("cleanup\n");
>> -
>> - if (!dinfo)
>> - return;
>> -
>> - intelfbhw_disable_irq(dinfo);
>> -
>> - fb_dealloc_cmap(&dinfo->info->cmap);
>> - kfree(dinfo->info->pixmap.addr);
>> -
>> - if (dinfo->registered)
>> - unregister_framebuffer(dinfo->info);
>> -
>> - arch_phys_wc_del(dinfo->wc_cookie);
>> -
>> - if (dinfo->fbmem_gart && dinfo->gtt_fb_mem) {
>> - agp_unbind_memory(dinfo->gtt_fb_mem);
>> - agp_free_memory(dinfo->gtt_fb_mem);
>> - }
>> - if (dinfo->gtt_cursor_mem) {
>> - agp_unbind_memory(dinfo->gtt_cursor_mem);
>> - agp_free_memory(dinfo->gtt_cursor_mem);
>> - }
>> - if (dinfo->gtt_ring_mem) {
>> - agp_unbind_memory(dinfo->gtt_ring_mem);
>> - agp_free_memory(dinfo->gtt_ring_mem);
>> - }
>> -
>> -#ifdef CONFIG_FB_INTEL_I2C
>> - /* un-register I2C bus */
>> - intelfb_delete_i2c_busses(dinfo);
>> -#endif
>> -
>> - if (dinfo->mmio_base)
>> - iounmap((void __iomem *)dinfo->mmio_base);
>> - if (dinfo->aperture.virtual)
>> - iounmap((void __iomem *)dinfo->aperture.virtual);
>> -
>> - if (dinfo->flag & INTELFB_MMIO_ACQUIRED)
>> - release_mem_region(dinfo->mmio_base_phys, INTEL_REG_SIZE);
>> - if (dinfo->flag & INTELFB_FB_ACQUIRED)
>> - release_mem_region(dinfo->aperture.physical,
>> - dinfo->aperture.size);
>> - framebuffer_release(dinfo->info);
>> -}
>> -
>> -#define bailout(dinfo) do { \
>> - DBG_MSG("bailout\n"); \
>> - cleanup(dinfo); \
>> - INF_MSG("Not going to register framebuffer, exiting...\n"); \
>> - return -ENODEV; \
>> -} while (0)
>> -
>> -
>> -static int intelfb_pci_register(struct pci_dev *pdev,
>> - const struct pci_device_id *ent)
>> -{
>> - struct fb_info *info;
>> - struct intelfb_info *dinfo;
>> - int i, err, dvo;
>> - int aperture_size, stolen_size = 0;
>> - struct agp_kern_info gtt_info;
>> - int agp_memtype;
>> - const char *s;
>> - struct agp_bridge_data *bridge;
>> - int aperture_bar = 0;
>> - int mmio_bar = 1;
>> - int offset;
>> -
>> - DBG_MSG("intelfb_pci_register\n");
>> -
>> - err = aperture_remove_conflicting_pci_devices(pdev, "intelfb");
>> - if (err)
>> - return err;
>> -
>> - num_registered++;
>> - if (num_registered != 1) {
>> - ERR_MSG("Attempted to register %d devices "
>> - "(should be only 1).\n", num_registered);
>> - return -ENODEV;
>> - }
>> -
>> - info = framebuffer_alloc(sizeof(struct intelfb_info), &pdev->dev);
>> - if (!info)
>> - return -ENOMEM;
>> -
>> - if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) {
>> - ERR_MSG("Could not allocate cmap for intelfb_info.\n");
>> - goto err_out_cmap;
>> - }
>> -
>> - dinfo = info->par;
>> - dinfo->info = info;
>> - dinfo->fbops = &intel_fb_ops;
>> - dinfo->pdev = pdev;
>> -
>> - /* Reserve pixmap space. */
>> - info->pixmap.addr = kzalloc(64 * 1024, GFP_KERNEL);
>> - if (info->pixmap.addr == NULL) {
>> - ERR_MSG("Cannot reserve pixmap memory.\n");
>> - goto err_out_pixmap;
>> - }
>> -
>> - /* set early this option because it could be changed by tv encoder
>> - driver */
>> - dinfo->fixed_mode = fixed;
>> -
>> - /* Enable device. */
>> - if ((err = pci_enable_device(pdev))) {
>> - ERR_MSG("Cannot enable device.\n");
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - /* Set base addresses. */
>> - if ((ent->device == PCI_DEVICE_ID_INTEL_915G) ||
>> - (ent->device == PCI_DEVICE_ID_INTEL_915GM) ||
>> - (ent->device == PCI_DEVICE_ID_INTEL_945G) ||
>> - (ent->device == PCI_DEVICE_ID_INTEL_945GM) ||
>> - (ent->device == PCI_DEVICE_ID_INTEL_945GME) ||
>> - (ent->device == PCI_DEVICE_ID_INTEL_965G) ||
>> - (ent->device == PCI_DEVICE_ID_INTEL_965GM)) {
>> -
>> - aperture_bar = 2;
>> - mmio_bar = 0;
>> - }
>> - dinfo->aperture.physical = pci_resource_start(pdev, aperture_bar);
>> - dinfo->aperture.size = pci_resource_len(pdev, aperture_bar);
>> - dinfo->mmio_base_phys = pci_resource_start(pdev, mmio_bar);
>> - DBG_MSG("fb aperture: 0x%llx/0x%llx, MMIO region: 0x%llx/0x%llx\n",
>> - (unsigned long long)pci_resource_start(pdev, aperture_bar),
>> - (unsigned long long)pci_resource_len(pdev, aperture_bar),
>> - (unsigned long long)pci_resource_start(pdev, mmio_bar),
>> - (unsigned long long)pci_resource_len(pdev, mmio_bar));
>> -
>> - /* Reserve the fb and MMIO regions */
>> - if (!request_mem_region(dinfo->aperture.physical, dinfo->aperture.size,
>> - INTELFB_MODULE_NAME)) {
>> - ERR_MSG("Cannot reserve FB region.\n");
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - dinfo->flag |= INTELFB_FB_ACQUIRED;
>> -
>> - if (!request_mem_region(dinfo->mmio_base_phys,
>> - INTEL_REG_SIZE,
>> - INTELFB_MODULE_NAME)) {
>> - ERR_MSG("Cannot reserve MMIO region.\n");
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - dinfo->flag |= INTELFB_MMIO_ACQUIRED;
>> -
>> - /* Get the chipset info. */
>> - dinfo->pci_chipset = pdev->device;
>> -
>> - if (intelfbhw_get_chipset(pdev, dinfo)) {
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - if (intelfbhw_get_memory(pdev, &aperture_size, &stolen_size)) {
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - INF_MSG("%02x:%02x.%d: %s, aperture size %dMB, "
>> - "stolen memory %dkB\n",
>> - pdev->bus->number, PCI_SLOT(pdev->devfn),
>> - PCI_FUNC(pdev->devfn), dinfo->name,
>> - BtoMB(aperture_size), BtoKB(stolen_size));
>> -
>> - /* Set these from the options. */
>> - dinfo->accel = accel;
>> - dinfo->hwcursor = hwcursor;
>> -
>> - if (NOACCEL_CHIPSET(dinfo) && dinfo->accel == 1) {
>> - INF_MSG("Acceleration is not supported for the %s chipset.\n",
>> - dinfo->name);
>> - dinfo->accel = 0;
>> - }
>> -
>> - /* Framebuffer parameters - Use all the stolen memory if >= vram */
>> - if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) {
>> - dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size);
>> - dinfo->fbmem_gart = 0;
>> - } else {
>> - dinfo->fb.size = MB(vram);
>> - dinfo->fbmem_gart = 1;
>> - }
>> -
>> - /* Allocate space for the ring buffer and HW cursor if enabled. */
>> - if (dinfo->accel) {
>> - dinfo->ring.size = RINGBUFFER_SIZE;
>> - dinfo->ring_tail_mask = dinfo->ring.size - 1;
>> - }
>> - if (dinfo->hwcursor)
>> - dinfo->cursor.size = HW_CURSOR_SIZE;
>> -
>> - /* Use agpgart to manage the GATT */
>> - if (!(bridge = agp_backend_acquire(pdev))) {
>> - ERR_MSG("cannot acquire agp\n");
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - /* get the current gatt info */
>> - if (agp_copy_info(bridge, >t_info)) {
>> - ERR_MSG("cannot get agp info\n");
>> - agp_backend_release(bridge);
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - if (MB(voffset) < stolen_size)
>> - offset = (stolen_size >> 12);
>> - else
>> - offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
>> -
>> - /* set the mem offsets - set them after the already used pages */
>> - if (dinfo->accel)
>> - dinfo->ring.offset = offset + gtt_info.current_memory;
>> - if (dinfo->hwcursor)
>> - dinfo->cursor.offset = offset +
>> - + gtt_info.current_memory + (dinfo->ring.size >> 12);
>> - if (dinfo->fbmem_gart)
>> - dinfo->fb.offset = offset +
>> - + gtt_info.current_memory + (dinfo->ring.size >> 12)
>> - + (dinfo->cursor.size >> 12);
>> -
>> - /* Allocate memories (which aren't stolen) */
>> - /* Map the fb and MMIO regions */
>> - /* ioremap only up to the end of used aperture */
>> - dinfo->aperture.virtual = (u8 __iomem *)ioremap_wc
>> - (dinfo->aperture.physical, ((offset + dinfo->fb.offset) << 12)
>> - + dinfo->fb.size);
>> - if (!dinfo->aperture.virtual) {
>> - ERR_MSG("Cannot remap FB region.\n");
>> - agp_backend_release(bridge);
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - dinfo->mmio_base =
>> - (u8 __iomem *)ioremap(dinfo->mmio_base_phys,
>> - INTEL_REG_SIZE);
>> - if (!dinfo->mmio_base) {
>> - ERR_MSG("Cannot remap MMIO region.\n");
>> - agp_backend_release(bridge);
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - if (dinfo->accel) {
>> - if (!(dinfo->gtt_ring_mem =
>> - agp_allocate_memory(bridge, dinfo->ring.size >> 12,
>> - AGP_NORMAL_MEMORY))) {
>> - ERR_MSG("cannot allocate ring buffer memory\n");
>> - agp_backend_release(bridge);
>> - cleanup(dinfo);
>> - return -ENOMEM;
>> - }
>> - if (agp_bind_memory(dinfo->gtt_ring_mem,
>> - dinfo->ring.offset)) {
>> - ERR_MSG("cannot bind ring buffer memory\n");
>> - agp_backend_release(bridge);
>> - cleanup(dinfo);
>> - return -EBUSY;
>> - }
>> - dinfo->ring.physical = dinfo->aperture.physical
>> - + (dinfo->ring.offset << 12);
>> - dinfo->ring.virtual = dinfo->aperture.virtual
>> - + (dinfo->ring.offset << 12);
>> - dinfo->ring_head = 0;
>> - }
>> - if (dinfo->hwcursor) {
>> - agp_memtype = dinfo->mobile ? AGP_PHYSICAL_MEMORY
>> - : AGP_NORMAL_MEMORY;
>> - if (!(dinfo->gtt_cursor_mem =
>> - agp_allocate_memory(bridge, dinfo->cursor.size >> 12,
>> - agp_memtype))) {
>> - ERR_MSG("cannot allocate cursor memory\n");
>> - agp_backend_release(bridge);
>> - cleanup(dinfo);
>> - return -ENOMEM;
>> - }
>> - if (agp_bind_memory(dinfo->gtt_cursor_mem,
>> - dinfo->cursor.offset)) {
>> - ERR_MSG("cannot bind cursor memory\n");
>> - agp_backend_release(bridge);
>> - cleanup(dinfo);
>> - return -EBUSY;
>> - }
>> - if (dinfo->mobile)
>> - dinfo->cursor.physical
>> - = dinfo->gtt_cursor_mem->physical;
>> - else
>> - dinfo->cursor.physical = dinfo->aperture.physical
>> - + (dinfo->cursor.offset << 12);
>> - dinfo->cursor.virtual = dinfo->aperture.virtual
>> - + (dinfo->cursor.offset << 12);
>> - }
>> - if (dinfo->fbmem_gart) {
>> - if (!(dinfo->gtt_fb_mem =
>> - agp_allocate_memory(bridge, dinfo->fb.size >> 12,
>> - AGP_NORMAL_MEMORY))) {
>> - WRN_MSG("cannot allocate framebuffer memory - use "
>> - "the stolen one\n");
>> - dinfo->fbmem_gart = 0;
>> - }
>> - if (agp_bind_memory(dinfo->gtt_fb_mem,
>> - dinfo->fb.offset)) {
>> - WRN_MSG("cannot bind framebuffer memory - use "
>> - "the stolen one\n");
>> - dinfo->fbmem_gart = 0;
>> - }
>> - }
>> -
>> - /* update framebuffer memory parameters */
>> - if (!dinfo->fbmem_gart)
>> - dinfo->fb.offset = 0; /* starts at offset 0 */
>> - dinfo->fb.physical = dinfo->aperture.physical
>> - + (dinfo->fb.offset << 12);
>> - dinfo->fb.virtual = dinfo->aperture.virtual + (dinfo->fb.offset << 12);
>> - dinfo->fb_start = dinfo->fb.offset << 12;
>> -
>> - /* release agpgart */
>> - agp_backend_release(bridge);
>> -
>> - if (mtrr)
>> - dinfo->wc_cookie = arch_phys_wc_add(dinfo->aperture.physical,
>> - dinfo->aperture.size);
>> -
>> - DBG_MSG("fb: 0x%x(+ 0x%x)/0x%x (0x%p)\n",
>> - dinfo->fb.physical, dinfo->fb.offset, dinfo->fb.size,
>> - dinfo->fb.virtual);
>> - DBG_MSG("MMIO: 0x%x/0x%x (0x%p)\n",
>> - dinfo->mmio_base_phys, INTEL_REG_SIZE,
>> - dinfo->mmio_base);
>> - DBG_MSG("ring buffer: 0x%x/0x%x (0x%p)\n",
>> - dinfo->ring.physical, dinfo->ring.size,
>> - dinfo->ring.virtual);
>> - DBG_MSG("HW cursor: 0x%x/0x%x (0x%p) (offset 0x%x) (phys 0x%x)\n",
>> - dinfo->cursor.physical, dinfo->cursor.size,
>> - dinfo->cursor.virtual, dinfo->cursor.offset,
>> - dinfo->cursor.physical);
>> -
>> - DBG_MSG("options: vram = %d, accel = %d, hwcursor = %d, fixed = %d, "
>> - "noinit = %d\n", vram, accel, hwcursor, fixed, noinit);
>> - DBG_MSG("options: mode = \"%s\"\n", mode ? mode : "");
>> -
>> - if (probeonly)
>> - bailout(dinfo);
>> -
>> - /*
>> - * Check if the LVDS port or any DVO ports are enabled. If so,
>> - * don't allow mode switching
>> - */
>> - dvo = intelfbhw_check_non_crt(dinfo);
>> - if (dvo) {
>> - dinfo->fixed_mode = 1;
>> - WRN_MSG("Non-CRT device is enabled ( ");
>> - i = 0;
>> - while (dvo) {
>> - if (dvo & 1) {
>> - s = intelfbhw_dvo_to_string(1 << i);
>> - if (s)
>> - printk("%s ", s);
>> - }
>> - dvo >>= 1;
>> - ++i;
>> - }
>> - printk("). Disabling mode switching.\n");
>> - }
>> -
>> - if (bailearly == 1)
>> - bailout(dinfo);
>> -
>> - if (FIXED_MODE(dinfo) &&
>> - screen_info.orig_video_isVGA != VIDEO_TYPE_VLFB) {
>> - ERR_MSG("Video mode must be programmed at boot time.\n");
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - if (bailearly == 2)
>> - bailout(dinfo);
>> -
>> - /* Initialise dinfo and related data. */
>> - /* If an initial mode was programmed at boot time, get its details. */
>> - if (screen_info.orig_video_isVGA == VIDEO_TYPE_VLFB)
>> - get_initial_mode(dinfo);
>> -
>> - if (bailearly == 3)
>> - bailout(dinfo);
>> -
>> - if (FIXED_MODE(dinfo)) /* remap fb address */
>> - update_dinfo(dinfo, &dinfo->initial_var);
>> -
>> - if (bailearly == 4)
>> - bailout(dinfo);
>> -
>> -
>> - if (intelfb_set_fbinfo(dinfo)) {
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - if (bailearly == 5)
>> - bailout(dinfo);
>> -
>> -#ifdef CONFIG_FB_INTEL_I2C
>> - /* register I2C bus */
>> - intelfb_create_i2c_busses(dinfo);
>> -#endif
>> -
>> - if (bailearly == 6)
>> - bailout(dinfo);
>> -
>> - pci_set_drvdata(pdev, dinfo);
>> -
>> - /* Save the initial register state. */
>> - i = intelfbhw_read_hw_state(dinfo, &dinfo->save_state,
>> - bailearly > 6 ? bailearly - 6 : 0);
>> - if (i != 0) {
>> - DBG_MSG("intelfbhw_read_hw_state returned %d\n", i);
>> - bailout(dinfo);
>> - }
>> -
>> - intelfbhw_print_hw_state(dinfo, &dinfo->save_state);
>> -
>> - if (bailearly == 18)
>> - bailout(dinfo);
>> -
>> - /* read active pipe */
>> - dinfo->pipe = intelfbhw_active_pipe(&dinfo->save_state);
>> -
>> - /* Cursor initialisation */
>> - if (dinfo->hwcursor) {
>> - intelfbhw_cursor_init(dinfo);
>> - intelfbhw_cursor_reset(dinfo);
>> - }
>> -
>> - if (bailearly == 19)
>> - bailout(dinfo);
>> -
>> - /* 2d acceleration init */
>> - if (dinfo->accel)
>> - intelfbhw_2d_start(dinfo);
>> -
>> - if (bailearly == 20)
>> - bailout(dinfo);
>> -
>> - if (noregister)
>> - bailout(dinfo);
>> -
>> - if (register_framebuffer(dinfo->info) < 0) {
>> - ERR_MSG("Cannot register framebuffer.\n");
>> - cleanup(dinfo);
>> - return -ENODEV;
>> - }
>> -
>> - dinfo->registered = 1;
>> - dinfo->open = 0;
>> -
>> - init_waitqueue_head(&dinfo->vsync.wait);
>> - spin_lock_init(&dinfo->int_lock);
>> - dinfo->irq_flags = 0;
>> - dinfo->vsync.pan_display = 0;
>> - dinfo->vsync.pan_offset = 0;
>> -
>> - return 0;
>> -
>> -err_out_pixmap:
>> - fb_dealloc_cmap(&info->cmap);
>> -err_out_cmap:
>> - framebuffer_release(info);
>> - return -ENODEV;
>> -}
>> -
>> -static void intelfb_pci_unregister(struct pci_dev *pdev)
>> -{
>> - struct intelfb_info *dinfo = pci_get_drvdata(pdev);
>> -
>> - DBG_MSG("intelfb_pci_unregister\n");
>> -
>> - if (!dinfo)
>> - return;
>> -
>> - cleanup(dinfo);
>> -}
>> -
>> -/***************************************************************
>> - * helper functions *
>> - ***************************************************************/
>> -
>> -__inline__ int intelfb_var_to_depth(const struct fb_var_screeninfo *var)
>> -{
>> - DBG_MSG("intelfb_var_to_depth: bpp: %d, green.length is %d\n",
>> - var->bits_per_pixel, var->green.length);
>> -
>> - switch (var->bits_per_pixel) {
>> - case 16:
>> - return (var->green.length == 6) ? 16 : 15;
>> - case 32:
>> - return 24;
>> - default:
>> - return var->bits_per_pixel;
>> - }
>> -}
>> -
>> -
>> -static __inline__ int var_to_refresh(const struct fb_var_screeninfo *var)
>> -{
>> - int xtot = var->xres + var->left_margin + var->right_margin +
>> - var->hsync_len;
>> - int ytot = var->yres + var->upper_margin + var->lower_margin +
>> - var->vsync_len;
>> -
>> - return (1000000000 / var->pixclock * 1000 + 500) / xtot / ytot;
>> -}
>> -
>> -/***************************************************************
>> - * Various initialisation functions *
>> - ***************************************************************/
>> -
>> -static void get_initial_mode(struct intelfb_info *dinfo)
>> -{
>> - struct fb_var_screeninfo *var;
>> - int xtot, ytot;
>> -
>> - DBG_MSG("get_initial_mode\n");
>> -
>> - dinfo->initial_vga = 1;
>> - dinfo->initial_fb_base = screen_info.lfb_base;
>> - dinfo->initial_video_ram = screen_info.lfb_size * KB(64);
>> - dinfo->initial_pitch = screen_info.lfb_linelength;
>> -
>> - var = &dinfo->initial_var;
>> - memset(var, 0, sizeof(*var));
>> - var->xres = screen_info.lfb_width;
>> - var->yres = screen_info.lfb_height;
>> - var->bits_per_pixel = screen_info.lfb_depth;
>> - switch (screen_info.lfb_depth) {
>> - case 15:
>> - var->bits_per_pixel = 16;
>> - break;
>> - case 24:
>> - var->bits_per_pixel = 32;
>> - break;
>> - }
>> -
>> - DBG_MSG("Initial info: FB is 0x%x/0x%x (%d kByte)\n",
>> - dinfo->initial_fb_base, dinfo->initial_video_ram,
>> - BtoKB(dinfo->initial_video_ram));
>> -
>> - DBG_MSG("Initial info: mode is %dx%d-%d (%d)\n",
>> - var->xres, var->yres, var->bits_per_pixel,
>> - dinfo->initial_pitch);
>> -
>> - /* Dummy timing values (assume 60Hz) */
>> - var->left_margin = (var->xres / 8) & 0xf8;
>> - var->right_margin = 32;
>> - var->upper_margin = 16;
>> - var->lower_margin = 4;
>> - var->hsync_len = (var->xres / 8) & 0xf8;
>> - var->vsync_len = 4;
>> -
>> - xtot = var->xres + var->left_margin +
>> - var->right_margin + var->hsync_len;
>> - ytot = var->yres + var->upper_margin +
>> - var->lower_margin + var->vsync_len;
>> - var->pixclock = 10000000 / xtot * 1000 / ytot * 100 / 60;
>> -
>> - var->height = -1;
>> - var->width = -1;
>> -
>> - if (var->bits_per_pixel > 8) {
>> - var->red.offset = screen_info.red_pos;
>> - var->red.length = screen_info.red_size;
>> - var->green.offset = screen_info.green_pos;
>> - var->green.length = screen_info.green_size;
>> - var->blue.offset = screen_info.blue_pos;
>> - var->blue.length = screen_info.blue_size;
>> - var->transp.offset = screen_info.rsvd_pos;
>> - var->transp.length = screen_info.rsvd_size;
>> - } else {
>> - var->red.length = 8;
>> - var->green.length = 8;
>> - var->blue.length = 8;
>> - }
>> -}
>> -
>> -static int intelfb_init_var(struct intelfb_info *dinfo)
>> -{
>> - struct fb_var_screeninfo *var;
>> - int msrc = 0;
>> -
>> - DBG_MSG("intelfb_init_var\n");
>> -
>> - var = &dinfo->info->var;
>> - if (FIXED_MODE(dinfo)) {
>> - memcpy(var, &dinfo->initial_var,
>> - sizeof(struct fb_var_screeninfo));
>> - msrc = 5;
>> - } else {
>> - const u8 *edid_s = fb_firmware_edid(&dinfo->pdev->dev);
>> - u8 *edid_d = NULL;
>> -
>> - if (edid_s) {
>> - edid_d = kmemdup(edid_s, EDID_LENGTH, GFP_KERNEL);
>> -
>> - if (edid_d) {
>> - fb_edid_to_monspecs(edid_d,
>> - &dinfo->info->monspecs);
>> - kfree(edid_d);
>> - }
>> - }
>> -
>> - if (mode) {
>> - printk("intelfb: Looking for mode in private "
>> - "database\n");
>> - msrc = fb_find_mode(var, dinfo->info, mode,
>> - dinfo->info->monspecs.modedb,
>> - dinfo->info->monspecs.modedb_len,
>> - NULL, 0);
>> -
>> - if (msrc && msrc > 1) {
>> - printk("intelfb: No mode in private database, "
>> - "intelfb: looking for mode in global "
>> - "database ");
>> - msrc = fb_find_mode(var, dinfo->info, mode,
>> - NULL, 0, NULL, 0);
>> -
>> - if (msrc)
>> - msrc |= 8;
>> - }
>> -
>> - }
>> -
>> - if (!msrc)
>> - msrc = fb_find_mode(var, dinfo->info, PREFERRED_MODE,
>> - NULL, 0, NULL, 0);
>> - }
>> -
>> - if (!msrc) {
>> - ERR_MSG("Cannot find a suitable video mode.\n");
>> - return 1;
>> - }
>> -
>> - INF_MSG("Initial video mode is %dx%d-%d@%d.\n", var->xres, var->yres,
>> - var->bits_per_pixel, var_to_refresh(var));
>> -
>> - DBG_MSG("Initial video mode is from %d.\n", msrc);
>> -
>> -#if ALLOCATE_FOR_PANNING
>> - /* Allow use of half of the video ram for panning */
>> - var->xres_virtual = var->xres;
>> - var->yres_virtual =
>> - dinfo->fb.size / 2 / (var->bits_per_pixel * var->xres);
>> - if (var->yres_virtual < var->yres)
>> - var->yres_virtual = var->yres;
>> -#else
>> - var->yres_virtual = var->yres;
>> -#endif
>> -
>> - if (dinfo->accel)
>> - var->accel_flags |= FB_ACCELF_TEXT;
>> - else
>> - var->accel_flags &= ~FB_ACCELF_TEXT;
>> -
>> - return 0;
>> -}
>> -
>> -static int intelfb_set_fbinfo(struct intelfb_info *dinfo)
>> -{
>> - struct fb_info *info = dinfo->info;
>> -
>> - DBG_MSG("intelfb_set_fbinfo\n");
>> -
>> - info->fbops = &intel_fb_ops;
>> - info->pseudo_palette = dinfo->pseudo_palette;
>> -
>> - info->pixmap.size = 64*1024;
>> - info->pixmap.buf_align = 8;
>> - info->pixmap.access_align = 32;
>> - info->pixmap.flags = FB_PIXMAP_SYSTEM;
>> -
>> - if (intelfb_init_var(dinfo))
>> - return 1;
>> -
>> - info->pixmap.scan_align = 1;
>> - strcpy(info->fix.id, dinfo->name);
>> - info->fix.smem_start = dinfo->fb.physical;
>> - info->fix.smem_len = dinfo->fb.size;
>> - info->fix.type = FB_TYPE_PACKED_PIXELS;
>> - info->fix.type_aux = 0;
>> - info->fix.xpanstep = 8;
>> - info->fix.ypanstep = 1;
>> - info->fix.ywrapstep = 0;
>> - info->fix.mmio_start = dinfo->mmio_base_phys;
>> - info->fix.mmio_len = INTEL_REG_SIZE;
>> - info->fix.accel = FB_ACCEL_I830;
>> - update_dinfo(dinfo, &info->var);
>> -
>> - return 0;
>> -}
>> -
>> -/* Update dinfo to match the active video mode. */
>> -static void update_dinfo(struct intelfb_info *dinfo,
>> - struct fb_var_screeninfo *var)
>> -{
>> - DBG_MSG("update_dinfo\n");
>> -
>> - dinfo->bpp = var->bits_per_pixel;
>> - dinfo->depth = intelfb_var_to_depth(var);
>> - dinfo->xres = var->xres;
>> - dinfo->yres = var->xres;
>> - dinfo->pixclock = var->pixclock;
>> -
>> - dinfo->info->fix.visual = dinfo->visual;
>> - dinfo->info->fix.line_length = dinfo->pitch;
>> -
>> - switch (dinfo->bpp) {
>> - case 8:
>> - dinfo->visual = FB_VISUAL_PSEUDOCOLOR;
>> - dinfo->pitch = var->xres_virtual;
>> - break;
>> - case 16:
>> - dinfo->visual = FB_VISUAL_TRUECOLOR;
>> - dinfo->pitch = var->xres_virtual * 2;
>> - break;
>> - case 32:
>> - dinfo->visual = FB_VISUAL_TRUECOLOR;
>> - dinfo->pitch = var->xres_virtual * 4;
>> - break;
>> - }
>> -
>> - /* Make sure the line length is a aligned correctly. */
>> - if (IS_I9XX(dinfo))
>> - dinfo->pitch = ROUND_UP_TO(dinfo->pitch, STRIDE_ALIGNMENT_I9XX);
>> - else
>> - dinfo->pitch = ROUND_UP_TO(dinfo->pitch, STRIDE_ALIGNMENT);
>> -
>> - if (FIXED_MODE(dinfo))
>> - dinfo->pitch = dinfo->initial_pitch;
>> -
>> - dinfo->info->screen_base = (char __iomem *)dinfo->fb.virtual;
>> - dinfo->info->fix.line_length = dinfo->pitch;
>> - dinfo->info->fix.visual = dinfo->visual;
>> -}
>> -
>> -/* fbops functions */
>> -
>> -/***************************************************************
>> - * fbdev interface *
>> - ***************************************************************/
>> -
>> -static int intelfb_open(struct fb_info *info, int user)
>> -{
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> -
>> - if (user)
>> - dinfo->open++;
>> -
>> - return 0;
>> -}
>> -
>> -static int intelfb_release(struct fb_info *info, int user)
>> -{
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> -
>> - if (user) {
>> - dinfo->open--;
>> - msleep(1);
>> - if (!dinfo->open)
>> - intelfbhw_disable_irq(dinfo);
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -static int intelfb_check_var(struct fb_var_screeninfo *var,
>> - struct fb_info *info)
>> -{
>> - int change_var = 0;
>> - struct fb_var_screeninfo v;
>> - struct intelfb_info *dinfo;
>> - static int first = 1;
>> - int i;
>> - /* Good pitches to allow tiling. Don't care about pitches < 1024. */
>> - static const int pitches[] = {
>> - 128 * 8,
>> - 128 * 16,
>> - 128 * 32,
>> - 128 * 64,
>> - 0
>> - };
>> -
>> - DBG_MSG("intelfb_check_var: accel_flags is %d\n", var->accel_flags);
>> -
>> - dinfo = GET_DINFO(info);
>> -
>> - if (!var->pixclock)
>> - return -EINVAL;
>> -
>> - /* update the pitch */
>> - if (intelfbhw_validate_mode(dinfo, var) != 0)
>> - return -EINVAL;
>> -
>> - v = *var;
>> -
>> - for (i = 0; pitches[i] != 0; i++) {
>> - if (pitches[i] >= v.xres_virtual) {
>> - v.xres_virtual = pitches[i];
>> - break;
>> - }
>> - }
>> -
>> - /* Check for a supported bpp. */
>> - if (v.bits_per_pixel <= 8)
>> - v.bits_per_pixel = 8;
>> - else if (v.bits_per_pixel <= 16) {
>> - if (v.bits_per_pixel == 16)
>> - v.green.length = 6;
>> - v.bits_per_pixel = 16;
>> - } else if (v.bits_per_pixel <= 32)
>> - v.bits_per_pixel = 32;
>> - else
>> - return -EINVAL;
>> -
>> - change_var = ((info->var.xres != var->xres) ||
>> - (info->var.yres != var->yres) ||
>> - (info->var.xres_virtual != var->xres_virtual) ||
>> - (info->var.yres_virtual != var->yres_virtual) ||
>> - (info->var.bits_per_pixel != var->bits_per_pixel) ||
>> - memcmp(&info->var.red, &var->red, sizeof(var->red)) ||
>> - memcmp(&info->var.green, &var->green,
>> - sizeof(var->green)) ||
>> - memcmp(&info->var.blue, &var->blue, sizeof(var->blue)));
>> -
>> - if (FIXED_MODE(dinfo) &&
>> - (change_var ||
>> - var->yres_virtual > dinfo->initial_var.yres_virtual ||
>> - var->yres_virtual < dinfo->initial_var.yres ||
>> - var->xoffset || var->nonstd)) {
>> - if (first) {
>> - ERR_MSG("Changing the video mode is not supported.\n");
>> - first = 0;
>> - }
>> - return -EINVAL;
>> - }
>> -
>> - switch (intelfb_var_to_depth(&v)) {
>> - case 8:
>> - v.red.offset = v.green.offset = v.blue.offset = 0;
>> - v.red.length = v.green.length = v.blue.length = 8;
>> - v.transp.offset = v.transp.length = 0;
>> - break;
>> - case 15:
>> - v.red.offset = 10;
>> - v.green.offset = 5;
>> - v.blue.offset = 0;
>> - v.red.length = v.green.length = v.blue.length = 5;
>> - v.transp.offset = v.transp.length = 0;
>> - break;
>> - case 16:
>> - v.red.offset = 11;
>> - v.green.offset = 5;
>> - v.blue.offset = 0;
>> - v.red.length = 5;
>> - v.green.length = 6;
>> - v.blue.length = 5;
>> - v.transp.offset = v.transp.length = 0;
>> - break;
>> - case 24:
>> - v.red.offset = 16;
>> - v.green.offset = 8;
>> - v.blue.offset = 0;
>> - v.red.length = v.green.length = v.blue.length = 8;
>> - v.transp.offset = v.transp.length = 0;
>> - break;
>> - case 32:
>> - v.red.offset = 16;
>> - v.green.offset = 8;
>> - v.blue.offset = 0;
>> - v.red.length = v.green.length = v.blue.length = 8;
>> - v.transp.offset = 24;
>> - v.transp.length = 8;
>> - break;
>> - }
>> -
>> - if (v.xoffset > v.xres_virtual - v.xres)
>> - v.xoffset = v.xres_virtual - v.xres;
>> - if (v.yoffset > v.yres_virtual - v.yres)
>> - v.yoffset = v.yres_virtual - v.yres;
>> -
>> - v.red.msb_right = v.green.msb_right = v.blue.msb_right =
>> - v.transp.msb_right = 0;
>> -
>> - *var = v;
>> -
>> - return 0;
>> -}
>> -
>> -static int intelfb_set_par(struct fb_info *info)
>> -{
>> - struct intelfb_hwstate *hw;
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> -
>> - if (FIXED_MODE(dinfo)) {
>> - ERR_MSG("Changing the video mode is not supported.\n");
>> - return -EINVAL;
>> - }
>> -
>> - hw = kmalloc(sizeof(*hw), GFP_ATOMIC);
>> - if (!hw)
>> - return -ENOMEM;
>> -
>> - DBG_MSG("intelfb_set_par (%dx%d-%d)\n", info->var.xres,
>> - info->var.yres, info->var.bits_per_pixel);
>> -
>> - /*
>> - * Disable VCO prior to timing register change.
>> - */
>> - OUTREG(DPLL_A, INREG(DPLL_A) & ~DPLL_VCO_ENABLE);
>> -
>> - intelfb_blank(FB_BLANK_POWERDOWN, info);
>> -
>> - if (ACCEL(dinfo, info))
>> - intelfbhw_2d_stop(dinfo);
>> -
>> - memcpy(hw, &dinfo->save_state, sizeof(*hw));
>> - if (intelfbhw_mode_to_hw(dinfo, hw, &info->var))
>> - goto invalid_mode;
>> - if (intelfbhw_program_mode(dinfo, hw, 0))
>> - goto invalid_mode;
>> -
>> -#if REGDUMP > 0
>> - intelfbhw_read_hw_state(dinfo, hw, 0);
>> - intelfbhw_print_hw_state(dinfo, hw);
>> -#endif
>> -
>> - update_dinfo(dinfo, &info->var);
>> -
>> - if (ACCEL(dinfo, info))
>> - intelfbhw_2d_start(dinfo);
>> -
>> - intelfb_pan_display(&info->var, info);
>> -
>> - intelfb_blank(FB_BLANK_UNBLANK, info);
>> -
>> - if (ACCEL(dinfo, info)) {
>> - info->flags = FBINFO_HWACCEL_YPAN |
>> - FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
>> - FBINFO_HWACCEL_IMAGEBLIT;
>> - } else
>> - info->flags = FBINFO_HWACCEL_YPAN;
>> -
>> - kfree(hw);
>> - return 0;
>> -invalid_mode:
>> - kfree(hw);
>> - return -EINVAL;
>> -}
>> -
>> -static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
>> - unsigned blue, unsigned transp,
>> - struct fb_info *info)
>> -{
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfb_setcolreg: regno %d, depth %d\n", regno, dinfo->depth);
>> -#endif
>> -
>> - if (regno > 255)
>> - return 1;
>> -
>> - if (dinfo->depth == 8) {
>> - red >>= 8;
>> - green >>= 8;
>> - blue >>= 8;
>> -
>> - intelfbhw_setcolreg(dinfo, regno, red, green, blue,
>> - transp);
>> - }
>> -
>> - if (regno < 16) {
>> - switch (dinfo->depth) {
>> - case 15:
>> - dinfo->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
>> - ((green & 0xf800) >> 6) |
>> - ((blue & 0xf800) >> 11);
>> - break;
>> - case 16:
>> - dinfo->pseudo_palette[regno] = (red & 0xf800) |
>> - ((green & 0xfc00) >> 5) |
>> - ((blue & 0xf800) >> 11);
>> - break;
>> - case 24:
>> - dinfo->pseudo_palette[regno] = ((red & 0xff00) << 8) |
>> - (green & 0xff00) |
>> - ((blue & 0xff00) >> 8);
>> - break;
>> - }
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -static int intelfb_blank(int blank, struct fb_info *info)
>> -{
>> - intelfbhw_do_blank(blank, info);
>> - return 0;
>> -}
>> -
>> -static int intelfb_pan_display(struct fb_var_screeninfo *var,
>> - struct fb_info *info)
>> -{
>> - intelfbhw_pan_display(var, info);
>> - return 0;
>> -}
>> -
>> -/* When/if we have our own ioctls. */
>> -static int intelfb_ioctl(struct fb_info *info, unsigned int cmd,
>> - unsigned long arg)
>> -{
>> - int retval = 0;
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> - u32 pipe = 0;
>> -
>> - switch (cmd) {
>> - case FBIO_WAITFORVSYNC:
>> - if (get_user(pipe, (__u32 __user *)arg))
>> - return -EFAULT;
>> -
>> - retval = intelfbhw_wait_for_vsync(dinfo, pipe);
>> - break;
>> - default:
>> - break;
>> - }
>> -
>> - return retval;
>> -}
>> -
>> -static void intelfb_fillrect (struct fb_info *info,
>> - const struct fb_fillrect *rect)
>> -{
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> - u32 rop, color;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfb_fillrect\n");
>> -#endif
>> -
>> - if (!ACCEL(dinfo, info) || dinfo->depth == 4) {
>> - cfb_fillrect(info, rect);
>> - return;
>> - }
>> -
>> - if (rect->rop == ROP_COPY)
>> - rop = PAT_ROP_GXCOPY;
>> - else /* ROP_XOR */
>> - rop = PAT_ROP_GXXOR;
>> -
>> - if (dinfo->depth != 8)
>> - color = dinfo->pseudo_palette[rect->color];
>> - else
>> - color = rect->color;
>> -
>> - intelfbhw_do_fillrect(dinfo, rect->dx, rect->dy,
>> - rect->width, rect->height, color,
>> - dinfo->pitch, info->var.bits_per_pixel,
>> - rop);
>> -}
>> -
>> -static void intelfb_copyarea(struct fb_info *info,
>> - const struct fb_copyarea *region)
>> -{
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfb_copyarea\n");
>> -#endif
>> -
>> - if (!ACCEL(dinfo, info) || dinfo->depth == 4) {
>> - cfb_copyarea(info, region);
>> - return;
>> - }
>> -
>> - intelfbhw_do_bitblt(dinfo, region->sx, region->sy, region->dx,
>> - region->dy, region->width, region->height,
>> - dinfo->pitch, info->var.bits_per_pixel);
>> -}
>> -
>> -static void intelfb_imageblit(struct fb_info *info,
>> - const struct fb_image *image)
>> -{
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> - u32 fgcolor, bgcolor;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfb_imageblit\n");
>> -#endif
>> -
>> - if (!ACCEL(dinfo, info) || dinfo->depth == 4
>> - || image->depth != 1) {
>> - cfb_imageblit(info, image);
>> - return;
>> - }
>> -
>> - if (dinfo->depth != 8) {
>> - fgcolor = dinfo->pseudo_palette[image->fg_color];
>> - bgcolor = dinfo->pseudo_palette[image->bg_color];
>> - } else {
>> - fgcolor = image->fg_color;
>> - bgcolor = image->bg_color;
>> - }
>> -
>> - if (!intelfbhw_do_drawglyph(dinfo, fgcolor, bgcolor, image->width,
>> - image->height, image->data,
>> - image->dx, image->dy,
>> - dinfo->pitch, info->var.bits_per_pixel)) {
>> - cfb_imageblit(info, image);
>> - return;
>> - }
>> -}
>> -
>> -static int intelfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
>> -{
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> - u32 physical;
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfb_cursor\n");
>> -#endif
>> -
>> - if (!dinfo->hwcursor)
>> - return -ENODEV;
>> -
>> - intelfbhw_cursor_hide(dinfo);
>> -
>> - /* If XFree killed the cursor - restore it */
>> - physical = (dinfo->mobile || IS_I9XX(dinfo)) ? dinfo->cursor.physical :
>> - (dinfo->cursor.offset << 12);
>> -
>> - if (INREG(CURSOR_A_BASEADDR) != physical) {
>> - u32 fg, bg;
>> -
>> - DBG_MSG("the cursor was killed - restore it !!\n");
>> - DBG_MSG("size %d, %d pos %d, %d\n",
>> - cursor->image.width, cursor->image.height,
>> - cursor->image.dx, cursor->image.dy);
>> -
>> - intelfbhw_cursor_init(dinfo);
>> - intelfbhw_cursor_reset(dinfo);
>> - intelfbhw_cursor_setpos(dinfo, cursor->image.dx,
>> - cursor->image.dy);
>> -
>> - if (dinfo->depth != 8) {
>> - fg =dinfo->pseudo_palette[cursor->image.fg_color];
>> - bg =dinfo->pseudo_palette[cursor->image.bg_color];
>> - } else {
>> - fg = cursor->image.fg_color;
>> - bg = cursor->image.bg_color;
>> - }
>> - intelfbhw_cursor_setcolor(dinfo, bg, fg);
>> - intelfbhw_cursor_load(dinfo, cursor->image.width,
>> - cursor->image.height,
>> - dinfo->cursor_src);
>> -
>> - if (cursor->enable)
>> - intelfbhw_cursor_show(dinfo);
>> - return 0;
>> - }
>> -
>> - if (cursor->set & FB_CUR_SETPOS) {
>> - u32 dx, dy;
>> -
>> - dx = cursor->image.dx - info->var.xoffset;
>> - dy = cursor->image.dy - info->var.yoffset;
>> -
>> - intelfbhw_cursor_setpos(dinfo, dx, dy);
>> - }
>> -
>> - if (cursor->set & FB_CUR_SETSIZE) {
>> - if (cursor->image.width > 64 || cursor->image.height > 64)
>> - return -ENXIO;
>> -
>> - intelfbhw_cursor_reset(dinfo);
>> - }
>> -
>> - if (cursor->set & FB_CUR_SETCMAP) {
>> - u32 fg, bg;
>> -
>> - if (dinfo->depth != 8) {
>> - fg = dinfo->pseudo_palette[cursor->image.fg_color];
>> - bg = dinfo->pseudo_palette[cursor->image.bg_color];
>> - } else {
>> - fg = cursor->image.fg_color;
>> - bg = cursor->image.bg_color;
>> - }
>> -
>> - intelfbhw_cursor_setcolor(dinfo, bg, fg);
>> - }
>> -
>> - if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
>> - u32 s_pitch = (ROUND_UP_TO(cursor->image.width, 8) / 8);
>> - u32 size = s_pitch * cursor->image.height;
>> - u8 *dat = (u8 *) cursor->image.data;
>> - u8 *msk = (u8 *) cursor->mask;
>> - u8 src[64];
>> - u32 i;
>> -
>> - if (cursor->image.depth != 1)
>> - return -ENXIO;
>> -
>> - switch (cursor->rop) {
>> - case ROP_XOR:
>> - for (i = 0; i < size; i++)
>> - src[i] = dat[i] ^ msk[i];
>> - break;
>> - case ROP_COPY:
>> - default:
>> - for (i = 0; i < size; i++)
>> - src[i] = dat[i] & msk[i];
>> - break;
>> - }
>> -
>> - /* save the bitmap to restore it when XFree will
>> - make the cursor dirty */
>> - memcpy(dinfo->cursor_src, src, size);
>> -
>> - intelfbhw_cursor_load(dinfo, cursor->image.width,
>> - cursor->image.height, src);
>> - }
>> -
>> - if (cursor->enable)
>> - intelfbhw_cursor_show(dinfo);
>> -
>> - return 0;
>> -}
>> -
>> -static int intelfb_sync(struct fb_info *info)
>> -{
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfb_sync\n");
>> -#endif
>> -
>> - if (dinfo->ring_lockup)
>> - return 0;
>> -
>> - intelfbhw_do_sync(dinfo);
>> - return 0;
>> -}
>> -
>> diff --git a/drivers/video/fbdev/intelfb/intelfbhw.c b/drivers/video/fbdev/intelfb/intelfbhw.c
>> deleted file mode 100644
>> index 2086e06532ee..000000000000
>> --- a/drivers/video/fbdev/intelfb/intelfbhw.c
>> +++ /dev/null
>> @@ -1,2115 +0,0 @@
>> -/*
>> - * intelfb
>> - *
>> - * Linux framebuffer driver for Intel(R) 865G integrated graphics chips.
>> - *
>> - * Copyright © 2002, 2003 David Dawes <dawes at xfree86.org>
>> - * 2004 Sylvain Meyer
>> - *
>> - * This driver consists of two parts. The first part (intelfbdrv.c) provides
>> - * the basic fbdev interfaces, is derived in part from the radeonfb and
>> - * vesafb drivers, and is covered by the GPL. The second part (intelfbhw.c)
>> - * provides the code to program the hardware. Most of it is derived from
>> - * the i810/i830 XFree86 driver. The HW-specific code is covered here
>> - * under a dual license (GPL and MIT/XFree86 license).
>> - *
>> - * Author: David Dawes
>> - *
>> - */
>> -
>> -/* $DHD: intelfb/intelfbhw.c,v 1.9 2003/06/27 15:06:25 dawes Exp $ */
>> -
>> -#include <linux/module.h>
>> -#include <linux/kernel.h>
>> -#include <linux/errno.h>
>> -#include <linux/string.h>
>> -#include <linux/mm.h>
>> -#include <linux/delay.h>
>> -#include <linux/fb.h>
>> -#include <linux/ioport.h>
>> -#include <linux/init.h>
>> -#include <linux/pci.h>
>> -#include <linux/vmalloc.h>
>> -#include <linux/pagemap.h>
>> -#include <linux/interrupt.h>
>> -
>> -#include <asm/io.h>
>> -
>> -#include "intelfb.h"
>> -#include "intelfbhw.h"
>> -
>> -struct pll_min_max {
>> - int min_m, max_m, min_m1, max_m1;
>> - int min_m2, max_m2, min_n, max_n;
>> - int min_p, max_p, min_p1, max_p1;
>> - int min_vco, max_vco, p_transition_clk, ref_clk;
>> - int p_inc_lo, p_inc_hi;
>> -};
>> -
>> -#define PLLS_I8xx 0
>> -#define PLLS_I9xx 1
>> -#define PLLS_MAX 2
>> -
>> -static struct pll_min_max plls[PLLS_MAX] = {
>> - { 108, 140, 18, 26,
>> - 6, 16, 3, 16,
>> - 4, 128, 0, 31,
>> - 930000, 1400000, 165000, 48000,
>> - 4, 2 }, /* I8xx */
>> -
>> - { 75, 120, 10, 20,
>> - 5, 9, 4, 7,
>> - 5, 80, 1, 8,
>> - 1400000, 2800000, 200000, 96000,
>> - 10, 5 } /* I9xx */
>> -};
>> -
>> -int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo)
>> -{
>> - u32 tmp;
>> - if (!pdev || !dinfo)
>> - return 1;
>> -
>> - switch (pdev->device) {
>> - case PCI_DEVICE_ID_INTEL_830M:
>> - dinfo->name = "Intel(R) 830M";
>> - dinfo->chipset = INTEL_830M;
>> - dinfo->mobile = 1;
>> - dinfo->pll_index = PLLS_I8xx;
>> - return 0;
>> - case PCI_DEVICE_ID_INTEL_845G:
>> - dinfo->name = "Intel(R) 845G";
>> - dinfo->chipset = INTEL_845G;
>> - dinfo->mobile = 0;
>> - dinfo->pll_index = PLLS_I8xx;
>> - return 0;
>> - case PCI_DEVICE_ID_INTEL_854:
>> - dinfo->mobile = 1;
>> - dinfo->name = "Intel(R) 854";
>> - dinfo->chipset = INTEL_854;
>> - return 0;
>> - case PCI_DEVICE_ID_INTEL_85XGM:
>> - tmp = 0;
>> - dinfo->mobile = 1;
>> - dinfo->pll_index = PLLS_I8xx;
>> - pci_read_config_dword(pdev, INTEL_85X_CAPID, &tmp);
>> - switch ((tmp >> INTEL_85X_VARIANT_SHIFT) &
>> - INTEL_85X_VARIANT_MASK) {
>> - case INTEL_VAR_855GME:
>> - dinfo->name = "Intel(R) 855GME";
>> - dinfo->chipset = INTEL_855GME;
>> - return 0;
>> - case INTEL_VAR_855GM:
>> - dinfo->name = "Intel(R) 855GM";
>> - dinfo->chipset = INTEL_855GM;
>> - return 0;
>> - case INTEL_VAR_852GME:
>> - dinfo->name = "Intel(R) 852GME";
>> - dinfo->chipset = INTEL_852GME;
>> - return 0;
>> - case INTEL_VAR_852GM:
>> - dinfo->name = "Intel(R) 852GM";
>> - dinfo->chipset = INTEL_852GM;
>> - return 0;
>> - default:
>> - dinfo->name = "Intel(R) 852GM/855GM";
>> - dinfo->chipset = INTEL_85XGM;
>> - return 0;
>> - }
>> - break;
>> - case PCI_DEVICE_ID_INTEL_865G:
>> - dinfo->name = "Intel(R) 865G";
>> - dinfo->chipset = INTEL_865G;
>> - dinfo->mobile = 0;
>> - dinfo->pll_index = PLLS_I8xx;
>> - return 0;
>> - case PCI_DEVICE_ID_INTEL_915G:
>> - dinfo->name = "Intel(R) 915G";
>> - dinfo->chipset = INTEL_915G;
>> - dinfo->mobile = 0;
>> - dinfo->pll_index = PLLS_I9xx;
>> - return 0;
>> - case PCI_DEVICE_ID_INTEL_915GM:
>> - dinfo->name = "Intel(R) 915GM";
>> - dinfo->chipset = INTEL_915GM;
>> - dinfo->mobile = 1;
>> - dinfo->pll_index = PLLS_I9xx;
>> - return 0;
>> - case PCI_DEVICE_ID_INTEL_945G:
>> - dinfo->name = "Intel(R) 945G";
>> - dinfo->chipset = INTEL_945G;
>> - dinfo->mobile = 0;
>> - dinfo->pll_index = PLLS_I9xx;
>> - return 0;
>> - case PCI_DEVICE_ID_INTEL_945GM:
>> - dinfo->name = "Intel(R) 945GM";
>> - dinfo->chipset = INTEL_945GM;
>> - dinfo->mobile = 1;
>> - dinfo->pll_index = PLLS_I9xx;
>> - return 0;
>> - case PCI_DEVICE_ID_INTEL_945GME:
>> - dinfo->name = "Intel(R) 945GME";
>> - dinfo->chipset = INTEL_945GME;
>> - dinfo->mobile = 1;
>> - dinfo->pll_index = PLLS_I9xx;
>> - return 0;
>> - case PCI_DEVICE_ID_INTEL_965G:
>> - dinfo->name = "Intel(R) 965G";
>> - dinfo->chipset = INTEL_965G;
>> - dinfo->mobile = 0;
>> - dinfo->pll_index = PLLS_I9xx;
>> - return 0;
>> - case PCI_DEVICE_ID_INTEL_965GM:
>> - dinfo->name = "Intel(R) 965GM";
>> - dinfo->chipset = INTEL_965GM;
>> - dinfo->mobile = 1;
>> - dinfo->pll_index = PLLS_I9xx;
>> - return 0;
>> - default:
>> - return 1;
>> - }
>> -}
>> -
>> -int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
>> - int *stolen_size)
>> -{
>> - struct pci_dev *bridge_dev;
>> - u16 tmp;
>> - int stolen_overhead;
>> -
>> - if (!pdev || !aperture_size || !stolen_size)
>> - return 1;
>> -
>> - /* Find the bridge device. It is always 0:0.0 */
>> - bridge_dev = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), 0,
>> - PCI_DEVFN(0, 0));
>> - if (!bridge_dev) {
>> - ERR_MSG("cannot find bridge device\n");
>> - return 1;
>> - }
>> -
>> - /* Get the fb aperture size and "stolen" memory amount. */
>> - tmp = 0;
>> - pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
>> - pci_dev_put(bridge_dev);
>> -
>> - switch (pdev->device) {
>> - case PCI_DEVICE_ID_INTEL_915G:
>> - case PCI_DEVICE_ID_INTEL_915GM:
>> - case PCI_DEVICE_ID_INTEL_945G:
>> - case PCI_DEVICE_ID_INTEL_945GM:
>> - case PCI_DEVICE_ID_INTEL_945GME:
>> - case PCI_DEVICE_ID_INTEL_965G:
>> - case PCI_DEVICE_ID_INTEL_965GM:
>> - /*
>> - * 915, 945 and 965 chipsets support 64MB, 128MB or 256MB
>> - * aperture. Determine size from PCI resource length.
>> - */
>> - *aperture_size = pci_resource_len(pdev, 2);
>> - break;
>> - default:
>> - if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
>> - *aperture_size = MB(64);
>> - else
>> - *aperture_size = MB(128);
>> - break;
>> - }
>> -
>> - /* Stolen memory size is reduced by the GTT and the popup.
>> - GTT is 1K per MB of aperture size, and popup is 4K. */
>> - stolen_overhead = (*aperture_size / MB(1)) + 4;
>> - switch(pdev->device) {
>> - case PCI_DEVICE_ID_INTEL_830M:
>> - case PCI_DEVICE_ID_INTEL_845G:
>> - switch (tmp & INTEL_830_GMCH_GMS_MASK) {
>> - case INTEL_830_GMCH_GMS_STOLEN_512:
>> - *stolen_size = KB(512) - KB(stolen_overhead);
>> - return 0;
>> - case INTEL_830_GMCH_GMS_STOLEN_1024:
>> - *stolen_size = MB(1) - KB(stolen_overhead);
>> - return 0;
>> - case INTEL_830_GMCH_GMS_STOLEN_8192:
>> - *stolen_size = MB(8) - KB(stolen_overhead);
>> - return 0;
>> - case INTEL_830_GMCH_GMS_LOCAL:
>> - ERR_MSG("only local memory found\n");
>> - return 1;
>> - case INTEL_830_GMCH_GMS_DISABLED:
>> - ERR_MSG("video memory is disabled\n");
>> - return 1;
>> - default:
>> - ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
>> - tmp & INTEL_830_GMCH_GMS_MASK);
>> - return 1;
>> - }
>> - break;
>> - default:
>> - switch (tmp & INTEL_855_GMCH_GMS_MASK) {
>> - case INTEL_855_GMCH_GMS_STOLEN_1M:
>> - *stolen_size = MB(1) - KB(stolen_overhead);
>> - return 0;
>> - case INTEL_855_GMCH_GMS_STOLEN_4M:
>> - *stolen_size = MB(4) - KB(stolen_overhead);
>> - return 0;
>> - case INTEL_855_GMCH_GMS_STOLEN_8M:
>> - *stolen_size = MB(8) - KB(stolen_overhead);
>> - return 0;
>> - case INTEL_855_GMCH_GMS_STOLEN_16M:
>> - *stolen_size = MB(16) - KB(stolen_overhead);
>> - return 0;
>> - case INTEL_855_GMCH_GMS_STOLEN_32M:
>> - *stolen_size = MB(32) - KB(stolen_overhead);
>> - return 0;
>> - case INTEL_915G_GMCH_GMS_STOLEN_48M:
>> - *stolen_size = MB(48) - KB(stolen_overhead);
>> - return 0;
>> - case INTEL_915G_GMCH_GMS_STOLEN_64M:
>> - *stolen_size = MB(64) - KB(stolen_overhead);
>> - return 0;
>> - case INTEL_855_GMCH_GMS_DISABLED:
>> - ERR_MSG("video memory is disabled\n");
>> - return 0;
>> - default:
>> - ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
>> - tmp & INTEL_855_GMCH_GMS_MASK);
>> - return 1;
>> - }
>> - }
>> -}
>> -
>> -int intelfbhw_check_non_crt(struct intelfb_info *dinfo)
>> -{
>> - int dvo = 0;
>> -
>> - if (INREG(LVDS) & PORT_ENABLE)
>> - dvo |= LVDS_PORT;
>> - if (INREG(DVOA) & PORT_ENABLE)
>> - dvo |= DVOA_PORT;
>> - if (INREG(DVOB) & PORT_ENABLE)
>> - dvo |= DVOB_PORT;
>> - if (INREG(DVOC) & PORT_ENABLE)
>> - dvo |= DVOC_PORT;
>> -
>> - return dvo;
>> -}
>> -
>> -const char * intelfbhw_dvo_to_string(int dvo)
>> -{
>> - if (dvo & DVOA_PORT)
>> - return "DVO port A";
>> - else if (dvo & DVOB_PORT)
>> - return "DVO port B";
>> - else if (dvo & DVOC_PORT)
>> - return "DVO port C";
>> - else if (dvo & LVDS_PORT)
>> - return "LVDS port";
>> - else
>> - return NULL;
>> -}
>> -
>> -
>> -int intelfbhw_validate_mode(struct intelfb_info *dinfo,
>> - struct fb_var_screeninfo *var)
>> -{
>> - int bytes_per_pixel;
>> - int tmp;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_validate_mode\n");
>> -#endif
>> -
>> - bytes_per_pixel = var->bits_per_pixel / 8;
>> - if (bytes_per_pixel == 3)
>> - bytes_per_pixel = 4;
>> -
>> - /* Check if enough video memory. */
>> - tmp = var->yres_virtual * var->xres_virtual * bytes_per_pixel;
>> - if (tmp > dinfo->fb.size) {
>> - WRN_MSG("Not enough video ram for mode "
>> - "(%d KByte vs %d KByte).\n",
>> - BtoKB(tmp), BtoKB(dinfo->fb.size));
>> - return 1;
>> - }
>> -
>> - /* Check if x/y limits are OK. */
>> - if (var->xres - 1 > HACTIVE_MASK) {
>> - WRN_MSG("X resolution too large (%d vs %d).\n",
>> - var->xres, HACTIVE_MASK + 1);
>> - return 1;
>> - }
>> - if (var->yres - 1 > VACTIVE_MASK) {
>> - WRN_MSG("Y resolution too large (%d vs %d).\n",
>> - var->yres, VACTIVE_MASK + 1);
>> - return 1;
>> - }
>> - if (var->xres < 4) {
>> - WRN_MSG("X resolution too small (%d vs 4).\n", var->xres);
>> - return 1;
>> - }
>> - if (var->yres < 4) {
>> - WRN_MSG("Y resolution too small (%d vs 4).\n", var->yres);
>> - return 1;
>> - }
>> -
>> - /* Check for doublescan modes. */
>> - if (var->vmode & FB_VMODE_DOUBLE) {
>> - WRN_MSG("Mode is double-scan.\n");
>> - return 1;
>> - }
>> -
>> - if ((var->vmode & FB_VMODE_INTERLACED) && (var->yres & 1)) {
>> - WRN_MSG("Odd number of lines in interlaced mode\n");
>> - return 1;
>> - }
>> -
>> - /* Check if clock is OK. */
>> - tmp = 1000000000 / var->pixclock;
>> - if (tmp < MIN_CLOCK) {
>> - WRN_MSG("Pixel clock is too low (%d MHz vs %d MHz).\n",
>> - (tmp + 500) / 1000, MIN_CLOCK / 1000);
>> - return 1;
>> - }
>> - if (tmp > MAX_CLOCK) {
>> - WRN_MSG("Pixel clock is too high (%d MHz vs %d MHz).\n",
>> - (tmp + 500) / 1000, MAX_CLOCK / 1000);
>> - return 1;
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -int intelfbhw_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
>> -{
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> - u32 offset, xoffset, yoffset;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_pan_display\n");
>> -#endif
>> -
>> - xoffset = ROUND_DOWN_TO(var->xoffset, 8);
>> - yoffset = var->yoffset;
>> -
>> - if ((xoffset + info->var.xres > info->var.xres_virtual) ||
>> - (yoffset + info->var.yres > info->var.yres_virtual))
>> - return -EINVAL;
>> -
>> - offset = (yoffset * dinfo->pitch) +
>> - (xoffset * info->var.bits_per_pixel) / 8;
>> -
>> - offset += dinfo->fb.offset << 12;
>> -
>> - dinfo->vsync.pan_offset = offset;
>> - if ((var->activate & FB_ACTIVATE_VBL) &&
>> - !intelfbhw_enable_irq(dinfo))
>> - dinfo->vsync.pan_display = 1;
>> - else {
>> - dinfo->vsync.pan_display = 0;
>> - OUTREG(DSPABASE, offset);
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -/* Blank the screen. */
>> -void intelfbhw_do_blank(int blank, struct fb_info *info)
>> -{
>> - struct intelfb_info *dinfo = GET_DINFO(info);
>> - u32 tmp;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_do_blank: blank is %d\n", blank);
>> -#endif
>> -
>> - /* Turn plane A on or off */
>> - tmp = INREG(DSPACNTR);
>> - if (blank)
>> - tmp &= ~DISPPLANE_PLANE_ENABLE;
>> - else
>> - tmp |= DISPPLANE_PLANE_ENABLE;
>> - OUTREG(DSPACNTR, tmp);
>> - /* Flush */
>> - tmp = INREG(DSPABASE);
>> - OUTREG(DSPABASE, tmp);
>> -
>> - /* Turn off/on the HW cursor */
>> -#if VERBOSE > 0
>> - DBG_MSG("cursor_on is %d\n", dinfo->cursor_on);
>> -#endif
>> - if (dinfo->cursor_on) {
>> - if (blank)
>> - intelfbhw_cursor_hide(dinfo);
>> - else
>> - intelfbhw_cursor_show(dinfo);
>> - dinfo->cursor_on = 1;
>> - }
>> - dinfo->cursor_blanked = blank;
>> -
>> - /* Set DPMS level */
>> - tmp = INREG(ADPA) & ~ADPA_DPMS_CONTROL_MASK;
>> - switch (blank) {
>> - case FB_BLANK_UNBLANK:
>> - case FB_BLANK_NORMAL:
>> - tmp |= ADPA_DPMS_D0;
>> - break;
>> - case FB_BLANK_VSYNC_SUSPEND:
>> - tmp |= ADPA_DPMS_D1;
>> - break;
>> - case FB_BLANK_HSYNC_SUSPEND:
>> - tmp |= ADPA_DPMS_D2;
>> - break;
>> - case FB_BLANK_POWERDOWN:
>> - tmp |= ADPA_DPMS_D3;
>> - break;
>> - }
>> - OUTREG(ADPA, tmp);
>> -
>> - return;
>> -}
>> -
>> -
>> -/* Check which pipe is connected to an active display plane. */
>> -int intelfbhw_active_pipe(const struct intelfb_hwstate *hw)
>> -{
>> - int pipe = -1;
>> -
>> - /* keep old default behaviour - prefer PIPE_A */
>> - if (hw->disp_b_ctrl & DISPPLANE_PLANE_ENABLE) {
>> - pipe = (hw->disp_b_ctrl >> DISPPLANE_SEL_PIPE_SHIFT);
>> - pipe &= PIPE_MASK;
>> - if (unlikely(pipe == PIPE_A))
>> - return PIPE_A;
>> - }
>> - if (hw->disp_a_ctrl & DISPPLANE_PLANE_ENABLE) {
>> - pipe = (hw->disp_a_ctrl >> DISPPLANE_SEL_PIPE_SHIFT);
>> - pipe &= PIPE_MASK;
>> - if (likely(pipe == PIPE_A))
>> - return PIPE_A;
>> - }
>> - /* Impossible that no pipe is selected - return PIPE_A */
>> - WARN_ON(pipe == -1);
>> - if (unlikely(pipe == -1))
>> - pipe = PIPE_A;
>> -
>> - return pipe;
>> -}
>> -
>> -void intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
>> - unsigned red, unsigned green, unsigned blue,
>> - unsigned transp)
>> -{
>> - u32 palette_reg = (dinfo->pipe == PIPE_A) ?
>> - PALETTE_A : PALETTE_B;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_setcolreg: %d: (%d, %d, %d)\n",
>> - regno, red, green, blue);
>> -#endif
>> -
>> - OUTREG(palette_reg + (regno << 2),
>> - (red << PALETTE_8_RED_SHIFT) |
>> - (green << PALETTE_8_GREEN_SHIFT) |
>> - (blue << PALETTE_8_BLUE_SHIFT));
>> -}
>> -
>> -
>> -int intelfbhw_read_hw_state(struct intelfb_info *dinfo,
>> - struct intelfb_hwstate *hw, int flag)
>> -{
>> - int i;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_read_hw_state\n");
>> -#endif
>> -
>> - if (!hw || !dinfo)
>> - return -1;
>> -
>> - /* Read in as much of the HW state as possible. */
>> - hw->vga0_divisor = INREG(VGA0_DIVISOR);
>> - hw->vga1_divisor = INREG(VGA1_DIVISOR);
>> - hw->vga_pd = INREG(VGAPD);
>> - hw->dpll_a = INREG(DPLL_A);
>> - hw->dpll_b = INREG(DPLL_B);
>> - hw->fpa0 = INREG(FPA0);
>> - hw->fpa1 = INREG(FPA1);
>> - hw->fpb0 = INREG(FPB0);
>> - hw->fpb1 = INREG(FPB1);
>> -
>> - if (flag == 1)
>> - return flag;
>> -
>> -#if 0
>> - /* This seems to be a problem with the 852GM/855GM */
>> - for (i = 0; i < PALETTE_8_ENTRIES; i++) {
>> - hw->palette_a[i] = INREG(PALETTE_A + (i << 2));
>> - hw->palette_b[i] = INREG(PALETTE_B + (i << 2));
>> - }
>> -#endif
>> -
>> - if (flag == 2)
>> - return flag;
>> -
>> - hw->htotal_a = INREG(HTOTAL_A);
>> - hw->hblank_a = INREG(HBLANK_A);
>> - hw->hsync_a = INREG(HSYNC_A);
>> - hw->vtotal_a = INREG(VTOTAL_A);
>> - hw->vblank_a = INREG(VBLANK_A);
>> - hw->vsync_a = INREG(VSYNC_A);
>> - hw->src_size_a = INREG(SRC_SIZE_A);
>> - hw->bclrpat_a = INREG(BCLRPAT_A);
>> - hw->htotal_b = INREG(HTOTAL_B);
>> - hw->hblank_b = INREG(HBLANK_B);
>> - hw->hsync_b = INREG(HSYNC_B);
>> - hw->vtotal_b = INREG(VTOTAL_B);
>> - hw->vblank_b = INREG(VBLANK_B);
>> - hw->vsync_b = INREG(VSYNC_B);
>> - hw->src_size_b = INREG(SRC_SIZE_B);
>> - hw->bclrpat_b = INREG(BCLRPAT_B);
>> -
>> - if (flag == 3)
>> - return flag;
>> -
>> - hw->adpa = INREG(ADPA);
>> - hw->dvoa = INREG(DVOA);
>> - hw->dvob = INREG(DVOB);
>> - hw->dvoc = INREG(DVOC);
>> - hw->dvoa_srcdim = INREG(DVOA_SRCDIM);
>> - hw->dvob_srcdim = INREG(DVOB_SRCDIM);
>> - hw->dvoc_srcdim = INREG(DVOC_SRCDIM);
>> - hw->lvds = INREG(LVDS);
>> -
>> - if (flag == 4)
>> - return flag;
>> -
>> - hw->pipe_a_conf = INREG(PIPEACONF);
>> - hw->pipe_b_conf = INREG(PIPEBCONF);
>> - hw->disp_arb = INREG(DISPARB);
>> -
>> - if (flag == 5)
>> - return flag;
>> -
>> - hw->cursor_a_control = INREG(CURSOR_A_CONTROL);
>> - hw->cursor_b_control = INREG(CURSOR_B_CONTROL);
>> - hw->cursor_a_base = INREG(CURSOR_A_BASEADDR);
>> - hw->cursor_b_base = INREG(CURSOR_B_BASEADDR);
>> -
>> - if (flag == 6)
>> - return flag;
>> -
>> - for (i = 0; i < 4; i++) {
>> - hw->cursor_a_palette[i] = INREG(CURSOR_A_PALETTE0 + (i << 2));
>> - hw->cursor_b_palette[i] = INREG(CURSOR_B_PALETTE0 + (i << 2));
>> - }
>> -
>> - if (flag == 7)
>> - return flag;
>> -
>> - hw->cursor_size = INREG(CURSOR_SIZE);
>> -
>> - if (flag == 8)
>> - return flag;
>> -
>> - hw->disp_a_ctrl = INREG(DSPACNTR);
>> - hw->disp_b_ctrl = INREG(DSPBCNTR);
>> - hw->disp_a_base = INREG(DSPABASE);
>> - hw->disp_b_base = INREG(DSPBBASE);
>> - hw->disp_a_stride = INREG(DSPASTRIDE);
>> - hw->disp_b_stride = INREG(DSPBSTRIDE);
>> -
>> - if (flag == 9)
>> - return flag;
>> -
>> - hw->vgacntrl = INREG(VGACNTRL);
>> -
>> - if (flag == 10)
>> - return flag;
>> -
>> - hw->add_id = INREG(ADD_ID);
>> -
>> - if (flag == 11)
>> - return flag;
>> -
>> - for (i = 0; i < 7; i++) {
>> - hw->swf0x[i] = INREG(SWF00 + (i << 2));
>> - hw->swf1x[i] = INREG(SWF10 + (i << 2));
>> - if (i < 3)
>> - hw->swf3x[i] = INREG(SWF30 + (i << 2));
>> - }
>> -
>> - for (i = 0; i < 8; i++)
>> - hw->fence[i] = INREG(FENCE + (i << 2));
>> -
>> - hw->instpm = INREG(INSTPM);
>> - hw->mem_mode = INREG(MEM_MODE);
>> - hw->fw_blc_0 = INREG(FW_BLC_0);
>> - hw->fw_blc_1 = INREG(FW_BLC_1);
>> -
>> - hw->hwstam = INREG16(HWSTAM);
>> - hw->ier = INREG16(IER);
>> - hw->iir = INREG16(IIR);
>> - hw->imr = INREG16(IMR);
>> -
>> - return 0;
>> -}
>> -
>> -
>> -static int calc_vclock3(int index, int m, int n, int p)
>> -{
>> - if (p == 0 || n == 0)
>> - return 0;
>> - return plls[index].ref_clk * m / n / p;
>> -}
>> -
>> -static int calc_vclock(int index, int m1, int m2, int n, int p1, int p2,
>> - int lvds)
>> -{
>> - struct pll_min_max *pll = &plls[index];
>> - u32 m, vco, p;
>> -
>> - m = (5 * (m1 + 2)) + (m2 + 2);
>> - n += 2;
>> - vco = pll->ref_clk * m / n;
>> -
>> - if (index == PLLS_I8xx)
>> - p = ((p1 + 2) * (1 << (p2 + 1)));
>> - else
>> - p = ((p1) * (p2 ? 5 : 10));
>> - return vco / p;
>> -}
>> -
>> -#if REGDUMP
>> -static void intelfbhw_get_p1p2(struct intelfb_info *dinfo, int dpll,
>> - int *o_p1, int *o_p2)
>> -{
>> - int p1, p2;
>> -
>> - if (IS_I9XX(dinfo)) {
>> - if (dpll & DPLL_P1_FORCE_DIV2)
>> - p1 = 1;
>> - else
>> - p1 = (dpll >> DPLL_P1_SHIFT) & 0xff;
>> -
>> - p1 = ffs(p1);
>> -
>> - p2 = (dpll >> DPLL_I9XX_P2_SHIFT) & DPLL_P2_MASK;
>> - } else {
>> - if (dpll & DPLL_P1_FORCE_DIV2)
>> - p1 = 0;
>> - else
>> - p1 = (dpll >> DPLL_P1_SHIFT) & DPLL_P1_MASK;
>> - p2 = (dpll >> DPLL_P2_SHIFT) & DPLL_P2_MASK;
>> - }
>> -
>> - *o_p1 = p1;
>> - *o_p2 = p2;
>> -}
>> -#endif
>> -
>> -
>> -void intelfbhw_print_hw_state(struct intelfb_info *dinfo,
>> - struct intelfb_hwstate *hw)
>> -{
>> -#if REGDUMP
>> - int i, m1, m2, n, p1, p2;
>> - int index = dinfo->pll_index;
>> - DBG_MSG("intelfbhw_print_hw_state\n");
>> -
>> - if (!hw)
>> - return;
>> - /* Read in as much of the HW state as possible. */
>> - printk("hw state dump start\n");
>> - printk(" VGA0_DIVISOR: 0x%08x\n", hw->vga0_divisor);
>> - printk(" VGA1_DIVISOR: 0x%08x\n", hw->vga1_divisor);
>> - printk(" VGAPD: 0x%08x\n", hw->vga_pd);
>> - n = (hw->vga0_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> - m1 = (hw->vga0_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> - m2 = (hw->vga0_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> -
>> - intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
>> -
>> - printk(" VGA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
>> - m1, m2, n, p1, p2);
>> - printk(" VGA0: clock is %d\n",
>> - calc_vclock(index, m1, m2, n, p1, p2, 0));
>> -
>> - n = (hw->vga1_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> - m1 = (hw->vga1_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> - m2 = (hw->vga1_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> -
>> - intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
>> - printk(" VGA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
>> - m1, m2, n, p1, p2);
>> - printk(" VGA1: clock is %d\n",
>> - calc_vclock(index, m1, m2, n, p1, p2, 0));
>> -
>> - printk(" DPLL_A: 0x%08x\n", hw->dpll_a);
>> - printk(" DPLL_B: 0x%08x\n", hw->dpll_b);
>> - printk(" FPA0: 0x%08x\n", hw->fpa0);
>> - printk(" FPA1: 0x%08x\n", hw->fpa1);
>> - printk(" FPB0: 0x%08x\n", hw->fpb0);
>> - printk(" FPB1: 0x%08x\n", hw->fpb1);
>> -
>> - n = (hw->fpa0 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> - m1 = (hw->fpa0 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> - m2 = (hw->fpa0 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> -
>> - intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
>> -
>> - printk(" PLLA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
>> - m1, m2, n, p1, p2);
>> - printk(" PLLA0: clock is %d\n",
>> - calc_vclock(index, m1, m2, n, p1, p2, 0));
>> -
>> - n = (hw->fpa1 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> - m1 = (hw->fpa1 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> - m2 = (hw->fpa1 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
>> -
>> - intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
>> -
>> - printk(" PLLA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
>> - m1, m2, n, p1, p2);
>> - printk(" PLLA1: clock is %d\n",
>> - calc_vclock(index, m1, m2, n, p1, p2, 0));
>> -
>> -#if 0
>> - printk(" PALETTE_A:\n");
>> - for (i = 0; i < PALETTE_8_ENTRIES)
>> - printk(" %3d: 0x%08x\n", i, hw->palette_a[i]);
>> - printk(" PALETTE_B:\n");
>> - for (i = 0; i < PALETTE_8_ENTRIES)
>> - printk(" %3d: 0x%08x\n", i, hw->palette_b[i]);
>> -#endif
>> -
>> - printk(" HTOTAL_A: 0x%08x\n", hw->htotal_a);
>> - printk(" HBLANK_A: 0x%08x\n", hw->hblank_a);
>> - printk(" HSYNC_A: 0x%08x\n", hw->hsync_a);
>> - printk(" VTOTAL_A: 0x%08x\n", hw->vtotal_a);
>> - printk(" VBLANK_A: 0x%08x\n", hw->vblank_a);
>> - printk(" VSYNC_A: 0x%08x\n", hw->vsync_a);
>> - printk(" SRC_SIZE_A: 0x%08x\n", hw->src_size_a);
>> - printk(" BCLRPAT_A: 0x%08x\n", hw->bclrpat_a);
>> - printk(" HTOTAL_B: 0x%08x\n", hw->htotal_b);
>> - printk(" HBLANK_B: 0x%08x\n", hw->hblank_b);
>> - printk(" HSYNC_B: 0x%08x\n", hw->hsync_b);
>> - printk(" VTOTAL_B: 0x%08x\n", hw->vtotal_b);
>> - printk(" VBLANK_B: 0x%08x\n", hw->vblank_b);
>> - printk(" VSYNC_B: 0x%08x\n", hw->vsync_b);
>> - printk(" SRC_SIZE_B: 0x%08x\n", hw->src_size_b);
>> - printk(" BCLRPAT_B: 0x%08x\n", hw->bclrpat_b);
>> -
>> - printk(" ADPA: 0x%08x\n", hw->adpa);
>> - printk(" DVOA: 0x%08x\n", hw->dvoa);
>> - printk(" DVOB: 0x%08x\n", hw->dvob);
>> - printk(" DVOC: 0x%08x\n", hw->dvoc);
>> - printk(" DVOA_SRCDIM: 0x%08x\n", hw->dvoa_srcdim);
>> - printk(" DVOB_SRCDIM: 0x%08x\n", hw->dvob_srcdim);
>> - printk(" DVOC_SRCDIM: 0x%08x\n", hw->dvoc_srcdim);
>> - printk(" LVDS: 0x%08x\n", hw->lvds);
>> -
>> - printk(" PIPEACONF: 0x%08x\n", hw->pipe_a_conf);
>> - printk(" PIPEBCONF: 0x%08x\n", hw->pipe_b_conf);
>> - printk(" DISPARB: 0x%08x\n", hw->disp_arb);
>> -
>> - printk(" CURSOR_A_CONTROL: 0x%08x\n", hw->cursor_a_control);
>> - printk(" CURSOR_B_CONTROL: 0x%08x\n", hw->cursor_b_control);
>> - printk(" CURSOR_A_BASEADDR: 0x%08x\n", hw->cursor_a_base);
>> - printk(" CURSOR_B_BASEADDR: 0x%08x\n", hw->cursor_b_base);
>> -
>> - printk(" CURSOR_A_PALETTE: ");
>> - for (i = 0; i < 4; i++) {
>> - printk("0x%08x", hw->cursor_a_palette[i]);
>> - if (i < 3)
>> - printk(", ");
>> - }
>> - printk("\n");
>> - printk(" CURSOR_B_PALETTE: ");
>> - for (i = 0; i < 4; i++) {
>> - printk("0x%08x", hw->cursor_b_palette[i]);
>> - if (i < 3)
>> - printk(", ");
>> - }
>> - printk("\n");
>> -
>> - printk(" CURSOR_SIZE: 0x%08x\n", hw->cursor_size);
>> -
>> - printk(" DSPACNTR: 0x%08x\n", hw->disp_a_ctrl);
>> - printk(" DSPBCNTR: 0x%08x\n", hw->disp_b_ctrl);
>> - printk(" DSPABASE: 0x%08x\n", hw->disp_a_base);
>> - printk(" DSPBBASE: 0x%08x\n", hw->disp_b_base);
>> - printk(" DSPASTRIDE: 0x%08x\n", hw->disp_a_stride);
>> - printk(" DSPBSTRIDE: 0x%08x\n", hw->disp_b_stride);
>> -
>> - printk(" VGACNTRL: 0x%08x\n", hw->vgacntrl);
>> - printk(" ADD_ID: 0x%08x\n", hw->add_id);
>> -
>> - for (i = 0; i < 7; i++) {
>> - printk(" SWF0%d 0x%08x\n", i,
>> - hw->swf0x[i]);
>> - }
>> - for (i = 0; i < 7; i++) {
>> - printk(" SWF1%d 0x%08x\n", i,
>> - hw->swf1x[i]);
>> - }
>> - for (i = 0; i < 3; i++) {
>> - printk(" SWF3%d 0x%08x\n", i,
>> - hw->swf3x[i]);
>> - }
>> - for (i = 0; i < 8; i++)
>> - printk(" FENCE%d 0x%08x\n", i,
>> - hw->fence[i]);
>> -
>> - printk(" INSTPM 0x%08x\n", hw->instpm);
>> - printk(" MEM_MODE 0x%08x\n", hw->mem_mode);
>> - printk(" FW_BLC_0 0x%08x\n", hw->fw_blc_0);
>> - printk(" FW_BLC_1 0x%08x\n", hw->fw_blc_1);
>> -
>> - printk(" HWSTAM 0x%04x\n", hw->hwstam);
>> - printk(" IER 0x%04x\n", hw->ier);
>> - printk(" IIR 0x%04x\n", hw->iir);
>> - printk(" IMR 0x%04x\n", hw->imr);
>> - printk("hw state dump end\n");
>> -#endif
>> -}
>> -
>> -
>> -
>> -/* Split the M parameter into M1 and M2. */
>> -static int splitm(int index, unsigned int m, unsigned int *retm1,
>> - unsigned int *retm2)
>> -{
>> - int m1, m2;
>> - int testm;
>> - struct pll_min_max *pll = &plls[index];
>> -
>> - /* no point optimising too much - brute force m */
>> - for (m1 = pll->min_m1; m1 < pll->max_m1 + 1; m1++) {
>> - for (m2 = pll->min_m2; m2 < pll->max_m2 + 1; m2++) {
>> - testm = (5 * (m1 + 2)) + (m2 + 2);
>> - if (testm == m) {
>> - *retm1 = (unsigned int)m1;
>> - *retm2 = (unsigned int)m2;
>> - return 0;
>> - }
>> - }
>> - }
>> - return 1;
>> -}
>> -
>> -/* Split the P parameter into P1 and P2. */
>> -static int splitp(int index, unsigned int p, unsigned int *retp1,
>> - unsigned int *retp2)
>> -{
>> - int p1, p2;
>> - struct pll_min_max *pll = &plls[index];
>> -
>> - if (index == PLLS_I9xx) {
>> - p2 = (p % 10) ? 1 : 0;
>> -
>> - p1 = p / (p2 ? 5 : 10);
>> -
>> - *retp1 = (unsigned int)p1;
>> - *retp2 = (unsigned int)p2;
>> - return 0;
>> - }
>> -
>> - if (p % 4 == 0)
>> - p2 = 1;
>> - else
>> - p2 = 0;
>> - p1 = (p / (1 << (p2 + 1))) - 2;
>> - if (p % 4 == 0 && p1 < pll->min_p1) {
>> - p2 = 0;
>> - p1 = (p / (1 << (p2 + 1))) - 2;
>> - }
>> - if (p1 < pll->min_p1 || p1 > pll->max_p1 ||
>> - (p1 + 2) * (1 << (p2 + 1)) != p) {
>> - return 1;
>> - } else {
>> - *retp1 = (unsigned int)p1;
>> - *retp2 = (unsigned int)p2;
>> - return 0;
>> - }
>> -}
>> -
>> -static int calc_pll_params(int index, int clock, u32 *retm1, u32 *retm2,
>> - u32 *retn, u32 *retp1, u32 *retp2, u32 *retclock)
>> -{
>> - u32 m1, m2, n, p1, p2, n1, testm;
>> - u32 f_vco, p, p_best = 0, m, f_out = 0;
>> - u32 err_best = 10000000;
>> - u32 n_best = 0, m_best = 0, f_err;
>> - u32 p_min, p_max, p_inc, div_max;
>> - struct pll_min_max *pll = &plls[index];
>> -
>> - DBG_MSG("Clock is %d\n", clock);
>> -
>> - div_max = pll->max_vco / clock;
>> -
>> - p_inc = (clock <= pll->p_transition_clk) ? pll->p_inc_lo : pll->p_inc_hi;
>> - p_min = p_inc;
>> - p_max = ROUND_DOWN_TO(div_max, p_inc);
>> - if (p_min < pll->min_p)
>> - p_min = pll->min_p;
>> - if (p_max > pll->max_p)
>> - p_max = pll->max_p;
>> -
>> - DBG_MSG("p range is %d-%d (%d)\n", p_min, p_max, p_inc);
>> -
>> - p = p_min;
>> - do {
>> - if (splitp(index, p, &p1, &p2)) {
>> - WRN_MSG("cannot split p = %d\n", p);
>> - p += p_inc;
>> - continue;
>> - }
>> - n = pll->min_n;
>> - f_vco = clock * p;
>> -
>> - do {
>> - m = ROUND_UP_TO(f_vco * n, pll->ref_clk) / pll->ref_clk;
>> - if (m < pll->min_m)
>> - m = pll->min_m + 1;
>> - if (m > pll->max_m)
>> - m = pll->max_m - 1;
>> - for (testm = m - 1; testm <= m; testm++) {
>> - f_out = calc_vclock3(index, testm, n, p);
>> - if (splitm(index, testm, &m1, &m2)) {
>> - WRN_MSG("cannot split m = %d\n",
>> - testm);
>> - continue;
>> - }
>> - if (clock > f_out)
>> - f_err = clock - f_out;
>> - else/* slightly bias the error for bigger clocks */
>> - f_err = f_out - clock + 1;
>> -
>> - if (f_err < err_best) {
>> - m_best = testm;
>> - n_best = n;
>> - p_best = p;
>> - err_best = f_err;
>> - }
>> - }
>> - n++;
>> - } while ((n <= pll->max_n) && (f_out >= clock));
>> - p += p_inc;
>> - } while ((p <= p_max));
>> -
>> - if (!m_best) {
>> - WRN_MSG("cannot find parameters for clock %d\n", clock);
>> - return 1;
>> - }
>> - m = m_best;
>> - n = n_best;
>> - p = p_best;
>> - splitm(index, m, &m1, &m2);
>> - splitp(index, p, &p1, &p2);
>> - n1 = n - 2;
>> -
>> - DBG_MSG("m, n, p: %d (%d,%d), %d (%d), %d (%d,%d), "
>> - "f: %d (%d), VCO: %d\n",
>> - m, m1, m2, n, n1, p, p1, p2,
>> - calc_vclock3(index, m, n, p),
>> - calc_vclock(index, m1, m2, n1, p1, p2, 0),
>> - calc_vclock3(index, m, n, p) * p);
>> - *retm1 = m1;
>> - *retm2 = m2;
>> - *retn = n1;
>> - *retp1 = p1;
>> - *retp2 = p2;
>> - *retclock = calc_vclock(index, m1, m2, n1, p1, p2, 0);
>> -
>> - return 0;
>> -}
>> -
>> -static __inline__ int check_overflow(u32 value, u32 limit,
>> - const char *description)
>> -{
>> - if (value > limit) {
>> - WRN_MSG("%s value %d exceeds limit %d\n",
>> - description, value, limit);
>> - return 1;
>> - }
>> - return 0;
>> -}
>> -
>> -/* It is assumed that hw is filled in with the initial state information. */
>> -int intelfbhw_mode_to_hw(struct intelfb_info *dinfo,
>> - struct intelfb_hwstate *hw,
>> - struct fb_var_screeninfo *var)
>> -{
>> - int pipe = intelfbhw_active_pipe(hw);
>> - u32 *dpll, *fp0, *fp1;
>> - u32 m1, m2, n, p1, p2, clock_target, clock;
>> - u32 hsync_start, hsync_end, hblank_start, hblank_end, htotal, hactive;
>> - u32 vsync_start, vsync_end, vblank_start, vblank_end, vtotal, vactive;
>> - u32 vsync_pol, hsync_pol;
>> - u32 *vs, *vb, *vt, *hs, *hb, *ht, *ss, *pipe_conf;
>> - u32 stride_alignment;
>> -
>> - DBG_MSG("intelfbhw_mode_to_hw\n");
>> -
>> - /* Disable VGA */
>> - hw->vgacntrl |= VGA_DISABLE;
>> -
>> - /* Set which pipe's registers will be set. */
>> - if (pipe == PIPE_B) {
>> - dpll = &hw->dpll_b;
>> - fp0 = &hw->fpb0;
>> - fp1 = &hw->fpb1;
>> - hs = &hw->hsync_b;
>> - hb = &hw->hblank_b;
>> - ht = &hw->htotal_b;
>> - vs = &hw->vsync_b;
>> - vb = &hw->vblank_b;
>> - vt = &hw->vtotal_b;
>> - ss = &hw->src_size_b;
>> - pipe_conf = &hw->pipe_b_conf;
>> - } else {
>> - dpll = &hw->dpll_a;
>> - fp0 = &hw->fpa0;
>> - fp1 = &hw->fpa1;
>> - hs = &hw->hsync_a;
>> - hb = &hw->hblank_a;
>> - ht = &hw->htotal_a;
>> - vs = &hw->vsync_a;
>> - vb = &hw->vblank_a;
>> - vt = &hw->vtotal_a;
>> - ss = &hw->src_size_a;
>> - pipe_conf = &hw->pipe_a_conf;
>> - }
>> -
>> - /* Use ADPA register for sync control. */
>> - hw->adpa &= ~ADPA_USE_VGA_HVPOLARITY;
>> -
>> - /* sync polarity */
>> - hsync_pol = (var->sync & FB_SYNC_HOR_HIGH_ACT) ?
>> - ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
>> - vsync_pol = (var->sync & FB_SYNC_VERT_HIGH_ACT) ?
>> - ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
>> - hw->adpa &= ~((ADPA_SYNC_ACTIVE_MASK << ADPA_VSYNC_ACTIVE_SHIFT) |
>> - (ADPA_SYNC_ACTIVE_MASK << ADPA_HSYNC_ACTIVE_SHIFT));
>> - hw->adpa |= (hsync_pol << ADPA_HSYNC_ACTIVE_SHIFT) |
>> - (vsync_pol << ADPA_VSYNC_ACTIVE_SHIFT);
>> -
>> - /* Connect correct pipe to the analog port DAC */
>> - hw->adpa &= ~(PIPE_MASK << ADPA_PIPE_SELECT_SHIFT);
>> - hw->adpa |= (pipe << ADPA_PIPE_SELECT_SHIFT);
>> -
>> - /* Set DPMS state to D0 (on) */
>> - hw->adpa &= ~ADPA_DPMS_CONTROL_MASK;
>> - hw->adpa |= ADPA_DPMS_D0;
>> -
>> - hw->adpa |= ADPA_DAC_ENABLE;
>> -
>> - *dpll |= (DPLL_VCO_ENABLE | DPLL_VGA_MODE_DISABLE);
>> - *dpll &= ~(DPLL_RATE_SELECT_MASK | DPLL_REFERENCE_SELECT_MASK);
>> - *dpll |= (DPLL_REFERENCE_DEFAULT | DPLL_RATE_SELECT_FP0);
>> -
>> - /* Desired clock in kHz */
>> - clock_target = 1000000000 / var->pixclock;
>> -
>> - if (calc_pll_params(dinfo->pll_index, clock_target, &m1, &m2,
>> - &n, &p1, &p2, &clock)) {
>> - WRN_MSG("calc_pll_params failed\n");
>> - return 1;
>> - }
>> -
>> - /* Check for overflow. */
>> - if (check_overflow(p1, DPLL_P1_MASK, "PLL P1 parameter"))
>> - return 1;
>> - if (check_overflow(p2, DPLL_P2_MASK, "PLL P2 parameter"))
>> - return 1;
>> - if (check_overflow(m1, FP_DIVISOR_MASK, "PLL M1 parameter"))
>> - return 1;
>> - if (check_overflow(m2, FP_DIVISOR_MASK, "PLL M2 parameter"))
>> - return 1;
>> - if (check_overflow(n, FP_DIVISOR_MASK, "PLL N parameter"))
>> - return 1;
>> -
>> - *dpll &= ~DPLL_P1_FORCE_DIV2;
>> - *dpll &= ~((DPLL_P2_MASK << DPLL_P2_SHIFT) |
>> - (DPLL_P1_MASK << DPLL_P1_SHIFT));
>> -
>> - if (IS_I9XX(dinfo)) {
>> - *dpll |= (p2 << DPLL_I9XX_P2_SHIFT);
>> - *dpll |= (1 << (p1 - 1)) << DPLL_P1_SHIFT;
>> - } else
>> - *dpll |= (p2 << DPLL_P2_SHIFT) | (p1 << DPLL_P1_SHIFT);
>> -
>> - *fp0 = (n << FP_N_DIVISOR_SHIFT) |
>> - (m1 << FP_M1_DIVISOR_SHIFT) |
>> - (m2 << FP_M2_DIVISOR_SHIFT);
>> - *fp1 = *fp0;
>> -
>> - hw->dvob &= ~PORT_ENABLE;
>> - hw->dvoc &= ~PORT_ENABLE;
>> -
>> - /* Use display plane A. */
>> - hw->disp_a_ctrl |= DISPPLANE_PLANE_ENABLE;
>> - hw->disp_a_ctrl &= ~DISPPLANE_GAMMA_ENABLE;
>> - hw->disp_a_ctrl &= ~DISPPLANE_PIXFORMAT_MASK;
>> - switch (intelfb_var_to_depth(var)) {
>> - case 8:
>> - hw->disp_a_ctrl |= DISPPLANE_8BPP | DISPPLANE_GAMMA_ENABLE;
>> - break;
>> - case 15:
>> - hw->disp_a_ctrl |= DISPPLANE_15_16BPP;
>> - break;
>> - case 16:
>> - hw->disp_a_ctrl |= DISPPLANE_16BPP;
>> - break;
>> - case 24:
>> - hw->disp_a_ctrl |= DISPPLANE_32BPP_NO_ALPHA;
>> - break;
>> - }
>> - hw->disp_a_ctrl &= ~(PIPE_MASK << DISPPLANE_SEL_PIPE_SHIFT);
>> - hw->disp_a_ctrl |= (pipe << DISPPLANE_SEL_PIPE_SHIFT);
>> -
>> - /* Set CRTC registers. */
>> - hactive = var->xres;
>> - hsync_start = hactive + var->right_margin;
>> - hsync_end = hsync_start + var->hsync_len;
>> - htotal = hsync_end + var->left_margin;
>> - hblank_start = hactive;
>> - hblank_end = htotal;
>> -
>> - DBG_MSG("H: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
>> - hactive, hsync_start, hsync_end, htotal, hblank_start,
>> - hblank_end);
>> -
>> - vactive = var->yres;
>> - if (var->vmode & FB_VMODE_INTERLACED)
>> - vactive--; /* the chip adds 2 halflines automatically */
>> - vsync_start = vactive + var->lower_margin;
>> - vsync_end = vsync_start + var->vsync_len;
>> - vtotal = vsync_end + var->upper_margin;
>> - vblank_start = vactive;
>> - vblank_end = vsync_end + 1;
>> -
>> - DBG_MSG("V: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
>> - vactive, vsync_start, vsync_end, vtotal, vblank_start,
>> - vblank_end);
>> -
>> - /* Adjust for register values, and check for overflow. */
>> - hactive--;
>> - if (check_overflow(hactive, HACTIVE_MASK, "CRTC hactive"))
>> - return 1;
>> - hsync_start--;
>> - if (check_overflow(hsync_start, HSYNCSTART_MASK, "CRTC hsync_start"))
>> - return 1;
>> - hsync_end--;
>> - if (check_overflow(hsync_end, HSYNCEND_MASK, "CRTC hsync_end"))
>> - return 1;
>> - htotal--;
>> - if (check_overflow(htotal, HTOTAL_MASK, "CRTC htotal"))
>> - return 1;
>> - hblank_start--;
>> - if (check_overflow(hblank_start, HBLANKSTART_MASK, "CRTC hblank_start"))
>> - return 1;
>> - hblank_end--;
>> - if (check_overflow(hblank_end, HBLANKEND_MASK, "CRTC hblank_end"))
>> - return 1;
>> -
>> - vactive--;
>> - if (check_overflow(vactive, VACTIVE_MASK, "CRTC vactive"))
>> - return 1;
>> - vsync_start--;
>> - if (check_overflow(vsync_start, VSYNCSTART_MASK, "CRTC vsync_start"))
>> - return 1;
>> - vsync_end--;
>> - if (check_overflow(vsync_end, VSYNCEND_MASK, "CRTC vsync_end"))
>> - return 1;
>> - vtotal--;
>> - if (check_overflow(vtotal, VTOTAL_MASK, "CRTC vtotal"))
>> - return 1;
>> - vblank_start--;
>> - if (check_overflow(vblank_start, VBLANKSTART_MASK, "CRTC vblank_start"))
>> - return 1;
>> - vblank_end--;
>> - if (check_overflow(vblank_end, VBLANKEND_MASK, "CRTC vblank_end"))
>> - return 1;
>> -
>> - *ht = (htotal << HTOTAL_SHIFT) | (hactive << HACTIVE_SHIFT);
>> - *hb = (hblank_start << HBLANKSTART_SHIFT) |
>> - (hblank_end << HSYNCEND_SHIFT);
>> - *hs = (hsync_start << HSYNCSTART_SHIFT) | (hsync_end << HSYNCEND_SHIFT);
>> -
>> - *vt = (vtotal << VTOTAL_SHIFT) | (vactive << VACTIVE_SHIFT);
>> - *vb = (vblank_start << VBLANKSTART_SHIFT) |
>> - (vblank_end << VSYNCEND_SHIFT);
>> - *vs = (vsync_start << VSYNCSTART_SHIFT) | (vsync_end << VSYNCEND_SHIFT);
>> - *ss = (hactive << SRC_SIZE_HORIZ_SHIFT) |
>> - (vactive << SRC_SIZE_VERT_SHIFT);
>> -
>> - hw->disp_a_stride = dinfo->pitch;
>> - DBG_MSG("pitch is %d\n", hw->disp_a_stride);
>> -
>> - hw->disp_a_base = hw->disp_a_stride * var->yoffset +
>> - var->xoffset * var->bits_per_pixel / 8;
>> -
>> - hw->disp_a_base += dinfo->fb.offset << 12;
>> -
>> - /* Check stride alignment. */
>> - stride_alignment = IS_I9XX(dinfo) ? STRIDE_ALIGNMENT_I9XX :
>> - STRIDE_ALIGNMENT;
>> - if (hw->disp_a_stride % stride_alignment != 0) {
>> - WRN_MSG("display stride %d has bad alignment %d\n",
>> - hw->disp_a_stride, stride_alignment);
>> - return 1;
>> - }
>> -
>> - /* Set the palette to 8-bit mode. */
>> - *pipe_conf &= ~PIPECONF_GAMMA;
>> -
>> - if (var->vmode & FB_VMODE_INTERLACED)
>> - *pipe_conf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
>> - else
>> - *pipe_conf &= ~PIPECONF_INTERLACE_MASK;
>> -
>> - return 0;
>> -}
>> -
>> -/* Program a (non-VGA) video mode. */
>> -int intelfbhw_program_mode(struct intelfb_info *dinfo,
>> - const struct intelfb_hwstate *hw, int blank)
>> -{
>> - u32 tmp;
>> - const u32 *dpll, *fp0, *fp1, *pipe_conf;
>> - const u32 *hs, *ht, *hb, *vs, *vt, *vb, *ss;
>> - u32 dpll_reg, fp0_reg, fp1_reg, pipe_conf_reg, pipe_stat_reg;
>> - u32 hsync_reg, htotal_reg, hblank_reg;
>> - u32 vsync_reg, vtotal_reg, vblank_reg;
>> - u32 src_size_reg;
>> - u32 count, tmp_val[3];
>> -
>> - /* Assume single pipe */
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_program_mode\n");
>> -#endif
>> -
>> - /* Disable VGA */
>> - tmp = INREG(VGACNTRL);
>> - tmp |= VGA_DISABLE;
>> - OUTREG(VGACNTRL, tmp);
>> -
>> - dinfo->pipe = intelfbhw_active_pipe(hw);
>> -
>> - if (dinfo->pipe == PIPE_B) {
>> - dpll = &hw->dpll_b;
>> - fp0 = &hw->fpb0;
>> - fp1 = &hw->fpb1;
>> - pipe_conf = &hw->pipe_b_conf;
>> - hs = &hw->hsync_b;
>> - hb = &hw->hblank_b;
>> - ht = &hw->htotal_b;
>> - vs = &hw->vsync_b;
>> - vb = &hw->vblank_b;
>> - vt = &hw->vtotal_b;
>> - ss = &hw->src_size_b;
>> - dpll_reg = DPLL_B;
>> - fp0_reg = FPB0;
>> - fp1_reg = FPB1;
>> - pipe_conf_reg = PIPEBCONF;
>> - pipe_stat_reg = PIPEBSTAT;
>> - hsync_reg = HSYNC_B;
>> - htotal_reg = HTOTAL_B;
>> - hblank_reg = HBLANK_B;
>> - vsync_reg = VSYNC_B;
>> - vtotal_reg = VTOTAL_B;
>> - vblank_reg = VBLANK_B;
>> - src_size_reg = SRC_SIZE_B;
>> - } else {
>> - dpll = &hw->dpll_a;
>> - fp0 = &hw->fpa0;
>> - fp1 = &hw->fpa1;
>> - pipe_conf = &hw->pipe_a_conf;
>> - hs = &hw->hsync_a;
>> - hb = &hw->hblank_a;
>> - ht = &hw->htotal_a;
>> - vs = &hw->vsync_a;
>> - vb = &hw->vblank_a;
>> - vt = &hw->vtotal_a;
>> - ss = &hw->src_size_a;
>> - dpll_reg = DPLL_A;
>> - fp0_reg = FPA0;
>> - fp1_reg = FPA1;
>> - pipe_conf_reg = PIPEACONF;
>> - pipe_stat_reg = PIPEASTAT;
>> - hsync_reg = HSYNC_A;
>> - htotal_reg = HTOTAL_A;
>> - hblank_reg = HBLANK_A;
>> - vsync_reg = VSYNC_A;
>> - vtotal_reg = VTOTAL_A;
>> - vblank_reg = VBLANK_A;
>> - src_size_reg = SRC_SIZE_A;
>> - }
>> -
>> - /* turn off pipe */
>> - tmp = INREG(pipe_conf_reg);
>> - tmp &= ~PIPECONF_ENABLE;
>> - OUTREG(pipe_conf_reg, tmp);
>> -
>> - count = 0;
>> - do {
>> - tmp_val[count % 3] = INREG(PIPEA_DSL);
>> - if ((tmp_val[0] == tmp_val[1]) && (tmp_val[1] == tmp_val[2]))
>> - break;
>> - count++;
>> - udelay(1);
>> - if (count % 200 == 0) {
>> - tmp = INREG(pipe_conf_reg);
>> - tmp &= ~PIPECONF_ENABLE;
>> - OUTREG(pipe_conf_reg, tmp);
>> - }
>> - } while (count < 2000);
>> -
>> - OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
>> -
>> - /* Disable planes A and B. */
>> - tmp = INREG(DSPACNTR);
>> - tmp &= ~DISPPLANE_PLANE_ENABLE;
>> - OUTREG(DSPACNTR, tmp);
>> - tmp = INREG(DSPBCNTR);
>> - tmp &= ~DISPPLANE_PLANE_ENABLE;
>> - OUTREG(DSPBCNTR, tmp);
>> -
>> - /* Wait for vblank. For now, just wait for a 50Hz cycle (20ms)) */
>> - mdelay(20);
>> -
>> - OUTREG(DVOB, INREG(DVOB) & ~PORT_ENABLE);
>> - OUTREG(DVOC, INREG(DVOC) & ~PORT_ENABLE);
>> - OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
>> -
>> - /* Disable Sync */
>> - tmp = INREG(ADPA);
>> - tmp &= ~ADPA_DPMS_CONTROL_MASK;
>> - tmp |= ADPA_DPMS_D3;
>> - OUTREG(ADPA, tmp);
>> -
>> - /* do some funky magic - xyzzy */
>> - OUTREG(0x61204, 0xabcd0000);
>> -
>> - /* turn off PLL */
>> - tmp = INREG(dpll_reg);
>> - tmp &= ~DPLL_VCO_ENABLE;
>> - OUTREG(dpll_reg, tmp);
>> -
>> - /* Set PLL parameters */
>> - OUTREG(fp0_reg, *fp0);
>> - OUTREG(fp1_reg, *fp1);
>> -
>> - /* Enable PLL */
>> - OUTREG(dpll_reg, *dpll);
>> -
>> - /* Set DVOs B/C */
>> - OUTREG(DVOB, hw->dvob);
>> - OUTREG(DVOC, hw->dvoc);
>> -
>> - /* undo funky magic */
>> - OUTREG(0x61204, 0x00000000);
>> -
>> - /* Set ADPA */
>> - OUTREG(ADPA, INREG(ADPA) | ADPA_DAC_ENABLE);
>> - OUTREG(ADPA, (hw->adpa & ~(ADPA_DPMS_CONTROL_MASK)) | ADPA_DPMS_D3);
>> -
>> - /* Set pipe parameters */
>> - OUTREG(hsync_reg, *hs);
>> - OUTREG(hblank_reg, *hb);
>> - OUTREG(htotal_reg, *ht);
>> - OUTREG(vsync_reg, *vs);
>> - OUTREG(vblank_reg, *vb);
>> - OUTREG(vtotal_reg, *vt);
>> - OUTREG(src_size_reg, *ss);
>> -
>> - switch (dinfo->info->var.vmode & (FB_VMODE_INTERLACED |
>> - FB_VMODE_ODD_FLD_FIRST)) {
>> - case FB_VMODE_INTERLACED | FB_VMODE_ODD_FLD_FIRST:
>> - OUTREG(pipe_stat_reg, 0xFFFF | PIPESTAT_FLD_EVT_ODD_EN);
>> - break;
>> - case FB_VMODE_INTERLACED: /* even lines first */
>> - OUTREG(pipe_stat_reg, 0xFFFF | PIPESTAT_FLD_EVT_EVEN_EN);
>> - break;
>> - default: /* non-interlaced */
>> - OUTREG(pipe_stat_reg, 0xFFFF); /* clear all status bits only */
>> - }
>> - /* Enable pipe */
>> - OUTREG(pipe_conf_reg, *pipe_conf | PIPECONF_ENABLE);
>> -
>> - /* Enable sync */
>> - tmp = INREG(ADPA);
>> - tmp &= ~ADPA_DPMS_CONTROL_MASK;
>> - tmp |= ADPA_DPMS_D0;
>> - OUTREG(ADPA, tmp);
>> -
>> - /* setup display plane */
>> - if (dinfo->pdev->device == PCI_DEVICE_ID_INTEL_830M) {
>> - /*
>> - * i830M errata: the display plane must be enabled
>> - * to allow writes to the other bits in the plane
>> - * control register.
>> - */
>> - tmp = INREG(DSPACNTR);
>> - if ((tmp & DISPPLANE_PLANE_ENABLE) != DISPPLANE_PLANE_ENABLE) {
>> - tmp |= DISPPLANE_PLANE_ENABLE;
>> - OUTREG(DSPACNTR, tmp);
>> - OUTREG(DSPACNTR,
>> - hw->disp_a_ctrl|DISPPLANE_PLANE_ENABLE);
>> - mdelay(1);
>> - }
>> - }
>> -
>> - OUTREG(DSPACNTR, hw->disp_a_ctrl & ~DISPPLANE_PLANE_ENABLE);
>> - OUTREG(DSPASTRIDE, hw->disp_a_stride);
>> - OUTREG(DSPABASE, hw->disp_a_base);
>> -
>> - /* Enable plane */
>> - if (!blank) {
>> - tmp = INREG(DSPACNTR);
>> - tmp |= DISPPLANE_PLANE_ENABLE;
>> - OUTREG(DSPACNTR, tmp);
>> - OUTREG(DSPABASE, hw->disp_a_base);
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -/* forward declarations */
>> -static void refresh_ring(struct intelfb_info *dinfo);
>> -static void reset_state(struct intelfb_info *dinfo);
>> -static void do_flush(struct intelfb_info *dinfo);
>> -
>> -static u32 get_ring_space(struct intelfb_info *dinfo)
>> -{
>> - u32 ring_space;
>> -
>> - if (dinfo->ring_tail >= dinfo->ring_head)
>> - ring_space = dinfo->ring.size -
>> - (dinfo->ring_tail - dinfo->ring_head);
>> - else
>> - ring_space = dinfo->ring_head - dinfo->ring_tail;
>> -
>> - if (ring_space > RING_MIN_FREE)
>> - ring_space -= RING_MIN_FREE;
>> - else
>> - ring_space = 0;
>> -
>> - return ring_space;
>> -}
>> -
>> -static int wait_ring(struct intelfb_info *dinfo, int n)
>> -{
>> - int i = 0;
>> - unsigned long end;
>> - u32 last_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("wait_ring: %d\n", n);
>> -#endif
>> -
>> - end = jiffies + (HZ * 3);
>> - while (dinfo->ring_space < n) {
>> - dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
>> - dinfo->ring_space = get_ring_space(dinfo);
>> -
>> - if (dinfo->ring_head != last_head) {
>> - end = jiffies + (HZ * 3);
>> - last_head = dinfo->ring_head;
>> - }
>> - i++;
>> - if (time_before(end, jiffies)) {
>> - if (!i) {
>> - /* Try again */
>> - reset_state(dinfo);
>> - refresh_ring(dinfo);
>> - do_flush(dinfo);
>> - end = jiffies + (HZ * 3);
>> - i = 1;
>> - } else {
>> - WRN_MSG("ring buffer : space: %d wanted %d\n",
>> - dinfo->ring_space, n);
>> - WRN_MSG("lockup - turning off hardware "
>> - "acceleration\n");
>> - dinfo->ring_lockup = 1;
>> - break;
>> - }
>> - }
>> - udelay(1);
>> - }
>> - return i;
>> -}
>> -
>> -static void do_flush(struct intelfb_info *dinfo)
>> -{
>> - START_RING(2);
>> - OUT_RING(MI_FLUSH | MI_WRITE_DIRTY_STATE | MI_INVALIDATE_MAP_CACHE);
>> - OUT_RING(MI_NOOP);
>> - ADVANCE_RING();
>> -}
>> -
>> -void intelfbhw_do_sync(struct intelfb_info *dinfo)
>> -{
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_do_sync\n");
>> -#endif
>> -
>> - if (!dinfo->accel)
>> - return;
>> -
>> - /*
>> - * Send a flush, then wait until the ring is empty. This is what
>> - * the XFree86 driver does, and actually it doesn't seem a lot worse
>> - * than the recommended method (both have problems).
>> - */
>> - do_flush(dinfo);
>> - wait_ring(dinfo, dinfo->ring.size - RING_MIN_FREE);
>> - dinfo->ring_space = dinfo->ring.size - RING_MIN_FREE;
>> -}
>> -
>> -static void refresh_ring(struct intelfb_info *dinfo)
>> -{
>> -#if VERBOSE > 0
>> - DBG_MSG("refresh_ring\n");
>> -#endif
>> -
>> - dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
>> - dinfo->ring_tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK;
>> - dinfo->ring_space = get_ring_space(dinfo);
>> -}
>> -
>> -static void reset_state(struct intelfb_info *dinfo)
>> -{
>> - int i;
>> - u32 tmp;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("reset_state\n");
>> -#endif
>> -
>> - for (i = 0; i < FENCE_NUM; i++)
>> - OUTREG(FENCE + (i << 2), 0);
>> -
>> - /* Flush the ring buffer if it's enabled. */
>> - tmp = INREG(PRI_RING_LENGTH);
>> - if (tmp & RING_ENABLE) {
>> -#if VERBOSE > 0
>> - DBG_MSG("reset_state: ring was enabled\n");
>> -#endif
>> - refresh_ring(dinfo);
>> - intelfbhw_do_sync(dinfo);
>> - DO_RING_IDLE();
>> - }
>> -
>> - OUTREG(PRI_RING_LENGTH, 0);
>> - OUTREG(PRI_RING_HEAD, 0);
>> - OUTREG(PRI_RING_TAIL, 0);
>> - OUTREG(PRI_RING_START, 0);
>> -}
>> -
>> -/* Stop the 2D engine, and turn off the ring buffer. */
>> -void intelfbhw_2d_stop(struct intelfb_info *dinfo)
>> -{
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_2d_stop: accel: %d, ring_active: %d\n",
>> - dinfo->accel, dinfo->ring_active);
>> -#endif
>> -
>> - if (!dinfo->accel)
>> - return;
>> -
>> - dinfo->ring_active = 0;
>> - reset_state(dinfo);
>> -}
>> -
>> -/*
>> - * Enable the ring buffer, and initialise the 2D engine.
>> - * It is assumed that the graphics engine has been stopped by previously
>> - * calling intelfb_2d_stop().
>> - */
>> -void intelfbhw_2d_start(struct intelfb_info *dinfo)
>> -{
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_2d_start: accel: %d, ring_active: %d\n",
>> - dinfo->accel, dinfo->ring_active);
>> -#endif
>> -
>> - if (!dinfo->accel)
>> - return;
>> -
>> - /* Initialise the primary ring buffer. */
>> - OUTREG(PRI_RING_LENGTH, 0);
>> - OUTREG(PRI_RING_TAIL, 0);
>> - OUTREG(PRI_RING_HEAD, 0);
>> -
>> - OUTREG(PRI_RING_START, dinfo->ring.physical & RING_START_MASK);
>> - OUTREG(PRI_RING_LENGTH,
>> - ((dinfo->ring.size - GTT_PAGE_SIZE) & RING_LENGTH_MASK) |
>> - RING_NO_REPORT | RING_ENABLE);
>> - refresh_ring(dinfo);
>> - dinfo->ring_active = 1;
>> -}
>> -
>> -/* 2D fillrect (solid fill or invert) */
>> -void intelfbhw_do_fillrect(struct intelfb_info *dinfo, u32 x, u32 y, u32 w,
>> - u32 h, u32 color, u32 pitch, u32 bpp, u32 rop)
>> -{
>> - u32 br00, br09, br13, br14, br16;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_do_fillrect: (%d,%d) %dx%d, c 0x%06x, p %d bpp %d, "
>> - "rop 0x%02x\n", x, y, w, h, color, pitch, bpp, rop);
>> -#endif
>> -
>> - br00 = COLOR_BLT_CMD;
>> - br09 = dinfo->fb_start + (y * pitch + x * (bpp / 8));
>> - br13 = (rop << ROP_SHIFT) | pitch;
>> - br14 = (h << HEIGHT_SHIFT) | ((w * (bpp / 8)) << WIDTH_SHIFT);
>> - br16 = color;
>> -
>> - switch (bpp) {
>> - case 8:
>> - br13 |= COLOR_DEPTH_8;
>> - break;
>> - case 16:
>> - br13 |= COLOR_DEPTH_16;
>> - break;
>> - case 32:
>> - br13 |= COLOR_DEPTH_32;
>> - br00 |= WRITE_ALPHA | WRITE_RGB;
>> - break;
>> - }
>> -
>> - START_RING(6);
>> - OUT_RING(br00);
>> - OUT_RING(br13);
>> - OUT_RING(br14);
>> - OUT_RING(br09);
>> - OUT_RING(br16);
>> - OUT_RING(MI_NOOP);
>> - ADVANCE_RING();
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("ring = 0x%08x, 0x%08x (%d)\n", dinfo->ring_head,
>> - dinfo->ring_tail, dinfo->ring_space);
>> -#endif
>> -}
>> -
>> -void
>> -intelfbhw_do_bitblt(struct intelfb_info *dinfo, u32 curx, u32 cury,
>> - u32 dstx, u32 dsty, u32 w, u32 h, u32 pitch, u32 bpp)
>> -{
>> - u32 br00, br09, br11, br12, br13, br22, br23, br26;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_do_bitblt: (%d,%d)->(%d,%d) %dx%d, p %d bpp %d\n",
>> - curx, cury, dstx, dsty, w, h, pitch, bpp);
>> -#endif
>> -
>> - br00 = XY_SRC_COPY_BLT_CMD;
>> - br09 = dinfo->fb_start;
>> - br11 = (pitch << PITCH_SHIFT);
>> - br12 = dinfo->fb_start;
>> - br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
>> - br22 = (dstx << WIDTH_SHIFT) | (dsty << HEIGHT_SHIFT);
>> - br23 = ((dstx + w) << WIDTH_SHIFT) |
>> - ((dsty + h) << HEIGHT_SHIFT);
>> - br26 = (curx << WIDTH_SHIFT) | (cury << HEIGHT_SHIFT);
>> -
>> - switch (bpp) {
>> - case 8:
>> - br13 |= COLOR_DEPTH_8;
>> - break;
>> - case 16:
>> - br13 |= COLOR_DEPTH_16;
>> - break;
>> - case 32:
>> - br13 |= COLOR_DEPTH_32;
>> - br00 |= WRITE_ALPHA | WRITE_RGB;
>> - break;
>> - }
>> -
>> - START_RING(8);
>> - OUT_RING(br00);
>> - OUT_RING(br13);
>> - OUT_RING(br22);
>> - OUT_RING(br23);
>> - OUT_RING(br09);
>> - OUT_RING(br26);
>> - OUT_RING(br11);
>> - OUT_RING(br12);
>> - ADVANCE_RING();
>> -}
>> -
>> -int intelfbhw_do_drawglyph(struct intelfb_info *dinfo, u32 fg, u32 bg, u32 w,
>> - u32 h, const u8* cdat, u32 x, u32 y, u32 pitch,
>> - u32 bpp)
>> -{
>> - int nbytes, ndwords, pad, tmp;
>> - u32 br00, br09, br13, br18, br19, br22, br23;
>> - int dat, ix, iy, iw;
>> - int i, j;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_do_drawglyph: (%d,%d) %dx%d\n", x, y, w, h);
>> -#endif
>> -
>> - /* size in bytes of a padded scanline */
>> - nbytes = ROUND_UP_TO(w, 16) / 8;
>> -
>> - /* Total bytes of padded scanline data to write out. */
>> - nbytes = nbytes * h;
>> -
>> - /*
>> - * Check if the glyph data exceeds the immediate mode limit.
>> - * It would take a large font (1K pixels) to hit this limit.
>> - */
>> - if (nbytes > MAX_MONO_IMM_SIZE)
>> - return 0;
>> -
>> - /* Src data is packaged a dword (32-bit) at a time. */
>> - ndwords = ROUND_UP_TO(nbytes, 4) / 4;
>> -
>> - /*
>> - * Ring has to be padded to a quad word. But because the command starts
>> - with 7 bytes, pad only if there is an even number of ndwords
>> - */
>> - pad = !(ndwords % 2);
>> -
>> - tmp = (XY_MONO_SRC_IMM_BLT_CMD & DW_LENGTH_MASK) + ndwords;
>> - br00 = (XY_MONO_SRC_IMM_BLT_CMD & ~DW_LENGTH_MASK) | tmp;
>> - br09 = dinfo->fb_start;
>> - br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
>> - br18 = bg;
>> - br19 = fg;
>> - br22 = (x << WIDTH_SHIFT) | (y << HEIGHT_SHIFT);
>> - br23 = ((x + w) << WIDTH_SHIFT) | ((y + h) << HEIGHT_SHIFT);
>> -
>> - switch (bpp) {
>> - case 8:
>> - br13 |= COLOR_DEPTH_8;
>> - break;
>> - case 16:
>> - br13 |= COLOR_DEPTH_16;
>> - break;
>> - case 32:
>> - br13 |= COLOR_DEPTH_32;
>> - br00 |= WRITE_ALPHA | WRITE_RGB;
>> - break;
>> - }
>> -
>> - START_RING(8 + ndwords);
>> - OUT_RING(br00);
>> - OUT_RING(br13);
>> - OUT_RING(br22);
>> - OUT_RING(br23);
>> - OUT_RING(br09);
>> - OUT_RING(br18);
>> - OUT_RING(br19);
>> - ix = iy = 0;
>> - iw = ROUND_UP_TO(w, 8) / 8;
>> - while (ndwords--) {
>> - dat = 0;
>> - for (j = 0; j < 2; ++j) {
>> - for (i = 0; i < 2; ++i) {
>> - if (ix != iw || i == 0)
>> - dat |= cdat[iy*iw + ix++] << (i+j*2)*8;
>> - }
>> - if (ix == iw && iy != (h-1)) {
>> - ix = 0;
>> - ++iy;
>> - }
>> - }
>> - OUT_RING(dat);
>> - }
>> - if (pad)
>> - OUT_RING(MI_NOOP);
>> - ADVANCE_RING();
>> -
>> - return 1;
>> -}
>> -
>> -/* HW cursor functions. */
>> -void intelfbhw_cursor_init(struct intelfb_info *dinfo)
>> -{
>> - u32 tmp;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_cursor_init\n");
>> -#endif
>> -
>> - if (dinfo->mobile || IS_I9XX(dinfo)) {
>> - if (!dinfo->cursor.physical)
>> - return;
>> - tmp = INREG(CURSOR_A_CONTROL);
>> - tmp &= ~(CURSOR_MODE_MASK | CURSOR_MOBILE_GAMMA_ENABLE |
>> - CURSOR_MEM_TYPE_LOCAL |
>> - (1 << CURSOR_PIPE_SELECT_SHIFT));
>> - tmp |= CURSOR_MODE_DISABLE;
>> - OUTREG(CURSOR_A_CONTROL, tmp);
>> - OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
>> - } else {
>> - tmp = INREG(CURSOR_CONTROL);
>> - tmp &= ~(CURSOR_FORMAT_MASK | CURSOR_GAMMA_ENABLE |
>> - CURSOR_ENABLE | CURSOR_STRIDE_MASK);
>> - tmp |= CURSOR_FORMAT_3C;
>> - OUTREG(CURSOR_CONTROL, tmp);
>> - OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.offset << 12);
>> - tmp = (64 << CURSOR_SIZE_H_SHIFT) |
>> - (64 << CURSOR_SIZE_V_SHIFT);
>> - OUTREG(CURSOR_SIZE, tmp);
>> - }
>> -}
>> -
>> -void intelfbhw_cursor_hide(struct intelfb_info *dinfo)
>> -{
>> - u32 tmp;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_cursor_hide\n");
>> -#endif
>> -
>> - dinfo->cursor_on = 0;
>> - if (dinfo->mobile || IS_I9XX(dinfo)) {
>> - if (!dinfo->cursor.physical)
>> - return;
>> - tmp = INREG(CURSOR_A_CONTROL);
>> - tmp &= ~CURSOR_MODE_MASK;
>> - tmp |= CURSOR_MODE_DISABLE;
>> - OUTREG(CURSOR_A_CONTROL, tmp);
>> - /* Flush changes */
>> - OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
>> - } else {
>> - tmp = INREG(CURSOR_CONTROL);
>> - tmp &= ~CURSOR_ENABLE;
>> - OUTREG(CURSOR_CONTROL, tmp);
>> - }
>> -}
>> -
>> -void intelfbhw_cursor_show(struct intelfb_info *dinfo)
>> -{
>> - u32 tmp;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_cursor_show\n");
>> -#endif
>> -
>> - dinfo->cursor_on = 1;
>> -
>> - if (dinfo->cursor_blanked)
>> - return;
>> -
>> - if (dinfo->mobile || IS_I9XX(dinfo)) {
>> - if (!dinfo->cursor.physical)
>> - return;
>> - tmp = INREG(CURSOR_A_CONTROL);
>> - tmp &= ~CURSOR_MODE_MASK;
>> - tmp |= CURSOR_MODE_64_4C_AX;
>> - OUTREG(CURSOR_A_CONTROL, tmp);
>> - /* Flush changes */
>> - OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
>> - } else {
>> - tmp = INREG(CURSOR_CONTROL);
>> - tmp |= CURSOR_ENABLE;
>> - OUTREG(CURSOR_CONTROL, tmp);
>> - }
>> -}
>> -
>> -void intelfbhw_cursor_setpos(struct intelfb_info *dinfo, int x, int y)
>> -{
>> - u32 tmp;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_cursor_setpos: (%d, %d)\n", x, y);
>> -#endif
>> -
>> - /*
>> - * Sets the position. The coordinates are assumed to already
>> - * have any offset adjusted. Assume that the cursor is never
>> - * completely off-screen, and that x, y are always >= 0.
>> - */
>> -
>> - tmp = ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT) |
>> - ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
>> - OUTREG(CURSOR_A_POSITION, tmp);
>> -
>> - if (IS_I9XX(dinfo))
>> - OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
>> -}
>> -
>> -void intelfbhw_cursor_setcolor(struct intelfb_info *dinfo, u32 bg, u32 fg)
>> -{
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_cursor_setcolor\n");
>> -#endif
>> -
>> - OUTREG(CURSOR_A_PALETTE0, bg & CURSOR_PALETTE_MASK);
>> - OUTREG(CURSOR_A_PALETTE1, fg & CURSOR_PALETTE_MASK);
>> - OUTREG(CURSOR_A_PALETTE2, fg & CURSOR_PALETTE_MASK);
>> - OUTREG(CURSOR_A_PALETTE3, bg & CURSOR_PALETTE_MASK);
>> -}
>> -
>> -void intelfbhw_cursor_load(struct intelfb_info *dinfo, int width, int height,
>> - u8 *data)
>> -{
>> - u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
>> - int i, j, w = width / 8;
>> - int mod = width % 8, t_mask, d_mask;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_cursor_load\n");
>> -#endif
>> -
>> - if (!dinfo->cursor.virtual)
>> - return;
>> -
>> - t_mask = 0xff >> mod;
>> - d_mask = ~(0xff >> mod);
>> - for (i = height; i--; ) {
>> - for (j = 0; j < w; j++) {
>> - writeb(0x00, addr + j);
>> - writeb(*(data++), addr + j+8);
>> - }
>> - if (mod) {
>> - writeb(t_mask, addr + j);
>> - writeb(*(data++) & d_mask, addr + j+8);
>> - }
>> - addr += 16;
>> - }
>> -}
>> -
>> -void intelfbhw_cursor_reset(struct intelfb_info *dinfo)
>> -{
>> - u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
>> - int i, j;
>> -
>> -#if VERBOSE > 0
>> - DBG_MSG("intelfbhw_cursor_reset\n");
>> -#endif
>> -
>> - if (!dinfo->cursor.virtual)
>> - return;
>> -
>> - for (i = 64; i--; ) {
>> - for (j = 0; j < 8; j++) {
>> - writeb(0xff, addr + j+0);
>> - writeb(0x00, addr + j+8);
>> - }
>> - addr += 16;
>> - }
>> -}
>> -
>> -static irqreturn_t intelfbhw_irq(int irq, void *dev_id)
>> -{
>> - u16 tmp;
>> - struct intelfb_info *dinfo = dev_id;
>> -
>> - spin_lock(&dinfo->int_lock);
>> -
>> - tmp = INREG16(IIR);
>> - if (dinfo->info->var.vmode & FB_VMODE_INTERLACED)
>> - tmp &= PIPE_A_EVENT_INTERRUPT;
>> - else
>> - tmp &= VSYNC_PIPE_A_INTERRUPT; /* non-interlaced */
>> -
>> - if (tmp == 0) {
>> - spin_unlock(&dinfo->int_lock);
>> - return IRQ_RETVAL(0); /* not us */
>> - }
>> -
>> - /* clear status bits 0-15 ASAP and don't touch bits 16-31 */
>> - OUTREG(PIPEASTAT, INREG(PIPEASTAT));
>> -
>> - OUTREG16(IIR, tmp);
>> - if (dinfo->vsync.pan_display) {
>> - dinfo->vsync.pan_display = 0;
>> - OUTREG(DSPABASE, dinfo->vsync.pan_offset);
>> - }
>> -
>> - dinfo->vsync.count++;
>> - wake_up_interruptible(&dinfo->vsync.wait);
>> -
>> - spin_unlock(&dinfo->int_lock);
>> -
>> - return IRQ_RETVAL(1);
>> -}
>> -
>> -int intelfbhw_enable_irq(struct intelfb_info *dinfo)
>> -{
>> - u16 tmp;
>> - if (!test_and_set_bit(0, &dinfo->irq_flags)) {
>> - if (request_irq(dinfo->pdev->irq, intelfbhw_irq, IRQF_SHARED,
>> - "intelfb", dinfo)) {
>> - clear_bit(0, &dinfo->irq_flags);
>> - return -EINVAL;
>> - }
>> -
>> - spin_lock_irq(&dinfo->int_lock);
>> - OUTREG16(HWSTAM, 0xfffe); /* i830 DRM uses ffff */
>> - OUTREG16(IMR, 0);
>> - } else
>> - spin_lock_irq(&dinfo->int_lock);
>> -
>> - if (dinfo->info->var.vmode & FB_VMODE_INTERLACED)
>> - tmp = PIPE_A_EVENT_INTERRUPT;
>> - else
>> - tmp = VSYNC_PIPE_A_INTERRUPT; /* non-interlaced */
>> - if (tmp != INREG16(IER)) {
>> - DBG_MSG("changing IER to 0x%X\n", tmp);
>> - OUTREG16(IER, tmp);
>> - }
>> -
>> - spin_unlock_irq(&dinfo->int_lock);
>> - return 0;
>> -}
>> -
>> -void intelfbhw_disable_irq(struct intelfb_info *dinfo)
>> -{
>> - if (test_and_clear_bit(0, &dinfo->irq_flags)) {
>> - if (dinfo->vsync.pan_display) {
>> - dinfo->vsync.pan_display = 0;
>> - OUTREG(DSPABASE, dinfo->vsync.pan_offset);
>> - }
>> - spin_lock_irq(&dinfo->int_lock);
>> - OUTREG16(HWSTAM, 0xffff);
>> - OUTREG16(IMR, 0xffff);
>> - OUTREG16(IER, 0x0);
>> -
>> - OUTREG16(IIR, INREG16(IIR)); /* clear IRQ requests */
>> - spin_unlock_irq(&dinfo->int_lock);
>> -
>> - free_irq(dinfo->pdev->irq, dinfo);
>> - }
>> -}
>> -
>> -int intelfbhw_wait_for_vsync(struct intelfb_info *dinfo, u32 pipe)
>> -{
>> - struct intelfb_vsync *vsync;
>> - unsigned int count;
>> - int ret;
>> -
>> - switch (pipe) {
>> - case 0:
>> - vsync = &dinfo->vsync;
>> - break;
>> - default:
>> - return -ENODEV;
>> - }
>> -
>> - ret = intelfbhw_enable_irq(dinfo);
>> - if (ret)
>> - return ret;
>> -
>> - count = vsync->count;
>> - ret = wait_event_interruptible_timeout(vsync->wait,
>> - count != vsync->count, HZ / 10);
>> - if (ret < 0)
>> - return ret;
>> - if (ret == 0) {
>> - DBG_MSG("wait_for_vsync timed out!\n");
>> - return -ETIMEDOUT;
>> - }
>> -
>> - return 0;
>> -}
>> diff --git a/drivers/video/fbdev/intelfb/intelfbhw.h b/drivers/video/fbdev/intelfb/intelfbhw.h
>> deleted file mode 100644
>> index 216ca20f259f..000000000000
>> --- a/drivers/video/fbdev/intelfb/intelfbhw.h
>> +++ /dev/null
>> @@ -1,609 +0,0 @@
>> -#ifndef _INTELFBHW_H
>> -#define _INTELFBHW_H
>> -
>> -/* $DHD: intelfb/intelfbhw.h,v 1.5 2003/06/27 15:06:25 dawes Exp $ */
>> -
>> -
>> -/*** HW-specific data ***/
>> -
>> -/* Information about the 852GM/855GM variants */
>> -#define INTEL_85X_CAPID 0x44
>> -#define INTEL_85X_VARIANT_MASK 0x7
>> -#define INTEL_85X_VARIANT_SHIFT 5
>> -#define INTEL_VAR_855GME 0x0
>> -#define INTEL_VAR_855GM 0x4
>> -#define INTEL_VAR_852GME 0x2
>> -#define INTEL_VAR_852GM 0x5
>> -
>> -/* Information about DVO/LVDS Ports */
>> -#define DVOA_PORT 0x1
>> -#define DVOB_PORT 0x2
>> -#define DVOC_PORT 0x4
>> -#define LVDS_PORT 0x8
>> -
>> -/*
>> - * The Bridge device's PCI config space has information about the
>> - * fb aperture size and the amount of pre-reserved memory.
>> - */
>> -#define INTEL_GMCH_CTRL 0x52
>> -#define INTEL_GMCH_ENABLED 0x4
>> -#define INTEL_GMCH_MEM_MASK 0x1
>> -#define INTEL_GMCH_MEM_64M 0x1
>> -#define INTEL_GMCH_MEM_128M 0
>> -
>> -#define INTEL_830_GMCH_GMS_MASK (0x7 << 4)
>> -#define INTEL_830_GMCH_GMS_DISABLED (0x0 << 4)
>> -#define INTEL_830_GMCH_GMS_LOCAL (0x1 << 4)
>> -#define INTEL_830_GMCH_GMS_STOLEN_512 (0x2 << 4)
>> -#define INTEL_830_GMCH_GMS_STOLEN_1024 (0x3 << 4)
>> -#define INTEL_830_GMCH_GMS_STOLEN_8192 (0x4 << 4)
>> -
>> -#define INTEL_855_GMCH_GMS_MASK (0x7 << 4)
>> -#define INTEL_855_GMCH_GMS_DISABLED (0x0 << 4)
>> -#define INTEL_855_GMCH_GMS_STOLEN_1M (0x1 << 4)
>> -#define INTEL_855_GMCH_GMS_STOLEN_4M (0x2 << 4)
>> -#define INTEL_855_GMCH_GMS_STOLEN_8M (0x3 << 4)
>> -#define INTEL_855_GMCH_GMS_STOLEN_16M (0x4 << 4)
>> -#define INTEL_855_GMCH_GMS_STOLEN_32M (0x5 << 4)
>> -
>> -#define INTEL_915G_GMCH_GMS_STOLEN_48M (0x6 << 4)
>> -#define INTEL_915G_GMCH_GMS_STOLEN_64M (0x7 << 4)
>> -
>> -/* HW registers */
>> -
>> -/* Fence registers */
>> -#define FENCE 0x2000
>> -#define FENCE_NUM 8
>> -
>> -/* Primary ring buffer */
>> -#define PRI_RING_TAIL 0x2030
>> -#define RING_TAIL_MASK 0x001ffff8
>> -#define RING_INUSE 0x1
>> -
>> -#define PRI_RING_HEAD 0x2034
>> -#define RING_HEAD_WRAP_MASK 0x7ff
>> -#define RING_HEAD_WRAP_SHIFT 21
>> -#define RING_HEAD_MASK 0x001ffffc
>> -
>> -#define PRI_RING_START 0x2038
>> -#define RING_START_MASK 0xfffff000
>> -
>> -#define PRI_RING_LENGTH 0x203c
>> -#define RING_LENGTH_MASK 0x001ff000
>> -#define RING_REPORT_MASK (0x3 << 1)
>> -#define RING_NO_REPORT (0x0 << 1)
>> -#define RING_REPORT_64K (0x1 << 1)
>> -#define RING_REPORT_4K (0x2 << 1)
>> -#define RING_REPORT_128K (0x3 << 1)
>> -#define RING_ENABLE 0x1
>> -
>> -/*
>> - * Tail can't wrap to any closer than RING_MIN_FREE bytes of the head,
>> - * and the last RING_MIN_FREE bytes need to be padded with MI_NOOP
>> - */
>> -#define RING_MIN_FREE 64
>> -
>> -#define IPEHR 0x2088
>> -
>> -#define INSTDONE 0x2090
>> -#define PRI_RING_EMPTY 1
>> -
>> -#define HWSTAM 0x2098
>> -#define IER 0x20A0
>> -#define IIR 0x20A4
>> -#define IMR 0x20A8
>> -#define VSYNC_PIPE_A_INTERRUPT (1 << 7)
>> -#define PIPE_A_EVENT_INTERRUPT (1 << 6)
>> -#define VSYNC_PIPE_B_INTERRUPT (1 << 5)
>> -#define PIPE_B_EVENT_INTERRUPT (1 << 4)
>> -#define HOST_PORT_EVENT_INTERRUPT (1 << 3)
>> -#define CAPTURE_EVENT_INTERRUPT (1 << 2)
>> -#define USER_DEFINED_INTERRUPT (1 << 1)
>> -#define BREAKPOINT_INTERRUPT 1
>> -
>> -#define INSTPM 0x20c0
>> -#define SYNC_FLUSH_ENABLE (1 << 5)
>> -
>> -#define INSTPS 0x20c4
>> -
>> -#define MEM_MODE 0x20cc
>> -
>> -#define MASK_SHIFT 16
>> -
>> -#define FW_BLC_0 0x20d8
>> -#define FW_DISPA_WM_SHIFT 0
>> -#define FW_DISPA_WM_MASK 0x3f
>> -#define FW_DISPA_BL_SHIFT 8
>> -#define FW_DISPA_BL_MASK 0xf
>> -#define FW_DISPB_WM_SHIFT 16
>> -#define FW_DISPB_WM_MASK 0x1f
>> -#define FW_DISPB_BL_SHIFT 24
>> -#define FW_DISPB_BL_MASK 0x7
>> -
>> -#define FW_BLC_1 0x20dc
>> -#define FW_DISPC_WM_SHIFT 0
>> -#define FW_DISPC_WM_MASK 0x1f
>> -#define FW_DISPC_BL_SHIFT 8
>> -#define FW_DISPC_BL_MASK 0x7
>> -
>> -#define GPIOA 0x5010
>> -#define GPIOB 0x5014
>> -#define GPIOC 0x5018 /* this may be external DDC on i830 */
>> -#define GPIOD 0x501C /* this is DVO DDC */
>> -#define GPIOE 0x5020 /* this is DVO i2C */
>> -#define GPIOF 0x5024
>> -
>> -/* PLL registers */
>> -#define VGA0_DIVISOR 0x06000
>> -#define VGA1_DIVISOR 0x06004
>> -#define VGAPD 0x06010
>> -#define VGAPD_0_P1_SHIFT 0
>> -#define VGAPD_0_P1_FORCE_DIV2 (1 << 5)
>> -#define VGAPD_0_P2_SHIFT 7
>> -#define VGAPD_1_P1_SHIFT 8
>> -#define VGAPD_1_P1_FORCE_DIV2 (1 << 13)
>> -#define VGAPD_1_P2_SHIFT 15
>> -
>> -#define DPLL_A 0x06014
>> -#define DPLL_B 0x06018
>> -#define DPLL_VCO_ENABLE (1 << 31)
>> -#define DPLL_2X_CLOCK_ENABLE (1 << 30)
>> -#define DPLL_SYNCLOCK_ENABLE (1 << 29)
>> -#define DPLL_VGA_MODE_DISABLE (1 << 28)
>> -#define DPLL_P2_MASK 1
>> -#define DPLL_P2_SHIFT 23
>> -#define DPLL_I9XX_P2_SHIFT 24
>> -#define DPLL_P1_FORCE_DIV2 (1 << 21)
>> -#define DPLL_P1_MASK 0x1f
>> -#define DPLL_P1_SHIFT 16
>> -#define DPLL_REFERENCE_SELECT_MASK (0x3 << 13)
>> -#define DPLL_REFERENCE_DEFAULT (0x0 << 13)
>> -#define DPLL_REFERENCE_TVCLK (0x2 << 13)
>> -#define DPLL_RATE_SELECT_MASK (1 << 8)
>> -#define DPLL_RATE_SELECT_FP0 (0 << 8)
>> -#define DPLL_RATE_SELECT_FP1 (1 << 8)
>> -
>> -#define FPA0 0x06040
>> -#define FPA1 0x06044
>> -#define FPB0 0x06048
>> -#define FPB1 0x0604c
>> -#define FP_DIVISOR_MASK 0x3f
>> -#define FP_N_DIVISOR_SHIFT 16
>> -#define FP_M1_DIVISOR_SHIFT 8
>> -#define FP_M2_DIVISOR_SHIFT 0
>> -
>> -/* PLL parameters (these are for 852GM/855GM/865G, check earlier chips). */
>> -/* Clock values are in units of kHz */
>> -#define PLL_REFCLK 48000
>> -#define MIN_CLOCK 25000
>> -#define MAX_CLOCK 350000
>> -
>> -/* Two pipes */
>> -#define PIPE_A 0
>> -#define PIPE_B 1
>> -#define PIPE_MASK 1
>> -
>> -/* palette registers */
>> -#define PALETTE_A 0x0a000
>> -#define PALETTE_B 0x0a800
>> -#ifndef PALETTE_8_ENTRIES
>> -#define PALETTE_8_ENTRIES 256
>> -#endif
>> -#define PALETTE_8_SIZE (PALETTE_8_ENTRIES * 4)
>> -#define PALETTE_10_ENTRIES 128
>> -#define PALETTE_10_SIZE (PALETTE_10_ENTRIES * 8)
>> -#define PALETTE_8_MASK 0xff
>> -#define PALETTE_8_RED_SHIFT 16
>> -#define PALETTE_8_GREEN_SHIFT 8
>> -#define PALETTE_8_BLUE_SHIFT 0
>> -
>> -/* CRTC registers */
>> -#define HTOTAL_A 0x60000
>> -#define HBLANK_A 0x60004
>> -#define HSYNC_A 0x60008
>> -#define VTOTAL_A 0x6000c
>> -#define VBLANK_A 0x60010
>> -#define VSYNC_A 0x60014
>> -#define SRC_SIZE_A 0x6001c
>> -#define BCLRPAT_A 0x60020
>> -
>> -#define HTOTAL_B 0x61000
>> -#define HBLANK_B 0x61004
>> -#define HSYNC_B 0x61008
>> -#define VTOTAL_B 0x6100c
>> -#define VBLANK_B 0x61010
>> -#define VSYNC_B 0x61014
>> -#define SRC_SIZE_B 0x6101c
>> -#define BCLRPAT_B 0x61020
>> -
>> -#define HTOTAL_MASK 0xfff
>> -#define HTOTAL_SHIFT 16
>> -#define HACTIVE_MASK 0x7ff
>> -#define HACTIVE_SHIFT 0
>> -#define HBLANKEND_MASK 0xfff
>> -#define HBLANKEND_SHIFT 16
>> -#define HBLANKSTART_MASK 0xfff
>> -#define HBLANKSTART_SHIFT 0
>> -#define HSYNCEND_MASK 0xfff
>> -#define HSYNCEND_SHIFT 16
>> -#define HSYNCSTART_MASK 0xfff
>> -#define HSYNCSTART_SHIFT 0
>> -#define VTOTAL_MASK 0xfff
>> -#define VTOTAL_SHIFT 16
>> -#define VACTIVE_MASK 0x7ff
>> -#define VACTIVE_SHIFT 0
>> -#define VBLANKEND_MASK 0xfff
>> -#define VBLANKEND_SHIFT 16
>> -#define VBLANKSTART_MASK 0xfff
>> -#define VBLANKSTART_SHIFT 0
>> -#define VSYNCEND_MASK 0xfff
>> -#define VSYNCEND_SHIFT 16
>> -#define VSYNCSTART_MASK 0xfff
>> -#define VSYNCSTART_SHIFT 0
>> -#define SRC_SIZE_HORIZ_MASK 0x7ff
>> -#define SRC_SIZE_HORIZ_SHIFT 16
>> -#define SRC_SIZE_VERT_MASK 0x7ff
>> -#define SRC_SIZE_VERT_SHIFT 0
>> -
>> -#define ADPA 0x61100
>> -#define ADPA_DAC_ENABLE (1 << 31)
>> -#define ADPA_DAC_DISABLE 0
>> -#define ADPA_PIPE_SELECT_SHIFT 30
>> -#define ADPA_USE_VGA_HVPOLARITY (1 << 15)
>> -#define ADPA_SETS_HVPOLARITY 0
>> -#define ADPA_DPMS_CONTROL_MASK (0x3 << 10)
>> -#define ADPA_DPMS_D0 (0x0 << 10)
>> -#define ADPA_DPMS_D2 (0x1 << 10)
>> -#define ADPA_DPMS_D1 (0x2 << 10)
>> -#define ADPA_DPMS_D3 (0x3 << 10)
>> -#define ADPA_VSYNC_ACTIVE_SHIFT 4
>> -#define ADPA_HSYNC_ACTIVE_SHIFT 3
>> -#define ADPA_SYNC_ACTIVE_MASK 1
>> -#define ADPA_SYNC_ACTIVE_HIGH 1
>> -#define ADPA_SYNC_ACTIVE_LOW 0
>> -
>> -#define DVOA 0x61120
>> -#define DVOB 0x61140
>> -#define DVOC 0x61160
>> -#define LVDS 0x61180
>> -#define PORT_ENABLE (1 << 31)
>> -#define PORT_PIPE_SELECT_SHIFT 30
>> -#define PORT_TV_FLAGS_MASK 0xFF
>> -#define PORT_TV_FLAGS 0xC4 /* ripped from my BIOS
>> - to understand and correct */
>> -
>> -#define DVOA_SRCDIM 0x61124
>> -#define DVOB_SRCDIM 0x61144
>> -#define DVOC_SRCDIM 0x61164
>> -
>> -#define PIPEA_DSL 0x70000
>> -#define PIPEB_DSL 0x71000
>> -#define PIPEACONF 0x70008
>> -#define PIPEBCONF 0x71008
>> -#define PIPEASTAT 0x70024 /* bits 0-15 are "write 1 to clear" */
>> -#define PIPEBSTAT 0x71024
>> -
>> -#define PIPECONF_ENABLE (1 << 31)
>> -#define PIPECONF_DISABLE 0
>> -#define PIPECONF_DOUBLE_WIDE (1 << 30)
>> -#define PIPECONF_SINGLE_WIDE 0
>> -#define PIPECONF_LOCKED (1 << 25)
>> -#define PIPECONF_UNLOCKED 0
>> -#define PIPECONF_GAMMA (1 << 24)
>> -#define PIPECONF_PALETTE 0
>> -#define PIPECONF_PROGRESSIVE (0 << 21)
>> -#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
>> -#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
>> -#define PIPECONF_INTERLACE_MASK (7 << 21)
>> -
>> -/* enable bits, write 1 to enable */
>> -#define PIPESTAT_FIFO_UNDERRUN (1 << 31)
>> -#define PIPESTAT_CRC_ERROR_EN (1 << 29)
>> -#define PIPESTAT_CRC_DONE_EN (1 << 28)
>> -#define PIPESTAT_HOTPLUG_EN (1 << 26)
>> -#define PIPESTAT_VERTICAL_SYNC_EN (1 << 25)
>> -#define PIPESTAT_DISPLINE_COMP_EN (1 << 24)
>> -#define PIPESTAT_FLD_EVT_ODD_EN (1 << 21)
>> -#define PIPESTAT_FLD_EVT_EVEN_EN (1 << 20)
>> -#define PIPESTAT_TV_HOTPLUG_EN (1 << 18)
>> -#define PIPESTAT_VBLANK_EN (1 << 17)
>> -#define PIPESTAT_OVL_UPDATE_EN (1 << 16)
>> -/* status bits, write 1 to clear */
>> -#define PIPESTAT_HOTPLUG_STATE (1 << 15)
>> -#define PIPESTAT_CRC_ERROR (1 << 13)
>> -#define PIPESTAT_CRC_DONE (1 << 12)
>> -#define PIPESTAT_HOTPLUG (1 << 10)
>> -#define PIPESTAT_VSYNC (1 << 9)
>> -#define PIPESTAT_DISPLINE_COMP (1 << 8)
>> -#define PIPESTAT_FLD_EVT_ODD (1 << 5)
>> -#define PIPESTAT_FLD_EVT_EVEN (1 << 4)
>> -#define PIPESTAT_TV_HOTPLUG (1 << 2)
>> -#define PIPESTAT_VBLANK (1 << 1)
>> -#define PIPESTAT_OVL_UPDATE (1 << 0)
>> -
>> -#define DISPARB 0x70030
>> -#define DISPARB_AEND_MASK 0x1ff
>> -#define DISPARB_AEND_SHIFT 0
>> -#define DISPARB_BEND_MASK 0x3ff
>> -#define DISPARB_BEND_SHIFT 9
>> -
>> -/* Desktop HW cursor */
>> -#define CURSOR_CONTROL 0x70080
>> -#define CURSOR_ENABLE (1 << 31)
>> -#define CURSOR_GAMMA_ENABLE (1 << 30)
>> -#define CURSOR_STRIDE_MASK (0x3 << 28)
>> -#define CURSOR_STRIDE_256 (0x0 << 28)
>> -#define CURSOR_STRIDE_512 (0x1 << 28)
>> -#define CURSOR_STRIDE_1K (0x2 << 28)
>> -#define CURSOR_STRIDE_2K (0x3 << 28)
>> -#define CURSOR_FORMAT_MASK (0x7 << 24)
>> -#define CURSOR_FORMAT_2C (0x0 << 24)
>> -#define CURSOR_FORMAT_3C (0x1 << 24)
>> -#define CURSOR_FORMAT_4C (0x2 << 24)
>> -#define CURSOR_FORMAT_ARGB (0x4 << 24)
>> -#define CURSOR_FORMAT_XRGB (0x5 << 24)
>> -
>> -/* Mobile HW cursor (and i810) */
>> -#define CURSOR_A_CONTROL CURSOR_CONTROL
>> -#define CURSOR_B_CONTROL 0x700c0
>> -#define CURSOR_MODE_MASK 0x27
>> -#define CURSOR_MODE_DISABLE 0
>> -#define CURSOR_MODE_64_3C 0x04
>> -#define CURSOR_MODE_64_4C_AX 0x05
>> -#define CURSOR_MODE_64_4C 0x06
>> -#define CURSOR_MODE_64_32B_AX 0x07
>> -#define CURSOR_MODE_64_ARGB_AX 0x27
>> -#define CURSOR_PIPE_SELECT_SHIFT 28
>> -#define CURSOR_MOBILE_GAMMA_ENABLE (1 << 26)
>> -#define CURSOR_MEM_TYPE_LOCAL (1 << 25)
>> -
>> -/* All platforms (desktop has no pipe B) */
>> -#define CURSOR_A_BASEADDR 0x70084
>> -#define CURSOR_B_BASEADDR 0x700c4
>> -#define CURSOR_BASE_MASK 0xffffff00
>> -
>> -#define CURSOR_A_POSITION 0x70088
>> -#define CURSOR_B_POSITION 0x700c8
>> -#define CURSOR_POS_SIGN (1 << 15)
>> -#define CURSOR_POS_MASK 0x7ff
>> -#define CURSOR_X_SHIFT 0
>> -#define CURSOR_Y_SHIFT 16
>> -
>> -#define CURSOR_A_PALETTE0 0x70090
>> -#define CURSOR_A_PALETTE1 0x70094
>> -#define CURSOR_A_PALETTE2 0x70098
>> -#define CURSOR_A_PALETTE3 0x7009c
>> -#define CURSOR_B_PALETTE0 0x700d0
>> -#define CURSOR_B_PALETTE1 0x700d4
>> -#define CURSOR_B_PALETTE2 0x700d8
>> -#define CURSOR_B_PALETTE3 0x700dc
>> -#define CURSOR_COLOR_MASK 0xff
>> -#define CURSOR_RED_SHIFT 16
>> -#define CURSOR_GREEN_SHIFT 8
>> -#define CURSOR_BLUE_SHIFT 0
>> -#define CURSOR_PALETTE_MASK 0xffffff
>> -
>> -/* Desktop only */
>> -#define CURSOR_SIZE 0x700a0
>> -#define CURSOR_SIZE_MASK 0x3ff
>> -#define CURSOR_SIZE_H_SHIFT 0
>> -#define CURSOR_SIZE_V_SHIFT 12
>> -
>> -#define DSPACNTR 0x70180
>> -#define DSPBCNTR 0x71180
>> -#define DISPPLANE_PLANE_ENABLE (1 << 31)
>> -#define DISPPLANE_PLANE_DISABLE 0
>> -#define DISPPLANE_GAMMA_ENABLE (1<<30)
>> -#define DISPPLANE_GAMMA_DISABLE 0
>> -#define DISPPLANE_PIXFORMAT_MASK (0xf<<26)
>> -#define DISPPLANE_8BPP (0x2<<26)
>> -#define DISPPLANE_15_16BPP (0x4<<26)
>> -#define DISPPLANE_16BPP (0x5<<26)
>> -#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26)
>> -#define DISPPLANE_32BPP (0x7<<26)
>> -#define DISPPLANE_STEREO_ENABLE (1<<25)
>> -#define DISPPLANE_STEREO_DISABLE 0
>> -#define DISPPLANE_SEL_PIPE_SHIFT 24
>> -#define DISPPLANE_SRC_KEY_ENABLE (1<<22)
>> -#define DISPPLANE_SRC_KEY_DISABLE 0
>> -#define DISPPLANE_LINE_DOUBLE (1<<20)
>> -#define DISPPLANE_NO_LINE_DOUBLE 0
>> -#define DISPPLANE_STEREO_POLARITY_FIRST 0
>> -#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
>> -/* plane B only */
>> -#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15)
>> -#define DISPPLANE_ALPHA_TRANS_DISABLE 0
>> -#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0
>> -#define DISPPLANE_SPRITE_ABOVE_OVERLAY 1
>> -
>> -#define DSPABASE 0x70184
>> -#define DSPASTRIDE 0x70188
>> -
>> -#define DSPBBASE 0x71184
>> -#define DSPBSTRIDE 0x71188
>> -
>> -#define VGACNTRL 0x71400
>> -#define VGA_DISABLE (1 << 31)
>> -#define VGA_ENABLE 0
>> -#define VGA_PIPE_SELECT_SHIFT 29
>> -#define VGA_PALETTE_READ_SELECT 23
>> -#define VGA_PALETTE_A_WRITE_DISABLE (1 << 22)
>> -#define VGA_PALETTE_B_WRITE_DISABLE (1 << 21)
>> -#define VGA_LEGACY_PALETTE (1 << 20)
>> -#define VGA_6BIT_DAC 0
>> -#define VGA_8BIT_DAC (1 << 20)
>> -
>> -#define ADD_ID 0x71408
>> -#define ADD_ID_MASK 0xff
>> -
>> -/* BIOS scratch area registers (830M and 845G). */
>> -#define SWF0 0x71410
>> -#define SWF1 0x71414
>> -#define SWF2 0x71418
>> -#define SWF3 0x7141c
>> -#define SWF4 0x71420
>> -#define SWF5 0x71424
>> -#define SWF6 0x71428
>> -
>> -/* BIOS scratch area registers (852GM, 855GM, 865G). */
>> -#define SWF00 0x70410
>> -#define SWF01 0x70414
>> -#define SWF02 0x70418
>> -#define SWF03 0x7041c
>> -#define SWF04 0x70420
>> -#define SWF05 0x70424
>> -#define SWF06 0x70428
>> -
>> -#define SWF10 SWF0
>> -#define SWF11 SWF1
>> -#define SWF12 SWF2
>> -#define SWF13 SWF3
>> -#define SWF14 SWF4
>> -#define SWF15 SWF5
>> -#define SWF16 SWF6
>> -
>> -#define SWF30 0x72414
>> -#define SWF31 0x72418
>> -#define SWF32 0x7241c
>> -
>> -/* Memory Commands */
>> -#define MI_NOOP (0x00 << 23)
>> -#define MI_NOOP_WRITE_ID (1 << 22)
>> -#define MI_NOOP_ID_MASK ((1 << 22) - 1)
>> -
>> -#define MI_FLUSH (0x04 << 23)
>> -#define MI_WRITE_DIRTY_STATE (1 << 4)
>> -#define MI_END_SCENE (1 << 3)
>> -#define MI_INHIBIT_RENDER_CACHE_FLUSH (1 << 2)
>> -#define MI_INVALIDATE_MAP_CACHE (1 << 0)
>> -
>> -#define MI_STORE_DWORD_IMM ((0x20 << 23) | 1)
>> -
>> -/* 2D Commands */
>> -#define COLOR_BLT_CMD ((2 << 29) | (0x40 << 22) | 3)
>> -#define XY_COLOR_BLT_CMD ((2 << 29) | (0x50 << 22) | 4)
>> -#define XY_SETUP_CLIP_BLT_CMD ((2 << 29) | (0x03 << 22) | 1)
>> -#define XY_SRC_COPY_BLT_CMD ((2 << 29) | (0x53 << 22) | 6)
>> -#define SRC_COPY_BLT_CMD ((2 << 29) | (0x43 << 22) | 4)
>> -#define XY_MONO_PAT_BLT_CMD ((2 << 29) | (0x52 << 22) | 7)
>> -#define XY_MONO_SRC_BLT_CMD ((2 << 29) | (0x54 << 22) | 6)
>> -#define XY_MONO_SRC_IMM_BLT_CMD ((2 << 29) | (0x71 << 22) | 5)
>> -#define TXT_IMM_BLT_CMD ((2 << 29) | (0x30 << 22) | 2)
>> -#define SETUP_BLT_CMD ((2 << 29) | (0x00 << 22) | 6)
>> -
>> -#define DW_LENGTH_MASK 0xff
>> -
>> -#define WRITE_ALPHA (1 << 21)
>> -#define WRITE_RGB (1 << 20)
>> -#define VERT_SEED (3 << 8)
>> -#define HORIZ_SEED (3 << 12)
>> -
>> -#define COLOR_DEPTH_8 (0 << 24)
>> -#define COLOR_DEPTH_16 (1 << 24)
>> -#define COLOR_DEPTH_32 (3 << 24)
>> -
>> -#define SRC_ROP_GXCOPY 0xcc
>> -#define SRC_ROP_GXXOR 0x66
>> -
>> -#define PAT_ROP_GXCOPY 0xf0
>> -#define PAT_ROP_GXXOR 0x5a
>> -
>> -#define PITCH_SHIFT 0
>> -#define ROP_SHIFT 16
>> -#define WIDTH_SHIFT 0
>> -#define HEIGHT_SHIFT 16
>> -
>> -/* in bytes */
>> -#define MAX_MONO_IMM_SIZE 128
>> -
>> -
>> -/*** Macros ***/
>> -
>> -/* I/O macros */
>> -#define INREG8(addr) readb((u8 __iomem *)(dinfo->mmio_base + (addr)))
>> -#define INREG16(addr) readw((u16 __iomem *)(dinfo->mmio_base + (addr)))
>> -#define INREG(addr) readl((u32 __iomem *)(dinfo->mmio_base + (addr)))
>> -#define OUTREG8(addr, val) writeb((val),(u8 __iomem *)(dinfo->mmio_base + \
>> - (addr)))
>> -#define OUTREG16(addr, val) writew((val),(u16 __iomem *)(dinfo->mmio_base + \
>> - (addr)))
>> -#define OUTREG(addr, val) writel((val),(u32 __iomem *)(dinfo->mmio_base + \
>> - (addr)))
>> -
>> -/* Ring buffer macros */
>> -#define OUT_RING(n) do { \
>> - writel((n), (u32 __iomem *)(dinfo->ring.virtual + dinfo->ring_tail));\
>> - dinfo->ring_tail += 4; \
>> - dinfo->ring_tail &= dinfo->ring_tail_mask; \
>> -} while (0)
>> -
>> -#define START_RING(n) do { \
>> - if (dinfo->ring_space < (n) * 4) \
>> - wait_ring(dinfo,(n) * 4); \
>> - dinfo->ring_space -= (n) * 4; \
>> -} while (0)
>> -
>> -#define ADVANCE_RING() do { \
>> - OUTREG(PRI_RING_TAIL, dinfo->ring_tail); \
>> -} while (0)
>> -
>> -#define DO_RING_IDLE() do { \
>> - u32 head, tail; \
>> - do { \
>> - head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK; \
>> - tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK; \
>> - udelay(10); \
>> - } while (head != tail); \
>> -} while (0)
>> -
>> -
>> -/* function protoypes */
>> -extern int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo);
>> -extern int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
>> - int *stolen_size);
>> -extern int intelfbhw_check_non_crt(struct intelfb_info *dinfo);
>> -extern const char *intelfbhw_dvo_to_string(int dvo);
>> -extern int intelfbhw_validate_mode(struct intelfb_info *dinfo,
>> - struct fb_var_screeninfo *var);
>> -extern int intelfbhw_pan_display(struct fb_var_screeninfo *var,
>> - struct fb_info *info);
>> -extern void intelfbhw_do_blank(int blank, struct fb_info *info);
>> -extern void intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
>> - unsigned red, unsigned green, unsigned blue,
>> - unsigned transp);
>> -extern int intelfbhw_read_hw_state(struct intelfb_info *dinfo,
>> - struct intelfb_hwstate *hw, int flag);
>> -extern void intelfbhw_print_hw_state(struct intelfb_info *dinfo,
>> - struct intelfb_hwstate *hw);
>> -extern int intelfbhw_mode_to_hw(struct intelfb_info *dinfo,
>> - struct intelfb_hwstate *hw,
>> - struct fb_var_screeninfo *var);
>> -extern int intelfbhw_program_mode(struct intelfb_info *dinfo,
>> - const struct intelfb_hwstate *hw, int blank);
>> -extern void intelfbhw_do_sync(struct intelfb_info *dinfo);
>> -extern void intelfbhw_2d_stop(struct intelfb_info *dinfo);
>> -extern void intelfbhw_2d_start(struct intelfb_info *dinfo);
>> -extern void intelfbhw_do_fillrect(struct intelfb_info *dinfo, u32 x, u32 y,
>> - u32 w, u32 h, u32 color, u32 pitch, u32 bpp,
>> - u32 rop);
>> -extern void intelfbhw_do_bitblt(struct intelfb_info *dinfo, u32 curx, u32 cury,
>> - u32 dstx, u32 dsty, u32 w, u32 h, u32 pitch,
>> - u32 bpp);
>> -extern int intelfbhw_do_drawglyph(struct intelfb_info *dinfo, u32 fg, u32 bg,
>> - u32 w, u32 h, const u8* cdat, u32 x, u32 y,
>> - u32 pitch, u32 bpp);
>> -extern void intelfbhw_cursor_init(struct intelfb_info *dinfo);
>> -extern void intelfbhw_cursor_hide(struct intelfb_info *dinfo);
>> -extern void intelfbhw_cursor_show(struct intelfb_info *dinfo);
>> -extern void intelfbhw_cursor_setpos(struct intelfb_info *dinfo, int x, int y);
>> -extern void intelfbhw_cursor_setcolor(struct intelfb_info *dinfo, u32 bg,
>> - u32 fg);
>> -extern void intelfbhw_cursor_load(struct intelfb_info *dinfo, int width,
>> - int height, u8 *data);
>> -extern void intelfbhw_cursor_reset(struct intelfb_info *dinfo);
>> -extern int intelfbhw_enable_irq(struct intelfb_info *dinfo);
>> -extern void intelfbhw_disable_irq(struct intelfb_info *dinfo);
>> -extern int intelfbhw_wait_for_vsync(struct intelfb_info *dinfo, u32 pipe);
>> -extern int intelfbhw_active_pipe(const struct intelfb_hwstate *hw);
>> -
>> -#endif /* _INTELFBHW_H */
>> --
>> 2.43.0
>>
>
> --Maik
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature.asc
Type: application/pgp-signature
Size: 840 bytes
Desc: OpenPGP digital signature
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20240108/a2f62363/attachment-0001.sig>
More information about the dri-devel
mailing list