[PATCH v6 04/14] drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property

CK Hu (胡俊光) ck.hu at mediatek.com
Mon Mar 25 01:52:27 UTC 2024


Hi, Shawn:

On Fri, 2024-03-22 at 17:02 +0800, CK Hu wrote:
> Hi, Shawn:
> 
> On Fri, 2024-03-22 at 13:28 +0800, Shawn Sung wrote:
> > From: Hsiao Chien Sung <shawn.sung at mediatek.com>
> > 
> > Always add DRM_MODE_ROTATE_0 to rotation property to meet
> > IGT's (Intel GPU Tools) requirement.
> 
> Reviewed-by: CK Hu <ck.hu at mediatek.com>
> 
> > 
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno at collabora.com>
> > Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_ddp_comp.h |  6 +++++-
> >  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 21 +++++++++------------
> >  drivers/gpu/drm/mediatek/mtk_plane.c    |  2 +-
> >  3 files changed, 15 insertions(+), 14 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
> > b/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
> > index 26236691ce4c2..f7fe2e08dc8e2 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
> > +++ b/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
> > @@ -192,7 +192,11 @@ unsigned int
> > mtk_ddp_comp_supported_rotations(struct mtk_ddp_comp *comp)
> >  	if (comp->funcs && comp->funcs->supported_rotations)
> >  		return comp->funcs->supported_rotations(comp->dev);
> >  
> > -	return 0;
> > +	/*
> > +	 * In order to pass IGT tests, DRM_MODE_ROTATE_0 is required
> > when
> > +	 * rotation is not supported.
> > +	 */
> > +	return DRM_MODE_ROTATE_0;
> >  }
> >  
> >  static inline unsigned int mtk_ddp_comp_layer_nr(struct
> > mtk_ddp_comp
> > *comp)
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > index 0ebeaf9830d83..2a767a823c83a 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > @@ -288,6 +288,10 @@ unsigned int mtk_ovl_layer_nr(struct device
> > *dev)
> >  
> >  unsigned int mtk_ovl_supported_rotations(struct device *dev)
> >  {
> > +	/*
> > +	 * although currently OVL can only do reflection,
> > +	 * reflect x + reflect y = rotate 180
> > +	 */

Sorry, this comment is not related to DRM_MODE_ROTATE_0, so after
removing this comment,

Reviewed-by: CK Hu <ck.hu at mediatek.com>

> >  	return DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
> >  	       DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
> >  }
> > @@ -296,27 +300,20 @@ int mtk_ovl_layer_check(struct device *dev,
> > unsigned int idx,
> >  			struct mtk_plane_state *mtk_state)
> >  {
> >  	struct drm_plane_state *state = &mtk_state->base;
> > -	unsigned int rotation = 0;
> >  
> > -	rotation = drm_rotation_simplify(state->rotation,
> > -					 DRM_MODE_ROTATE_0 |
> > -					 DRM_MODE_REFLECT_X |
> > -					 DRM_MODE_REFLECT_Y);
> > -	rotation &= ~DRM_MODE_ROTATE_0;
> > -
> > -	/* We can only do reflection, not rotation */
> > -	if ((rotation & DRM_MODE_ROTATE_MASK) != 0)
> > +	/* check if any unsupported rotation is set */
> > +	if (state->rotation & ~mtk_ovl_supported_rotations(dev))
> >  		return -EINVAL;
> >  
> >  	/*
> >  	 * TODO: Rotating/reflecting YUV buffers is not supported at
> > this time.
> >  	 *	 Only RGB[AX] variants are supported.
> > +	 *	 Since DRM_MODE_ROTATE_0 means "no rotation", we
> > should not
> > +	 *	 reject layers with this property.
> >  	 */
> > -	if (state->fb->format->is_yuv && rotation != 0)
> > +	if (state->fb->format->is_yuv && (state->rotation &
> > ~DRM_MODE_ROTATE_0))
> >  		return -EINVAL;
> >  
> > -	state->rotation = rotation;
> > -
> >  	return 0;
> >  }
> >  
> > diff --git a/drivers/gpu/drm/mediatek/mtk_plane.c
> > b/drivers/gpu/drm/mediatek/mtk_plane.c
> > index a74b26d359857..1723d4333f371 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_plane.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_plane.c
> > @@ -338,7 +338,7 @@ int mtk_plane_init(struct drm_device *dev,
> > struct
> > drm_plane *plane,
> >  		return err;
> >  	}
> >  
> > -	if (supported_rotations & ~DRM_MODE_ROTATE_0) {
> > +	if (supported_rotations) {
> >  		err = drm_plane_create_rotation_property(plane,
> >  							 DRM_MODE_ROTAT
> > E_0,
> >  							 supported_rota
> > tions);
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20240325/e0e6c9d8/attachment-0001.htm>


More information about the dri-devel mailing list