[PATCH 1/2] drm/panel: ltk050h3146w: add MIPI_DSI_MODE_VIDEO to LTK050H3148W flags

[Jessica Zhang]

On 3/20/2024 6:12 AM, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at cherry.de>
> 
> Similar to other variants, the LTK050H3148W wants to run in video mode
> when displaying data. So far only the Synopsis DSI driver was using this
> panel and it is always switching to video mode, independent of this flag
> being set.
> 
> Other DSI drivers might handle this differently, so add the flag.
> 
> Fixes: e5f9d543419c ("drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant")
> Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>

Hi Heiko,

Acked-by: Jessica Zhang <quic_jesszhan at quicinc.com>

Thanks,

Jessica Zhang

> ---
>   drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
> index 30919c872ac8..a50f5330a661 100644
> --- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
> +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
> @@ -326,7 +326,8 @@ static const struct drm_display_mode ltk050h3148w_mode = {
>   static const struct ltk050h3146w_desc ltk050h3148w_data = {
>   	.mode = &ltk050h3148w_mode,
>   	.init = ltk050h3148w_init_sequence,
> -	.mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_VIDEO_BURST,
> +	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> +		      MIPI_DSI_MODE_VIDEO_BURST,
>   };
>   
>   static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx)
> -- 
> 2.39.2
>