[PATCH] drm/panfrost: fix power transition timeout warnings

[AngeloGioacchino Del Regno]

Il 22/03/24 17:45, Christian Hewitt ha scritto:
> Increase the timeout value to prevent system logs on Amlogic boards flooding
> with power transition warnings:
> 
> [   13.047638] panfrost ffe40000.gpu: shader power transition timeout
> [   13.048674] panfrost ffe40000.gpu: l2 power transition timeout
> [   13.937324] panfrost ffe40000.gpu: shader power transition timeout
> [   13.938351] panfrost ffe40000.gpu: l2 power transition timeout
> ...
> [39829.506904] panfrost ffe40000.gpu: shader power transition timeout
> [39829.507938] panfrost ffe40000.gpu: l2 power transition timeout
> [39949.508369] panfrost ffe40000.gpu: shader power transition timeout
> [39949.509405] panfrost ffe40000.gpu: l2 power transition timeout
> 
> The 2000 value has been found through trial and error testing with devices
> using G52 and G31 GPUs.
> 
> Fixes: 22aa1a209018 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()")
> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
> ---
>   drivers/gpu/drm/panfrost/panfrost_gpu.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c b/drivers/gpu/drm/panfrost/panfrost_gpu.c
> index 9063ce254642..fd8e44992184 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
> @@ -441,19 +441,19 @@ void panfrost_gpu_power_off(struct panfrost_device *pfdev)
>   
>   	gpu_write(pfdev, SHADER_PWROFF_LO, pfdev->features.shader_present);
>   	ret = readl_relaxed_poll_timeout(pfdev->iomem + SHADER_PWRTRANS_LO,
> -					 val, !val, 1, 1000);
> +					 val, !val, 1, 2000);
>   	if (ret)
>   		dev_err(pfdev->dev, "shader power transition timeout");
>   
>   	gpu_write(pfdev, TILER_PWROFF_LO, pfdev->features.tiler_present);
>   	ret = readl_relaxed_poll_timeout(pfdev->iomem + TILER_PWRTRANS_LO,
> -					 val, !val, 1, 1000);
> +					 val, !val, 1, 2000);

Are you sure that you need to raise the timeout for TILER as well?

Cheers,
Angelo

>   	if (ret)
>   		dev_err(pfdev->dev, "tiler power transition timeout");
>   
>   	gpu_write(pfdev, L2_PWROFF_LO, pfdev->features.l2_present);
>   	ret = readl_poll_timeout(pfdev->iomem + L2_PWRTRANS_LO,
> -				 val, !val, 0, 1000);
> +				 val, !val, 0, 2000);
>   	if (ret)
>   		dev_err(pfdev->dev, "l2 power transition timeout");
>   }