Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.39-edid-r1 (root@funky64) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #1 SMP PREEMPT Mon Jun 13 13:06:55 CEST 2011 Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-edid-r1 root=/dev/sda1 ro rootfstype=ext4 acpi_enforce_resources=lax video=DVI-I-1:1024x768@75 log_buf_len=1M BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f680000 (usable) BIOS-e820: 000000007f680000 - 000000007f698000 (ACPI data) BIOS-e820: 000000007f698000 - 000000007f6dc000 (ACPI NVS) BIOS-e820: 000000007f6dc000 - 0000000080000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.5 present. DMI: System manufacturer System Product Name/P6T, BIOS 1303 03/08/2010 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x7f680 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-E3FFF write-protect E4000-EBFFF write-through EC000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F700000 mask FFFF00000 uncachable 2 base 07F800000 mask FFF800000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 found SMP MP-table at [ffff8800000ff780] ff780 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff880000099000] 99000 size 20480 init_memory_mapping: 0000000000000000-000000007f680000 0000000000 - 007f600000 page 2M 007f600000 - 007f680000 page 4k kernel direct mapping tables up to 7f680000 @ 7f67c000-7f680000 ACPI: RSDP 00000000000fad60 00024 (v02 ACPIAM) ACPI: XSDT 000000007f680100 0005C (v01 030810 XSDT1026 20100308 MSFT 00000097) ACPI: FACP 000000007f680290 000F4 (v03 030810 FACP1026 20100308 MSFT 00000097) ACPI: DSDT 000000007f6804b0 0C466 (v01 A1146 A1146001 00000001 INTL 20060113) ACPI: FACS 000000007f698000 00040 ACPI: APIC 000000007f680390 000D8 (v01 030810 APIC1026 20100308 MSFT 00000097) ACPI: MCFG 000000007f680470 0003C (v01 030810 OEMMCFG 20100308 MSFT 00000097) ACPI: OEMB 000000007f698040 00072 (v01 030810 OEMB1026 20100308 MSFT 00000097) ACPI: HPET 000000007f68f4b0 00038 (v01 030810 OEMHPET 20100308 MSFT 00000097) ACPI: OSFR 000000007f68f4f0 000B0 (v01 030810 OEMOSFR 20100308 MSFT 00000097) ACPI: SSDT 000000007f69a330 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000007f680000 NUMA: Using 63 for the hash shift. Initmem setup node 0 0000000000000000-000000007f680000 NODE_DATA [000000007f677000 - 000000007f67bfff] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007ce00000-ffff88007e9fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x0007f680 On node 0 totalpages: 521742 DMA zone: 56 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3921 pages, LIFO batch:0 DMA32 zone: 7079 pages used for memmap DMA32 zone: 510681 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 SMP: Allowing 16 CPUs, 8 hotplug CPUs nr_irqs_gsi: 64 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000) setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff88007f400000 s73984 r8192 d24320 u131072 pcpu-alloc: s73984 r8192 d24320 u131072 alloc=1*2097152 pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 Built 1 zonelists in Node order, mobility grouping on. Total pages: 514602 Policy zone: DMA32 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-edid-r1 root=/dev/sda1 ro rootfstype=ext4 acpi_enforce_resources=lax video=DVI-I-1:1024x768@75 log_buf_len=1M log_buf_len: 1048576 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2049216k/2087424k available (3300k kernel code, 456k absent, 37752k reserved, 1930k data, 576k init) Preemptable hierarchical RCU implementation. Verbose stalled-CPUs detection is disabled. NR_IRQS:1280 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2672.812 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.62 BogoMIPS (lpj=2672812) pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20110316 Setting APIC routing to physical flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 99000 NMI watchdog enabled, takes one hw-pmu counter. #2 smpboot cpu 2: start_ip = 99000 NMI watchdog enabled, takes one hw-pmu counter. #3 smpboot cpu 3: start_ip = 99000 NMI watchdog enabled, takes one hw-pmu counter. #4 smpboot cpu 4: start_ip = 99000 NMI watchdog enabled, takes one hw-pmu counter. #5 smpboot cpu 5: start_ip = 99000 NMI watchdog enabled, takes one hw-pmu counter. #6 smpboot cpu 6: start_ip = 99000 NMI watchdog enabled, takes one hw-pmu counter. #7 smpboot cpu 7: start_ip = 99000 NMI watchdog enabled, takes one hw-pmu counter. Brought up 8 CPUs Total of 8 processors activated (43130.19 BogoMIPS). PM: Registering ACPI NVS region at 7f698000 (278528 bytes) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: SSDT 000000007f6980c0 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113) ACPI: SSDT 000000007f699cd0 00659 (v01 PmRef P001Cst 00003001 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xdfffffff] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600 pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 pci 0000:00:1a.7: reg 10: [mem 0xf7fff000-0xf7fff3ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07] pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883] pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807] pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483] pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f] pci 0000:00:1f.2: reg 24: [mem 0xf7ffc000-0xf7ffc7ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0xf7ffd000-0xf7ffd0ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: [10de:0641] type 0 class 0x000300 pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] pci 0000:02:00.0: reg 24: [io 0xcc00-0xcc7f] pci 0000:02:00.0: reg 30: [mem 0xfbc80000-0xfbcfffff pref] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:07.0: PCI bridge to [bus 03-03] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.0: PCI bridge to [bus 06-06] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200 pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff] pci 0000:05:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit] pci 0000:05:00.0: reg 20: [mem 0xf6ef0000-0xf6efffff 64bit pref] pci 0000:05:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 05-05] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref] pci 0000:04:00.0: [197b:2363] type 0 class 0x000101 pci 0000:04:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff] pci 0000:04:00.0: reg 30: [mem 0xfbde0000-0xfbdeffff pref] pci 0000:04:00.0: PME# supported from D3hot pci 0000:04:00.0: PME# disabled pci 0000:04:00.1: [197b:2363] type 0 class 0x000101 pci 0000:04:00.1: reg 10: [io 0xdc00-0xdc07] pci 0000:04:00.1: reg 14: [io 0xd880-0xd883] pci 0000:04:00.1: reg 18: [io 0xd800-0xd807] pci 0000:04:00.1: reg 1c: [io 0xd480-0xd483] pci 0000:04:00.1: reg 20: [io 0xd400-0xd40f] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.4: PCI bridge to [bus 04-04] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xdfffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) Unable to assume _OSC PCIe control. Disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15) vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes Expanded resource reserved due to conflict with PCI Bus 0000:00 reserve RAM buffer: 000000000009ec00 - 000000000009ffff reserve RAM buffer: 000000007f680000 - 000000007fffffff HPET: 4 timers in total, 0 timers will be used for per-cpu timer Switching to clocksource hpet Switched to NOHz mode on CPU #4 Switched to NOHz mode on CPU #7 Switched to NOHz mode on CPU #6 Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #3 Switched to NOHz mode on CPU #5 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000dffff window] pnp 00:00: [mem 0x7ff00000-0xdfffffff window] pnp 00:00: [mem 0xf0000000-0xfed8ffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfbf00000-0xfbffffff] pnp 00:01: [mem 0xfc000000-0xfcffffff] pnp 00:01: [mem 0xfd000000-0xfdffffff] pnp 00:01: [mem 0xfe000000-0xfebfffff] pnp 00:01: [mem 0xfec8a000-0xfec8afff] pnp 00:01: [mem 0xfed10000-0xfed10fff] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:02: [dma 4] pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0081-0x0083] pnp 00:02: [io 0x0087] pnp 00:02: [io 0x0089-0x008b] pnp 00:02: [io 0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0071] pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x00f0-0x00ff] pnp 00:05: [irq 13] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] pnp 00:06: [io 0x0290-0x029f] system 00:06: [io 0x0290-0x029f] has been reserved system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: [io 0x0010-0x001f] pnp 00:07: [io 0x0022-0x003f] pnp 00:07: [io 0x0044-0x004d] pnp 00:07: [io 0x0050-0x005f] pnp 00:07: [io 0x0062-0x0063] pnp 00:07: [io 0x0065-0x006f] pnp 00:07: [io 0x0072-0x007f] pnp 00:07: [io 0x0080] pnp 00:07: [io 0x0084-0x0086] pnp 00:07: [io 0x0088] pnp 00:07: [io 0x008c-0x008e] pnp 00:07: [io 0x0090-0x009f] pnp 00:07: [io 0x00a2-0x00bf] pnp 00:07: [io 0x00e0-0x00ef] pnp 00:07: [io 0x04d0-0x04d1] pnp 00:07: [io 0x0800-0x087f] pnp 00:07: [io 0x0400-0x03ff disabled] pnp 00:07: [io 0x0500-0x057f] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] pnp 00:07: [mem 0xfed20000-0xfed3ffff] pnp 00:07: [mem 0xfed40000-0xfed8ffff] system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: [io 0x0800-0x087f] has been reserved system 00:07: [io 0x0500-0x057f] has been reserved system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [mem 0xfed00000-0xfed003ff] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:09: [mem 0xffa00000-0xffbfffff] pnp 00:09: [mem 0xffe00000-0xffffffff] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:0a: [mem 0xffc00000-0xffdfffff] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [io 0x0060] pnp 00:0b: [io 0x0064] pnp 00:0b: [mem 0xfec00000-0xfec00fff] pnp 00:0b: [mem 0xfee00000-0xfee00fff] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0xe0000000-0xefffffff] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: [mem 0x00000000-0x0009ffff] pnp 00:0d: [mem 0x000c0000-0x000cffff] pnp 00:0d: [mem 0x000e0000-0x000fffff] pnp 00:0d: [mem 0x00100000-0x7fefffff] pnp 00:0d: [mem 0xfed90000-0xffffffff] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0d: [mem 0x00100000-0x7fefffff] could not be reserved system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:1c.4: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80200000-0x805fffff] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem disabled] pci 0000:00:01.0: bridge window [mem pref disabled] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:07.0: PCI bridge to [bus 03-03] pci 0000:00:07.0: bridge window [io disabled] pci 0000:00:07.0: bridge window [mem disabled] pci 0000:00:07.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI bridge to [bus 06-06] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x805fffff] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 05-05] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 04-04] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:00:1c.4: bridge window [mem 0x80000000-0x801fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 07-07] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0106 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xdfffffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbcfffff] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] pci_bus 0000:06: resource 1 [mem 0x80200000-0x805fffff] pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff] pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff] pci_bus 0000:04: resource 2 [mem 0x80000000-0x801fffff 64bit pref] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:07: resource 8 [mem 0x7ff00000-0xdfffffff] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 pci 0000:02:00.0: Boot video device PCI: CLS 256 bytes, default 64 audit: initializing netlink socket (disabled) type=2000 audit(1308049567.691:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4002 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pcieport 0000:00:1c.4: irq 66 for MSI/MSI-X Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 ahci 0000:00:1f.2: irq 67 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 67 ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 67 ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 67 ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 67 ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 67 ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 67 ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:04:00.0: setting latency timer to 64 scsi6 : ahci scsi7 : ahci ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16 ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16 pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001) pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pata_jmicron 0000:04:00.1: setting latency timer to 64 scsi8 : pata_jmicron scsi9 : pata_jmicron ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i8042: PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata9.00: HPA detected: current 398294975, native 398297088 ata9.00: ATA-7: Maxtor 6B200P0, BAH41BM0, max UDMA/133 ata9.00: 398294975 sectors, multi 0: LBA48 ata9.00: configured for UDMA/100 ata1: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) Refined TSC clocksource calibration: 2672.726 MHz. Switching to clocksource tsc ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: HPA detected: current 321670847, native 321672960 ata5.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 ata5.00: 321670847 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata5.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB) sd 4:0:0:0: Attached scsi generic sg0 type 0 sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 4:0:0:0: [sda] Attached SCSI disk ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) ata6.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 5:0:0:0: Attached scsi generic sg1 type 0 sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 8:0:0:0: Direct-Access ATA Maxtor 6B200P0 BAH4 PQ: 0 ANSI: 5 sd 8:0:0:0: [sdc] 398294975 512-byte logical blocks: (203 GB/189 GiB) sd 8:0:0:0: Attached scsi generic sg2 type 0 sd 8:0:0:0: [sdc] Write Protect is off sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 8:0:0:0: [sdc] Attached SCSI disk sdb: sdb1 sdb2 sdb3 sd 5:0:0:0: [sdb] Attached SCSI disk EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:1. Freeing unused kernel memory: 576k freed udevd[1833]: starting version 171 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:05:00.0: setting latency timer to 64 r8169 0000:05:00.0: irq 68 for MSI/MSI-X r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc90010ade000, e0:cb:4e:81:62:dd, XID 1c4000c0 IRQ 68 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 69 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: ALC1200: BIOS auto-probing. [drm] Initialized drm 1.1.0 20060810 usb 5-1: new full speed USB device number 2 using uhci_hcd nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 nouveau 0000:02:00.0: setting latency timer to 64 [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096080c1) [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:02:00.0: ... appears to be valid [drm] nouveau 0000:02:00.0: BIT BIOS found [drm] nouveau 0000:02:00.0: Bios version 62.94.4b.00 [drm] nouveau 0000:02:00.0: TMDS table version 2.0 [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028 [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030 [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028 [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02021342 00020030 [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD20A [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD657 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE6A7 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE7F0 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEA5C [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEAC1 [drm] nouveau 0000:02:00.0: 0xEAC1: Condition still not met after 20ms, skipping following opcodes hub 5-1:1.0: USB hub found hub 5-1:1.0: 3 ports detected [drm] nouveau 0000:02:00.0: 1 available performance level(s) [drm] nouveau 0000:02:00.0: 3: memory 333MHz core 550MHz shader 1375MHz fanspeed 100% [drm] nouveau 0000:02:00.0: c: memory 399MHz core 400MHz shader 800MHz [TTM] Zone kernel: Available graphics memory: 1024896 kiB. [TTM] Initializing pool allocator. [drm] nouveau 0000:02:00.0: Detected 512MiB VRAM [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. usb 6-2: new full speed USB device number 2 using uhci_hcd i2c i2c-3: sendbytes: NAK bailout. hub 6-2:1.0: USB hub found hub 6-2:1.0: 4 ports detected [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x40000000, bo ffff8800786d0000 fbcon: nouveaufb (fb0) is primary device [drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling Console: switching to colour frame buffer device 128x48 fb0: nouveaufb frame buffer device drm: registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0 usb 7-1: new full speed USB device number 2 using uhci_hcd usb 5-1.1: new full speed USB device number 3 using uhci_hcd lirc_dev: IR Remote Control driver registered, major 251 IR LIRC bridge handler initialized IR keymap rc-rc6-mce not found Registered IR keymap rc-empty input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0/input2 rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0 rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 mceusb 7-1:1.0: Registered Philips eHome Infrared Transceiver on usb7:2 usbcore: registered new interface driver mceusb input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input3 generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.2-1.1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 5-1.2: new full speed USB device number 4 using uhci_hcd input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input4 generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.2-1.2/input0 usb 5-1.3: new full speed USB device number 5 using uhci_hcd Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usb 6-2.1: new low speed USB device number 3 using uhci_hcd Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb usb 5-1.1: input irq status -75 received usb 5-1.1: input irq status -75 received usb 5-1.1: input irq status -75 received input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input5 generic-usb 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input0 EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input6 generic-usb 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input1 usb 6-2.3: new low speed USB device number 4 using uhci_hcd input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input7 generic-usb 0003:045E:0039.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2.3/input0 usb 6-2.4: new full speed USB device number 5 using uhci_hcd input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.4/6-2.4:1.0/input/input8 generic-usb 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.0-2.4/input0 EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdc1): using internal journal EXT3-fs (sdc1): mounted filesystem with writeback data mode input: G15 Extra Keys as /devices/virtual/input/input9 Adding 971928k swap on /dev/sda2. Priority:-1 extents:1 across:971928k r8169 0000:05:00.0: eth0: link down r8169 0000:05:00.0: eth0: link down RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Registering the id_resolver key type r8169 0000:05:00.0: eth0: link up Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast coretemp coretemp.0: TjMax is 97 C. coretemp coretemp.1: TjMax is 97 C. coretemp coretemp.2: TjMax is 97 C. coretemp coretemp.3: TjMax is 97 C. w83627ehf: Found W83667HG chip at 0x290 [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ nouveau 0000:02:00.0: DVI-I-2: EDID invalid. i2c i2c-3: sendbytes: NAK bailout. i2c i2c-3: sendbytes: NAK bailout. [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 51 [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 ff ff ff ff ff ff 00 08 ab 33 32 61 b9 0b 03 ..........32a... <3>31 0f 01 03 0e 46 28 78 2a 3f 44 a6 54 46 99 24 1....F(x*?D.TF.$ <3>13 48 4b bf ee 00 01 01 01 01 01 01 01 01 01 01 .HK............. <3>01 01 01 03 ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 104 [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 ff ff ff ff ff ff 00 08 ab 33 32 61 b9 0b 03 ..........32a... <3>31 0f 01 03 0e 46 28 78 2a 3f 44 a6 54 46 99 24 1....F(x*?D.TF.$ <3>13 48 4b bf ee 00 01 01 01 01 01 01 01 01 01 01 .HK............. <3>01 01 01 01 01 01 01 1d 00 bc 52 d0 1e 20 b8 28 ..........R.. .( <3>55 40 c4 8e 21 01 ff ff ff ff ff ff ff ff ff ff U@..!........... <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ nouveau 0000:02:00.0: DVI-I-2: EDID invalid. [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 129 [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 ff ff ff ff ff ff 00 08 ab 33 32 61 b9 0b 03 ..........32a... <3>31 0f 01 03 0e 46 28 78 2a 3f 44 a6 54 46 99 24 1....F(x*?D.TF.$ <3>13 48 4b bf ee 00 01 01 01 01 01 01 01 01 01 01 .HK............. <3>01 01 01 01 01 01 01 1d 00 bc 52 d0 1e 20 b8 28 ..........R.. .( <3>55 40 c4 8e 21 00 00 1e 00 00 00 fd 00 38 4c 1f U@..!........8L. <3>3d 08 00 0a 20 20 20 20 20 20 00 00 00 ff 00 35 =... .....5 <3>32 35 30 30 30 30 30 30 0a 20 20 20 00 00 ff ff 25000000. .... <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ nouveau 0000:02:00.0: DVI-I-2: EDID invalid. [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ nouveau 0000:02:00.0: DVI-I-2: EDID invalid. i2c i2c-3: sendbytes: NAK bailout. i2c i2c-3: sendbytes: NAK bailout. i2c i2c-3: sendbytes: NAK bailout. [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 135 [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 ff ff ff ff ff ff 00 08 ab 33 32 61 b9 0b 03 ..........32a... <3>31 0f 01 03 0e 46 28 78 2a 3f 44 a6 54 46 99 24 1....F(x*?D.TF.$ <3>13 48 4b bf ee 00 01 01 01 01 01 01 01 01 01 01 .HK............. <3>01 01 01 01 01 01 01 1d 00 bc 52 d0 1e 20 b8 28 ..........R.. .( <3>55 40 c4 8e 21 00 1f ff ff ff ff ff ff ff ff ff U@..!........... <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 96 [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 ff ff ff ff ff ff 00 08 ab 33 32 61 b9 0b 03 ..........32a... <3>31 0f 01 03 0e 46 28 78 2a 3f 44 a6 54 46 99 24 1....F(x*?D.TF.$ <3>13 48 4b bf ee 00 01 01 01 01 01 01 01 01 01 01 .HK............. <3>01 01 01 01 01 01 01 1d 00 bc 52 d0 1e 20 b8 28 ..........R.. .( <3>55 40 c4 8e 21 00 00 1e 00 00 00 fd 00 38 4c 1f U@..!........8L. <3>3d 08 00 0a 20 20 20 20 20 20 00 00 00 ff 00 35 =... .....5 <3>32 35 30 30 30 30 30 7f ff ff ff ff ff ff ff ff 2500000......... <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 105 [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 ff ff ff ff ff ff 00 08 ab 33 32 61 b9 0b 03 ..........32a... <3>31 0f 01 03 0e 46 28 78 2a 3f 44 a6 54 46 99 24 1....F(x*?D.TF.$ <3>13 48 4b bf ee 00 01 01 01 01 01 01 01 01 01 01 .HK............. <3>01 01 01 01 01 01 01 1d 00 bc 52 d0 1e 20 b8 28 ..........R.. .( <3>55 40 c4 8e 21 00 01 ff ff ff ff ff ff ff ff ff U@..!........... <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>00 00 01 ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ nouveau 0000:02:00.0: DVI-I-2: EDID invalid.