[PATCH 11/12] drm/imx: parallel-display: switch to imx_legacy_bridge / drm_bridge_connector

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Mon Mar 11 11:24:45 UTC 2024


On Mon, 11 Mar 2024 at 13:20, Dmitry Baryshkov
<dmitry.baryshkov at linaro.org> wrote:
>
> Use the imx_legacy bridge driver instead of handlign display modes via
> the connector node.
>
> All existing usecases already support attaching using
> the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, while the imx_legacy bridge
> doesn't support creating connector at all. Switch to
> drm_bridge_connector at the same time.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  drivers/gpu/drm/imx/ipuv3/parallel-display.c | 95 +++++-----------------------
>  1 file changed, 17 insertions(+), 78 deletions(-)
>
> diff --git a/drivers/gpu/drm/imx/ipuv3/parallel-display.c b/drivers/gpu/drm/imx/ipuv3/parallel-display.c
> index 9b60bfbd16e6..73a15259c93c 100644
> --- a/drivers/gpu/drm/imx/ipuv3/parallel-display.c
> +++ b/drivers/gpu/drm/imx/ipuv3/parallel-display.c
> @@ -12,10 +12,9 @@
>  #include <linux/platform_device.h>
>  #include <linux/videodev2.h>
>
> -#include <video/of_display_timing.h>
> -
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_bridge.h>
> +#include <drm/drm_bridge_connector.h>
>  #include <drm/drm_managed.h>
>  #include <drm/drm_of.h>
>  #include <drm/drm_panel.h>
> @@ -25,7 +24,6 @@
>  #include "imx-drm.h"
>
>  struct imx_parallel_display_encoder {
> -       struct drm_connector connector;
>         struct drm_encoder encoder;
>         struct drm_bridge bridge;
>         struct imx_parallel_display *pd;
> @@ -34,51 +32,14 @@ struct imx_parallel_display_encoder {
>  struct imx_parallel_display {
>         struct device *dev;
>         u32 bus_format;
> -       u32 bus_flags;
> -       struct drm_display_mode mode;
>         struct drm_bridge *next_bridge;
>  };
>
> -static inline struct imx_parallel_display *con_to_imxpd(struct drm_connector *c)
> -{
> -       return container_of(c, struct imx_parallel_display_encoder, connector)->pd;
> -}
> -
>  static inline struct imx_parallel_display *bridge_to_imxpd(struct drm_bridge *b)
>  {
>         return container_of(b, struct imx_parallel_display_encoder, bridge)->pd;
>  }
>
> -static int imx_pd_connector_get_modes(struct drm_connector *connector)
> -{
> -       struct imx_parallel_display *imxpd = con_to_imxpd(connector);
> -       struct device_node *np = imxpd->dev->of_node;
> -       int num_modes;
> -
> -       if (np) {
> -               struct drm_display_mode *mode = drm_mode_create(connector->dev);
> -               int ret;
> -
> -               if (!mode)
> -                       return -EINVAL;
> -
> -               ret = of_get_drm_display_mode(np, &imxpd->mode,
> -                                             &imxpd->bus_flags,
> -                                             OF_USE_NATIVE_MODE);
> -               if (ret) {
> -                       drm_mode_destroy(connector->dev, mode);
> -                       return ret;
> -               }
> -
> -               drm_mode_copy(mode, &imxpd->mode);
> -               mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> -               drm_mode_probed_add(connector, mode);
> -               num_modes++;
> -       }
> -
> -       return num_modes;
> -}
> -
>  static const u32 imx_pd_bus_fmts[] = {
>         MEDIA_BUS_FMT_RGB888_1X24,
>         MEDIA_BUS_FMT_BGR888_1X24,
> @@ -172,7 +133,6 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge,
>  {
>         struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state);
>         struct drm_display_info *di = &conn_state->connector->display_info;
> -       struct imx_parallel_display *imxpd = bridge_to_imxpd(bridge);
>         struct drm_bridge_state *next_bridge_state = NULL;
>         struct drm_bridge *next_bridge;
>         u32 bus_flags, bus_fmt;
> @@ -184,10 +144,8 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge,
>
>         if (next_bridge_state)
>                 bus_flags = next_bridge_state->input_bus_cfg.flags;
> -       else if (di->num_bus_formats)
> -               bus_flags = di->bus_flags;
>         else
> -               bus_flags = imxpd->bus_flags;
> +               bus_flags = di->bus_flags;
>
>         bus_fmt = bridge_state->input_bus_cfg.format;
>         if (!imx_pd_format_supported(bus_fmt))
> @@ -203,19 +161,16 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge,
>         return 0;
>  }
>
> -static const struct drm_connector_funcs imx_pd_connector_funcs = {
> -       .fill_modes = drm_helper_probe_single_connector_modes,
> -       .destroy = imx_drm_connector_destroy,
> -       .reset = drm_atomic_helper_connector_reset,
> -       .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> -       .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> -};
> +static int imx_pd_bridge_attach(struct drm_bridge *bridge,
> +                               enum drm_bridge_attach_flags flags)
> +{
> +       struct imx_parallel_display *imxpd = bridge_to_imxpd(bridge);
>
> -static const struct drm_connector_helper_funcs imx_pd_connector_helper_funcs = {
> -       .get_modes = imx_pd_connector_get_modes,
> -};
> +       return drm_bridge_attach(bridge->encoder, imxpd->next_bridge, bridge, flags);
> +}
>
>  static const struct drm_bridge_funcs imx_pd_bridge_funcs = {
> +       .attach = imx_pd_bridge_attach,
>         .atomic_reset = drm_atomic_helper_bridge_reset,
>         .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
>         .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> @@ -240,7 +195,6 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
>                 return PTR_ERR(imxpd_encoder);
>
>         imxpd_encoder->pd = imxpd;
> -       connector = &imxpd_encoder->connector;
>         encoder = &imxpd_encoder->encoder;
>         bridge = &imxpd_encoder->bridge;
>
> @@ -248,28 +202,14 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
>         if (ret)
>                 return ret;
>
> -       /* set the connector's dpms to OFF so that
> -        * drm_helper_connector_dpms() won't return
> -        * immediately since the current state is ON
> -        * at this point.
> -        */
> -       connector->dpms = DRM_MODE_DPMS_OFF;
> -
>         bridge->funcs = &imx_pd_bridge_funcs;
>         drm_bridge_attach(encoder, bridge, NULL, 0);

This should have become DRM_BRIDGE_ATTACH_NO_CONNECTOR. I'll fix it
for v2, if the overall series is thought to be acceptable.

>
> -       if (imxpd->next_bridge) {
> -               ret = drm_bridge_attach(encoder, imxpd->next_bridge, bridge, 0);
> -               if (ret < 0)
> -                       return ret;
> -       } else {
> -               drm_connector_helper_add(connector,
> -                                        &imx_pd_connector_helper_funcs);
> -               drm_connector_init(drm, connector, &imx_pd_connector_funcs,
> -                                  DRM_MODE_CONNECTOR_DPI);
> -
> -               drm_connector_attach_encoder(connector, encoder);
> -       }
> +       connector = drm_bridge_connector_init(drm, encoder);
> +       if (IS_ERR(connector))
> +               return PTR_ERR(connector);
> +
> +       drm_connector_attach_encoder(connector, encoder);
>
>         return 0;
>  }
> @@ -293,12 +233,11 @@ static int imx_pd_probe(struct platform_device *pdev)
>
>         /* port at 1 is the output port */
>         imxpd->next_bridge = devm_drm_of_get_bridge(dev, np, 1, 0);
> +       if (imxpd->next_bridge == ERR_PTR(-ENODEV))
> +               imxpd->next_bridge = devm_imx_drm_legacy_bridge(dev, np, DRM_MODE_CONNECTOR_DPI);
>         if (IS_ERR(imxpd->next_bridge)) {
>                 ret = PTR_ERR(imxpd->next_bridge);
> -               if (ret != -ENODEV)
> -                       return ret;
> -
> -               imxpd->next_bridge = NULL;
> +               return ret;
>         }
>
>         ret = of_property_read_string(np, "interface-pix-fmt", &fmt);
>
> --
> 2.39.2
>


-- 
With best wishes
Dmitry


More information about the dri-devel mailing list