Linux version 3.1.0-rc2-00169-g5ccc387 (slyfox@sf) (gcc version 4.4.6 (Gentoo 4.4.6-r1 p1.0, pie-0.4.5) ) #137 SMP PREEMPT Fri Aug 26 18:46:56 EEST 2011 Command line: root=/dev/sda2 video=SVIDEO-1:d BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007e7b0000 (usable) BIOS-e820: 000000007e7b0000 - 000000007e7c5400 (reserved) BIOS-e820: 000000007e7c5400 - 000000007e7e7fb8 (ACPI NVS) BIOS-e820: 000000007e7e7fb8 - 000000007f000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 2510p Notebook PC/30C9, BIOS 68MSP Ver. F.0E 11/04/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x7e7b0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F000000 mask FFF000000 uncachable 2 base 07E800000 mask FFF800000 uncachable 3 base 0FEDA0000 mask FFFFE0000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-000000007e7b0000 0000000000 - 007e600000 page 2M 007e600000 - 007e7b0000 page 4k kernel direct mapping tables up to 7e7b0000 @ 7e7ac000-7e7b0000 ACPI: RSDP 00000000000f7980 00024 (v02 HP ) ACPI: XSDT 000000007e7c81c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 000000007e7c8084 000F4 (v04 HP 30C9 00000003 HP 00000001) ACPI: DSDT 000000007e7c8538 13484 (v01 HP nc2500 00010000 MSFT 03000001) ACPI: FACS 000000007e7e7d80 00040 ACPI: SLIC 000000007e7c8244 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: HPET 000000007e7c83bc 00038 (v01 HP 30C9 00000001 HP 00000001) ACPI: APIC 000000007e7c83f4 00068 (v01 HP 30C9 00000001 HP 00000001) ACPI: MCFG 000000007e7c845c 0003C (v01 HP 30C9 00000001 HP 00000001) ACPI: TCPA 000000007e7c8498 00032 (v02 HP 30C9 00000001 HP 00000001) ACPI: ASF! 000000007e7c84cc 00069 (v16 HP CHIMAYU 00000001 HP 00000000) ACPI: SSDT 000000007e7db9bc 002BE (v01 HP HPQPAT 00000001 MSFT 03000001) ACPI: SSDT 000000007e7dc5fe 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) ACPI: SSDT 000000007e7dc85d 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) ACPI: SSDT 000000007e7dc903 004D7 (v01 HP CpuPm 00003000 INTL 20060317) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007be00000-ffff88007ddfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007e7b0 On node 0 totalpages: 517951 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 8031 pages used for memmap DMA32 zone: 505937 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at 7f000000 (gap: 7f000000:7fc00000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88007e400000 s69760 r8192 d24448 u1048576 pcpu-alloc: s69760 r8192 d24448 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 509851 Kernel command line: root=/dev/sda2 video=SVIDEO-1:d PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 2026004k/2072256k available (4312k kernel code, 452k absent, 45800k reserved, 4245k data, 452k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:320 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1197.030 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.06 BogoMIPS (lpj=1197030) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20110623 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU U7600 @ 1.20GHz stepping 0d Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. PEBS disabled due to CPU errata. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 Ok. smpboot cpu 1: start_ip = 9a000 CPU1: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. Brought up 2 CPUs Total of 2 processors activated (4787.95 BogoMIPS). NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: SSDT 000000007e7dbd42 0023D (v01 HP Cpu0Ist 00003000 INTL 20060317) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0023D (v01 HP Cpu0Ist 00003000 INTL 20060317) ACPI: SSDT 000000007e7dc004 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) ACPI: SSDT 000000007e7dbc7a 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) ACPI: SSDT 000000007e7dbf7f 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources ACPI: Power Resource [C29F] (on) ACPI: Power Resource [C1C7] (off) ACPI: Power Resource [C3AD] (off) ACPI: Power Resource [C3B0] (off) ACPI: Power Resource [C3C3] (off) ACPI: Power Resource [C3C4] (off) ACPI: Power Resource [C3C5] (off) ACPI: Power Resource [C3C6] (off) ACPI: Power Resource [C3C7] (off) ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x7e800000-0xfedfffff] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xe0400000-0xe04fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x2000-0x2007] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 pci 0000:00:02.1: reg 10: [mem 0xe0500000-0xe05fffff 64bit] pci 0000:00:03.0: [8086:2a04] type 0 class 0x000780 pci 0000:00:03.0: reg 10: [mem 0xe0600000-0xe060000f 64bit] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: [8086:2a06] type 0 class 0x000101 pci 0000:00:03.2: reg 10: [io 0x2008-0x200f] pci 0000:00:03.2: reg 14: [io 0x2010-0x2013] pci 0000:00:03.2: reg 18: [io 0x2018-0x201f] pci 0000:00:03.2: reg 1c: [io 0x2020-0x2023] pci 0000:00:03.2: reg 20: [io 0x2030-0x203f] pci 0000:00:03.3: [8086:2a07] type 0 class 0x000700 pci 0000:00:03.3: reg 10: [io 0x2040-0x2047] pci 0000:00:03.3: reg 14: [mem 0xe0601000-0xe0601fff] pci 0000:00:19.0: [8086:1049] type 0 class 0x000200 pci 0000:00:19.0: reg 10: [mem 0xe0620000-0xe063ffff] pci 0000:00:19.0: reg 14: [mem 0xe0640000-0xe0640fff] pci 0000:00:19.0: reg 18: [io 0x2060-0x207f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 pci 0000:00:1a.0: reg 20: [io 0x2080-0x209f] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 pci 0000:00:1a.1: reg 20: [io 0x20a0-0x20bf] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 pci 0000:00:1a.7: reg 10: [mem 0xe0641000-0xe06413ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xe0644000-0xe0647fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x20c0-0x20df] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x20e0-0x20ff] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x2100-0x211f] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xe0648000-0xe06483ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:2811] type 0 class 0x000601 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0x2120-0x212f] pci 0000:00:1c.0: PCI bridge to [bus 08-08] pci 0000:10:00.0: [8086:4229] type 0 class 0x000280 pci 0000:10:00.0: reg 10: [mem 0xe0000000-0xe0001fff 64bit] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold pci 0000:10:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 10-10] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff] pci 0000:02:06.0: [1180:0476] type 2 class 0x000607 pci 0000:02:06.0: proprietary Ricoh MMC controller disabled (via cardbus function) pci 0000:02:06.0: MMC cards are now supported by standard SDHCI controller pci 0000:02:06.0: reg 10: [mem 0xe0100000-0xe0100fff] pci 0000:02:06.0: supports D1 D2 pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.0: PME# disabled pci 0000:02:06.1: [1180:0832] type 0 class 0x000c00 pci 0000:02:06.1: reg 10: [mem 0xe0101000-0xe01017ff] pci 0000:02:06.1: supports D1 D2 pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.1: PME# disabled pci 0000:02:06.2: [1180:0822] type 0 class 0x000805 pci 0000:02:06.2: reg 10: [mem 0xe0102000-0xe01020ff] pci 0000:02:06.2: supports D1 D2 pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.2: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xe0100000-0xe03fffff] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x7e800000-0xfedfffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci 0000:00:1c.0: Dev MPS 128 MPSS 128 MRRS 128 pci 0000:00:1c.0: Dev MPS 128 MPSS 128 MRRS 128 pci 0000:00:1c.1: Dev MPS 128 MPSS 128 MRRS 128 pci 0000:00:1c.1: Dev MPS 128 MPSS 128 MRRS 128 pci 0000:10:00.0: Dev MPS 128 MPSS 128 MRRS 128 pci 0000:10:00.0: Dev MPS 128 MPSS 128 MRRS 128 pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC control (0x1d) granted ACPI: PCI Interrupt Link [C12F] (IRQs *10 11) ACPI: PCI Interrupt Link [C130] (IRQs *10 11) ACPI: PCI Interrupt Link [C131] (IRQs 10 *11) ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C142] (IRQs *10 11) ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C144] (IRQs 10 *11) ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110623/pci_link-184) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes Expanded resource reserved due to conflict with PCI Bus 0000:00 reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007e7b0000 - 000000007fffffff HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0x7e7fffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 system 00:00: [mem 0x00100000-0x7e7fffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0x7e800000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: [io 0x00f0-0x00ff] pnp 00:02: [irq 13] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0080-0x008f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x0070-0x0071] pnp 00:05: [io 0x0072-0x0073] pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [mem 0xfed00000-0xfed003ff] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0130 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0024-0x003f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0050-0x0053] pnp 00:09: [io 0x0063] pnp 00:09: [io 0x0065] pnp 00:09: [io 0x0067] pnp 00:09: [io 0x0074-0x0077] pnp 00:09: [io 0x0090-0x009f] pnp 00:09: [io 0x00a4-0x00bd] pnp 00:09: [io 0x0500-0x057f] pnp 00:09: [io 0x0800-0x080f] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x0500-0x057f] has been reserved system 00:09: [io 0x0800-0x080f] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [irq 23] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x04d0-0x04d1] pnp 00:0b: [io 0x02f8-0x02ff] pnp 00:0b: [io 0x03f8-0x03ff] pnp 00:0b: [io 0x1000-0x107f] pnp 00:0b: [io 0x1100-0x113f] pnp 00:0b: [io 0x1200-0x121f] pnp 00:0b: [mem 0xf8000000-0xfbffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed20000-0xfed3ffff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] pnp 00:0b: [mem 0xfed90000-0xfed99fff] system 00:0b: [io 0x04d0-0x04d1] has been reserved system 00:0b: [io 0x02f8-0x02ff] has been reserved system 00:0b: [io 0x03f8-0x03ff] has been reserved system 00:0b: [io 0x1000-0x107f] has been reserved system 00:0b: [io 0x1100-0x113f] has been reserved system 00:0b: [io 0x1200-0x121f] has been reserved system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: [mem 0xfed90000-0xfed99fff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cee00-0x000cffff] pnp 00:0c: [mem 0xfeda0000-0xfedbffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cee00-0x000cffff] has been reserved system 00:0c: [mem 0xfeda0000-0xfedbffff] has been reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref] pci 0000:00:1e.0: BAR 7: assigned [io 0x3000-0x3fff] pci 0000:00:1c.0: PCI bridge to [bus 08-08] pci 0000:00:1c.1: PCI bridge to [bus 10-10] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff] pci 0000:02:06.0: BAR 10: assigned [mem 0x84000000-0x87ffffff] pci 0000:02:06.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref] pci 0000:02:06.0: BAR 8: assigned [io 0x3000-0x30ff] pci 0000:02:06.0: BAR 7: assigned [io 0x3400-0x34ff] pci 0000:02:06.0: CardBus bridge to [bus 03-06] pci 0000:02:06.0: bridge window [io 0x3400-0x34ff] pci 0000:02:06.0: bridge window [io 0x3000-0x30ff] pci 0000:02:06.0: bridge window [mem 0x80000000-0x83ffffff pref] pci 0000:02:06.0: bridge window [mem 0x84000000-0x87ffffff] pci 0000:00:1e.0: PCI bridge to [bus 02-03] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xe0100000-0xe03fffff] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x7e800000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:10: resource 1 [mem 0xe0000000-0xe00fffff] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe03fffff] pci_bus 0000:02: resource 2 [mem 0x80000000-0x83ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0x7e800000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x3400-0x34ff] pci_bus 0000:03: resource 1 [io 0x3000-0x30ff] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref] pci_bus 0000:03: resource 3 [mem 0x84000000-0x87ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 microcode: Microcode Update Driver: v2.00 , Peter Oruba HugeTLB registered 2 MB page size, pre-allocated 0 pages Btrfs loaded msgmni has been set to 3957 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt pci 0000:10:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded intel_idle: MWAIT substates: 0x22220 intel_idle: does not run on family 6 model 15 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 8192K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: quirky BIOS, skipping spindown on poweroff and hibernation ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2120 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2128 irq 15 ata2: port disabled--ignoring console [netcon0] enabled netconsole: network logging started ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.1.0-rc2-00169-g5ccc387 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0648000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.1.0-rc2-00169-g5ccc387 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00002080 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.1.0-rc2-00169-g5ccc387 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x000020a0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.1.0-rc2-00169-g5ccc387 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x000020c0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.1.0-rc2-00169-g5ccc387 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 22, io base 0x000020e0 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 3.1.0-rc2-00169-g5ccc387 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002100 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 3.1.0-rc2-00169-g5ccc387 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usbcore: registered new interface driver libusual i8042: PNP: PS/2 Controller [PNP0303:C29C,PNP0f13:C29D] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata1.00: ATA-8: SAMSUNG HM641JI, 2AJ10001, max UDMA/133 ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM641JI 2AJ1 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb 5-2: new full speed USB device number 2 using uhci_hcd usb 5-2: New USB device found, idVendor=08ff, idProduct=2580 usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 5-2: Product: Fingerprint Sensor input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1 Refined TSC clocksource calibration: 1196.999 MHz. Switching to clocksource tsc Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2 device label SF_ROOT devid 1 transid 27433 /dev/root btrfs: disk space caching is enabled VFS: Mounted root (btrfs filesystem) readonly on device 0:12. Freeing unused kernel memory: 452k freed Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 1812k freed Freeing unused kernel memory: 420k freed udevd[796]: starting version 171 ACPI: Fan [C3B1] (off) ACPI: Fan [C3B2] (off) ACPI: Fan [C3C8] (off) ACPI: Fan [C3C9] (off) ACPI: Fan [C3CA] (off) ACPI: Fan [C3CB] (off) ACPI: Fan [C3CC] (off) snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [C23B] (off-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 ACPI: Sleep Button [C2BF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 ACPI: Lid Switch [C155] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 ACPI: Power Button [PWRF] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k e1000e: Copyright(c) 1999 - 2011 Intel Corporation. cfg80211: Calling CRDA to update world regulatory domain ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [C23D] (battery present) thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ6] (25 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ0] (58 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ1] (57 C) thermal LNXTHERM:03: registered as thermal_zone3 ACPI: Thermal Zone [TZ3] (47 C) thermal LNXTHERM:04: registered as thermal_zone4 ACPI: Thermal Zone [TZ4] (40 C) thermal LNXTHERM:05: registered as thermal_zone5 ACPI: Thermal Zone [TZ5] (18 C) ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 43 for MSI/MSI-X yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c9] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: iwl4965: Copyright(c) 2003-2011 Intel Corporation iwl4965 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl4965 0000:10:00.0: setting latency timer to 64 iwl4965 0000:10:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman [drm] Initialized drm 1.1.0 20060810 iwl4965 0000:10:00.0: device EEPROM VER=0x36, CALIB=0x5 iwl4965 0000:10:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwl4965 0000:10:00.0: irq 44 for MSI/MSI-X e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:68:51:e5:60 e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cb8, PCI irq 18 yenta_cardbus 0000:02:06.0: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 sdhci-pci 0000:02:06.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 sdhci-pci 0000:02:06.2: Will use DMA mode even though HW doesn't fully claim to support it. Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:02:06.2] using DMA iwl4965 0000:10:00.0: loaded firmware version 228.61.2.24 Registered led device: phy0-led ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 45 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0xb8/0xf0() Hardware name: HP Compaq 2510p Notebook PC sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1/intel_backlight' Modules linked in: i915(+) drm_kms_helper drm sdhci_pci sdhci iwl4965 yenta_socket pcmcia_core iwl_legacy mmc_core mac80211 snd_hda_codec_analog processor i2c_algo_bit thermal pcmcia_rsrc container cfg80211 e1000e battery button ac rfkill snd_hda_intel fan snd_hda_codec snd_hwdep Pid: 828, comm: modprobe Not tainted 3.1.0-rc2-00169-g5ccc387 #137 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] sysfs_add_one+0xb8/0xf0 [] create_dir+0x7c/0xd0 [] sysfs_create_dir+0x7c/0xd0 [] ? sub_preempt_count+0x9d/0xd0 [] kobject_add_internal+0xbd/0x200 [] kobject_add_varg+0x38/0x60 [] kobject_add+0x44/0x70 [] ? kobject_get+0x1a/0x30 [] device_add+0x98/0x690 [] ? pm_runtime_init+0xd1/0xe0 [] ? device_pm_init+0x59/0x80 [] device_register+0x19/0x20 [] backlight_device_register+0xf1/0x1c0 [] intel_panel_setup_backlight+0x73/0xf0 [i915] [] ? intel_crt_init+0xeb/0x1d0 [i915] [] intel_modeset_init+0x7c9/0x1100 [i915] [] i915_driver_load+0xc81/0x1170 [i915] [] ? drm_sysfs_device_add+0x81/0xb0 [drm] [] ? kobject_uevent_env+0x1b7/0x470 [] ? drm_get_minor+0x243/0x300 [drm] [] drm_get_pci_dev+0x188/0x2b0 [drm] [] ? sub_preempt_count+0x9d/0xd0 [] i915_pci_probe+0x1b/0x13f [i915] [] local_pci_probe+0x5a/0xd0 [] pci_device_probe+0x80/0xb0 [] ? driver_sysfs_add+0x7a/0xb0 [] driver_probe_device+0x96/0x1c0 [] ? driver_probe_device+0x1c0/0x1c0 [] __driver_attach+0x93/0xa0 [] ? driver_probe_device+0x1c0/0x1c0 [] bus_for_each_dev+0x68/0x90 [] driver_attach+0x19/0x20 [] bus_add_driver+0x198/0x260 [] driver_register+0x78/0x140 [] __pci_register_driver+0x51/0xd0 [] drm_pci_init+0x119/0x130 [drm] [] ? 0xffffffffa02adfff [] i915_init+0x8b/0x8d [i915] [] do_one_initcall+0x3e/0x170 [] sys_init_module+0x8a/0x1e0 [] system_call_fastpath+0x16/0x1b ---[ end trace 1c7dd79996e79e7a ]--- kobject_add_internal failed for intel_backlight with -EEXIST, don't try to register things with the same name in the same directory. Pid: 828, comm: modprobe Tainted: G W 3.1.0-rc2-00169-g5ccc387 #137 Call Trace: [] kobject_add_internal+0x15b/0x200 [] kobject_add_varg+0x38/0x60 [] kobject_add+0x44/0x70 [] ? kobject_get+0x1a/0x30 [] device_add+0x98/0x690 [] ? pm_runtime_init+0xd1/0xe0 [] ? device_pm_init+0x59/0x80 [] device_register+0x19/0x20 [] backlight_device_register+0xf1/0x1c0 [] intel_panel_setup_backlight+0x73/0xf0 [i915] [] ? intel_crt_init+0xeb/0x1d0 [i915] [] intel_modeset_init+0x7c9/0x1100 [i915] [] i915_driver_load+0xc81/0x1170 [i915] [] ? drm_sysfs_device_add+0x81/0xb0 [drm] [] ? kobject_uevent_env+0x1b7/0x470 [] ? drm_get_minor+0x243/0x300 [drm] [] drm_get_pci_dev+0x188/0x2b0 [drm] [] ? sub_preempt_count+0x9d/0xd0 [] i915_pci_probe+0x1b/0x13f [i915] [] local_pci_probe+0x5a/0xd0 [] pci_device_probe+0x80/0xb0 [] ? driver_sysfs_add+0x7a/0xb0 [] driver_probe_device+0x96/0x1c0 [] ? driver_probe_device+0x1c0/0x1c0 [] __driver_attach+0x93/0xa0 [] ? driver_probe_device+0x1c0/0x1c0 [] bus_for_each_dev+0x68/0x90 [] driver_attach+0x19/0x20 [] bus_add_driver+0x198/0x260 [] driver_register+0x78/0x140 [] __pci_register_driver+0x51/0xd0 [] drm_pci_init+0x119/0x130 [drm] [] ? 0xffffffffa02adfff [] i915_init+0x8b/0x8d [i915] [] do_one_initcall+0x3e/0x170 [] sys_init_module+0x8a/0x1e0 [] system_call_fastpath+0x16/0x1b [drm:intel_panel_setup_backlight] *ERROR* Failed to register backlight: -17 [drm] initialized overlay support [drm] forcing SVIDEO-1 connector OFF fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device drm: registered panic notifier ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20110623/exoparg2-418) ACPI Error: Method parse/execution failed [\_SB_.C003.C09A._DOD] (Node ffff88007b832988), AE_AML_PACKAGE_LIMIT (20110623/psparse-536) ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20110623/video-1147) acpi device:01: registered as cooling_device9 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 ACPI: Video Device [C09A] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. fuse init (API version 7.16) loop: module loaded btrfs: enabling auto defrag Adding 2096476k swap on /dev/sda3. Priority:-1 extents:1 across:2096476k CE: hpet increased min_delta_ns to 20113 nsec e1000e 0000:00:19.0: irq 43 for MSI/MSI-X e1000e 0000:00:19.0: irq 43 for MSI/MSI-X